Can not connect to old airport express

I can not connect to old airport express with new mountian lion and airport utility?

You will need to install AirPort Utility 5.6 on Mountain Lion.  This article will tell you how:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
This works for most users, but we cannot guarantee that it will work for you. Up to you to decide if you want to try this unsupported method.

Similar Messages

  • AirPort Express - Can not connect to "extended" AirPort Express

    Two trips to the Genius Bar tell me that I should be able to Extend my network from a new AirPort Express (n/g/b) to an older AirPort Express (b/g) using the "extend network feature". The two devices are communicating (both lights are green and the wireless channel will change on the remote device if I change it at the base station), but my MBP Core Duo 15" seems to only be connecting to the AirPort Express Base Station (n/g/b) and not to the Remote "extended" AirPort Express (b/g).
    This forum seems to indicate that you can only use WDS between the newer AEX (n) and the older AEX (b/g) but the folks at the Apple Store have told me twice now not to use WDS. They said that as long as the two devices have green lights that it is working, but when I click on the Airport Symbol up in the menu bar w/the Option key it tells me the MAC address of the base station only - and when I get very far from the base station, the signal drops out even though the remote AEX is near by.
    I did try setting it up using WDS and that works fine, just very slow.
    Anyone know if there's a way to be sure that my MBP connects to the remote (extended) AirPort Express?

    This forum seems to indicate that you can only use WDS between the newer AEX (n) and the older AEX (b/g)
    This is correct....since the older b/g Express does not even have a setting to "extend a wireless network".
    If you require confirmation, open AirPort Utility, select the b/g Express, click Manual Setup
    Click the Wireless tab below the row of icons
    Now look at the available settings for Wireless Mode.
    "Extend a wireless network" is not there.
    but the folks at the Apple Store have told me twice now not to use WDS.
    They are likely telling you not to use it because the performance on your network will drop dramatically if you do use WDS. Or, they mean well, but they are just wrong on this subject. Here's why:
    The only way that you can use an older "g" and newer "n" device together to provide more wireless coverage is to configure both devices for WDS. It's a Catch 22.
    WDS operates only at "g" wireless levels. So when you configure the newer "n" Express to operate as part of the WDS (which you must), it becomes a "g" wireless device. You lose any "n" capability on the network
    Worse still, every "remote" or "relay" in a WDS setup cuts the bandwidth of the entire network in half...50%. That's huge. In effect, with WDS, you may have a bit more wireless coverage, but you will have a "g" wireless network that operates at half speed.
    but when I click on the Airport Symbol w/the Option key it tells me the MAC address of the base station only - and when I get very far from the base station, the signal drops out even though the remote AEX is near by.
    The remote AX is not providing any additional wireless coverage.
    They said that as long as the two devices have green lights that it is working
    Nope, as you can tell by the fact that your "remote" is not providing any additonal wireless coverage.
    Anyone know if there's a way to be sure that my MBP connects to the remote (extended) AirPort Express?
    Your only option, (unless you add more hardware):
    Configure both AX devices to "Participate in a WDS network" setting one up as a "main" and the other a "remote" . The big downside, as mentioned previously,  is that you will have a "g" wireless network running at half speed.

  • My system can not connect with the Airport Express while the signal is very good?

    Neither my phone nor my desktop (windows 7) can not make a connection with the Airport Express. The signal keeps flashing amber.
    Several specialists have checked but can not solve this problem. Any ideas?

    I am in exactly the same boat...

  • Can I use an old Airport Express to extend the range of a new Airport Express?

    Hi all.  I have an old Airport Express 802.11g (First Gen?) that is starting to fade.  Still works, but not what it used to be.  So I am going to buy a new Airport Express.  I'm not interested in the Airport Extreme.
    Question:  If I use the new Airport Express as my main wireless router, can I plug my old Airport Express into another room as an extender?  In other words, with the old Express and the new Express talk to each other or will a new Express only allow extension with another new Express?
    Thanks!

