Can not connect to Airport after Lion

Hi folks,
I just updated my MacBook to Lion and now it will not let me connect to my airport. None of the setting changed on the airport. It just stoped connecting. I can however log on to it with my iPad. Any ideas?
I

Do you get an IP Address when you check under System Preferences->Network->WiFI ?
What wireless router are you using ? (make /model)
Did you try deleting the network from Preferred Network's and then re-joining the network ?
Did you try a SMC reset ? Some folks have suggested it helping.
When you scan for networks by clicking on the WiFI Menu Extra, does it see your wireless network ? What happens if you attempt to join this network ?
Also check if the password is correct in Keychain Access App. You could try deleting this network in Keychain Access and try to connect again.

Similar Messages

1 Macbook Pro can not connect the Airport Disk Others OK!

Have an airport Extreme with 1 Hard drive now installed. I have two Macbooks and a MacPro that can access the sharepoint fine but I have on Macbook Pro which will not connect, it seems that Finder just waits forever for a connection.
What have I screwed up on the mac? Is there a plist or something I need to delete or reset?
Thanks

Problem solved it was the AEBS. Powered it down for 30secs then restarted seemed to solve the problem. Obviously Resetting it from the Airport Utility does not fully "Reset" it.

Can't connect to Airport after firmware update

Ever since I updated the firmware on my Airport I can't connect to it any more. I'm pretty sure I installed everything properly and reset the Airport several times but still no luck in connecting to it. Any suggestions?

DomPoggi wrote:The Airport Utility said firmware on each Airport Express needs to be updated, so I did it.
Dom
Firmware updates on the Express sometimes results in scrumbled settings.
Check that WiFi is disabled on your MacBook.
Then connect (preferabely with a LAN-Cable) the MacBook to the Express.
Open Airport Utility on the Mac and switch to the Express.
Use the wizzard to set up the Express from scratch or use manual setting zu check the settings.
Lupunus

IPad Air can not connect to internet after updating to iOS8.

Safari CAN NOT OPEN ANY PAGES because the iPad is not connected to internet. I updated to iOS8 last night and have been trying to reset my ipad as well. However, the problem is still there. It even says my Apple ID incorrect. GUYS! DO NOT UPDATE YOUR iPAD TO iOS8 UNTIL FURTHER NOTICE!!!!!!!! Luckily, I did not do anything with my phone. PHEW

Other threads I've read have had people note that the following solutions have worked for them:
If you have a 5 GHz wi-fi router, turn off 5 GHz support and let it fall back to 2.4 GHz.
Change wi-fi router to auto-select channels, or manually select a different channel than what it's on now.
Disable iCloud Drive.
I'm not saying that that any of these will work, but it's something to try (one at a time).

Can not connect to DB after this message: ORA-1654: unable to extend index

Hi Experts;
Right now I got this problem in my DB, ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX.
But, I was trying to connect to the DB, but it's not accepting connections.
This DB is oracle 9i , running in Red Hat Enterprise Linux ES release 3.
I was looking thru google, but all the options is to alter the tablesplace/datafile, but I can not do that, because I cann't connect.
Have an idea, what can I do?
Please, any idea is welcome.
Thanks for your help.
Regards
Al

