Can not capture under Win7

If you find that capturing is no longer possible under Win7, you may take this step to remedy the situation.
Try changing your firewire driver. There's 3 drivers bundled in windows 7, change the driver to the one that has (Legacy) at the end of the name.

Thanks Harm,
Was very helpfull.

Similar Messages

  • Can not capture from Sony HDV 1080i (recording in 60i)

    Hello
    We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
    The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
    We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

    This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
    First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
    FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
    http://docs.info.apple.com/article.html?artnum=301852
    Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
    If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
    Still not working? Try a different Firewire cable.
    Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
    Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
    Let us know how you get on!
    Andy
    Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Can not capture

    Upgraded Premiere Pro, Have bought  the new mac computer. Using a Canon DV camera, and can not capture any footage from my DV tapes. Have tried everything!!! Premiere just say Capture Device Offline,. Read through many threads and have got no idea how to fix. Help me Please... I just bought this MAC and now its useless if i can't use it to edit
    Even tried all the steps on the web bpage, i do not have a firewire, the USB port i use to plug in are through an AV device (yellow, red, white cables) that then filter through top a USB port cable and plugged into the back of my computer.

    I mean it's the new Mac do it's just a thin screen, I would rather leave it and have an external cord.
    Why has Mac not allowed for this, they are suppose to be the best & up to date with video software?
    Unfortunately, Apple knows best, and will dictate that to its loyal users. They must adapt to the "party line," or move to a PC. That is just the way they think.
    Sorry for the bad news,
    Hunt

  • Can not capture with CS6 and blackmagic multibridge pro on HP Z820

    This is the setup:
    Z820 and Windows 7 pro
    Multibridge Pro and driver 9.7.7
    CS6.0.5
    In premiere I can not capture via the Multibridge. The app crash when entering capture mode. I can not change setting in my capture device.
    On the same PC I CAN capture with Media Composer v7 and BM Media Express.
    I've tried several version of the BM driver, no changes.
    The BM PCIe card is in slot 1 and the PC bios I have update to v3.50.
    Anyone having the same experience?
    Regards
    Danny

    Thanks for the reply. I know YouTube is not the way to check quality but it shows the stutter in playback. The quality wasn't the issue and it is filmed with my phone. The video shows what it needs to show.
    Disk setup is a ddp server (check http://www.dynamicdrivepool.com/ for info) connected with 2 network cables for optimal speed.
    Video cars is a NVIDIA Quadro K4000.
    Premiere Pro CC is up to date with the latest version.
    Export settings? I think you mean sequence settings:
    For the record: I'm not trying to play a sequence with multiple layers of video of different codecs and loaded with effects. It's just a video chopped to pieces and an adjustment layer with some simple effects. The way Adobe is advertising the performance of Premiere Pro, one would think that couldn't be a problem for any Z820. Or that's what I was thinking. Hope you or anyone can help.

  • CHM does not display under Win7 64bit

    Hi all,
    the CHMs generated unter Win 7 32bit do not open correctly under Windows 7 Enterprise SP1 64bit. The CHM viewer opens and the TOC is visible, but all pages are empty (white, no error message). The CHM is stored locally. The same CHM can be viewed without problems under Win7 32bit.
    Any ideas about this?
    Robert

    Wrong information - sorry! The CHMs were generated under Windows 7 Enterprise 64bit as well. That means they do not display on the same computer they were gnerated on, but under other systems that have 32bit OS (Win7 or XP).

  • Pci-6602 VI can not work on win7

    Hi
    I have a vi output fix frequence through pci6602, it is can be worked on win xp and labview 8.5, but after upgrade to win7/labview 2013/Daqmax 9.7, these SubVis of 6602 are changed, so this Vi can not be worked. is there anyone can kindly help me? thanks
    Best Regards
    Rex
    Solved!
    Go to Solution.

    Hi GerdW
    thanks,
    I have upload a atteched file, but I can not see it too. try again...
    I think I know where is the problem, maybe it caused by TraditionalDAQ not installed.
    but I have tried to rewrite a new vi output frequence through 6602 under DAQMAX, but not successed. do you have any example for me if possible.
    Attachments:
    pci-6602 Vi error.7z ‏1415 KB

  • ODI can not capture RRN (rowid)  in DB2/iSeries

    HI, all . I found that we can not config ODI to get the RRN (rowid) when CDC by reading journal . Any idea ?

