Can not compose an aggregation EPCIS event for stanalone EPC(s)

Hi ,
We are facing problem while posting packing event in SAP OER .
Error as below :-
"Can not compose an aggregation EPCIS event for stanalone EPC(s)".
We are performing aggregation event while packing the secondary product to tertiary product.
Thanks
Surekha

Hi Surekha Dhumal,
Usually EPC attributes are case sensitive. Please check if all the EPC attributes match the configuration.For example "ContainerID" attribute, SAP AII can not recognise "containerID"/"ContainerId"/...etc.
If you can share the EPCIS message content it would be easy to identify the issue.
Regards,
BRV.

Similar Messages

Why can not catch the standard BACK event in ALV's USER_COMMAND event,

Hi expert, why i can not catch the standard BACK event in ALV's USER_COMMAND event,
Code:
DATA G_CON_UC_FORM   TYPE SLIS_FORMNAME VALUE 'F_USER_COMMAND',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM      = SY-REPID
      I_CALLBACK_TOP_OF_PAGE = G_CON_FORM
      I_CALLBACK_USER_COMMAND = G_CON_UC_FORM
      IT_FIELDCAT             = G_TAB_FIELDCAT
      IT_SORT                 = G_TAB_SORT_INF
      I_SAVE                  = G_CON_U
*<<<Liang
    IT_EVENTS               = G_TAB_ALV_EVENTS
*<<<Liang
    TABLES
      T_OUTTAB                = G_TAB_OUTPUT_DATA
    EXCEPTIONS
      PROGRAM_ERROR           = 1
      OTHERS                  = 2.
*&      Form F_USER_COMMAND
      ALV USER COMMAND processing
FORM F_USER_COMMAND .
IF SY-UCOMM = '&FO3'.
    LEAVE TO SCREEN 0.
ENDIF.
ENDFORM.                    " F_USER_COMMAND
When I set breakpoint on this subrouting ,and try to click stardard BACK or CANCEL button, the callback form do not run, but if double click one of line of alv report, the callback form works well,
so why??

