Can not connect to WiFi on iMac... just started

I have a preferred network t hat all of a sudden I can not connect to on my iMac. The network diagnostics does not even bring up the list of networks. I have 2 other laptops, an iPod touch and another iMac on the network using wi-fi and they are all fine. If Network Diagnostics does not work...how do I troubleshoot?

I would turn Airport off and then turn it back on. You should see your network and be able to log back in. There's also been a number of OS X updates - you might want to get your system up to date as there have been multiple Airport updates.
The other thing you might want to try is resetting (power-cycling) your router.

Similar Messages

  • Iphone 4s can not connect to wifi

    I have an iphone 4s can not connected to wifi even it was working the day before problem.

    Power off your phone, unplug the router and modem for 2-3 minutes, then plug them back in, power your phone on, and try to reconnect.

  • IPhone can not connect to wifi

    Since I downloaded IOS 7 to my iphone 4S, my battery life is greatly diminished and I can not connect to wifi. I reset my systems, but still the wifi button is grayed out. Suggestions ?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • I can not connect to wifi using iphone 4s

    I can not connect to wifi using iphone 4s

    If this is you home wifi try resetting the router.  Turn if off at the wall wait a minute and turn it back on.  Are you sure you have the right password?

  • After updating to 10.8.1 i can not connect to wifi   no hardware installed , it says

    When I installed the update to 10.8.1 there comes a message that there was a problem by installing.
    Now i can not connect to a wifi network, when i click on the wifi at the bottom
    No hardware is installed
    Why is there no hardware installed?
    Under 10.7 all was fine

    I have MacBook unibody late 2008 with OS X Mountain Lion on board. Wifi stopped working suddenly and I spent about four terrible hours to solve a problem.
    Actually, none of mentioned and googled advices helped me out to solve this issue with 'WiFi: No Hardware installed'.
    Except one thing: using the wifi kext from the Snow Leopard. You may use utility and kext from here: http://rys.sommefeldt.com/2011/09/04/osx-lion-wifi.html
    I hope, this can help.

  • I can not connect to wifi with router WRT54G2 v1 with Windows 7

    Hi everyone: I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi.
     I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.
    I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.
    I Try chatting with Cisco support and was told he was no longer under warranty ....
    Can you tell me how to solve this problem ???
    Thank you for your help !!!
    Solved!
    Go to Solution.

    Sure, disable security on the router completely for now.  Now try to connect with no security.  Once done and verified  go back and add  security back on of WPA2-AES with a new password and try again.

  • Can not connect to wifi to configure

    I can not connect to home wifi to configure. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Can not connect to wifi-network

    I have a iphone 4 that I managed to lose in the toilet. it is relatively in good condition,but can not connect to wi-fi networks. seems as if it is unable to receive signals. is there anything I can do to fix it?
    and I have no dial tone when I call. what can I do?

    Apple has an out of warranty replacement program for phone's like yours, cost in the US is $199. That would be your best course of action.

  • My imac(2.8 ghz core i5) can not connect a wifi. It's always show connection timeout.

    Before i found this problem my imac is in sleep mode. when i finish my lunch i come back and see a black screen come from top of screen and more language is show.In english it is written that I want to restart my mac i must press power button. After i restart my mac. I have a problem about wifi. but lan it's ok. and my iphone can connect to wifi normally.