    Hi, Thanks for your reply . it's great help .Please help me with these concerns :
    1. If ODI can capture missed transaction journal ,they must know the last journal 's information of a table .where these information stored ? In ODI Reposistory ?
    2.For CDC , if the source database is restored by the backup set of yesterday .Can ODI re-synchronized these change to the target datase or we have re run Load data ?
    4.For journalling in DB2 , If the changes are created by a mirror tool from another DB2 database , does these changes are recorded in native journal ?
    3.We have a target table is partitioned by date time ranged , the data in the target table is OFFLINE if the data is <sysdate -90 .
    The source table in DB2 is not partitioned , data is fully ONLINE , if there are some DML happend in the data which older than sysdate-90 in the source table , how can these change reflect to the target table ?
    4.Can CDC installed in MySQL , we have several MySQL Database
    5. We would like to use native journal , not trigger in CDC for source database in DB2 . We found that there are some limitation of native journal , such as the number of primary key columns must be not exceed 16 .
    For a given physical file( a table) in DB2 , it has the number of primary key 's column are 18 ( dued to the designed is created in 2000) , we found some error when declare primary key in source table in ODI Designer .
    How can we overcome this limitation ?
    6.Can ODI capture TRUNCATE command in DB2 source database ?

  • Help, I can not capture Audio Pinnacle to a flash media player encoder 2.5

    Help Please ...... As you can do to capture in Adobe Flash
    Media Encoder 2.5 audio moviebox A Pinnacle Studio Plus, since only
    TE Tom THE video, but does not capture the audio, and therefore I
    have a delay in the video against Audi. Do I configure Encoder
    2.5.

    Here is the fix:
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=29191

  • Desk top pc windows 7 ultimate, after update of itunes can not open under my account shows up very light on task bar but opens fine under my wifes account on same computer

    Windows 7 ultimate, after update can not open itunes under my account shows up very light on task bar, but opens fine under other accounts on same computer

    Hi M0M1!
    I have an article for you that seems to describe your issue and can provide some helpful troubleshooting steps for this issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Specifically, you will want to focus on this section of the article:
    User-specific troubleshooting
    If you experience the issue in one particular user account, the suggestions below may resolve the issue. Before proceeding, you'll need to make hidden files and folder visible in Windows using steps 1-5.
    Remove iTunes Preference files. Some of the files that iTunes stores settings and preferences in may be unusable. iTunes saves its preferences in two folders. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The locations for the preference folders are:
    c:\Users\username\AppData\Local\Apple Computer\iTunes
    c:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Create a new iTunes Library.
    Hold the Shift key while opening iTunes. You'll be asked to choose an iTunes library.
    Choose Create Library.
    In the following window, select a location to save the new iTunes Library.
    Click Save. iTunes will open the new library. After you close iTunes, you can always select the original library by holding the Shift key while opening iTunes.
    Recreate your iTunes Library. If your iTunes library has become unusable, rebuilding it may resolve the issue.
    Check for issues with content files. Sometimes an audio file can cause iTunes to quit unexpectedly or stop responding when it's analyzing gapless playback information. To determine which file may be causing the issue, follow the steps below:
    Quit iTunes.
    Navigate to the iTunes folder:
    Windows Vista: c:\users\username\Music\iTunes
    Windows 7 and Windows 8: c:\users\username\My Music\iTunes
    Move the iTunes Library.itl file to your desktop.
    Open iTunes. You shouldn't see any content in iTunes.
    Choose File > Add Folder to Library.
    Navigate to the folder where your music is located:
    Windows Vista: c:\users\username\Music\iTunes\iTunes Media
    Windows 7 and Windows 8: c:\users\username\My Music\iTunes\iTunes Media
    Choose an artist, album, or song to add to the library.
    Wait for iTunes to successfully add the item to your library and perform the gapless playback scan.
    If successful, continue adding songs to your library.
    If there is an issue with one of your files, you'll notice your issue reappear after you add it to the library. You should repeat these steps, being careful not to add the files that caused the issue.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Unable to initialize video deck, (can not capture from camera)

    Hello All,
    I am using a quad core G5 and am trying to capture some footage into Final Cut Pro version 5.0. I have two Panasonic DVX 100B mini DV cameras. I normally capture with a JVC BR-DV3000 mini DV deck but it is currently not working. So I'm trying to capture using my camera.
    I hooked my camera up to my computer via firewire and started final cut, When I click File > Log and capture a little window pops up that reads:
    " Unable to initialize video deck. You may still log offline clips or use Capture Now"
    I'm not sure why this box is appearing. When I click the capture now button, the Capture window pops up and then I press play on the video camera and the footage plays on the camera but the capture window remains black or empty. I have tried both cameras and two different firewire cables with the same results. I have also tried to restart the computer.
    Can anyone shine some light on this situation?
    Thank you so much for your help.
    Mike Wardynski

    Are there any other firewire devices connected to your Mac?
    Did you go into your easy setup and reselect the DV setting for the standard you are using?
    Also sometimes, shutting down and restarting your Mac, after making these changes some times allows the new device to be recognized.
    One other thing, the DV camera may have a menu setting that needs to be set for communication via firewire possibly?