hi
good
check this report and change your code accordingly.
THESE LINES ARE FOR THE MAIN PROGRAM ***
SAP V40B ***
REPORT Z_PICK_LIST .
TABLES: RESB.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS: S_WERKS FOR RESB-WERKS," Plant
                S_AUFNR FOR RESB-AUFNR," Order number
                S_BDTER FOR RESB-BDTER." Req. date
SELECTION-SCREEN END OF BLOCK BL1.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT DEFAULT '/STANDARD'.
DATA: BEGIN OF OUT OCCURS 10,
        AUFNR LIKE RESB-AUFNR,         " Order number
        MATNR LIKE RESB-MATNR,         " Material
        BDMNG LIKE RESB-BDMNG,         " Requirements in UM
        MEINS LIKE RESB-MEINS,         " Unit of Measure (UM)
        ERFMG LIKE RESB-ERFMG,         " Requirements in UE
        ERFME LIKE RESB-ERFME,         " Unit of Entry (UE)
        MAKTX LIKE MAKT-MAKTX,         " Mat. description
      END OF OUT.
INCLUDE Z_ALV_VARIABLES.
INITIALIZATION.
REPNAME = SY-REPID.
PERFORM INITIALIZE_FIELDCAT USING FIELDTAB[].
PERFORM BUILD_EVENTTAB USING EVENTS[].
PERFORM BUILD_COMMENT USING HEADING[].
PERFORM INITIALIZE_VARIANT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
AT SELECTION-SCREEN.
PERFORM PAI_OF_SELECTION_SCREEN.
START-OF-SELECTION.
PERFORM GET_ORDERS.
PERFORM GET_MATERIAL_DESCRIPTION.
END-OF-SELECTION.
PERFORM BUILD_LAYOUT USING LAYOUT.
PERFORM BUILD_PRINT USING PRINTS.
PERFORM WRITE_USING_ALV.
      FORM INITIALIZE_FIELDCAT                               *
--> P_TAB                                                         *
FORM INITIALIZE_FIELDCAT USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT.
ENDFORM.                               " INITIALIZE_FIELDCAT
*&      Form GET_ORDERS
      text
FORM GET_ORDERS.
SELECT AUFNR MATNR BDMNG MEINS ERFMG ERFME
         FROM RESB
         APPENDING TABLE OUT
         WHERE XLOEK EQ SPACE          " deletion indicator
         AND   XWAOK EQ 'X'            " goods movement indicator
         AND   WERKS IN S_WERKS        " plant
         AND   BDTER IN S_BDTER        " req. date
         AND   AUFNR IN S_AUFNR.       " pr. order
ENDFORM.                               " GET_ORDERS
*&      Form GET_MATERIAL_DESCRIPTION
      text
FORM GET_MATERIAL_DESCRIPTION.
SORT OUT BY MATNR.
LOOP AT OUT.
    SELECT SINGLE MAKTX
           INTO OUT-MAKTX
           FROM MAKT
           WHERE MATNR EQ OUT-MATNR
           AND   SPRAS EQ 'EN'.
    MODIFY OUT.
ENDLOOP.
SORT OUT BY AUFNR MATNR.
ENDFORM.                               " GET_MATERIAL_DESCRIPTION
      FORM TOP_OF_PAGE                                              *
FORM TOP_OF_PAGE.
DATA: L_POS TYPE P.
first line
WRITE:/ TEXT-001.                    " Plant:
IF S_WERKS-HIGH NE SPACE.
    WRITE: S_WERKS-LOW, TEXT-TO1, S_WERKS-HIGH.
ELSEIF S_WERKS-LOW NE SPACE.
    LOOP AT S_WERKS.
      WRITE: S_WERKS-LOW.
    ENDLOOP.
ELSEIF S_WERKS-LOW EQ SPACE.
    WRITE: TEXT-ALL.
ENDIF.
L_POS = ( SY-LINSZ DIV 2 ) - ( STRLEN( TEXT-TIT ) DIV 2 ).
POSITION L_POS. WRITE: TEXT-TIT.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-011, SY-UNAME RIGHT-JUSTIFIED. " User:
second line
WRITE:/ TEXT-002.                    " Order:
IF S_AUFNR-HIGH NE SPACE.
    WRITE: S_AUFNR-LOW, TEXT-TO1, S_AUFNR-HIGH.
ELSEIF S_AUFNR-LOW NE SPACE.
    LOOP AT S_AUFNR.
      WRITE: S_AUFNR-LOW.
    ENDLOOP.
ELSEIF S_AUFNR-LOW EQ SPACE.
    WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-012,SY-DATUM.      " Date:
third line
WRITE:/ TEXT-003.                    " Req. Date:
IF S_BDTER-HIGH(1) NE '0'.
    WRITE: S_BDTER-LOW, TEXT-TO1, S_BDTER-HIGH.
ELSEIF S_BDTER-LOW(1) NE '0'.
    LOOP AT S_BDTER.
      WRITE: S_BDTER-LOW.
    ENDLOOP.
ELSEIF S_BDTER-LOW(1) EQ '0'.
    WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-013, SY-PAGNO.   " Page:
ENDFORM.                               " TOP_OF_PAGE
      FORM END_OF_LIST                                              *
FORM END_OF_LIST.
DATA: L_POS TYPE P.
ULINE.
WRITE:/ '|', TEXT-021.      " Delivered by:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-031.            " Received by:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
WRITE:/ '|', TEXT-012.      " Date:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-012.            " Date:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
ENDFORM.                               " END_OF_LIST
*&      Form WRITE_USING_ALV
      text
FORM WRITE_USING_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME     = REPNAME
            I_INTERNAL_TABNAME = 'OUT'
            I_INCLNAME         = REPNAME
       CHANGING
            CT_FIELDCAT        = FIELDTAB.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = REPNAME
           i_callback_pf_status_set = 'PF_STATUS_SET'
           i_callback_user_command = 'USER_COMMAND'
            I_STRUCTURE_NAME         = 'OUT'
            IS_LAYOUT                = LAYOUT
            IT_FIELDCAT              = FIELDTAB
            I_DEFAULT                = 'A'
