Can not change default smart mailboxes

Hi,
Ever since I upgraded to 10.9 my Mail.app does not allow me to make changes to the smart folders.
There is a default one called "today" and it can be deleted, renamed or edited but in a few minutes it reappears in its default state. Same for any new smart mailbox, I can create it but in a few minutes it is again not there.
How can I fix this?
Thanks
Asu

Hi Don,
Thank you so much for your help and information. I have been trying to figure out how to change the default browser for about two weeks now. All the help files I've seen talked about an internet control panel I did not seem to have.
I followed your advice and that fixed it. I now get the right control panel when I pick the internet control panel from the apple menu. And yes, I can now choose my default browser.
After the fix when I first checked HELP to see if it could now open the internet control panel, it gave me an error message and told me to restart the computer. However, after rebooting and rebuilding the desktop it opens the control panel for me.
It also fixed at least one other problem I had with another program. Ever since I upgraded my IM program, it's INTERNET SETTINGS link under the edit menu never worked. It would not do anything when I chose it. It now works and opens the internet control panel. That is nice.
One other question.
After using Tome Viewer, I seen a number of internet related files. Some I already have like; Internet Prefs, Internet set and Internet Config Extension. However there is one called "Internet.cnl". I don't seem to have that file anywhere installed on my computer. Should this file be installed somewhere too?
Thanks again for your help. It was very much appreciated.
Joe

Similar Messages

10.4.11 Server - Can not change default permission behaviour

Hello,
I have a 10.4.11 Server running with a raid attached.
I have the problem, that I can not change the default permission behaviour. POSIX is ticked but I want to use "Inherit permissions from parent". As the standard "group just read" POSIX behaviour is not what I want.
The WGM does not give me the possibility to change the default permission. The Radiobuttons are grey and can not be changed.
The Raid Volumes are formatted in HFS+ Journaled.
Would be more than happy to get a hint.
Thanks
Edit: The SMB permission btw. can be changed.
Message was edited by: shifty.aimless

blindness...
WGM - Sharing - ALL Share Points - mark the volume your share point is on - General - untick "Enable Access Control Lists on this volume".

ThinkPad USB 3.0 Secure Hard Drive - I can not change Default admin password

I followed all the instructions from the manual guide but the password cannot being changed.
enter in admin mode, then hold lock plus 9 until led flash in blue
input a new password (of course between 8 and 16 digits lenght)
then the led flash in green three times, but then the led flash in blue and then flash in red and then in blue again as the password had wrong length.
The manual does not provide furthe action to troubleshoot.
is the device wiht defect?
Any hint would be appreciated.
Thanks,
Marceloap

Hello Denmark calling.
Solution for you’re:
ThinkPad USB 3.0 Secure Hard Drive problem.
In order to set the Admin pass, you will have to do the following
1. Press 0+OK for 5 sec, enter "12345678" and OK       = BLUE LED   (Admin mode)
2. Press OK+9                                                                        = BLUE LED flashes
3. Enter admin code with correct fashion, and then OK = BLUE LED flashes   (and now most important)
4. Re-enter admin code, and OK                                        = BLUE LED.
This must be done before attempting to change user password. (Obvious reasons)
For User code change.
This can be changed by accessing the admin mode first = BLUE LED
And then
1+OK                                                                                            = BLUE LED flashes
Re-enter user code and OK                                                    = BLUE LED
For User code and Admin code there is not mentioned any reference online reference supplied by Lenovo, which tells the new proud owner the correct way to alter standard codes.
But let it be said that in my humble opinion this is a (almost) great product (SSD would make the difference for me personally)
Hopes it helps
TaR

Can not change default

Hello
I downloaded the new iWorks. I use Pages and Numbers. When I save a new document, the default would place the new documents in "iCloud." I want to change the default to save the new documents "on my mac." Pages' and Numbers' preferences do not allow the default to be changed. Any idea of how to change the default? Or is this something that will be fixed with the next patch?
My gut tells me Apple is getting sloppy, putting new software versions out before the software is ready or truly functional / compatable. That or Apple is trying to force a change in my personal computer practices. Either way, I am ****** off.
On that line of thought, why does Pages for the iPad change all my document fonts and screw up the document that I open from the iCloud. If iPad Pages cannot do what desktop Pages does, it should not be called Pages. What a waste of $10.
I'm just ******** now:
Why can't I create folders in the iCloud from my desk top computer?
Why do I have to recreate all my email folders that are on my mac, in the iCloud email. That is 75+ folders. Isn't there some way to have those folders and all their contents migrate?
Below I am suppose to enter product, but Pages is not listed with the other software. Nor is Numbers or iWork.
Kenneth

