Can not connect to wifi away from home

i have no problem connecting to wifi at home...when i visit other locations my itouch will not connect. i have tried reset the network settings. my itouch shows the ip setting and other information for connection but it will not connect.

It might be that you have not acknowledged the network's agreement to use it. If you're using OS 3.0 or later on your Touch you should be able to open Safari and be re-directed to the network's Terms of Use page, then you should have access once you agree. If you're using 1.x or 2.x OS then sometimes it is harder to "see" this Terms of Use to acknowledge.
If that doesn't help, you can try editing the DNS that the network is giving you. You can try 208.67.222.222 and 208.67.220.220 which are the OpenDNS addresses. Sometimes that helps you get access in case the network is feeding your Touch incorrect DNS addresses. OpenDNS is free, safe, and pretty cool to implement on your own home network since it allows you to control content and monitor usage.

Similar Messages

  • I can not connect to wifi using iphone 4s

    I can not connect to wifi using iphone 4s

    If this is you home wifi try resetting the router.  Turn if off at the wall wait a minute and turn it back on.  Are you sure you have the right password?

  • Iphone 4s can not connect to wifi

    I have an iphone 4s can not connected to wifi even it was working the day before problem.

    Power off your phone, unplug the router and modem for 2-3 minutes, then plug them back in, power your phone on, and try to reconnect.

  • IPhone can not connect to wifi

    Since I downloaded IOS 7 to my iphone 4S, my battery life is greatly diminished and I can not connect to wifi. I reset my systems, but still the wifi button is grayed out. Suggestions ?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Can no longer access ESPN3 away from home

    After setting up the remote access feature, I used to be able to access espn3 away from home, but can no longer do so.  When I select an event to watch, I see the prompt to select internet service provider and then continue.  I then receive a login error message from AT&T.  I just tried the same thing using my wife's laptop and it works just fine, so there is something not quite right on my computer.  Any ideas of what to look for to fix this? 
    Thanks in advance

    Bump.....still looking for some help if anyone has some ideas.  Even after the upgrade to Lion, still have the same problem. 

  • Can't send mail when away from home

    10.5.2
    I can't get my MacBook Pro to send email when I'm away from home but the connection doctor says it is connected to all of the smtp servers in my mail accounts.
    Any help will be greatly appreciated.

    Most, if not all ISPs, block the use of SMTP servers that are outside of their network (or not provided by the ISP being used for your internet connection) on Port 25. Some ISPs allow the use of an authenticated SMTP server only that is outside of their network, but some block all available ports that can be used with an SMTP server that is outside of their network.
    These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain.
    Earthlink has an authenticated SMTP server, as does a .Mac account, so you should be able to send messages with your Earthlink and .Mac accounts when connected to different ISPs. If not and you are using 25 for the SMTP server port for these SMTP servers, try using 587 for the SMTP server port instead for each.
    You can only use the .Mac authenticated SMTP server to send messages with a .Mac account, but it should be possible to use Earthlink's authenticated SMTP server to send messages with any account.
    If the ISP you are using for your internet connection is very restrictive in this regard, there isn't much you can do except for contacting the ISP being used for their requirement when using an SMTP server that is outside of their network, or send via webmail access for the account using a browser.

  • After updating to 10.8.1 i can not connect to wifi   no hardware installed , it says

    When I installed the update to 10.8.1 there comes a message that there was a problem by installing.
    Now i can not connect to a wifi network, when i click on the wifi at the bottom
    No hardware is installed
    Why is there no hardware installed?
    Under 10.7 all was fine

    I have MacBook unibody late 2008 with OS X Mountain Lion on board. Wifi stopped working suddenly and I spent about four terrible hours to solve a problem.
    Actually, none of mentioned and googled advices helped me out to solve this issue with 'WiFi: No Hardware installed'.
    Except one thing: using the wifi kext from the Snow Leopard. You may use utility and kext from here: http://rys.sommefeldt.com/2011/09/04/osx-lion-wifi.html
    I hope, this can help.

  • I've managed to get back to Pages 4.3 and delete the downgrade Pages 5, which makes a total mess of any doc prepared with it,  but how to I get back to the old version of Pages on my iPad so that I can work while I am away from home.

    I've managed to get back to Pages 4.3 on my iMac and delete the downgrade Pages 5, which makes a total mess of photo-rich documents prepared with Facing Pages (most of mine),  but how to I get back to the old version of Pages on my iPad so that I can work on sections away from home. At least on my old PC, Word maintained compatability with old versions. Beginning to regret having switched.

    Thanks for your help. What is really irritating is that Apple give a big hurray about what they have added as "new"  in Pages 5 (most of it pretty useless) without telling you of the myriad things they have deleted.  If they had shown the list your gave the link to, I doubt may regular users would risked going to Mavericks with its auto upgrade. My partner got the message in time and is sticking with the earlier operating systems and Pages on Mac and iPad. Lucky girl.
    I have found a way to use my iPad to add chapters written while on the move to reports on my iMac Pages 4.3. If I write it on the new Pages on the iMac (don't seem to be able to revert there), the send the report as an email in WORD format (not Pages) and download it in the Text Editor, then cut and paste into the story on the iMac. Hardly elegant but it works.

