Can not connect my wireless printer to the new router.

Can not connect my wireless printer to the new router.

Can you please provide details:
1.  The make and model of printer
2.  Make and Model of Wireless Router
3.  Is your printer connection wireless to router or a cable to PC
4.  What have you done or attempted to do to establish a connection?
5.  Any further info to assist

Similar Messages

  • Can not connect All in one 209b to new router for wireless printing....

    Have an HP laptop and All in one priner 209b.  All was working fine, wired and wireless printing.  Then we had to upgrade our ATT Uverse router.  Everything works...even wireless laptop and printer when connected to laptop.  However, can't get printer to printer wireless since it has the old router info.  I used the disk but when it asks to you to pick the printer, I choose the printer but it says printer now found ??? what ???? and this is with the cable connected.  I do not have the wizard on the touch screen but I did reset to factory settings hoping it would load new router info but it does not.  How do you manually enter router into for wireless printing.  Is it best to delete the printer and reinstall as new...wired and then wireless ???
    I am about to call an outsite company and pay the outrageous charge as the help on HP is not working.  Thanks

    Try this utility:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&jumpid=reg_r1002_usen&lc=...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Mac 10.9.3 I can not connect C4780 to print on network.

    I recently changed router and can not install my C4780 printer to the wireless network, it use to work perfectly. In order to set it up on the new router I deleted the printer and was planning to install it as I did the last time but it wont work. I can get it to work by having it as a USB printer but I dont want that, its really annoying me!
    Please please please help!!

    Hi there,
    Thank you for your reply! In order to get an IP Address I would recommend the following:
    Restore the Network Defaults. (On the printer, select the wireless icon to access the wireless menu, and select Restore Network Defaults).
    Go to the airport icon, and look for hpsetup. Once connected Adhoc, the airport icon will change to a square. only then will you be able to print out the new IP by printing the Network Configuration Page. Printing a Network Configuration Page.
    The new IP will start with 169.254..  then you can go into the Embedded Web Server to run the wireless setup wizard. (To access the embedded web server, put the IP address into the address bar of Safari. Once at the Embedded Web Server click on the Network tab, then select Wireless Setup Wizard.
    Hope this is helpful, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I can not make a wireless bridge in the band 2.4 Linksys wrt1900ac

    I can not make a wireless bridge in the band 2.4 I make the same settings on band 5 and runs perfect

    I'd check to see if the 1900AC can bridge two WiFi connections at the same time. It may only beable to bridge one or the other radio at a time. I know that with the 5Ghz radio is bridged on the 1900AC, the 2.4Ghz radio is running and working as a wireless AP.

  • After i update my ipad 2(wifi 3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    after i update my ipad 2(wifi+3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK

  • Its my ipad 3 when i open appstore it says can not connect to app store and the same thing happens with itunes store

    its my ipad 3 when i open appstore it says can not connect to app store and the same thing happens with itunes store?

    1. Sign out of Apple ID and sign in again
    2. Settings>General>Date & Time>Set Automatically>On

  • Can I connect a wireless printer to two wireless networks

    I searched and couldn't find an answer to this exact situation. The answers to similar questions didn't seem to work.
    Can we share a wireless printer over two wireless networks without adding hardware or changing the wiring or doing complicated software modifications?
    Here is my set-up:
    Cable Modem> Linksys Wireless Router “N” on the first floor > older AirPort Extreme “G” via ethernet cable on second floor > Laser Printer via USB Cable on the second floor, plus an AirPort Express to extend the area on the second floor. We have 2 MacBooks and 1 MacBookPro that connect to the internet via either of 2 wireless networks. Generally, for better connection, you choose “N” if you are on the first floor and “G” for the second floor.
    Currently, if you want to print to the USB Printer, you just select it in the print dialog box. It does not matter if you are on Network “N” or Network “G.”
    We just added a new wireless Printer that’s on the first floor. (No, I didn't read the directions, the printer screen said if there is a W?? button on your router, press it. I did and it automatically connected to the “N” network. It also has its own email address for printing without a computer, but that still doesn't solve this question.)
    If you want to print to this printer, you must first change the computer’s AirPort setting to join the “N” network. If you don't, you still get the print dialog box, but eventually you will notice that nothing happens. The document just sits in the Printer’s queue.
    Is there a way to get a computer on the “G” network to find the wireless printer on the “N” network without first changing networks?
    Remember, it automatically finds the USB printer that is plugged into the “G” network router.

