Can not connect to printer

My Mac (running OS X 10.9.1) will NOT connect (find) my HP C410 printer when I send a print job! I have re-booted and un-installed/re-installed everything multiple times. I can connect to the scanner and scan but I cannot print! Any help would be greatly appreciated.
I have always printed with this printer, network, mac system with NO problems. I do not know why I suddenly cannot print!.
Regards,
Jon

Thanks MACkeral,
Reset print system and NO success! I have literally tried all I can think of.
Verified update software/driver, etc.
Reset: Printer, Mac (multiple times), as well as wireless modem.
un-installed and re-installed printer multiple times: Most the time the mac will not even see the printer until I go and re-boot it or take it on/off network. Then once I have the mac recognize and install/setup printer (and all looks good). I send a print job and it immediately goes into que and just sits there, and then get the error message - "Printer is not connected" (in print que window). Funny thing is if I leave it and walk-away. Hours or days later I will find my print job sitting on the printer!
Any help much appreciated! Very frustrating for a new Mac person.
Best regards,
Jon

Similar Messages

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

Is the HP on the airprint list?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

Can not connect to printer and internet at the same time

I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

The only way to print and use the internet (or university network) at the same time is to do one of the following:
(1) Connect the printer via USB to your computer.
(2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
The AEBS can NOT wirelessly join the network.

Can not connect my wireless printer to the new router.

Can not connect my wireless printer to the new router.

Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist

Hi I can not get my printer to connect to the internet.

Hi
I can not get my printer to connect to the internet. it is connected to my network according to wifi test printout but my computer can not find it.
When I try to download apps directly from the printer it says that it is not connected to the internet.
I have an airport extreme + 3 airport express a macbook pro and printer is an HP 7510e
I see the printer on the first page in the airport utility when I click on my airport extreme.so it is online but nothing happens when I try to print.
Please help me

Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks

HT4356 I have a cannon mg3120 air printer and it is connected to my wifi but my iPad can not find a printer, what can I do

I have a cannon mg3120 air printer and it is connected to my wifi but my iPad can not find a printer, what can I do

1. Reboot iPad
2. Reboot router

HT4970 I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful

I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful
Max Cavichini
Medical Legal Expert
Problem ipad and i phone

This has never been a feature of iphone,ipod touch or ipad.

Laserjet Pro 400 MFP M425DN Can not connect to HP Web Services

I have a Laserjet Pro 400 MFP M425DN printer on a network running windows 7 and we Can not connect to HP Web Services. When we use the display on the menu it comes back with error "Internal Processing error, try again or check firmware update" We installed the new firmware but still get the same message. IF type in our printers IP address into our browser we get the info on our printer but if we go to the HP web services tap and click enable it trys but come back with a "connection error"
Any ideas?
Thanks
Paul

I just updated my Firmware on this printer today to the latest version dated May 3 2013 and Web Services
worked. Had the same type of problem you had for months and had worked with HP but could never get
Web Services to work at my location with my Modem/Router.
Had tried at other locations and it would work with the old Firmware. But for some reason it did not at my
location with the Modem/Router I was using.
Again the latest Firmware fixed it. I tried all the other solutions that I had found on the internet and non of them worked.

Can't connect any printer to Mountain Lion!

Hi,
I have some problems connecting and using my HP1006 printer with my new Macbook Pro. I've bought it a month ago, it is 15' MacBookPro with retina, Lion 10.7 was preinstaled on it. My HP worked with my mac like a charm. Lately I upgraded to Mountain Lion and after that I can not connetct my printer at all! MB simply can not see and even detect it. . I've already checked my cabel with another computer - it works. My usb are also ok, my camera and flash cards detects perfectly.
I've tried everything:
- I instaled new drivers from apple, (from 8 August) but this didnt help.
- I renewed disk permissions
- I even tried to connect another new printer from the store.
Please advise how can I solve this problem
Thank you

In certain cases, automatic discovery does not work. In this case you will need to type in the IP address of the printer. You can get this information in the "Print Configuration" menu on the front panel. 1) Apple Symbol/System Preferences/Printers and Scanners2) Click "+" symbol (Add)3) Choose "IP"4) Type in ip address, Protocol: HP Jetdirect - Socket5) Fill in the name and location per your preference. 6) The "Use:" field should be filled in with the correct choice. If not, use the "Select Software" setting and choose "Laserjet 4000 Series" Eric

My imac running lion can not connect to a Windows PC on my network

My imac runing lion 10.7 can not connect to my Windows 7 pc on my network. When i select connect to server, I can see the windows computer but when i try to connect, i get the error message:
Connection failed. There was a problem connecting to the server. Ther server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection and try again.
I entered smb:// computer name and I tried smb://IP address. Neither would connect.
I am able to connect to the imac from my Window PC and access files but not I can not connect my iMac to the Windows PC.
I am trying to connect the two computers so that I can use a printer that is attached to the Windows 7 pc.
When I first downl;oaded and installed Lion, I was able to connect to the Windows 7 pc and use the printer attached to it.
I have tried 5 or 6 different suggestions to no avail. Both computers are up to date and the printer drivers are up to date.
Please let me know if there is a solution.

