Can not capture

Upgraded Premiere Pro, Have bought  the new mac computer. Using a Canon DV camera, and can not capture any footage from my DV tapes. Have tried everything!!! Premiere just say Capture Device Offline,. Read through many threads and have got no idea how to fix. Help me Please... I just bought this MAC and now its useless if i can't use it to edit
Even tried all the steps on the web bpage, i do not have a firewire, the USB port i use to plug in are through an AV device (yellow, red, white cables) that then filter through top a USB port cable and plugged into the back of my computer.

I mean it's the new Mac do it's just a thin screen, I would rather leave it and have an external cord.
Why has Mac not allowed for this, they are suppose to be the best & up to date with video software?
Unfortunately, Apple knows best, and will dictate that to its loyal users. They must adapt to the "party line," or move to a PC. That is just the way they think.
Sorry for the bad news,
Hunt

Similar Messages

  • Can not capture from Sony HDV 1080i (recording in 60i)

    Hello
    We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
    The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
    We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

    This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
    First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
    FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
    http://docs.info.apple.com/article.html?artnum=301852
    Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
    If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
    Still not working? Try a different Firewire cable.
    Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
    Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
    Let us know how you get on!
    Andy
    Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Can not capture with CS6 and blackmagic multibridge pro on HP Z820

    This is the setup:
    Z820 and Windows 7 pro
    Multibridge Pro and driver 9.7.7
    CS6.0.5
    In premiere I can not capture via the Multibridge. The app crash when entering capture mode. I can not change setting in my capture device.
    On the same PC I CAN capture with Media Composer v7 and BM Media Express.
    I've tried several version of the BM driver, no changes.
    The BM PCIe card is in slot 1 and the PC bios I have update to v3.50.
    Anyone having the same experience?
    Regards
    Danny

    Thanks for the reply. I know YouTube is not the way to check quality but it shows the stutter in playback. The quality wasn't the issue and it is filmed with my phone. The video shows what it needs to show.
    Disk setup is a ddp server (check http://www.dynamicdrivepool.com/ for info) connected with 2 network cables for optimal speed.
    Video cars is a NVIDIA Quadro K4000.
    Premiere Pro CC is up to date with the latest version.
    Export settings? I think you mean sequence settings:
    For the record: I'm not trying to play a sequence with multiple layers of video of different codecs and loaded with effects. It's just a video chopped to pieces and an adjustment layer with some simple effects. The way Adobe is advertising the performance of Premiere Pro, one would think that couldn't be a problem for any Z820. Or that's what I was thinking. Hope you or anyone can help.

  • ODI can not capture RRN (rowid)  in DB2/iSeries

    HI, all . I found that we can not config ODI to get the RRN (rowid) when CDC by reading journal . Any idea ?

    Hi, Thanks for your reply . it's great help .Please help me with these concerns :
    1. If ODI can capture missed transaction journal ,they must know the last journal 's information of a table .where these information stored ? In ODI Reposistory ?
    2.For CDC , if the source database is restored by the backup set of yesterday .Can ODI re-synchronized these change to the target datase or we have re run Load data ?
    4.For journalling in DB2 , If the changes are created by a mirror tool from another DB2 database , does these changes are recorded in native journal ?
    3.We have a target table is partitioned by date time ranged , the data in the target table is OFFLINE if the data is <sysdate -90 .
    The source table in DB2 is not partitioned , data is fully ONLINE , if there are some DML happend in the data which older than sysdate-90 in the source table , how can these change reflect to the target table ?
    4.Can CDC installed in MySQL , we have several MySQL Database
    5. We would like to use native journal , not trigger in CDC for source database in DB2 . We found that there are some limitation of native journal , such as the number of primary key columns must be not exceed 16 .
    For a given physical file( a table) in DB2 , it has the number of primary key 's column are 18 ( dued to the designed is created in 2000) , we found some error when declare primary key in source table in ODI Designer .
    How can we overcome this limitation ?
    6.Can ODI capture TRUNCATE command in DB2 source database ?

  • Help, I can not capture Audio Pinnacle to a flash media player encoder 2.5

    Help Please ...... As you can do to capture in Adobe Flash
    Media Encoder 2.5 audio moviebox A Pinnacle Studio Plus, since only
    TE Tom THE video, but does not capture the audio, and therefore I
    have a delay in the video against Audi. Do I configure Encoder
    2.5.