Hi Don,
Thank you so much for your help and information. I have been trying to figure out how to change the default browser for about two weeks now. All the help files I've seen talked about an internet control panel I did not seem to have.
I followed your advice and that fixed it. I now get the right control panel when I pick the internet control panel from the apple menu. And yes, I can now choose my default browser.
After the fix when I first checked HELP to see if it could now open the internet control panel, it gave me an error message and told me to restart the computer. However, after rebooting and rebuilding the desktop it opens the control panel for me.
It also fixed at least one other problem I had with another program. Ever since I upgraded my IM program, it's INTERNET SETTINGS link under the edit menu never worked. It would not do anything when I chose it. It now works and opens the internet control panel. That is nice.
One other question.
After using Tome Viewer, I seen a number of internet related files. Some I already have like; Internet Prefs, Internet set and Internet Config Extension. However there is one called "Internet.cnl". I don't seem to have that file anywhere installed on my computer. Should this file be installed somewhere too?
Thanks again for your help. It was very much appreciated.
Joe

ASA 5520 - Can not change default route.

Hi
My asa is sitting behind a router the next hop from the ASA to the router is 10.0.0.5 I have tried to change the default route to route DMZ 0 0 10.0.0.5 to no availability right now the default route is (S*   0.0.0.0 0.0.0.0 [1/0] via 172.16.8.20, Outside) but even if I were to do a "no route Outside 0 0 172.16.8.20" the default route does not disappear when I do a "sh route" command. ant help would be greatly appreciated.

I apologize for not being clear hopefully this helps. Basically the default route should be: route DMZ 0.0.0.0 0.0.0.0 10.10.10.5, I had to add a metric of 2 because otherwise it would conflict with the Gateway of last resort, the interesting part is if I try to remove the current gateway of last resort then the error I get is %No matching route to delete and I try to add the new route I get ERROR: Cannot add route entry, conflict with existing routes.
**"show ip address" output---
Interface                Name                   IP address      Subnet mask     Method
GigabitEthernet0/0       Outside               172.22.8.166    255.255.252.0   CONFIG
GigabitEthernet0/3       DMZ                   10.10.10.16     255.255.255.0   CONFIG
Management0/0            management      192.168.100.1   255.255.255.0   CONFIG
GigabitEthernet1/0       Inside                 172.16.0.2      255.255.252.0   CONFIG
GigabitEthernet1/1       VPN                    X.X.X.X          255.255.255.240 CONFIG
Current IP Addresses:
Interface                Name                   IP address      Subnet mask     Method
GigabitEthernet0/0       Outside               172.22.8.166    255.255.252.0   CONFIG
GigabitEthernet0/3       DMZ                   10.10.10.16     255.255.255.0   CONFIG
Management0/0            management      192.168.100.1   255.255.255.0   CONFIG
GigabitEthernet1/0       Inside                 172.16.0.2      255.255.252.0   CONFIG
GigabitEthernet1/1       VPN                    X.X.X.X          255.255.255.240 CONFIG
**"show running-config" output---
!The DMZ route should be the gateway of last resort
route DMZ 0.0.0.0 0.0.0.0 10.10.10.5 2
route Outside 10.0.1.0 255.255.255.252 172.22.8.20 1
route Outside 10.0.2.0 255.255.255.252 172.22.8.20 1
route Outside 10.0.4.0 255.255.255.252 172.22.8.20 1
route Outside 10.0.5.0 255.255.255.240 172.22.8.20 1
route Outside 10.0.6.0 255.255.255.252 172.22.8.20 1
route Outside 10.0.25.0 255.255.255.0 172.22.8.20 1
route Outside 10.0.52.0 255.255.255.0 172.22.8.20 1
route Inside 172.16.0.0 255.255.252.0 172.16.0.3 1
route Outside 172.16.6.0 255.255.255.0 172.16.6.1 1
route Outside 172.22.0.0 255.255.0.0 172.22.8.20 10
route Outside 192.168.0.0 255.255.255.0 172.22.8.20 255
route DMZ 192.168.200.0 255.255.255.0 156.108.124.66 1
**"show route" output ---
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route
Gateway of last resort is 172.22.8.20 to network 0.0.0.0
S    172.16.6.0 255.255.255.0 [1/0] via 172.16.6.1, Outside
                              [1/0] via 172.22.8.20, Outside
C    172.16.0.0 255.255.252.0 is directly connected, Inside
C    172.22.8.0 255.255.252.0 is directly connected, Outside
S    172.22.0.0 255.255.0.0 [10/0] via 172.22.8.20, Outside
D    192.168.4.8 255.255.255.252 [90/2178816] via 172.16.0.3, 66:37:21, Inside
D    192.168.4.9 255.255.255.255 [90/2178816] via 172.16.0.3, 66:37:21, Inside
S    10.0.2.0 255.255.255.252 [1/0] via 172.22.8.20, Outside
D    10.0.0.0 255.255.255.0 [90/3072] via 172.16.0.3, 66:37:21, Inside
C    10.10.10.0 255.255.255.0 is directly connected, DMZ
S    10.0.1.0 255.255.255.252 [1/0] via 172.22.8.20, Outside
S    10.0.6.0 255.255.255.252 [1/0] via 172.22.8.20, Outside
S    10.0.4.0 255.255.255.252 [1/0] via 172.22.8.20, Outside
S    10.0.5.0 255.255.255.240 [1/0] via 172.22.8.20, Outside
S    10.0.25.0 255.255.255.0 [1/0] via 172.22.8.20, Outside
S    10.0.52.0 255.255.255.0 [1/0] via 172.22.8.20, Outside
S    192.168.0.0 255.255.255.0
           [255/0] via 172.22.8.20, Outside
D    192.168.100.0 255.255.255.0 [90/3072] via 172.16.0.3, 66:37:21, Inside
! I have tried to remove the route below with the command "no route Outside 0 0 172.22.8.20" but always get the error %No matching route to delete
S*   0.0.0.0 0.0.0.0 [1/0] via 172.22.8.20, Outside