Be sure to make the network Workgroup name on the Mac and Windows boxes the same.
On the Mac it is in System Preferences, Network Preferences, Advanced, WINS
On the Windows machine check in the Control Panel where you will also find the Computer name listed. I don't have my PC running right now, so I am not sure exactly where it is. Only assign a Workgroup, do not create a Domain.
You can also search in Windows for Workgroup.
I can link/network Lion to Win7 and vice versa without any problems.

I can not get my printer to print

Please if you can assist me, I can not get my printer to print. it is wireless connected to my labtop computer. please help

Please describe your problem with way more detail.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can not add network printer

Hi.
I installed HP Laserjet Pro P1102 on win 7, I checked it for sharing. trying to add it on winxp on same router but is not detected. I d/led file The HP Home Network Diagnostic Utility application "HPHNDU.exe" on pc that printer is attached to, can not find network printer.
Please help - Thanks.
Sinan

It might be possible to do this with an Airport Express. Your AE joins the network and the printer is connected to the AE. If you can get it cheap (g speed is OK).

Can not connect outside of Lan to with rtsp PVC2300

I have the following cameras set up at my office
1 - PVC2300
2 - WVC54GC
3 - AXIS 225FD
I have a BEFSR81 Router
I have a computer on Windows XP running the surv software to record. Everything with that is good.
I also have 2 desktops.
I have been playing around with the rtsp feed with the pvc2300, but have run into a few problems.
1(a). I can not connect outside of the LAN with RTSP with either the VLC player or quicktime. It connects and asks for a password and then just hangs.
The PVC 2300 local address is 192.168.1.102 with ports 554, 5000-5010, and 6970-6999 forwarded on the router. What am I missing?
1(b) I can successfully connect with my blackberry bold, although when I try to change the default port (554) to something else (I would like to RTSP my the AXIS camera as well, so I will need a different port) it connects on my bold, but then says server is unresponsive. What am I missing here?
2. The voice with the PVC 2300 using http outside of the LAN (internet) lags quite baddly and is choppy. This happens without fail when I have all 4 cameras running, which I understand is upload bandwidth problem. But it also happens when I connect to just the PVC2300. I do have a connection to all 4 cameras inside the LAN to the XP running the surv software, but that is it. Is the my router acting buggy? I have unplugged the router for 5 sec, and it fixed it for a while, but it always comes back. I have donwloaded the latest firmware for the router and PVC 2300 and that didnt seem ot fix it either. Suggestions?
3. This is more of a question. I know the mobile streaming of the PVC 2300 does not include voice. Is there an app or way that I can just get it to my Blackberry. Even if I didnt get the video, voice is sometimes more important to me.
I hope Ive been clear enough in my description, Im very self taught (google is amazing), but I am in no way a techy.
Thank you in advace for your help.
Colin

Glad to hear you are successfully using the SWVMS16. That program is really cool and useful. I just cant tell you how that model of Linksys Router can work for you here (that is not a model we support on this community as its not small business)
Regarding RTSP access, are you also including the mobile.sdp in the URL?
RTSP:///mobile.sdp I noticed in the camera GUI with the newer firmware, you can specify an access code under mobile settings after checking the enable mobile streaming box. That word may be what you have to include, so check that too...
Try this locally first and then remotely is the easiest way to see if you got it right, then it just becomes a routing or firewall issue to figure out.
But your forwarded ports look right and should be opened.
Under advanced settings, you can define an alternate HTTP, HTTPS or RTSP port

Can not connect computer to Cisco Connect -EA3500

Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.

Reading the manual it says the username is blank, password 'admin'.

Can not connect to Image Browser

Can not connect to Image Browser. Try to open again but no results.

Hi garyrandall,
I'm sorry to hear of the difficulty you've encountered with the transfer of images from your Canon camera.
Please reply with the Camera model you're using and the operating system on your computer.
Please include any error messages you receive.
We look forward to hearing from you!
Richard
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can not connect to printer

Similar Messages

Maybe you are looking for