    It used to be that if you wanted to wirelessly extend the range of a network, you'd have to set up a WDS. (WDS = Wireless Distribution System.) There was no "Extend a wireless network" option and no "Allow this network to be extended" checkbox—you'd have to fill out lots of WDS information yourself. It was sort of a pain.
    Then, with the 802.11n AirPorts, Apple introduced the "Extend a wireless network" option, greatly simplifying the setup process. It accomplishes the same thing as a WDS, but it's easier to set up and has less overhead. However, it can only be used if every AirPort in the wireless network supports 802.11n.
    Your Express may support 802.11n, but your Extreme is older and does not. So "Extend a wireless network" won't work for your network. That's why you got errors when you set the Express's "Wireless Mode" option to "Extend a wireless network." Instead, you'll have to do things the old-fashioned way* and configure the Extreme and the Express to be part of a WDS. Your network will still work as desired: the Express will rebroadcast the signal from the Extreme, and clients will connect to whichever station has the stronger signal. It's just that you'll be using the older WDS technology instead of the newer "Extend a wireless network" feature.
    "Join a wireless network" is something different entirely. You'd use it if you wanted to connect to a network but not rebroadcast it. This could be useful when, for instance, your main router isn't an AirPort but you want to use AirTunes. In your case, however, this option wouldn't be very useful.
    Look at [this thread|http://discussions.apple.com/thread.jspa?threadID=2588489] for more information.
    *Actually, the old-fashioned way would be to use modems. Or to forget about the internet and send snail mail instead.

  • Can't connect to wireless printer

    I cannot connect a wireless printer...I have tried 2 printers. HP photosmart 6510 and Epson SX535WD....the wireless strength appears to be good on the printer but the MAC can't see it and neither can the iPhone or the iPad....Sooooo frustrating. Have brought back printers to shop as thought they were faulty...They immediately signed in to their own wifi and printed no prob from iPhone....spoke to my broadband provider. They suggested might be interference from cordless phone, so switched that off....no success, then they said something about changing the WPA to WEP....this is becoming way too complicated for something that I thought was going to be plug in and go....Should I just give up and buy an old fashioned USB type....will I ever be able to print from the iPhone or iPad as well....HELP!!

    My mother has been using an iPad. She wanted a printer. The media would think you just buy an AirPrint printer and you're good to go. I bought an HP PhotoSmart 6510. It connects to the wireless signal at my mother's home, but the iPad doesn't recognize that an AirPrint printer is available. Cisco (router) recommended disabling SSID, more or less. I disabled the "SSID broadcast" under guest access (I think I went further with the tech attempts than most other people) using the Cisco software (and rebooted the router, I think), but still no go. The iPad still doesn't recognize the presence of an AirPrint printer. Very frustrating. IF the iPad had a USB port we could go back to the era of cables and print that way, but that's obviously not a solution. Feel mislead. Under the current circumstances most people are going to be frustrated and mislead by the media hype that says, "You can print wirelessly from you iPad, especially if you get an AirPrint computer." Things are going to have to get much simpler for widespread acceptance of that notion. Most of us don't have hours to spend trying to sort out tech issues on our computers. Frustrating!

  • Can not connect to wireless network any more, missing command

    I can not connect to any wireless network. I have been having this problem for days. In desperation I installed 10.4 in a seperate HD. I clicked on the airport icon in the upper tool bar, selected my network name and clicked on "open internet connect" and I was connected, what?? I rebooted into 10.5 and tried the same thing again. But the panel that opens when you click on the airport icon has NO "open internet connect" command. A couple of weeks ago I reinstalled my OS. I have run diskwarrior and Techtool pro. Thinking back to the time I first installed 10.5 I don't remember ever seeing that command. Is Leopard compatible with the airport card? How do I get my "open internet connect" command back??