Can not change the default Apple ID for AppStore

I can not change the Apple ID that defaults as my AppStore login or reset the password for the default ID. The reset does not recognise my birth date security data or generate an email to any of my live email accounts.

Yes, easy to do.
Go to Settings>General>Erase All Content and Settings, then set up your iPad as a new one. You'll have to put in your ID and password to force the erase.

Smart mailbox for mails which are not in another smart mailbox

Hello!
I tried to create a smart mailbox for all the mails which doesn't appear in any other smart mailbox.
I know that I can tell my smart mailbox not to look for mails who are in the inbox or the other default-boxes of the mail program.
But how can I choose a smart Mailbox instead???

Thanks, John, but the original idea isn't mine. Someone else realized that some time ago:
Re: Smart Mail Box that contains messages not in any other smart mail box

Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.

Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
Adapter: Ralink RT3070 Chipset wifi adapter
Tested: os Windows 8.1 Professional
Hot Spot: 802.11b
The first problem windows 7-8.1 got IP adress and connect he public HotSpot but cannot load login page or any other page. It does not work with it.
The second problem Wifi canrd/configure/Advandes (No network adress change function).Tested with the default windows driver and the ralink rt 3070 driver the same problem.On windows XP the same function the same driver works perfectly.
multiple users to have expressed interest in the problem But Microsoft not corrected the problem window7-8.1 10?
lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7
blog.technitium.com/2011/05/tmac-issue-with-wireless-network.html
superuser.com/questions/519189/how-to-change-the-mac-address-in-win-8-to-spoof-a-roku-player-through-a-wifi-spl
social.technet.microsoft.com/Forums/windows/en-US/59e07df3-471c-499e-ad5f-e7cb507595df/cannot-change-mac-address-in-windows-7-driver-has-option-doesnt-work-neither-does-regedit-ms?forum=w7itpronetworking
networksteve.com/windows/topic.php/CANNOT_CHANGE_WIRELESS_%28SPOOF%29_MAC_ADDRESS_ON_WINDOWS_7/?TopicId=16810&Posts=1
On windows XP or linux have a MAC adress Change function allow 00 mac adress and another normal mac adress range.On windows 8.1 all Mac changer program dont work.This 2,6,A,E on second adress are not vaild Mac adress. You simply can not use normal MAC
addresses on windows 8.1.When i connect the usb the Pc windows 8.1 recognizes the adapter but the default driver and the downloaded ralink driver the same problem.On windows xp the current driver works perfectly have (Local Mac Network Adress) funktion
and works with the 802.11b hot spot.I got the internet my PC and laptop too public HotSpots and another wifi HotSpots if wont work correctly i can not use neither the windows 7,8,8.1 or 10. Many users have expressed interest in the problem more forums.
The 3. problem im tested in virtualbox the windows 7 and 8.1 on 8.1 (on the blue wifi platform) not show correctly the signal strengh. On windows 7 show this correctly.The windows 7-8.1 Configure/advanced the advanced options on Ralink 3070 the default (windows
driver) somehow downgraded function is less than for Xp. Configure/advanced the advanced options (needs to be upgraded in the future) because it does not advance but rather regressed.
Today it is very common these wi-fi technology increasingly used (hotels,Public Hots Spots,Internet coffe,) growing free bublic wifi projects. The wifi funktions on windows need debugging and modernize.The quality of Wi-Fi is now the operating system
is now a thing order which is not good then the operating system is unusable.