  • Can not connect to wifi to configure

    I can not connect to home wifi to configure. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • How to connect to tc away from home

    Actually it was working fine until i upgrade to lion and now my time capslue which i also use as server do not show up in my finder any longer and can not connect 

    Glad I can help. Feel free to click "This Helped Me"
    1. Plug your iPad into the computer with the cord that came in the iPad box.
    2. Open iTunes on CPU.
    3. Hold down home button (bottom of screen) + sleep/wake button (top right of iPad). When screen goes blank keep holding home button, but let go of the sleep/wake button. Wait until iTunes gives you a prompt like "iTunes has discovered an iPad in recovery mode..."
    4. Click "ok" on the prompt.
    5. Click "Restore iPad"
    6. Your iPad will show a progress bar and then reboot (at least once).
    You are ready to begin using your iPad again when your iPad shows the welcome screen (gray screen with 'welcome' written in many languages). You might have to press the sleep/wake button to get the screen to show up.
    Sync your content back onto your device when you get home.
    You might want to use this video for help.
    All the best!

  • Can i use it at away from home

    can we use apple tv away from home

    Yes if you have a network.  Say you have internet access elswhere but you're computer is home.  You could still watch netflix and rent movies and tv shows for example.  Or say you have your content on your laptop, iPhone or iPad and have that with you - you'd have access to that on your Apple TV as well regarless of where you are - as long as you have a network.

  • I can not connect to wifi with router WRT54G2 v1 with Windows 7

    Hi everyone: I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi.
     I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.
    I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.
    I Try chatting with Cisco support and was told he was no longer under warranty ....
    Can you tell me how to solve this problem ???
    Thank you for your help !!!
    Solved!
    Go to Solution.

    Sure, disable security on the router completely for now.  Now try to connect with no security.  Once done and verified  go back and add  security back on of WPA2-AES with a new password and try again.

  • Can not connect to wifi-network

    I have a iphone 4 that I managed to lose in the toilet. it is relatively in good condition,but can not connect to wi-fi networks. seems as if it is unable to receive signals. is there anything I can do to fix it?
    and I have no dial tone when I call. what can I do?

    Apple has an out of warranty replacement program for phone's like yours, cost in the US is $199. That would be your best course of action.

  • Can not connect to WiFi on iMac... just started

    I have a preferred network t hat all of a sudden I can not connect to on my iMac. The network diagnostics does not even bring up the list of networks. I have 2 other laptops, an iPod touch and another iMac on the network using wi-fi and they are all fine. If Network Diagnostics does not work...how do I troubleshoot?

    I would turn Airport off and then turn it back on. You should see your network and be able to log back in. There's also been a number of OS X updates - you might want to get your system up to date as there have been multiple Airport updates.
    The other thing you might want to try is resetting (power-cycling) your router.

  • Can not connect to iTune Store from 1 user only.

    I have 2 user accounts on this computer. one is an admin account it connects fine. The other account will not connect. It says accessing iTune Store but nothing happens. One time it came up with "can not connect error (-50)"
    Can anyone help me!

    Well I got the iTunes store working. Not sure if this will work for you or not.
    I logged in with my administrator account, went into System Preferences, selected Accounts, made the user that could not access the iTunes Store an administrator. I then logged in as that user, launched iTunes, and was able to connect to the iTunes Store (though it did seem to take an excessive amount of time the first time it connected). I shutdown iTunes, logged out of that user, went back into preferences, turned off Administrator rights for that user, and turned on any parental controls that were necessary.
    I then logged in as the user again and iTunes was able to connect to the iTunes Store.
    I was then able to sync his iPod Touch and download the 2.0 update without any problems.
    Hope this works for you.
    david.

Maybe you are looking for

  • How can I implement a do loop in Test Stand

    I'm trying to create a looping step that will execute at least one time like a traditional do loop in a text based language. Can it be done using the loping feature of a single step, or do I have to execute the step, and loop using a goto step with a

  • Automatic alignment of fillable fields?

    I am making a long form and I want to be able to have the option of having the beginning of each fillable box on each line to be able to start at different distances from the beginning of the line ie questions are of varying length, as I am trying to

  • XI Error - Integration Scenario Configurator

    When running Step 2 - Assign Services, I choose my Business Service and then Click on Assign, I receive the following error: An assignment to a business service must be defined for each business system service. Unassigned business system services exi

  • Transitional to Strict, transition...

    I'm wanting to step away from HTML 4.01 Transitional DOCTYPE to HTML 4.01 Strict DOCTYPE. When I have W3C validate by suppressing my Transitional DOCTYPE and inserting a Strict DOCTYPE - I notice some errors which I'm not fimiliar with how to handle

  • Execution Time of Mapping

    Hi All, While we are executing Mapping multiple times through Control Centre in Local server. The first execution time of the mapping is taking less time than the second/third execution time of the same mapping. Thanks in Advance...