            I_SAVE                   = G_SAVE
            IS_VARIANT               = G_VARIANT
            IT_EVENTS                = EVENTS[]
            IS_PRINT                 = PRINTS
       TABLES
            T_OUTTAB                 = OUT.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_LIST_DISPLAY'.
ENDIF.
ENDFORM.                               " WRITE_USING_ALV
THESE LINES ARE FOR THE INCLUDE ***
***INCLUDE Z_ALV_VARIABLES .
TYPE-POOLS: SLIS.
DATA: FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
      HEADING TYPE SLIS_T_LISTHEADER,
      LAYOUT   TYPE SLIS_LAYOUT_ALV,
      EVENTS   TYPE SLIS_T_EVENT,
      REPNAME LIKE SY-REPID,
      F2CODE   LIKE SY-UCOMM VALUE '&ETA',
      PRINTS   TYPE SLIS_PRINT_ALV,
      TITLE(40) TYPE C,
      G_SAVE(1) TYPE C,
      G_EXIT(1) TYPE C,
      G_VARIANT LIKE DISVARIANT,
      GX_VARIANT LIKE DISVARIANT.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
           FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
           FORMNAME_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
           FORMNAME_BEFORE_LINE TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE',
           FORMNAME_AFTER_LINE TYPE SLIS_FORMNAME VALUE 'AFTER_LINE'.
      FORM MAIN_STATEMENTS                                          *
THIS IS THE CODE THAT MUST BE INSERTED IN THE MAIN PROGRAM
FORM MAIN_STATEMENTS.
Declare the parameter P_VARI wherever you want it. If you don't
want it, hide it with NO-DISPLAY, but it must exist.
parameters: p_vari like disvariant-variant. " ALV Variant
You have to add the following line after the data and parameter
declaration:
include z_alv_variables.
Then, after the data/parameter declaration, add these lines:
*initialization.
repname = sy-repid.
perform initialize_fieldcat using fieldtab[].
perform build_eventtab using events[].
perform build_comment using heading[].
perform initialize_variant.
If you are using the variable P_VARI (ALV Variant), also add this:
*at selection-screen on value-request for p_vari.
perform f4_for_variant.
*at selection-screen.
perform pai_of_selection_screen.
After the "END-OF-SELECTION" statement, add these lines:
perform build_layout using layout.
perform build_print using prints.
perform write_using_alv.
You also have to create the following forms: (you can find samples
in this program)
INITIALIZE_FIELDCAT
USER_COMMAND     (only if you are creating a STATUS)
WRITE_USING_ALV
ENDFORM.
*&      Form INITIALIZE_FIELDCAT_SAMPLE
      THIS IS A SAMPLE, DO NOT USE THIS FORM IN YOUR PROGRAM
     -->P_FIELDTAB[] text                                           *
FORM INITIALIZE_FIELDCAT_SAMPLE USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT.                           " Always clear before use
CAT-TABNAME = 'I'.                   " Your internal table
CAT-REF_TABNAME = 'ZCUSTMAS'. " The data dictionary reference table
CAT-FIELDNAME = 'KUNNR'.       " Name of your field in the itable.
CAT-COL_POS   = 1.                   " Output position
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'NAME1'.             " Next field
CAT-COL_POS   = 2.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'STRAS'.             " and the next
CAT-COL_POS   = 3.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'LOEVM'.
CAT-SELTEXT_S = 'Del'.         " You can always override the descrip-
CAT-SELTEXT_M = 'Delivery'.          " tion (short, medium, large)
CAT-SELTEXT_L = 'Delivery Num'.
CAT-COL_POS   = 4.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'FKIMG'.
CAT-DO_SUM    = 'X'.                 " You want totals calculated.
CAT-NO_OUT    = 'X'.                 " and hidden.
APPEND CAT TO P_TAB.
ENDFORM.                               " INITIALIZE_FIELDCAT
*&      Form BUILD_EVENTTAB
      THIS IS THE SAME FOR ALL THE PROGRAMS
     -->P_EVENTS[] text                                             *
FORM BUILD_EVENTTAB USING P_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            I_LIST_TYPE = 0
       IMPORTING
            ET_EVENTS   = P_EVENTS.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_LIST
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_END_OF_LIST TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_BEFORE_LINE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_AFTER_LINE_OUTPUT
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_AFTER_LINE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
ENDFORM.                               " BUILD_EVENTTAB
*&      Form BUILD_COMMENT
NOT REALLY NEEDED, BUT I'LL LEAVE IT THERE, JUST IN CASE...
     -->P_HEADING[] text                                            *
FORM BUILD_COMMENT USING P_HEADING TYPE SLIS_T_LISTHEADER.
DATA: HLINE TYPE SLIS_LISTHEADER,
        TEXT(60) TYPE C,
        SEP(20) TYPE C.
CLEAR: HLINE, TEXT.
HLINE-TYP = 'H'.
write: text-101 to text+23.
HLINE-INFO = TEXT.
APPEND HLINE TO P_HEADING.
ENDFORM.                               " BUILD_COMMENT
