Can not connect the Cirrus Server, help me.

I am managing some On-line programs that use the Cirrus server.
They worked fine until yesterday, but today is not.
Please tell me what happen on the server.
I need help of Adobe so mush.

i'm not having any trouble connecting to Cirrus right now from my house.
our hosting provider, where the Cirrus servers are located, caused a connectivity problem for one of the many servers in our cluster from about 07:00 UTC monday til about 19:00 UTC monday. however, during that time, our plenty-of-redundancy kept the cluster operating normally. my utilization graphs show completely normal usage patterns during that time and up through now.  i rebooted the affected server at about 19:00 UTC, which cleared its problem and returned it to normal rotation in the cluster.
other than the reboot to clear the issue on that one server, there have been no changes to the cluster in quite some time.  please try the Cirrus sample application:
   http://labs.adobe.com/technologies/cirrus/samples/
if that works for you but your application does not work, then most likely you have made a change to your application or your networking environment, since no real change has been made to Cirrus.

Similar Messages

  • HT201263 the itunes tales me that can not connect to update server, i tried to connect my i pad ever ting is ok to the ipad but my iphone stop working after update and i tried all solutu=ion suggested on the internet please i need help

    after i update the iphone 4s to ios 6.1.1 my i phone stop responding and a message appear tell to connect to i tune i did all the solution and put my iphone in dfu mode and nothing happen my i phone is gone no solution and a message appear tells that can not connect to update server but my ipad work at the same pc the problem in the i phone, plz some help

    Was thje TM backup 10.6 also?
    I never use TM for Backups, far better less painful backup methods, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

  • Can not connect the iTunes Store, since the last update 2 weeks ago, iOS 6.1.2 has stopped working, help me, please ....

    can not connect the iTunes Store, since the last update 2 weeks ago, iOS 6.1.2 has stopped working, help me, please ....

    Ok, I am having literally identical issues with Marathon Max.
    I try to connect, and it says, "Itunes could not connect to the itunes store, Make sure your network connection is active and try again." I have contacted my ISP, and they ran a full check, and sayed I should be able to connect to pretty much all websites. I did the whole "ipconfig" thing and that was no help. I also tried the "msconfig" thing, and it sayed it did not recognize it as any kind of command, internal or external command or operable program or batch file. Whats strange is I can connect from another computer just fine, but when offered to upgrade itunes I declined for fear of the same thing happpening. I am tempted to just upgrade it and thus demonstrate that itunes has a flaw in their upgrade. I will save this computers diagnostics, and the other one's too, before and after the upgrade. I look forward to sending more feedback regarding this matter

  • Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

    Dear Fellas:
    I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
    mysql info:
    ps -ef | grep mysql
        0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
       74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
      501   952   947   0  3:52PM ttys000    0:00.00 grep mysql
    Please help!!

    Fascinated and guessing:
    Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
    I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
    Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
    Just speculating.

  • I can not connect the wi-fi network with my iPad Air

    I can not connect the wi-fi network with my iPad Air

    Hi there maurobats,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W. 

  • Essbase Administration Services "Can not Connect to Administration Server"

    Hi
    Here I am installed Oracle EPM 11.1.2.2 Essbase,Planning and Reporting and after sucessfull configuration. When I tried to open Essbase Administration Console and there is no option to open administration console and I opened the Hyperion extraction setup folder and I installed Essbase Administration Console setup manuallay and after sucessful installation I try to Open and when I create new server and ir=ts created and then I am trying to connect server its throw this error
    Error: Can not Connect to Administration Server
    Please give me possitive things.
    Thanks in advance..

    Did you deploy the web applications to one managed server in the configurator, if you did then EAS is probably running on port 9000 so you would need to enter the server in the EAS console as servername:9000
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • HT1918 How do I reset my account I have 0.91 $ I can not change the Store please help

    How do I reset my account I have 0.91 $
    I can not change the Store please help
    plz help

    Change your password
    iTunes Store: Retrieving and changing passwords (Apple ID)
    Alert itunes support
    https://www.apple.com/support/contact/

  • Can not connect the database via query string (C#). The SQL Server Management Studio is showing the full path of a location instead of database name.