    Interval Since Last Panic Report:  192943 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    9431E442-7F42-4AF3-A5E8-869E231E6E77
    Sat Oct 15 09:57:29 2011
    panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00550759, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x0c44602b, CR3: 0x00100000, CR4: 0x00000668
    EAX: 0x0c445f27, EBX: 0x08e10040, ECX: 0x0000053d, EDX: 0x08388c80
    CR2: 0x0c44602b, EBP: 0x575e3f28, ESI: 0x0bf6a1c0, EDI: 0x08388620
    EFL: 0x00010202, EIP: 0x00550759, CS:  0x00000008, DS:  0x0bf60010
    Error code: 0x00000000
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x575e3d28 : 0x21b837 (0x5dd7fc 0x575e3d5c 0x223ce1 0x0)
    0x575e3d78 : 0x2abf6a (0x59e3d0 0x550759 0xe 0x59e59a)
    0x575e3e58 : 0x2a1a78 (0x575e3e70 0xb0e4080 0x575e3f28 0x550759)
    0x575e3e68 : 0x550759 (0xe 0x20048 0x8e10010 0x10)
    0x575e3f28 : 0x542585 (0x8388620 0x8d75a00 0x575e3f5c 0x516766)
    0x575e3f78 : 0x5443d5 (0x8d75a00 0x0 0x575e3fac 0x1)
    0x575e3fc8 : 0x2a179c (0x9e617c0 0x0 0x10 0x8b55064)
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: iMac11,3 (Mac-F2238BAE)
    System uptime in nanoseconds: 8056835665285
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI          4.2.0 (addr 0x11c9000, size 0x65536) - last unloaded 137415862470
    loaded kexts:
    com.apple.driver.AppleBluetoothMultitouch          54.3
    com.apple.filesystems.msdosfs          1.6.3
    com.apple.driver.AGPM          100.12.31
    com.apple.driver.AppleHWSensor          1.9.3d0
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AudioAUUC          1.57
    com.apple.driver.AppleMikeyHIDDriver          1.2.0
    com.apple.driver.AppleMikeyDriver          2.0.5f14
    com.apple.driver.AppleHDA          2.0.5f14
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.kext.ATIFramebuffer          6.3.6
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.AirPort.Atheros21          425.14.7
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.driver.AppleLPC          1.5.1
    com.apple.driver.AppleBacklight          170.0.46
    com.apple.ATIRadeonX3000          6.3.6
    com.apple.driver.AppleIRController          303.8
    com.apple.driver.AppleUSBCardReader          2.6.1
    com.apple.iokit.SCSITaskUserClient          2.6.8
    com.apple.iokit.IOAHCIBlockStorage          1.6.4
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.driver.AppleUSBHub          4.2.4
    com.apple.iokit.AppleBCM5701Ethernet          3.0.5b8
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleUSBEHCI          4.2.4
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.12
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.driver.AppleBluetoothHIDKeyboard          141.5 - last loaded 54964210724
    com.apple.driver.AppleHIDKeyboard          141.5
    com.apple.driver.IOBluetoothHIDDriver          2.4.5f3
    com.apple.driver.AppleMultitouchDriver          207.11
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.DspFuncLib          2.0.5f14
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.driver.IOPlatformPluginFamily          4.7.0a1
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.1
    com.apple.iokit.IONDRVSupport          2.2
    com.apple.kext.ATI5000Controller          6.3.6
    com.apple.kext.ATISupport          6.3.6
    com.apple.driver.AppleHDAController          2.0.5f14
    com.apple.iokit.IOGraphicsFamily          2.2
    com.apple.iokit.IOHDAFamily          2.0.5f14
    com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
    com.apple.iokit.IOUSBMassStorageClass          2.6.7
    com.apple.driver.AppleUSBMergeNub          4.2.4
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.driver.XsanFilter          402.1
    com.apple.iokit.IOAHCISerialATAPI          1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IOUSBFamily          4.2.4
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          6
    com.apple.driver.DiskImages          289.1
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    System Profile:
    Model: iMac11,3, BootROM IM112.0057.B00, 4 processors, Intel Core i5, 2.8 GHz, 4 GB, SMC 1.59f2
    Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.6
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: WDC WD1001FALS-40Y6A0, 931.51 GB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0xfa111000 / 6
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0xfa120000 / 3
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 3

  • Can not connect to WiFI with IPAD.  Any tips?

    Any tips on how to connect to WiFi.  The IPAD does not find WiFI.  I know that is working as I currently have 3 other devices using currently.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT201210 my 4S can not connect to wifi

    how can I resolve my 4S not able to connect to the WiFi? Restored the software and settings and still does not connect
    Thanks in advance

    connect in recovery mode.
    http://support.apple.com/kb/HT1808

  • Can not connect to WiFi on my iphone.

    Hello, at my work i usually get wifi on my iphone until today. when i try to go to webpage it says safari can not open the page. you are not connected to internet. but when i turned off the wifi i can go to website.i reset the network and then typed the wifi password. but issues remained the same. i am not sure what is causing the problem. any help will be appreciated. thank you

    Try rebooting the WiFi router by turning it off or unplugging it for 30 seconds.

  • Can not connect to wifi away from home

    i have no problem connecting to wifi at home...when i visit other locations my itouch will not connect. i have tried reset the network settings. my itouch shows the ip setting and other information for connection but it will not connect.

