Can not connect to one other mac in in-house Ethernet network 10.9.2
I have a small inhouse ethernet network with 3 Macs
All mac´s are running under 10.9.2
On my main mac I see both other macs as approved. When I select the first mac, put in my user ID and password I can connect.
The other mac will not connect; "connection failed" and I see on the console:
27.02.14 15:13:38,186 NetAuthSysAgent[243]: RPC to srvsrvc gave error 0x16c9a042
27.02.14 15:13:38,187 sharingd[212]: SDSharePointBrowser::handleEnumerateCallBack returned -6600
Up to today both connection were working fine; but today I updated to 10.9.2 - but I am not sure if that coused the problem.
Has one any suggestion?
Thanks
Hans
In the meantime I have reinstalled OSX 10.9.2; repaired permisions - no effect.
The settings on both other macs are the same.
No suggestions????
Similar Messages
-
10.6.8 MBPro Screen Sharing suddenly can not connect to our other Macs.
We've used Screen Sharing from our MBPros for the past few years to manage our Mac file & media servers. Last year we replaced our G5 file server with a Mac Mini with Lion server. No problems - we could still use Screen Sharing to manage both this Lion file server and the Snow Leopard MacPro that's hooked up to our TV (among other things).
Friday morning my MBP could not see or connect to the Lion file server - the MBPs have the Lion server's data drives in Login Items so they mount when we log in. I also cound not Screen Share to either the Lion server or the SL MacPro. I checked the MBP's ethernet connection and could get to our router and the internet. When I tried to connect via Screen Sharing (by using the Share Screen... button in a Finder window, by using the Connect to Server command with vnc:// protocol, or by using the ScreenSharing menulet) I would get the "Connecting to Lion server" alert but nothing further. I left it for 10 minutes or so and it eventually disappeared but the connection never opened.
I checked the two servers and both were up and running. From the SL MacPro I could use Screen Sharing to get to the Lion server - and my MBPro too. From the Lion server I could Screen Share to the MacPro and my MBPro also.
The problem appeared to be with my MBPro. I switched to an unprivledged user account on it and found I could then get to both servers using Screen Sharing. So it was just my account on the MBPro. Rebooting did not help. Turning on AirPort, connecting to our home AirPort Extreme and unplugging the ethernet cable did not change anything with my account connecting to the servers.
I figured something somehow got pranged in my account's credentials. I used Keychain Access to delete all keychains containing the servers' names, IP addresses or sharing. I was asked for my credentials when I mounted the server's shared drives, but not when I tried Screen Sharing - got the same "Connecting to Lion server" or "Connecting to media server" dialogues and was never asked for username or password, but never connected either.
I cleared all caches using the utility Maintenance in case my MBPro was using invalid cached info. No improvement.
Saturday morning I shut down everything on our entire network - FiOS "modem"/router, Netgear gigabit switch, AirPort Snow, AirPort Extreme, MacPro, MacMini, both MacBookPros... even the FiOS cable box. Still no improvement.
IPv6 is disabled on the Lion server. All the Macs have all curent updates applied.
I've spent most of today Googling for solutions and trying them out. None have worked - though I see several very recent reports in these Apple Communities about Screen Sharing suddenly not working.
I really do not want to have to move to a new account on my MBP - and what's to say it won't happen again? Anyone have other suggestions?sunnovagun!
Hitting the Log Out button in the MobileMe panel worked. I can now connect to both the SnowLeopard and Lion servers just like I used to.
My condition appears to have been slightly different from yours, gmia - the MobileMe on my MBP had the correct info, but hose are not the credentials i use to remote to the two servers. I'm guessing that for some reason ScreenSharing began using my MobileMe credentials instead of what I had saved in the keychains.
Wonder if it had anything to do with the shutdown of the MM servers. That would be odd as using ones apple ID to log into a Mac remotely was new with Lion, and I had the same problem with our SnowLeopard server - which I remote into much more frequently.
Probably didn't hurt though to reboot the entire network... -
some times my internet connection will say it has timed out and I can not connect. but my friends mac never has a problem. How can I fix this?
Just confirming, when you have the trouble, the wifi icon is grayed-out or has all bars showing? I believe you are saying that is is grayed-out - not connected to your wireless router.