    I can not connect to the database via C#. The database is showing full path of the database file instead of the database name. See the pic: a database showing only name 'emart' and the other database showing the full path.
    : Robby

    Hi,
    According to your post, I know that the database name is showing file path of the database rather than the database name in SQL Server Management Studio. You were not able to
    establish a connection to the database using C#.
    As Olaf said, was any error message thrown out when the connection failed? How did you create these databases?
    You can use the following T-SQL to attach the database and see if the issue persists.
    CREATE DATABASE
    databasename
        ON (FILENAME = 'filepath _Data.mdf'),
        (FILENAME = 'filepath_Log.ldf')
    FOR ATTACH;
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Can not specify the SMTP server port, username and password for my SharePoint 2013 web application

    We have our SMTP server under port number 141 and we should add username and password. but inside SharePoint 2013, I can only define the SMTP server name , from email, reply-to . But there are not fields to define the port number , the username and password.
    So can anyone advice from where I can define the port number and other field settings for the SMTP server ?
    Thanks

    i am no sure about user name and password. i never saw that option.
    check this guide:
    http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
    http://blog.fpweb.net/configuring-an-smtp-server-for-sharepoint/#.UuANoxAo6M8
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
    thanks for the reply, but in our case the SMTP is  a separate server , and to connect to it i need to define the ; server IP /Name , port number, username & password. but in SharePoint there is no option to define the port number , and the links you
    provide are regarding configuring SMTP server, while we already have an SMTP server but i need to connect SP with it . can you advice please?

  • How can I connect the remote server which is installed with oracle

    Now my computer is in my home,in my computer there is installed with the oracle 9i client,the server is also installed with oracle 9i,which is in my company.Now I want to use sql*plus to connect the database of the server through the internet work.I have created one listener service name in my home computer,but can't test successfully and the sql*plus can't connect the database.Who can tell me how to do it?Thank you!

    Technical questions need to be addressed to one of the technical forums-- Products | Database | Database - General in this case.
    Unless you are VPN-ing in or the DBA's at your company have configured Oracle Connection Manager to allow you to connect through the firewall to the database, however, I doubt this will work. If they have configured Connection Manager, you'll have to ask them to provide you with connection information. 99.9% of the time, you do not want people to access a database via the internet.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Lync2013 Best Practices Analyzer can not scan the edge server details

    Hi All,
    I encount one strange question that the Lync 2013 Best Practices Analyzer tool can find there's one edge server in the lync infrastructure when scanning, but the scan result does not display the edge server details as front end server (front end server can
    scan all details like hardware CPU, fqdn and so on. But the edge server has not)
    Anyone can help, much appreciated.
    Elva

    It seems a network issue.
    You should check you have the proper network access to Lync Edge Server as Lync Edge Server is not in the same subnet of Lync Front End Server.
    Lisa Zheng
    TechNet Community Support

  • TS1717 I can get on my itunes but when I go to update it has an error saying that I can not connect to update server. Any suggestions

    I can get on my itunes but when i go to check for updates it has an error saying that I can not connect to update servor. I checked my firewall and Itunes is checked for exceptions, any ideas

    See if this helps:
    Trouble installing iTunes or QuickTime for Windows

  • Ipad can not connect  the computer, Ipad can not connect  the computer

    My Ipad can not be recongised in my computer after the itunes being upgrad. I uninstall the new itunes and reinstall many times. But it still does not work. Ipad always be read as a camera. And the itunes can not find the Ipad.

    I have done the works according to the page's(
    http://support.apple.com/kb/TS1538) instruction. It did not work.

  • Can not connect Weblogic App Server 10.3 from Jdeveloper 10.1.3.5

    Hi Friends,
    I am trying to connect JDeveloper 10.1.3.5 to WebLogic server 10.3.
    I am facing some problems.
    I used JDeveloper 11g to do the same and it worked.
    I found that JDeveloepr 10.1.3.5 does not have any wizard for Weblogic 10.3 connection, all the available wizards are
    for server version 10.1.X.
    So Please tell me if it is at all possible to do this.
    The reason I am trying to do this is because I can not create composite applications, as my project works only with esb projects.
    As I am new to Oracle SOA suite, I accidentally downloaded JDeveloper 11g and SOA Suite 11g etc.
    But I found that JDEveloper 11g can not create any ESB projects, it can only create composite projects.
    So I downloaded JDeveloper 10.1.3.5. So please help me configure this IDE with the Weblogic server I have.
    If it is not possible, please suggest which App Server and OSB version I need to install.
    Many thanks in advance.
    Edited by: user10935249 on Aug 27, 2011 5:11 AM

    @sweetfa:
    Thanks a lot for your reply.
    Although, I have to work only with 10g, but this info is helpful in that I will not try doing something that is not possible anyway.
    And Mediator revealing the ESB project after migration was a completely new info to me and a pretty helpful one.
    Edited by: user10935249 on Sep 1, 2011 4:03 AM

  • Can't connect to Update Server - help!

    I un-installed and re-installed Snow Leopard, but now I can't connect to the update server, or even re-install properly from a Time Machine backup. When I try it says the updates can't be saved or can't connect to the update server - check your internet connection, but my connection is definitely working as I have contacted my ISP. I have tried verifying and repairing disk permissions, and some other stuff I have read on other support sites.
    Please help me, thanks in advance.

    Was thje TM backup 10.6 also?
    I never use TM for Backups, far better less painful backup methods, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

Maybe you are looking for