  • Can not capture. Anymore.

    Ok so I have a Sony HC52 and I'm using an ilink firewire cable to capture my footage. I have been able to capture for months and then the other day it stopped working. When I connect the camera with the ilink cable and try to capture, FCP does not recognize the camera. I tried capturing with QuickTime Pro also and the camera is still not recognized. As far as I know there are no drivers needed for the ilink cable. Does anyone know what’s going on? Or has anyone else had this problem? ANY help would be appreciated. Thanks.

    have you tested another Firewire DV cable to see if the cable is bad? Have you tested that Firewire port on the computer with another hard drive to make sure it's working? You can also go into System Profiler and check to see if the computer recognizes that a device is plugged into that port.
    BTW, how is Seattle looking right now. I love it there. Lived just outside for a year and it is my favorite city in the US.
    Message was edited by: RedTruck

  • Can not Capture on Quad

    Greetings all. I have a Canon GL2. I am having trouble capturing with it on my Quad. After searching the forum I see that for some reason people are having trouble capturing with Canon products. What's weird is that I can capture on my Powerbook which has the same exact OS and software but not on the Quad. Is there a reason for this? FCP does not recognize the camera in Capture 'mode' but will not start up (when the camera is plugged in via firewire) until the camera is disconnected. What's going on?
    Further, imovie doesn't recognize the camera either.
    Would a capture card make capturing more stable? This is very frustrating.

    Time for the Harpoon solution.
    shut down the computer
    turn of any external drives
    turn off the camera
    unplug the computer from the power
    unplug the firewire devices from the computer (remove cables from ports)
    get up from computer
    walk to refrigerator
    grab your favorite beverage
    enjoy beverage
    if 5 minutes are not up - enjoy another beverage
    walk back to edit area
    plug in firewire devices & computer power
    start camera
    start computer
    launch FCP
    attempt capture.
    Does it work now?
    If yes, enjoy life.
    If no, does it capture in iMovie
    If yes, you probably need to reinstall quicktime - if running 7.0.4 try downgrading to 7.0.1
    If no, you have other issues. Try removing any external firewire drives, swapping cables or cameras.
    Good luck.
    x

  • Can not capture in 16x9

    New to FCE (no problems with this in iMovie) but when I capture the video (shoot in HD 16x9) it shows during capturing in 4x3. I used Easy Setup Format PAL and DV-PAL-FireWire Basic. It should be so easy it said...?
    Any useful tips?
    Camera Panasonic NV-GS80 (DV)
    //Torsten

    Hi(Bonjour)!
    This model use mini-DV. So you've shoot in anamorphic (16:9 or wide screen) format. Not HD.
    You should use DV PAL anamorphic setting.
    Does the anamorphic checkmark property is turned on for clip in browser (use the +item properties+ command with Control click on clip itself in browser)
    Michel Boissonneault
    Message was edited by: Michel Boissonneault

  • Why my bootcamp service can not startup in Win7?

    no icon in the tray and can't using any fn key.
    how to fix the problem?i am now click the bootcamp.exe to start the service every time...
    i've checked the boot services list,the bootcamp already listed.but why ....
    someone can help me? (win 7 32bit .bootcamp 3.2)

    NO ONE KNOWS?

  • NO FIREWIRE! MacBook can not capture video for editing...Help!

    I bought a New Unibody Macbook last week. Then I realized that my New Video Camera (Canon Vixia HV30) is not compatible with the MacBook as it has no Firewire. So I called apple to discuss returning it for a Macbook Pro. But upon examining the specs for the MacbookPro I discovered that it only has Firewire 800 which is not cross compatible with Firewire 400. So that computer will ot help me either. Apparently the manufactures of video cameras are way behind Apple in its adoption of firewire 800. (note USB2.0 is not designed for video, it is a burst based protocol and not nearly as fast for continuous data streams, like digitizing video)
    Does anyone know of...
    1) A Video Camera that uses Firewire 800
    2) An adapter from 400 to 800?
    Any help would be very appreciated.

    I have been pretty ticked off about Apple's direction myself as I own an audio and video business which relies heavily on FW400 for my cameras and sound cards. I am fortunate to have the older 17" MacBook Pro with both Firewire's built in, but I was thinking to myself, what would I do if I had to purchase now. This is what I would do:
    I would get a MacBook Pro and purchase at $32.00 Fire Wire ExpressCard/34. Gives you 2-Firewire 400's. Heck for $30.00 you get two ports. Not bad at all!

Maybe you are looking for