    Sorry, but the old AirPort Express 802.11 b/g does not have a setting to "Extend a wireless network", so it cannot be used as a extender with the newer AirPort Express if you plan to connect wirelessly.
    If you plan to connect the older Express using a permanent wired Ethernet cable connection, then it could be configured to provide additional wireless signal coverage in that manner.

  • How can I use my old AirPort Express?

    How can I use my old AirPort Express (the one that plugs right into the wall without a power cable) to stream music to a stereo when I am using the new Airport Express?  The AirPort Utility 6.1 will not recognize the old AirPort Express.

    Apple does not make it easy for you to use an older device when they want you to buy newer devices.
    See this link for tips on how to install a version of AirPort Utility on Mountain Lion that will allow you to configure your older Express:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
    This is not supported by Apple, so it is your decision on whether you want to move forward with this. It works fine for me, but I cannot guarantee that it will work for you, nor offer support if you have difficulty.

  • My Ipad will not connect to my airport express

    I was having a sound issue so I reset my Ipad.  Now it will not connect to my Airport Express for internet.  The message I get is to contact Apple Support.

    Hello sgraziano,
    I suggest taking a look at this article named iOS: Troubleshooting Wi-Fi networks and connections found here http://support.apple.com/kb/ts1398.
    Follow these steps to troubleshoot the above issues.
    Be sure that you are in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
    Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
    Note: You will need to enter your Wi-Fi password again if your desired network requires one.
    Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
    And this section at the bottom if that troubleshooting does not resolve hte issue:
    Unable to connect to a Wi-Fi network
    Verify that you are attempting to connect your desired Wi-Fi network.
    Make sure you are entering your Wi-Fi password correctly.Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
    Take care,
    Sterling

  • How can i change my old airport express password with mavericks

    I just bought a new TV and I am trying to connect to my wi-fi, which runs via an old Airport Express. The TV manufacturer says that I should try changing my password from a WEP to WPA - but it seems that I can't even access my Airport Express because it's not supported by Mavericks. Is there a work-around, or do I need to upgrade my Airport Express? It's running fine otherwise - supports multiple laptops and iPhone.

    Hi green jean
    Try this > http://www.apple.com/airportextreme/features/printing.html
    but also see > http://docs.info.apple.com/article.html?artnum=305293
    Dennis

  • Can't connect to Apple Airport Express wi-fi

    Hi folks,
    2nd gen iPT, OS is up to date. At my home, it connects to my Airport Express wi-fi network just fine. But at my parents home, it does not. It sees the network, asks for the password, I type it in, and it rejects it saying it cannot connect to the network. I set the network up myself, I know the password, I just can't figure out what the connection problem is. Any ideas? Any typical things that are overlooked? Any glitches that I haven't anticipated (like using one versus another security protocol on my parents' network)?
    Thanks,
    -- Josh

    Is it the same Airport Express that you're physically taking to your parents home and plugging it into their network, or do they have their own Airport Express which you're trying to connect to?
    If it's a different Airport Express, I'd compare all the settings in the Airport Utility at your home with all the settings at your parents.
    If it's the same Airport Express, maybe you've got some settings in there which are specific to your home network i.e. different IP addresses. Try setting it up for DHCP.
    Can other wi-fi devices connect to it, or is it only the iPod touch that's having problems?
    Incidentally, I take my Airport Express where-ever I go and frequently connect it to different networks without having to reconfigure it, so if this is what you're trying to do, its certainly possible.

  • HT5022 Airport Utility 5.6 does not fix the old Airport Express!

    My old airport express does not work anymore - the Airport Utility 5.6 makes changes but after re-starting, the Airport Express cannot be found. Now I am forced to buy a new one. Not good (and sold out as many experienced the same apparently)

    Do you get any sort of error message when you try to install, and if so what does it say?