    Here is the fix:
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=29191

  • Unable to initialize video deck, (can not capture from camera)

    Hello All,
    I am using a quad core G5 and am trying to capture some footage into Final Cut Pro version 5.0. I have two Panasonic DVX 100B mini DV cameras. I normally capture with a JVC BR-DV3000 mini DV deck but it is currently not working. So I'm trying to capture using my camera.
    I hooked my camera up to my computer via firewire and started final cut, When I click File > Log and capture a little window pops up that reads:
    " Unable to initialize video deck. You may still log offline clips or use Capture Now"
    I'm not sure why this box is appearing. When I click the capture now button, the Capture window pops up and then I press play on the video camera and the footage plays on the camera but the capture window remains black or empty. I have tried both cameras and two different firewire cables with the same results. I have also tried to restart the computer.
    Can anyone shine some light on this situation?
    Thank you so much for your help.
    Mike Wardynski

    Are there any other firewire devices connected to your Mac?
    Did you go into your easy setup and reselect the DV setting for the standard you are using?
    Also sometimes, shutting down and restarting your Mac, after making these changes some times allows the new device to be recognized.
    One other thing, the DV camera may have a menu setting that needs to be set for communication via firewire possibly?

  • Can not capture. Anymore.

    Ok so I have a Sony HC52 and I'm using an ilink firewire cable to capture my footage. I have been able to capture for months and then the other day it stopped working. When I connect the camera with the ilink cable and try to capture, FCP does not recognize the camera. I tried capturing with QuickTime Pro also and the camera is still not recognized. As far as I know there are no drivers needed for the ilink cable. Does anyone know what’s going on? Or has anyone else had this problem? ANY help would be appreciated. Thanks.

    have you tested another Firewire DV cable to see if the cable is bad? Have you tested that Firewire port on the computer with another hard drive to make sure it's working? You can also go into System Profiler and check to see if the computer recognizes that a device is plugged into that port.
    BTW, how is Seattle looking right now. I love it there. Lived just outside for a year and it is my favorite city in the US.
    Message was edited by: RedTruck

  • Can not Capture on Quad

    Greetings all. I have a Canon GL2. I am having trouble capturing with it on my Quad. After searching the forum I see that for some reason people are having trouble capturing with Canon products. What's weird is that I can capture on my Powerbook which has the same exact OS and software but not on the Quad. Is there a reason for this? FCP does not recognize the camera in Capture 'mode' but will not start up (when the camera is plugged in via firewire) until the camera is disconnected. What's going on?
    Further, imovie doesn't recognize the camera either.
    Would a capture card make capturing more stable? This is very frustrating.

    Time for the Harpoon solution.
    shut down the computer
    turn of any external drives
    turn off the camera
    unplug the computer from the power
    unplug the firewire devices from the computer (remove cables from ports)
    get up from computer
    walk to refrigerator
    grab your favorite beverage
    enjoy beverage
    if 5 minutes are not up - enjoy another beverage
    walk back to edit area
    plug in firewire devices & computer power
    start camera
    start computer
    launch FCP
    attempt capture.
    Does it work now?
    If yes, enjoy life.
    If no, does it capture in iMovie
    If yes, you probably need to reinstall quicktime - if running 7.0.4 try downgrading to 7.0.1
    If no, you have other issues. Try removing any external firewire drives, swapping cables or cameras.
    Good luck.
    x

  • Can not capture in 16x9

    New to FCE (no problems with this in iMovie) but when I capture the video (shoot in HD 16x9) it shows during capturing in 4x3. I used Easy Setup Format PAL and DV-PAL-FireWire Basic. It should be so easy it said...?
    Any useful tips?
    Camera Panasonic NV-GS80 (DV)
    //Torsten

    Hi(Bonjour)!
    This model use mini-DV. So you've shoot in anamorphic (16:9 or wide screen) format. Not HD.
    You should use DV PAL anamorphic setting.
    Does the anamorphic checkmark property is turned on for clip in browser (use the +item properties+ command with Control click on clip itself in browser)
    Michel Boissonneault
    Message was edited by: Michel Boissonneault

  • Can not capture under Win7

    If you find that capturing is no longer possible under Win7, you may take this step to remedy the situation.
    Try changing your firewire driver. There's 3 drivers bundled in windows 7, change the driver to the one that has (Legacy) at the end of the name.

    Thanks Harm,
    Was very helpfull.

  • NO FIREWIRE! MacBook can not capture video for editing...Help!

    I bought a New Unibody Macbook last week. Then I realized that my New Video Camera (Canon Vixia HV30) is not compatible with the MacBook as it has no Firewire. So I called apple to discuss returning it for a Macbook Pro. But upon examining the specs for the MacbookPro I discovered that it only has Firewire 800 which is not cross compatible with Firewire 400. So that computer will ot help me either. Apparently the manufactures of video cameras are way behind Apple in its adoption of firewire 800. (note USB2.0 is not designed for video, it is a burst based protocol and not nearly as fast for continuous data streams, like digitizing video)
    Does anyone know of...
    1) A Video Camera that uses Firewire 800
    2) An adapter from 400 to 800?
    Any help would be very appreciated.

    I have been pretty ticked off about Apple's direction myself as I own an audio and video business which relies heavily on FW400 for my cameras and sound cards. I am fortunate to have the older 17" MacBook Pro with both Firewire's built in, but I was thinking to myself, what would I do if I had to purchase now. This is what I would do:
    I would get a MacBook Pro and purchase at $32.00 Fire Wire ExpressCard/34. Gives you 2-Firewire 400's. Heck for $30.00 you get two ports. Not bad at all!