*&      Form INITIALIZE_VARIANT
VERY IMPORTANT WHEN YOU USE VARIANTS!!!
FORM INITIALIZE_VARIANT.
G_SAVE = 'A'.
CLEAR G_VARIANT.
G_VARIANT-REPORT = REPNAME.
GX_VARIANT = G_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            I_SAVE     = G_SAVE
       CHANGING
            CS_VARIANT = GX_VARIANT
       EXCEPTIONS
            NOT_FOUND = 2.
IF SY-SUBRC = 0.
    P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDFORM.                               " INITIALIZE_VARIANT
*&      Form PAI_OF_SELECTION_SCREEN
ALSO FOR VARIANTS
FORM PAI_OF_SELECTION_SCREEN.
IF NOT P_VARI IS INITIAL.
    MOVE G_VARIANT TO GX_VARIANT.
    MOVE P_VARI TO GX_VARIANT-VARIANT.
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
         EXPORTING
              I_SAVE     = G_SAVE
         CHANGING
              CS_VARIANT = GX_VARIANT
         EXCEPTIONS
              WRONG_INPUT   = 1
              NOT_FOUND     = 2
              PROGRAM_ERROR = 3.
    IF SY-SUBRC EQ 0.
      G_VARIANT = GX_VARIANT.
    ELSE.
      PERFORM INITIALIZE_VARIANT.
    ENDIF.
ELSE.
    PERFORM INITIALIZE_VARIANT.
ENDIF.
ENDFORM.                               " PAI_OF_SELECTION_SCREEN
*&      Form F4_FOR_VARIANT
      text
FORM F4_FOR_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
       EXPORTING
            IS_VARIANT = G_VARIANT
            I_SAVE     = G_SAVE
       IMPORTING
            E_EXIT     = G_EXIT
            ES_VARIANT = GX_VARIANT
       EXCEPTIONS
            NOT_FOUND = 2.
IF SY-SUBRC = 2.
    MESSAGE ID SY-MSGID TYPE 'S'      NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF G_EXIT = SPACE.
      P_VARI = GX_VARIANT-VARIANT.
    ENDIF.
ENDIF.
ENDFORM.                               " F4_FOR_VARIANT
*&      Form BUILD_LAYOUT
STANDARD LAYOUT
     -->P_LAYOUT text                                               *
FORM BUILD_LAYOUT USING P_LAYOUT TYPE SLIS_LAYOUT_ALV.
P_LAYOUT-F2CODE       = F2CODE.
P_LAYOUT-ZEBRA        = 'X'.
p_layout-detail_popup = 'X'.
P_LAYOUT-TOTALS_TEXT = SPACE.
P_LAYOUT-SUBTOTALS_TEXT = SPACE.
ENDFORM.                               " BUILD_LAYOUT
      FORM BUILD_PRINT                                              *
STANDARD PRINT OPTIONS                                             *
--> P_PRINT                                                       *
FORM BUILD_PRINT USING P_PRINT TYPE SLIS_PRINT_ALV.
P_PRINT-NO_PRINT_LISTINFOS = 'X'.
P_PRINT-NO_PRINT_SELINFOS = ' '.
ENDFORM.                               " BUILD_PRINT
      FORM PF_STATUS_SET                                            *
NAME YOUR STATUS ALV. IF YOU NEED IT..                             *
FORM PF_STATUS_SET USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ALV' EXCLUDING EXTAB.
ENDFORM.                               " PF_STATUS_SET
      FORM USER_COMMAND_SAMPLE                                      *
--> UCOMM                                                         *
--> SELFIELD                                                      *
FORM USER_COMMAND_SAMPLE USING UCOMM    LIKE SY-UCOMM
                           SELFIELD TYPE SLIS_SELFIELD.
CASE UCOMM.
    WHEN 'MSXL'.                       " Export to Excel
     perform set_excel_export.
      CLEAR UCOMM.
    WHEN 'MM03'.
     set parameter id 'MAT' field selfield-value.
     call transaction 'MM03' and skip first screen.
      CLEAR UCOMM.
    WHEN 'BGR1'.
     perform fill_available.
     perform graph_available.
      CLEAR UCOMM.
    WHEN 'DOCU'.
     call function 'Z_HELP' exporting repname = repname.
ENDCASE.
ENDFORM.                               " USER_COMMAND
*&      Form WRITE_USING_ALV_SAMPLE
*THIS IS A SAMPLE AND MUST BE WRITTEN DIRECTLY IN THE MAIN PROGRAM
FORM WRITE_USING_ALV_SAMPLE.
YOU CAN MERGE WITH A DATA DICTIONARY TABLE USING THIS:
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
      exporting
           i_program_name     = repname
           i_internal_tabname = 'I'
           i_inclname         = repname
      changing
           ct_fieldcat        = fieldtab.
if sy-subrc <> 0.
   write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_FIELDCATALOG_MERGE'.
endif.
OR JUST DISPLAY IT USING THIS:
call function 'REUSE_ALV_LIST_DISPLAY'
      exporting
           i_callback_program       = repname
           i_callback_pf_status_set = 'PF_STATUS_SET'
           i_callback_user_command = 'USER_COMMAND'
           i_structure_name         = 'I'
           is_layout                = layout
           it_fieldcat              = fieldtab
           i_default                = 'A'
           i_save                   = g_save
           is_variant               = g_variant
           it_events                = events[]
           is_print                 = prints
      tables
           t_outtab                 = i.
if sy-subrc <> 0.
   write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_LIST_DISPLAY'.
endif.
ENDFORM.                               " WRITE_USING_ALV
thanks
mrutyun^