    It sounds like a problem between hardware and software. When you select your network, does anything freeze or does nothing happen?
    Nothing happens.
    Try this, open your Network Preference Pane, turn off airport off and delete the Airport connection by selecting "Airport" in the left pane and click the " - " button. Click on the "+" sign and create a new Airport connection. Hit Apply if it is available. Turn AirPort on and try to select your network and login if you can. The status should show Connected and an IP address should show up after of a couple of seconds.
    I get "AirPort has a self-assigned IP address and may not be able to connect to the Internet". On a couple of occasions (over the last couple days) I got you are connected to the internet on IP 172.17.90.251. However when I tried to open a web page I got the banner you are not connected to the internet. Strange, the pref panet said I was the Safari said I was not. Certainly the IP address does not show up in a few seconds. I also have ComCast cable but I need to use the MetroFi-Free wireless so my wife has the bandwidth to do her company work using VPN.

  • Can not connect to wireless networks with ipad 2

    My ipad used to connect to the wireless net at home and in public areas.
    Now all by the sudden it can't "see"  the network.
    Message: " could not connect to wireless network"
    I have tried "everything" also on different networks,
    except resetting the modem.
    My iPhone works, as do all my other computers.
    Modem is Zyxel P2812

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can not connect laptop wireless

    I have an Satellite A135-s4677 and I can not connect it to my router wireless. I just restored it to the out-of-box state and I can connect if I use a wired connection. But it wont connect wireless. I can get it set up all up the point were it ask you to label the location of the network it wont let me change it from unidentified to my home network. What's the problem?

    Hello,
    Try calling you internet service provider and have them set a new network account for the NB.

  • Why does the can not connect to App Store for the iPad Air? I click on popularity after searching and something pops up saying can not connect to App Store.

    I type in a app and sometimes it pops up saying can not connect to App Store, but it does go later on and when I click ratings or popularity it pops up saying can not connect to App Store. Idk why that happens anyone have same problem? Solutions?

    I have the itunes and app store working now, but my FB app and FB on Safari will not work and other websites are not working very well on Safari...any ideas?

  • Can not enable web services. printer on the network. default ip not connecting using auto ip

    B210 - have tried resetting defaults . default IP address will not connect to network with auto IP  had to set IP addrtess manually something similiar to the properties on the verzion hot spot. can not disable web services - never enabled.
    no Primary or secondary DNS server. not sure if this is problem. can print ok thru network.
    This question was solved.
    View Solution.

    Hey bobupton!
    Try going into the printer's EWS and using Google's public DNS servers (8.8.8.8 and 8.8.4.4). It sounds like you know what you're doing so I skipped a few steps on how to get there but if you need more help with it let me know!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Can't connect to wireless printer D110 Photosmart

    I've tried several times now to connect to this printer wirelessly - I'm in college and it is my roommate's printer, and she apparently didn't got through the whole process of inserting the cd and going through installation and so on, but is effectively hooked up wirelessly to the printer. Every time I have gotten the same message.
    "The IP address (my IP) of the PC and IP address 192.168.181.93 of the printer are not compatible. Turn off the power to the router and the printer. Wait 60 seconds. Turn on the power to the router and then the power to the printer. If the printer and PC IP address are still incompatible, reboot the PC."
    I can't turn off the power to the router because it's the residence hall router - dont even know where they are. But I have been through this several time now and just have no idea at all how to resolve it. Ideas?

    You need to be connected to the same network as the printer.  Does she have a wireless router in the room that the printer is connected to?  If not, even though it appears you are on one University network, it is likely many networks, all with the same name.  Each of these networks will have a different subnet (like the 192.168.181.X on the printer).  Look at your PC and find its IP address.  The first three sets of numbers will have to match the printer's.
    Need help?  Let me know what operating system you are using.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How can I use a wireless printer and the internet at the same time?

    Hi there, I just installed a wireless printer but to use it I have to click on the Airport icon and select the printer in the 'devices' list. This deselects my connection to my wireless modem. Is there any way I can print and look at the internet at the same time? This does not seem right to me, I print a lot of info from the net and don't want to spend time selecting and waiting for connection back and forth all the time.
    Bo

    I have a Linksys WAG54G2 wireless G router. This router has a Wireless Protected Setup button which I understood would initiate a search for wireless devices and aid setup but it seems to do nothing. I made the mistake of tryig to use the linksys installation disk to access a setup wizard and that just reset my entire network back to factory settings and it took me 4 hours to reconfig my system. Won't be touching that again. It all seems odd, the printer is compatible with the router as far as I can see but I don't know how to get the router to recognise the printer.
    bo

Maybe you are looking for