  • Vshost32.exe stop error and can not capture this error, how to debug

    問題簽章:
      問題事件名稱: BEX
      應用程式名稱: hello.exe
      應用程式版本: 1.0.0.0
      應用程式時間戳記: 52db5c9a
      錯誤模組名稱: maple.dll_unloaded
      錯誤模組版本: 0.0.0.0
      錯誤模組時間戳記: 4de6c98e
      例外狀況位移: 069beb71
      例外狀況代碼: c0000005
      例外資料: 00000008
      作業系統版本: 6.1.7601.2.1.0.256.48
      地區設定識別碼: 3076
      其他資訊 1: 0a9e
      其他資訊 2: 0a9e372d3b4ad19135b953a78882e789
      其他資訊 3: 0a9e
      其他資訊 4: 0a9e372d3b4ad19135b953a78882e789

    Below is the translation of the error.  It looks like you made a simple application called Hello that called a dll named Maple.  Maple is probably a form since the error is being created in an unload method. Is the error occuring when you close
    the form or is the error occuring while the form is executing?
    Was the dll added to your project as a reference or are you calling the dll as a library call using Marshal?  If you added the dll as a reference you should be able to debug the code like any other code provided you have the source project.  You
    should of added the dll to your project by browsing to the project where it was built taking the dll from the debug folder.  Doing this allows VS studio to get the source code.
    If the code wasn't added by reference then you need to create a log file inside the Maple.dll to output debug messages to a file or add message boxes that gives information to help solve the issue.  You also may want to add additional exception handler
    inside Maple.dll.
    Problem signature:
    Problem event name: BEX
    Application name: Hello.exe
    Application version: 1.0.0.0
    Application timestamp: 52db5c9a
    Faulting module name: Maple.dll_unloaded
    Faulting module version: 0.0.0.0
    Fault module timestamp: 4de6c98e
    Exception offset: 069beb71
    Exception code: c0000005
    Exception data: 00000008
    OS version: 6.1.7601.2.1.0.256.48
    Locale identifier: 3,076
    Additional information 1: 0a9e
    Additional information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789
    jdweng

  • Excise Invoice can not be capture for RG1 in STO

    Hi All,
    I created a Purchase order for STO with the help of STO I created Replenishment delivery then JEX Invoice then Excise Invoice. At the time of MIGO I put the Excise invoice no. for capturing the excise duty. now when i am saving the MIGO system generating an error " Excise Invoice can not capture the RG1"
    Please throw your valuable suggestion.
    Regards
    Shambhu Sarkar

    Hi ,
    I am sure u r doing MIRO w.r.t PO after u have done MIGO of that document...
    Check that how many line items u have in MIGO and wether it is coming it MIRO or not...
    I would also suggest pl look into the MAP and Standard price in accounting view of material.
    Reply.
    Dipak

  • FCE not capturing footage

    I am using FCE 3.5.1 on a G5 Dual Processor using OX 10.4.10. I can not capture video to FCE from my two Sony DV cameras. FX1 and TRV 22. This just started after years of no problems. I have pulled preferences and reinstalled FCE several times. But the problem continues.
    I can operate the camera, but it acts as though there is no time code on the tape. The time code on the tape is fine as I have captured this footage on other systems.

    G'Day Mate
    Thanks for the reply. I have tried the Quicktime Receipts removal, but did not solve the problem. Only had one Quicktime pkg listed. It did have numbers. While I was there I pulled the FCE HS pkgs as well with numbers.
    FCE HD does recogizine the cameras and will control it from Capture, but does not capture footage correctly. With clips it pays no attention to cues in and out. In "now" it will freeze the picture while continuing to record the sound.

  • How can I capture mouse click events on BSP or Web Dynpro ABAP Screen

    hi Guys,
    Currently we have a user inactivity problem,
    the requirement is: if user is clicking on BSP/Web Dynpro ABAP screen, he/she is considered active. so we need an mechanism to capture the mouse click event.
    Using Firebug, we found that this js is in the iframe which contains BSP/web dynpro scrren: /sap/public/bc/ur/nw5/js/languages/urMessageBundle_en.js
    we want to find this js file & put in some javascript code to track user's mouse click, but i cannot find it on server.
    while in ie if we type http://host:port/sap/public/bc/ur/nw5/js/languages/urMessageBundle_en.js
    this file can be downloaded, means this file is there.
    Any one can help on this issue? find the js file or another way to capture the mouse click event.
    Thanks a lot with points!

    Hi  Feng Guo,
                        We can not capture mouse click events on Web Dynpro ABAP Screen . I am not sure about BSP. But as for as I know the portal keep active the iViews until unless mouse clicks happens.
    But for your problem I think you can get solution by setting iView Expiration to some more time period.
    Regards,
    Siva

Maybe you are looking for