    It might be that you have not acknowledged the network's agreement to use it. If you're using OS 3.0 or later on your Touch you should be able to open Safari and be re-directed to the network's Terms of Use page, then you should have access once you agree. If you're using 1.x or 2.x OS then sometimes it is harder to "see" this Terms of Use to acknowledge.
    If that doesn't help, you can try editing the DNS that the network is giving you. You can try 208.67.222.222 and 208.67.220.220 which are the OpenDNS addresses. Sometimes that helps you get access in case the network is feeding your Touch incorrect DNS addresses. OpenDNS is free, safe, and pretty cool to implement on your own home network since it allows you to control content and monitor usage.

  • Can not connect to Wifi (2.4 WPA2)

    Hi team,
    My iphone 5s (IOS 7.0.4) has problem to connect to the WIFI in my office (2.4 WPA2 - corporta use router, setting could not change), before I go to China local apple store, I have tested other apple devices, including iphone5, iphone4s and iphone4, all of them can easily connect to this WIFI. And my iphone5s network setting has been reset for more than three times.
    The WIFI issue is not replicated as I dont have any issue to connect to other public/private network. The genius tests my iphone5s and confirms that no issue is found, so he suggests that, I should choose "other" and put WIFI details. However, it does not work at all.
    Could anyone help?
    Thanks,
    Luhouse

    Update - resolved our connectivity issue. Turns out it was a MAC address filtering problem on the Airport network.
    Some months ago we tried enabling MAC address filtering on our network, i.e. where you add the MAC address of each device on your network into a list on the Airport and set what access it has. I'm pretty sure we then decided it was unnecessary and left in the default option which is that unknown devices are allowed unlimited access once they connect. I know that I logged a visiting consultant into our network last week and they had no problem, even though I hadn't put their MAC address into the list.
    Today, 3 devices couldn't connect. After a full day of troubleshooting, turning off MAC address access control immediately solved the problem. Now we haven't made any changes to our network configuration in the last 24 hours, nor any changes to the devices that started having problems. So I think, but I can't prove it obviously, that Apple pushed a silent update that changed that default option from 'unlimited access' to 'no access'.
    Luhouse - this might not be your problem at all, probably isn't, but leaving this here in case it helps someone else.

  • P1102w can not connect to WiFi router

    I change my wifi router and my printer can't connet to new router.I try to connet by usb port and i get error (See Pic) and i press next  this error coming again. yes i reconnect usb and try again some times i chang usb cable. It 's same error. idon't know why?
      Please help me for my problem. now i can not work.
    sorry for my english.

    Sounds like you are having an issue configuring your new printer with your new router. Can you tell me more information about the router? Make and model for instance. 
    Are you attempting to perform the USB >> Wireless conversion through our software? If you are, is your computer connected to the network in question? 
    Here is information additionally to help you get this connected :
    http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=50885&tmp_task=solveCategory&cc=us&d...
    Let me know and I will get back with you as soon as I can! 
    Have a wonderful day! 

Maybe you are looking for

  • Error inserting a row into a table with identity column using cfgrid on change

    I got an error on trying to insert a row into a table with identity column using cfgrid on change see below also i would like to use cfstoreproc instead of cfquery but which argument i need to pass and how to use it usually i use stored procedure upd

  • Price determination after historical simulation

    I am confused about price determination after value at risk historical simulation run, my evaluation day is 2014.March.31, for commodity forward, the floating leg is based on price 42.17286 (the eighth shift for VaR calculation, my holding period is

  • Issue with Exclude Selection in Bex

    Hi all,    I have created a query to display the Top 10 Customers. Here I have excluded all the customers apart from the Top 10 since they differ based on different regions. There are 4 different regions and the customers differ for all of them. Here

  • Problem Configuring Single-System TMS in new install of SM 7.1

    Going through post install steps of new Solution Manager 7.1 system; SID is SMV Follwed the instructions to set up the Transport Management System in Client 000.  The consistency check returns all green checkmarks. User TMSADM exists in client 000, P

  • [Worklist API] Failed to fetch task list

    Hello Guys, I am trying to fetch tasks using worklist API but it doesnt work for me..It returns the Task list whcih has 0 (zero) tasks. Below is the code i am using: Hashtable props = getBpelProperties(); Locator locator = new Locator("default","welc