Here are the lines requested:
hu Jun 14 22:00:21 2012
Thread 1 advanced to log sequence 52031
Current log# 3 seq# 52031 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g3_01.log
Current log# 3 seq# 52031 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g3_02.log
Fri Jun 15 05:00:36 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Fri Jun 15 21:00:46 2012
Thread 1 advanced to log sequence 52032
Current log# 2 seq# 52032 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g2_01.log
Current log# 2 seq# 52032 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g2_02.log
Sat Jun 16 05:00:48 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Sat Jun 16 19:07:19 2012
Thread 1 advanced to log sequence 52033
Current log# 1 seq# 52033 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g1_01.log
Current log# 1 seq# 52033 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g1_02.log
Sun Jun 17 05:00:20 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Sun Jun 17 22:00:48 2012
Thread 1 advanced to log sequence 52034
Current log# 3 seq# 52034 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g3_01.log
Current log# 3 seq# 52034 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g3_02.log
Mon Jun 18 05:00:19 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Mon Jun 18 22:00:47 2012
Thread 1 advanced to log sequence 52035
Current log# 2 seq# 52035 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g2_01.log
Current log# 2 seq# 52035 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g2_02.log
Tue Jun 19 05:03:21 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Tue Jun 19 19:09:42 2012
Thread 1 advanced to log sequence 52036
Current log# 1 seq# 52036 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g1_01.log
Current log# 1 seq# 52036 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g1_02.log
Wed Jun 20 05:00:34 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Wed Jun 20 21:22:40 2012
Thread 1 advanced to log sequence 52037
Current log# 3 seq# 52037 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g3_01.log
Current log# 3 seq# 52037 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g3_02.log
Thu Jun 21 05:00:54 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Thu Jun 21 21:00:12 2012
Thread 1 advanced to log sequence 52038
Current log# 2 seq# 52038 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g2_01.log
Current log# 2 seq# 52038 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g2_02.log
Hope you can get a better idea of this problem.

Ipad 2 can not connect to server after 2 day internet outage

Situation:
Internet access was down 2 days and was just restored
Restarted router
iPad 2 connected to appropriate wifi network, but got error message "could not connect to server" when using Safari. Also, could not access any other internet related service like web email.
Other devices --- iPad air, Mac, PC laptop and 2 iPhone 4s ---- were able to connect and access internet successfully.
Actions Taken:
Powered off iPad 2 and then restarted it. No luck.
On iPad 2, turned off wifi setting and then turned it back on. It connected to appropriate network, but still could not connect to server.
Reset router again --- no luck.
Question:
Any suggestions?

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

Can not connect to airport time capsule

Here is what the current situation is:
I can setup the Airport Time Capsule (3GB) form my Mavericks 10.9.4 MacBookAir 2013 using AirPort Utility. However, after setup, I cannot connect to the time capsule using many of the standard ways. Trying both connections of wired and wireless. I have tried:
1. Connecting to the Time Capsule using Time Machine (which I can see the Time Capsule Drive as a selection), and I always get the error "There was a problem connecting to the server “XXXXXX”. Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator."
2. Using Finder side bar under Shared (which I can see the Time Capsule Drive as a selection), clicking on it, always says Connection Failed at the top of the window. Clicking the Connect As... button results in the same error message as #1.
3. Using Finder, connect to server option, entering the name of the time capsule with .local at the end, and using the ip address and it always returns the same error as #1.
Trying option #3 and looking at the Console for error messages always produces these two messages:
Date Time NetAuthSysAgent[1093]: ERROR: AFP_CreateSessionRef - AFPLoadModules failed 22
Date Time NetAuthSysAgent[1154]: NewAFPLoadModules: bootstrap_look_up failed Unknown service name
Any help would be much appreciated. My computer has security scripts run on it that my company wrote inhouse and not sure exactly what is locked down and not locked down. Thank you.

Using method 3.. try
SMB://TCname.local or SMB://TCIPaddress (I hope obvious you replace with actual name or actual IP).. Please use names that are SMB compatible.. ie short, no spaces and pure alphanumeric.
No luck try CIFS:// etc.
This forces it to SMB1.
No luck ping the TC in terminal.. does it respond??
Do you have ipv6 set ot link-local only in the computer??
Your company may have locked you out.. I would not be surprised. Are you running a vpn on the computer whilst trying to connect to the local network. That will fail and the ping test will show you why.
Date Time NetAuthSysAgent[1093]: ERROR: AFP_CreateSessionRef - AFPLoadModules failed 22
Date Time NetAuthSysAgent[1154]: NewAFPLoadModules: bootstrap_look_up failed Unknown service name
Interesting.. it is blocking AFP perhaps. AFP modules refused.. I do not know the errors well enough but if AFP fails there is a good chance TM won't work. So even if you can mount and access the disk I am not sure you can do TM backups.