I have a Mini that started to lose connection to the Internet after the 10.7.3 update but still showed the wireless as connected. If I pinged the wireless router, I would get a quarter of the packets failing to return. The router was a Netgear that supported 802.11N connections. As a test, I set it to 802.11G (54MBps) maximum and the Mini worked fine for a week - no dropouts. And for the other devices that did support 802.11N, while there was a noticeable delay with downloads and pages loading, they still worked.
As another test, I changed the Netgear router to a Billion 802.11N model and the Mini has not had a problems since. (It is still using 802.11g). So it could be your router that is causing trouble for your Mac.
Have a look at some of the More Like This postings in the right column. There has been a number of Mac owners experiencing wifi connection issues and some very good suggestions as to how to resolve their issue. -
Cannot Connect to google on iPad or Mac. Mini says I do not have a certificate. What is the problem and how can I fix it.
I have Maverick on my iMac and haven't noticed any connection or any other issues. Also, that won't have any affect on your mobile devices.
Most likely an issue with your router or isp.
Try rebooting your modem and router (if applicable) by unplugging it for 5-10min.
At the same time, reboot mac and both/all mobile devices by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen. -
How can I get airport activated?
Software Versions:
Menu Extra: 6.2.2 (622.2)
configd plug-in: 6.2.5 (625.6)
System Profiler: 6.0.1 (601.1)
Network Preference: 6.2.2 (622.2)
AirPort Utility: 5.5.3 (553.20)
IO80211 Family: 3.2 (320.1)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x8C)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.42.4)
Locale: FCC
Country Code: X0
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Off I check it ON in airport utility and Nothing happens, airport stays OFF
My other mac computers in home still have wireless contact with my network.You do realize you don't turn on Airport on your MacBook Pro with Airport Utility??? You actually turn it on on the menu bar. There should be an icon that looks like a V with a semicircle on top. Click on that, and turn WiFi on. Or you can go into System Preferences>Network, click on Wi-Fi on the left hand side, then turn on Wi-Fi.
-
I can not connect via SSH to a MacBook (the internal home network)
Hi all! There is an internal home network of three computers and Wi-Fi router. On the router and the computers with Win7 via SSH I go (with a MacBook) without problems, but on a MacBook with any other computer can not enter via SSH. What could be wrong?
ssh -v -v -v [email protected]
Do this once for a working system,
And once for a broken system.
Compare the output and see what is says where the broken system changes radically from the working system.
Also on the destination system look in the /var/log/secure.log file for sshd entries to see if the destination system is rejecting your connection and for what reason.
It is possible on the destination system to get even more information by changing the /etc/sshd_config file entry
#LogLevel INFO
to
LogLevel DEBUG3
then issue the command
sudo kill -HUP `/var/run/sshd.pid` # reload sshd configuration parameters -
IMac 10.7 can not connect to an old Mac with Os 9 classic
Hi, hope somebody can help me with this issue
My company bought a brand new IMac 10.7 Osx an I need to make a conection from this machine to an old G3 with Mac Os 9 classic system where all my files are stored and even my Rip software resides.
When I try to make the conection a message appears telling me ¨the system is not supported¨ or something like that, so what can I do? Any way to make the conection?
No, no way to take my old Mac to the trash, my rip software only works on Classic 9 system...
Thanks in advance for any helpConnecting via IP versus system name will not solve the problem, nor will me "finding a newer solution" - I already have a Mac OS 10.7 system and as of today, there is NOTHING newer (that will change possibly in the up-coming week). I may look at the "work--round" again though. I checked the link but did not understand it on my first pass. It appeared to be a modification process executed on the 10.7 system to enable some "old and insecure behavior".
The 10.5 based tower I have does not provide built-in hardware support for the IDE disks either, so I cannot just move them to it. Booting the old system in target mode means physically relocating it into the immediate proximitiy of the 10.7 system, or vice versa AND it does not provide access to all of the hard disks installed. It only provides access to the boot disk in many cases. Not to mention, such relocation is not always convienient for the period of time necessary to move the files and then check the integrity to the relocated versions. I may however attempt to install an NFS server if I can still find one and connect that way.
There is something wrong with the system hardware too. It will not boot into 10.x from an external drive or from the DVD. When all memory modules are installed, the system indicates a memory test errorr, and it does NOT move when the order of modules is changed. Therefore I cannot install a more recent version of the OS and attempt to get the disks seen over the network that way.
Message was edited by: Daniel O\'Leary to add additional information on things I have tried but yielded unsuccessful results. -
TimeMachine Not Connecting On One Of Macs...