  • Airport Utility can not see my 2 airport express.

    It does see my airport extreme but it has stopped seeing the 2 express stations.  I have had this set up for years and play iTunes to stereo systems in 2 different rooms in the house.  But it just crashed and lost the connections to all three base stations.  I have been able to reset the Airport Extreme but Airport utility now will not find the 2 Airport Express units that I have.  These units are 802.11g capatible.

    I have been able to reset the Airport Extreme but Airport utility now will not find the 2 Airport Express units that I have.
    Suggest that you perform a Factory Default Reset on each AirPort Express (AX) and then reconfigure them to "join" the wireless network that is being provided by the AirPort Extreme.
    Power down the AX for a moment
    Hold in the reset button and keep holding the reset button in while you plug the AX back in to power
    Release the reset button 8-10 seconds after you plug the AX in to power
    Allow 40-45 seconds for the AX to restart back to a slow, blinking amber light
    At this point, the AX is providing a wireless signal with a name like Apple Network xxxxxx. You must log on and connect to this network (no password is required) first, then open AirPort Utility, select the AX and click Continue to follow the guided setup.
    You also have the option of configuring using Ethernet by temporarily connecting an Ethernet cable from your PC to the AirPort Express if you do not want to configure it using wireless.

  • Intel iMac Not Connecting to My Airport Express

    I have had a 15" G4 Powerbook for about 1 1/2 years now and have not had any problems with my Airport Express. I purchased an Intel iMac back in February and everything has been working perfectly until about two weeks ago. (I think this may coincide with the update 10.4.9).
    At first, the Airport would not connect at all after being put into sleep, either if I let it sit or pushed the button myself. I would have to restart to get it to work. Now, whenever I attempt to connect to my Airport Express it says there is an error and only gives the options of trying again or just clicking OK. If I try again it does nothing, but if I click okay the Airport card in my iMac seems to go down completely and I am unable to see ANY wireless networks at all! It comes back eventually and automatically connects to an unsecure network somewhere else in my apartment building, but if I try to connect back to my Airport Express the same thing happens again.
    The odd part is that my Powerbook connects flawlessly, and also sets up the Airport Express if I reset it (something the iMac will not do). I have read through some of the threads and see there is an issue with the release of 10.4.9, but my Powerbook has it as well and doesn't have any issues.
    I also have Vista premium installed and that has absolutely no problems connecting to the network either, which is irksome every time I see a PC vs Mac ad.
    I have tried a couple of the remedies offered up: deleting the SystemPreferences folder in the Library (couldn't find it), creating a new location (didn't work), and reinstalling OSX (worked for a day after the 10.4.9 update).
    If there is anyone with similar problems who has found a solution, please let me know, as I don't really like using someone elses network, but don't really have a choice if I need to use my iMac. Thank you for your help.
    iMac 17" 2Ghz   Mac OS X (10.4.9)  

    Hello sgraziano,
    I suggest taking a look at this article named iOS: Troubleshooting Wi-Fi networks and connections found here http://support.apple.com/kb/ts1398.
    Follow these steps to troubleshoot the above issues.
    Be sure that you are in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
    Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
    Note: You will need to enter your Wi-Fi password again if your desired network requires one.
    Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
    And this section at the bottom if that troubleshooting does not resolve hte issue:
    Unable to connect to a Wi-Fi network
    Verify that you are attempting to connect your desired Wi-Fi network.
    Make sure you are entering your Wi-Fi password correctly.Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
    Take care,
    Sterling

  • Can't connect with my airport express

    When trying to connect to my airport express tool I get the error code 10057, can anybody help??

    Try this:
    https://discussions.apple.com/thread/3289924
    Kind regards,
    Jason Havens
    Destin, FL, USA

  • My iPod Touch was not connecting to my Airport Express router (which was "extending" a network as a WDS repeater) -- SOLVED!

