Can not connect to printer and internet at the same time

I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

The only way to print and use the internet (or university network) at the same time is to do one of the following:
(1) Connect the printer via USB to your computer.
(2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
The AEBS can NOT wirelessly join the network.

Similar Messages

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

Is the HP on the airprint list?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

I can not establish more then 1 call at the same time

Hi,
I have SPA9000 with four active accounts. I can not establish more then 1 call at the same time. Accounts are all in registered state. The field in SIP tab, Default Group Line:, is by default: 1,2,3,4 which means if line 1 is busy try the next one in the order ( in this case number 2). But this is not happening. It always tries to dial out with the first line (account). There is no problem with the provider and I don't want to specify groups of userID's and to assign them special line for dialing out.( by the way in this way it is possible to establish more parallel calls, but then each user will always have to dial thru specific line only). Please help me to find out if the SPA is faulty or give me some workaround, so that when I try to make a call , if one line is busy to dial out thru the next available.
P.S. I suspect that SPA9000 does not notice when the line is busy or not. Maybe there is some issue with the Control Timer Values (sec) on Regional tab.
Thanks,

no it can only be one person at a time

Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

Hi everyone,
We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
We activate both, but the SC is not returned in SoCo.
Thanks,
Ivá

Hi Ivan
You can use both badi to change srm standard behavior.
but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
for example
shopping cart item has follow on document created as a contract But you need to create a another shopping cart to create a Purchase order w.r.t that contract .
Once follow on documents are created sourcing flag will be removed .- rule
BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
BBP_DETERMINE_LOGSYS - Determine your logical system.
Muthuraman

"you can not use multiple instance of Program at the same time"

Hello @ all,
I have a Problem, after the installing from Acrobat Testversion and acrobat reader in version in "all Combination" 8 an 9.
I get this misstake information "you can not use multiple instance of Program at the same time" if I want open more then 1 .pdf.
If I have no pdf open, but acrobat/reader so i can´t open with the same Misstake.
I have deinstalled and installed, Allways I bekame the same information. I tryed all things to clean and know i don`t know forward.
Important: by Drag an Drop in the Acrobat Reader it is going, but by direct click on the pdf i get mistake.
Maybe, you know what I can do!
Thanks for help!

Installation of both Acrobat and Reader in the same Windows machine is not advisable. If I were you, I would remove both completely and then reinstall the one you want to keep.

Can I use both cs and cc at the same time?

Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
Regards
Kasper

Having problems connecting two ipads to Internet at the same time

Hi everyone, new to here, would love any advise please. We have just received a new router from talktalk, DSL3680. The previous router had broken.
We are having trouble trying to connect to the Internet with my wife's iPad and mine at the same time. Which ever pad gets on the net first blocks out the other one.
One iPad is iPad 2, the other iPad 4th generation. They have different device names, but run off the same apple Id account. Never had any trouble with old router just with the new one. Both have up to date software. Regards Wayne

Make sure iPad is using DHCP and not Static IP.
http://i1224.photobucket.com/albums/ee374/Diavonex/d31cb33f5d6393546fc3f31487058 f6e_zps6467f438.jpg

Can i use Firewire 800 and 400 at the same time?

I have a HD connected to my 800 port works fine and a GL-2 camera on the 400 and final cut pro won't see the camera. Can I have 2 devices hooked up at the same time?

Yes. But you did not say whether the camera works alone or not at all. In the latter case it could be the camera isn't compatible.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Why can't I run Safari and Skype at the same time without making my computer freeze up?

I can't believe I can't run Safari and Skype at the same time without my computer freezing up, it's a MacBook Pro with Mac OS 10.6.8 and it has an Intel Core 2 Duo CPU with 2.2 Ghz and 2 Gb of RAM. Is this a hardware problem or a software problem?

I haven't gone to the trouble of actually testing to see which uses more CPU power, but Firefox has been faster than Safari on every Mac I've ever owned.
To see CPU usage by process, open the terminal (in Utilities) and enter 'top' at the command line. You might have to expand the window as processes don't appear in any logical order.
It could also be hardware-related: I have late 2009 mini with similar specs and it pinwheels easily.