Can not connect to SAPRouter after OS/DB Migration

Dear Expert,
After did OS/DB migration from Solaris to HP-UX we have same problem with the saprouter. I try to connect to saprouter via SM59 (test connection) but I cannot create a connect and the error say partner not reached (host 172.31.1.34, service sapdp99). I old system we can make a connection through SM59.
I also tried to see the log error in ST11 and below is the result:
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2467
LB: Hostname or service of the message server unknown
DEST =SAPOSS
MSHOST =/H/172.31.1.34/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
R3NAME =OSS
GROUP =EWA
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: MLAYUK (Client: 300)
Destination: SAPOSS (handle: 2, , )
I also have made some changes in file saprouttab in sap router server. I have added the ip address of my new SAP server, but error same. Can you tell me what things I miss to do?
Thank you for your help.
Regards,
MAL

i can ping the saprouter server. I have compare the services in old and new server. There are some services missing in my new SAP Server. Below the services available in both system:
old server
   sapmsRP1        3600/tcp        # SAP System Message Port
   sapdp00 3200/tcp        # SAP System Dispatcher Port
   sapdp00s        4700/tcp        # SAP System Dispatcher Security Port
   sapgw00 3300/tcp        # SAP System Gateway Central Instance Port
   sapgw00s        4800/tcp        # SAP System Gateway Security Port
   sapdp01         3201/tcp        # SAP System Dispatcher Port
   sapdp01s        4701/tcp        # SAP System Dispatcher Security Port
   sapdp99         3299/tcp        # SAP System Dispatcher Port
   sapdp02         3202/tcp
   sapdp02s        4702/tcp
   sapgw02         3302/tcp        # SAP System Gateway
   sapgw02s        4802/tcp
   sapgw01         3301/tcp
   sapgw01s        4801/tcp        # SAP System Gateway Security Port
   sapgw03         3303/tcp        # SAP System Gateway Central Instance Port
   sapgw03s        4803/tcp        # SAP System Gateway Security Port
new server
   sapmsRP1        3600/tcp        # SAP System Message Port
   sapdp00 3200/tcp        # SAP System Dispatcher Port
   sapdp00s        4700/tcp        # SAP System Dispatcher Security Port
   sapgw00 3300/tcp        # SAP System Gateway Central Instance Port
   sapgw00s        4800/tcp        # SAP System Gateway Security Port
   sapdp99     3299/tcp      #SAP System DIspatcher Port
should i add the missing services in my new server? and should i keep the added-new server in file saprouttab?
Thank you
Regards,
Mikael
sapdp10 3210/tcp        # SAP System Dispatcher Port
sapdp10s        4710/tcp        # SAP System Dispatcher Security Port
sapgw10 3310/tcp        # SAP System Gateway Port
sapgw10s        4810/tcp        # SAP System Gateway Security Port

Can not print from preview after Lion Update

I can't print from preview since I updated to Lion. After I hit command P or select print from the file tab preview totally freezes up and gives me the spinning wheel of death until I force quit preview. I have no issues printing from anything else, such as word, excel, web pages. So I don't think it's a printer/driver error. Help?

I would still mention what printer you have and make sure you have the latest printer driver.

CAN NOT connect with airport ??

I cant connect with my Airport, to my 2wire Home Portal 1000HG for some reason it always says There Was as Error joining Airport Networke "2WIRE538" it works fine with the LAN cable, but I would like to use it with wireless sometimes to, if anyone could help that would be awsome, I just dont want to sit on the phone with SBC yahoo or 2Wire for 5 hours

I suspect the version of the 2 wire you are using has one of 2 things either it is the wrong model for wireless connection, there are several, as shown.
http://computers.search.ebay.com/2wireDSL-ModemsW0QQfsooZ2QQfsopZ2QQsacatZ62023
If you have the correct 2 wire for wireless you may not haave the correct firmware, as shown below.
http://www.broadbandreports.com/faq/12110
Cheers Don

Can't connect to Airport after installing iTunes 8

worked flawlessly before the upgrade. now wireless connection does not work. it seems to act like it is connected on both ends, but no sound... ***?