    My problem was this. I have a large apartment with concrete walls, so just one wireless router would not work. I used apple Airport routers and used one of them (an airport extreme) to create my wireless network, and a number of other ones -- airport expresses -- to "extend" the network.
    That's all great, but I found that a couple of my devices -- mainly my iPod Touch -- would refuse to connect to the repeater airport express routers -- it only wanted to connect to the main Airport Extreme router, not the satellite guys.
    Finally I solved the problem.  It had to do with how the wireless network's configuration for "Radio" setting was set regarding 802/11 b/g, and the dual-band ability of the Extreme. Below is the description of how I fixed it.
    ======SOLUTION THAT I POSTED======
    I've pretty much solved this problem. I do not FULLY understand why, but now I can have my iPod touch (and I am hoping my kindle) attach correctly to the satellite/repeater airport express.  Here is what I did:
    I did two configuration changes to my central hub airport extreme router (i.e., the one that my other routers were merely configured to "extend.")  I realize now that these are both configurations that must be done at that central router, and the repeater routers then simply mimic or reflect accordingly.
    -- First, I used the most recent Airport Utility (v6.0) and clicked on my main router (which, crucially, is an airport extreme that has dual band 802.11, both 2.4ghz and 5ghz.)
    -- In the airport utility, I clicked on that Extreme router and then in its funky popup window, clicked Edit.
    -- Clicked the tab called Wireless.
    -- Clicked on Wireless Options button.
    -- the first config change I made on that page was to change the Radio Mode setting to "802.11a/n - 802.11 b/g." 
         What nobody really tells you is that that hyphenated choice means that the 5GHz band will use the first of those two (namely, a and n, in other words the strong modern N standard will be used on this band ONLY) ... while the 2.4GHZ band will use only the second of those two, b/g, in other words, the devices that only can use that older weaker standard.
         So, it's kind of a segregation. I'm telling it "No, don't let the 2.4 ghz band try to handle traffic using N. That band will just take care of the old crappy clients."
    -- the second config change that I made on that page was to check the check box to make a totally separate wireless network name for the 5GHZ band.  Further segregating things.  When I tried my solution without this additional step, my problem did not fix itself, though I don't fully see why.
    As I said, a few questions remain in my head, but the darn thing works, so I'm happy. Among many other questions... are those airport expresses dual-band too? I didn't think they were but somehow they are repeating this dual-band strategy?  Whatever. it works.
    BY THE WAY -- I recommend using the Apple question/answer board on StackExchange to get Apple-related answers. It is at http://apple.stackexchange.com/

    To demonstrate, here's a screenshot from the Airport Utility on the iPod Touch in close proximity to the Express, still connected to the Extreme :

  • How can i use my old airport express with my new imac and wireless hp print

    i just bought my first imac (intel) and a wireless hp printer. i now realize that a wireless connection between my imac and my printer needs a router.
    i have an airport express base station, which is a few years old. I can't find my documentation, so i don't know its specifications.
    how can i find out the specs of the airport express i have and whether i can use it now? it says that it is model a1084 100-240v~ 0.2a 50-60 hz.
    does that tell any knowledgeable people out there about the specs? can i search the apple website by serial number and find the specs?
    thank all of you potential responders ahead of time.

    Hi green jean
    Try this > http://www.apple.com/airportextreme/features/printing.html
    but also see > http://docs.info.apple.com/article.html?artnum=305293
    Dennis

  • How can i connect my existing airport express to my new time capsule network?

    I have an older airport express for wirelessly extending my network in my apartment. I bought a new Time Capsule and my airport express flashes amber and cannot find the time capsule to connect. How do I get them connected?

    You can use the USB3 connections for USB2.  That's downward compatible.  Just runs at USB2 speed.
    Just this week apple announced a couple of TB adapters, TB-to-ethernet and TB-to-firewire.  But the FW adapter is not at the apple store as yet (at least at the time I am posting this).

Maybe you are looking for