No Airtunes and Internet at the same time

Hello,
I'm using an iPod Hi-Fi in combination with an Airport Express basestation.
My internet connextion goes through PPPoE. So I use the Airport Express in "Bridge mode" But...
iTunes won't find the (wireless) iPod Hi-Fi when PPPoE is winked "on" in the airport settings. When I wink PPPoE "off", iTunes do find the iPod Hi-Fi.
But without PPPoE I don't have an internet connexion.
So I can't use the internet and listen to Airtunes at the same time.
Does anyone have a solution?
Thanks!
Greetings,
Jarchall

I'd suspect that the Bonjour would not work properly if the wireless thinks the next hop down the wireless trail is the open internet instead of the Airport Express. PPPoE basically makes a tunnel from your computer to the ISP server. The PPPoE packets are wrapped in a special transport package the express probably can't get into unless there is some future specialized firmware update.
Unless you have some burning need for bridge mode I would configure the Airport Express to connect via PPPoE with the setup assistant.
-Alex

Can my ipad use wifi and bluetooth at the same time?

Hi
I can stream radio via wifi radio apps and play through earphones. I can connect to my bluetooth speaker and play music stored on my ipad ok.
When I connect up to my bluetooth speaker and try to stream the radio app it plays for a couple of seconds then stops for 20 seconds then plays for 2 seconds and carries on start, stop, start (I guess it's buffering or something?).
Is it not possible to listen to a radio app and stream it to a bluetooth speaker at the same time?
Any suggestions welcome

Thanks for confirming it should work man.
A quick check of the talktalk forum and it's my talktalk D-link 2780 router. It's a known problem.
It all works ok on next doors router so Off to PC World for a decent router.
Thanks again.

Why can't i use wifi and bluetooth at the same time?

I recently bought a Philips docking speaker that has bluetooth connectivity for streaming music wirelessly from my Ipod Touch. The bluetooth/speaker works great, but, my Touch won't allow me to be online AND use the bluetooth at the same time. This is really annoying when you want to listen to music and check your emails. Am I doing something wrong?? Any help would be gratefully received.

I can use by BT headphones while my iPod is connected to the internet via wifi with no problems. I am uncertain how the Philips' system works. Does it have its own BT transmitter/receiver or doe it use the iPods to stream to its speaker?

Can AE support wireless 'g' and 'n' at the same time?

Do I need a router or can I just plug an ethernet cable from the modem into an airport express and be ready to go (essentially making the Airport Express my router)?
Also, I'll have two laptop PC's connected to it. One has a 802.11g card, the other has an 802.11n card.
Can both 'g' and 'n' be used at the same time or will I be limited by the slowest card (in this case, the 'g')?

Welcome to the discussion area!
+Do I need a router or can I just plug an ethernet cable from the modem into an airport express and be ready to go (essentially making the Airport Express my router)?+
The AirPort Express is a wireless router that will support up to 10 wireless connections simultaneously when connected to a modem.
+Can both 'g' and 'n' be used at the same time or will I be limited by the slowest card (in this case, the 'g')?+
The default wireless mode of the AirPort Express will support "b", "g" and "n" clients, so "n" devices will connect at faster "n" speeds while "g" devices connect at that speed. The "g" device may tend to slow down the "n" device a bit depending on how much data is being transferred from the AirPort Express to the 'g" device at any given time. When the "g" device is not active on the network, "n" devices will communicate at full "n" level speeds.

Using Aiport Express and internet at the same time?

I was just wondering if anyone could offer any advice on this subject please?
I've got a Macbook running through a wireless BT ADSL modem. I have also managed to connect the Macbook to my Aiport Express to allow me to wirelessly pipe iTunes through my stereo. I am aware that you cannot run both at once (i.e pipe music and browse the web) due to the Macbook being able to be only connected to one wireless network at a time.
My questions is whether there is anyway round this? If I bought an Aiport Extreme base station, connected that to my wireless router and used the Airport Extreme base station for the wireless connection would I be able to add the Aiport Express to that wireless network and subsequently have the internet and the Aiport Express running on the same wireless network - hence being able to pipe the music wirelessly and also browse the web at the same time?
Or is there another way round it?
Any info anyone could offer would be a great help
Thanks in advance
James

Ahh am I right in thinking this is the way to do it?
http://docs.info.apple.com/article.html?artnum=302153
Thanks
James

Can not connect to printer and internet at the same time

Similar Messages

Maybe you are looking for