Hello,
I'm wondering if someone can help me. I have a time capsule that used to work until a few days ago. Let me give the way the system is setup.
I have an iMac (10.6.4, 2GHz Intel Core Duo, 2GB RAM) and a MacBook Pro (10.6.4, 2.4GHz Intel Core Duo, 2GB Ram).
I had an external hard drive die on me for the MacBook Pro. It was after that I tried to make sure my remaining external drive was backed up. I went into the time machine options in the system preferences and removed the exclusion for my existing external HD. Since then, little has worked.
My iMac just hangs on "Preparing backup..." When I got into the console, I get these messages:
Aug 3 11:11:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
Aug 3 11:12:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
Aug 3 11:13:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
Aug 3 11:14:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
Aug 3 11:15:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
To try to restore the previous settings, I've added the external drive on my MacBook to the excluded list and that seems to be connecting ok now but the iMac isn't.
I've also tried forcing a restart of the time machine and that did nothing. Additionally, I've tried to change the destination of timemachine briefly and then change it back to the timecapsule. That did nothing.
Thoughts?
Thanks in advance!
TimFCNewbie wrote:
Aug 3 11:11:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
Aug 3 11:12:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
Aug 3 11:13:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
Aug 3 11:14:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
Aug 3 11:15:38 Macintosh com.apple.backupd[1885]: Waiting for index to be ready (100)
That's a problem with your backups, the Time Capsule, it's internal HD, or communicating with it.
Start by repairing the backups for the Pro, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of the +Time Machine+ forum). That will take a long time, so be sure to connect via Ethernet, as it will be 2-3 times faster.
If that doesn't help, see #D2 there. -
I have tried all the troubleshooting tips from the website and we still can not connect our ipad or mac book......it is so frustrating...........
Have you tried posting a question in the correct forum?
Appletv one instead of the iPad one? -
Hello,
I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
thanks,Hello:
You will need to delete the keyboard from the other Mac. Simply disconnecting it leaves it still paired with the first Mac.
Barry -
I can not connect to my gmail on my Mac, also can't get to google athough I can get to my yahoo mail and some other sites Help!
Routing gmail through Mail.app:
imap-http://mail.google.com/support/bin/answer.py?answer=81379&topic=12814
pop-http://mail.google.com/support/bin/answer.py?answer=13275&topic=12810
More up-to-date advice here:
http://www.macworld.com/article/2033842/make-mail-and-gmail-play-nice.html#tk.nl _mwhelp
Note that you lose privacy when using Gmail (and Yahoo):
Gmail and Yahoo both scan users' emails. They do algorithmic analysis of your email messages, targeting ads that relate to the content of your messages. Defenders point out that "they", are not people, but machines. And they argue that it is a harmless way of making advertising relevant to users and raising revenues.
Others might say that whether a machine or a human is doing the work, the potential for a privacy breach is there. -
Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
0 66 1 0 11:06AM ?? 0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
74 225 66 0 11:06AM ?? 0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501 952 947 0 3:52PM ttys000 0:00.00 grep mysql
Please help!!Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating. -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'
I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'
-
I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com
Maybe you are looking for
-
Multiple apple ID/Icloud accounts
Hello, I would like some advice about whether or not this is possible. My wife and I share a macbook pro and an iPad and we both have our own iPhones. We want to set up a joint apple id so that it has its own iCloud drive. This would be so we could a
-
FI Experts, client do not have a clearing accoutn set-up for outgoign checks, therefore I am reconciling account manually first, before I introduce them to teh clearing accoutn. I updated the encashment field for all outstanding checks, now I need t
-
Fp-1600 can't see i/o modules.
I was able to configure the IP address of the fp-1600. The 'status' led on the fp-1600 went off. However, when the 'find devices' was pressed, it could not see any i/o modules in the same rail. The 'ready' led on all i/o modules are off. I've tried r
-
A download of Acrobat calls for me to close the plug-in container. How do I do this?
I am trying to install an update to Adobe Reader. The installation wizard asks me to close the plugin container of Firefox
-
Error while loading JS libraries for UI5 and I5 Grid together
Hello Experts, I am trying to load JavaScript libaries for UI5 (OpenUI5 SDK) and I5 Grid (from bootstrap.js). My requirement is to create UI5 as well as I5 Chart/Grid components in the IRPT pages. Development environment is MII 14.0 sp04 . I have add