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

How can I export a list of events for one of many calendars - e.g. "sailing" to use in Excel

How can I export a list of events for one of many calendars - e.g. "sailing" to use in Excel?

See this thread here
Display number of emails by sender

I can not get into the iTunes store for the past two days. I can do a search on the music in upper right corner. However, the screen is white with "iTunes" in the middle when I do. Any suggestions? Thank you.

I can not get into the iTunes store for the past two days. I can do a search on the music in upper right corner and get a drop down list. However, the screen is then white with "iTunes" in the middle. Any suggestions? Thank you.

Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
If your computer has one of the LSPs listed you may have to reset winsock.
If not, you may want to give this article a shot -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

Can not open pdfs w/adobe reader for android on archos 10i tablet?

I can not open pdfs w/adobe reader for android on archos 10i tablet? How to fix it?

Hi Dennis, thank you for the reply. I have Adobe Reader installed and open. When I click on the pdf documents an error message box opens and says "Error. The document cannot be opened beacause it is not a valid pdf document". Perhaps the pdf's on the USB memory stick are corrupted. I can't open them on the laptop either. I'll reload them and try again.

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

I have a dell computer with windows xp. i can not download itunes it is looking for itunes.msi and because it can not find it, i can not download itunes 10, and i can not delete itunes from my computer. HELP!!!!!!

i have a dell computer with windows xp. i can not download itunes it is looking for itunes.msi and because it can not find it, i can not download itunes 10, and i can not delete itunes from my computer. HELP!!!!!!
What else can I do ?

Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

I can not seem to get the driver for my HP Photosmart C5180 with Windows 7. I can't find it.

I can not seem to get the driver for my HP Photosmart C5180, I can not seem to find it anywhere in the site,, I have 1 XP Pro and 2 Vista PC's running with my printer. I have been trying to find where I can find the driver for my HP Photosmart printer. Just tried to us a new Microsoft 7 PC. Where can I get it ?

From here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1153481&task=...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I can not change the region of DVD for region 4 (Brazil)

I can not change the region of DVD for region 4 (Brazil) what do I do? Help me. The drive is a MAT**bleep**A BD-CMB UJ141ES notebook and is a satellite Toshiba M645.

You might try AnyDVD. It's not a free solution, but might provide you a way around the region restricions.
There are other software solutions, you might start by reading or searching at the doom9.org forums.

I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??

I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??

Bryan,
You can download both at the same time.
But you may wish to start off with one and use it full time, then download the other later, so you get the maximum possible time with both.
If you have trouble getting the free trial on the Adobe site, you may try here or here:
http://prodesigntools.com/tag/ddl
http://technolux.blogspot.co.nz/2011/02/adobe-direct-download-links-less-akamai.html#more

JRockit_160_05_R27.6.2-20 can not get the correct os name for windows 2008

JRockit_160_05_R27.6.2-20 can not get the correct os name for Windows Server 2008 SP1 using System.getProperty("os.name").
System.getProperty("os.name") will return Windows Vista instead of Windows Server 2008 when running on Windows Server 2008 SP1. Is it a bug of this jdk?
I tested it on Sun JDK 1.6. It returns the correct name Windows Server 2008.
Any suggestion will be welcomed. Thanks in advanced!
Edited by: user4516182 on May 13, 2010 12:59 AM

Staffan, thanks for your update.
Do we have a workaround for it or fix it in new release?

Can not use fonts in MS Word for Mac!

I've Gurmukhi.ttf fonts (Punjabi fonts) appearing in System>Library>Fonts and I've ENABLED them as well but when i start MS Office for Mac , i can not use those fonts.
Please help.

Thanks for the screenshot. As far as I can tell, MS Word for Mac still fails to a) use the required different initial, medial, and final forms for Arabic characters, and b) connect the characters inside a word. This makes it unusable for composing Arabic. For more info on this script:
http://www.omniglot.com/writing/arabic.htm
http://homepage.mac.com/thgewecke/TypingArabic.html

Can not find WMA files in iTunes, for borrowing library books with Overdrive Media Console

I have borrowed audiobooks from the library, using iTunes and Overdrive Media Console for years. some months ago, I was suddenly unable to. thought it was my old computer, so bought a new one. took weeks to be able to get an upgrade from Windows, and when I was finally able to thought my troubles were over.
but, no, now the Overdrive Media says it can not connect to iTunes. someone at Overdrive said iTunes had to be the default player for WMA files, but I can not figure out how to make that happen, since there is nothing that looks like 'WMA files' anywhere on my computer. any advice? I can't afford to purchase audiobooks, and I really miss being able to borrow from the library. this new computer has Windows 8 OS

There is a OneClickdigital ereader available in the App Store. Download that to your iPod to read pdfs and books from the library. And you might need to download the OneClickdigital eaudio player to listen to audiobooks from the library. Once both are downloaded sync you iPod again to transfer them.

Can not see warehouse management data screens for material while extending.

I want to extend material for warehouse managment views.I can not see these views for the material in MM01.Looks like this is some thing to do with material type configuration.Can some one assist me how to do this?

1)Check whether the material exist for that plant and storage location which is assigned to warehouse number .
spro->enterprise structure->assignment->logistic execution->assign warehouse number to plant/sloc.
2) Check in OMS2 tcode in the material type setting WM view is selected.

Can not compose an aggregation EPCIS event for stanalone EPC(s)

Similar Messages

Maybe you are looking for