Usually when a firmware change fails on any device you must take the device back to the manufacturer.

TS1368 Can not connect to iTunes after updating to 10.7 on window Vista 64bit. "Uknown error - 42408"

Just updated to iTunes 10.7 on Windows Vista 64bit and now when I try to connect to the iTunes store and just get "Uknown error has occured-42408" Please help!!!!!!!

Many thanks to the other hemisphere!
SpeedBit Video Accelerator - I cannot uninstall it, so I have upgrade it. Store is accessible now!
The only but is there are again some problems with upgrading from 10.6 to 10.7, but this is another story.
Thanks again,
Martin

After software Update (2006-07), airport can not connect to the router

Hi,
I installed the software update 2006-07. Afterwards the airport extreme can not connect to the router anymore (NETGEAR). I use a WEP key, but even if I type the WEP Key, the airport does not succeed to the router anymore... I called Apple Care and they wanted that I install the firmware restoration. But even I didn't succeed to install the firmware restoration. On the firmware restoration web page (http://www.apple.com/support/downloads/firmwarerestorationcd12.html) is written that I have to turn on the computer and continue holding down the power button until the LED blinks rapidly followed immediately by a successive series of blinks (3 quick blinks, 3 slow blinks, 3 quick blinks). But after the LED blinks, there is not the successive series of blinks...
I know there is 2 questions in one message, but could you please help?
Thanks in advance.
Best regards,
Eric
MacBook Pro Intel Core 2 Duo Mac OS X (10.4.8)

http://forums.macosxhints.com/showthread.php?p=337100
Exactly the same problems as mentioned here kernel panics, etc. How could this have passed Apple Quality Checks?
Tue Dec 5 09:26:34 2006
panic(cpu 0 caller 0x000A8800): Uncorrectable machine check: pc = 000000003931288C, msr = 0000000000149030, dsisr = 40000000, dar = 000000003A207F7E
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095138 0x00095650 0x00026898 0x000A8800 0x000A7A90 0x000AB780
Proceeding back via exception chain:
Exception state (sv=0x39D1B780)
PC=0x3931288C; MSR=0x00149030; DAR=0x3A207F7E; DSISR=0x40000000; LR=0x39312858; R1=0x2285BA10; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x39312848 0x393139B8 0x39333874 0x393336BC 0x393332F0 0x3933313C
0x002D124C 0x393314AC 0x39332774 0x002EB838 0x0008C6A4 0x0002921C 0x000233F8 0x000ABAAC
0x00000000
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(405.1)@0x392f4000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x386e6000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x32922000
Exception state (sv=0x39D3A780)
PC=0x9000AB48; MSR=0x0200F030; DAR=0x003B8000; DSISR=0x42000000; LR=0x9000AA9C; R1=0xBFFFCCA0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
Just by enabling the airport express card. Now I wonder what triggers the bug. Because I rebooted several times after the update. One thing I did see was the signal strength going less strong in the past days. Since today I cannot use it at all.

HT3986 After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system

After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system.
I donot think I have a install disk when I bought my mac, there is only a disc partition for recovery system.

Welcome to the Apple Support Communities
You have to install Boot Camp drivers. On Mountain Lion, you have to download them.
First, press X key while your Mac is starting to start into OS X. Then, open Boot Camp Assistant and select the option to download the drivers. You will have to burn them into a DVD or USB drive, so after downloading them, restart and install them into Windows

After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
Anyone know what is wrong with it??
Is something wrong with mountain lion or the wifi itself????
HELP PLEASE!!
I need to use the internet desperately but i cant...
Thank you so much xxx

Hi galleryskins,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
OS X Mountain Lion: Zoom content on the screen
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
I hope this information helps ....
Have a great day!
- Judy

Can not connect to Airport after Lion

Similar Messages

Maybe you are looking for