Hi,
For changing the MAC address for Windows 7 is designed with some limitation, we cannot get over it. Thanks for your understanding.
Under Windows 7, the possible range of spoofed addresses for wireless adapters that can be set is limited. To be used by Windows 7, a spoofed MAC address should have 0 as a least significant bit (unicast) and 1 as a second least significant
bit (locally administered) in the second nibble. Thus possible values for the second nibble are limited to 2, 6, A and E.
In other words
MAC address: “XY-XX-XX-XX-XX-XX” “X” can be anything hexadecimal. The hexadecimal “Y”, written in binary format, is Y: “kmnp”, where “p” is the least significant bit;
p=0 --> unicast;
p=1 --> multicast;
n=0 --> globally assigned MAC;
n=1 --> locally administered;
So, actually MAC can be changed to any combination in which p=0 and n=1;
“Y” can be 2, 6, A or E.
So the possible MAC addresses in Windows 7 for wireless adapters:
X2-XX-XX-XX-XX-XX
X6-XX-XX-XX-XX-XX
XA-XX-XX-XX-XX-XX
XE-XX-XX-XX-XX-XX
For the wifi hotspot issue, please check this blog to see if it can be helpful.
Windows 7 Connectivity Problems in Public Hotspots
http://blogs.technet.com/b/patrickr/archive/2010/07/28/windows-7-connectivity-problems-in-public-hotspots.aspx
Kate Li
TechNet Community Support

Adobe Reader 8.1.2 : can not change Printer Command

Hello all,
I encounter the following problem with Acrobat Reader 8.1.2, installed on Debian GNU/Linux, trying to print :
When I choose a printer (within the list given by a CUPS server) I can not change the Printer Command which prevents me from printing : the default printing options (-o InputSlot -o PageSize ...) are not compliant with my LPRng printing system.
Note that I was able to do it with 7.0.5 and 8.1.1 versions.
Would you please help me to resolve this problem ?
Regards,
Jean-Noel BOUVIER

Hello Jean-Noel,
The print command text box (in the Printer properties dialog) has been made read-only to avoid confusion and discrepancies with the drop-downs available to modify the options.
If you want a particular print command to be used you could try out the Custom printing option. The command typed there is remembered between different sessions of the Reader.
Hope this helps.
Sincerely,
Neha

I can not use ipad smart cover after upgrade ios 7.

I can not use ipad smart cover after upgrade ios 7. It makes reboot again again...if i cover up ipad with smart cover. i never had this problem before. please fix this bug!!!!

Change your iPod DNS to 8.8.8.8
That should work. Cheers

HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car pato caa パトカア　they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

I can not change the time in activity Appointment in WebUi

Dear Experts!
I can not change the time in activity Appointment when creating: calendar -> month -> click on the day
snapshot of problem:
http://imglink.ru/show-image.php?id=e7a096115a6371ffab46c701f8e470ba
When I create a Appointment (Activities -> Create Appointment) of all good:
http://imglink.ru/show-image.php?id=ef65a38bdf7fc77eb9a71ec5c3ad5603
Help me this problem?

You need to add that attribute using the config tool for your view configuration. Select the attribute All Day from the context node BTDATE in the available fields to your display field and then save it. It should now be visible in your UI and now you can select or uncheck it to make the time field enable. Check the below image
http://imglink.ru/show-image.php?id=a9a660778c0fee2b3fd7409d620eddc5
Regards,
Shobhit

Can not change user filed in CR Viewer

I am using Crystal Reports 2011 and i created a user field. i opened the report in CR viewer 2008 and the change filed is greyed out and the user can not change the field. I have tried saving the report with out a date saved in the report to see if viewer will prompt for a date but the report will not let me take it out now that it is set. i have checked options on the filed and it is set to editable. Is there something i am over looking? How can i get the user fields to work in crystal reports viewer?

thanks for helping.
viewer 2008 is the only thing i can find right now, i thought that might be the problem but i can not find a 2011 to download so i assumed they dont have it available yet.
the report does work in CR2011 but we can not get CR for everyone, and they are not going to use it, they only need viewer if it will work.
the parameter is a date field based off a database field.
thanks.
angel

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

Can't use Find My Friends on iPhone due to Apple ID not being verified. Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!

Can't use Find My Friends on iPhone due to Apple ID not being verified.
Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!
So my options are:
Create a new Apple ID, use that and lose all the apps I've purhcased with it (a fairly substantial amount)
Somehow Migrate these purchases over to a new Apple ID
Apple let me change the primary ID for the account
Anyone else ran into this before?
I've tried accessing the mail through a mail application using the correct server information, and trying both the old 6 character password and the one I had to change it too after they updated the security guidelines - neither work.
Help would be greatly appreciated as I can see more services down the line not working without the address being verified!

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You should not need to verify the old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Can not change default smart mailboxes

Similar Messages

Maybe you are looking for