Can not connect to WiFI with IPAD.  Any tips?

Any tips on how to connect to WiFi.  The IPAD does not find WiFI.  I know that is working as I currently have 3 other devices using currently.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • I can not connect to wifi with router WRT54G2 v1 with Windows 7

    Hi everyone: I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi.
     I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.
    I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.
    I Try chatting with Cisco support and was told he was no longer under warranty ....
    Can you tell me how to solve this problem ???
    Thank you for your help !!!
    Solved!
    Go to Solution.

    Sure, disable security on the router completely for now.  Now try to connect with no security.  Once done and verified  go back and add  security back on of WPA2-AES with a new password and try again.

  • CAN NOT CONNECT TO FACTIME WITH IPAD

    I can not log on to facetime it keeps telling me that it can not verify my passowrd it will send me a password to my e-mail address but I never received any e-mail to that effect

    Check any spam folder, even through another device!

  • Can't connect to wifi with my iPad

    can't connect to wifi with my iPad

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?

    I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?
    Thank you.

    The Holy Mecha of Wifi
    Turn router off then on Try turning your wireless router off then back on.
    Change or turn off wireless security You may want to try toggling the settings on your wireless router, switching from WPA to WEP or vice versa, or, as a last resort, turning wireless security off altogether. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
    Reset network settings on iPad. On your iPad, open Settings, then navigate to “General” in the left-hand pane. Scroll down and tap Reset, then select “Reset Network Settings.” This will delete any stored WiFi passwords and other information, but may result in a more stable connection.
    Adjust brightness upward. Oddly, a number of users have found that they can resolve this issue by simply adjusting the iPad’s brightness level upward and off the lowest setting. To do this, tap Settings, then select “Brightness & Wallpaper” from the left-hand pane. Slide the brightness bar upward, then wait 1-2 minutes and check for an improvement in signal strength. Speculation holds that a power delivery issue associated with the screen brightness affects Wi-Fi.
    Change thresholds in router settings. Access your routers configuration screen (for most routers, open a browser and enter the address 192.168.1.1), then change the fragmentation threshold and the CTS/RTS threshold as described here. Some users have found success with the settings Fragmentation= 2048, RTS = 512.
    Change 802.11 spec on router. Try changing your router’s wireless spec mode from B, G and N to G only or vice versa. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
    Switch routers. Although a far-from-ideal solution, some users have found success with switching to a different wireless router.
    Turn off “Ask to Join Networks.” To do so, tap Settings on your iPad, then select “Wi-Fi” from the left-hand pane. Slide “Ask to Join Networks” to off. Speculation holds that leaving this option on causes the iPad to constantly seek networks, resulting in some type of interference with the network to which it is connected.
    Forget network then rejoin. Tap Settings on your iPad, then select Wi-Fi from the left-hand pane. Choose the network with which you are experiencing difficulty, then select “Forget this network.” Go back to the previous screen and rejoin the network.
    Turn off Bluetooth. Some users report that, perhaps due to interference issues, turning off Bluetooth can boost Wi-Fi signal strength. To do so, tap Settings then tap General in the left-hand pane. Tap Bluetooth in the right-hand pane, then slide to off.

  • Can i connect my HDTV with ipad

    Can i connect my HDTV with ipad?

    gyrhead is right - a short video embed to further explain ( hopefully it works )
    Regards.
    Embed did not work as I thought -
    heres a link : http://youtu.be/UnyyCMPyTq8

  • Iphone 4s can not connect to wifi

    I have an iphone 4s can not connected to wifi even it was working the day before problem.

    Power off your phone, unplug the router and modem for 2-3 minutes, then plug them back in, power your phone on, and try to reconnect.

  • IPhone can not connect to wifi

    Since I downloaded IOS 7 to my iphone 4S, my battery life is greatly diminished and I can not connect to wifi. I reset my systems, but still the wifi button is grayed out. Suggestions ?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • I can not connect to wifi using iphone 4s

    I can not connect to wifi using iphone 4s

    If this is you home wifi try resetting the router.  Turn if off at the wall wait a minute and turn it back on.  Are you sure you have the right password?

  • After updating to 10.8.1 i can not connect to wifi   no hardware installed , it says

    When I installed the update to 10.8.1 there comes a message that there was a problem by installing.
    Now i can not connect to a wifi network, when i click on the wifi at the bottom
    No hardware is installed
    Why is there no hardware installed?
    Under 10.7 all was fine

    I have MacBook unibody late 2008 with OS X Mountain Lion on board. Wifi stopped working suddenly and I spent about four terrible hours to solve a problem.
    Actually, none of mentioned and googled advices helped me out to solve this issue with 'WiFi: No Hardware installed'.
    Except one thing: using the wifi kext from the Snow Leopard. You may use utility and kext from here: http://rys.sommefeldt.com/2011/09/04/osx-lion-wifi.html
    I hope, this can help.

  • Can not connect to wifi to configure

    I can not connect to home wifi to configure. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Can not connect to ftp with mountain lion

    Hallo everybody,
    i have a problem with my ftp-client, i use cyberduck, i can not connect to any ftp-server...
    evertime i get this message:
    USER user_xyz
    331 User user_xyz OK. Password required
    PASS **********
    530 Login authentication failed
    this will only happen when i try it with mountain lion 10.8.2
    with snow leopard and lion everything works fine and i can connect to the ftp-server.
    i try to take another ftp-client but its the same... i try filezilla and transmit.
    can anybody help me with this problem?

    In your Network System Preferences, under Advanced, Proxies tab, is Passive mode selected? If it is, try toggling it off then on (or try it with it off).
    Also, have you contacted the Cyberduck people to ask if they know about a problem?
    Have you tried connecting from Terminal?

  • I can't connect to wifi with my iPhone 6

    My iPhone 6 will not connect to wifi. I have restarted it, restored network settings. I have shut off the key chain in iCloud.

    Hi bgb07,
    If you have an issue with your iPhone not connecting to any Wi-Fi networks, and you have already tried restarting the phone and restoring your network settings, I would suggest that you back up any data on your iPhone and restore it as a new device. See this article -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • TS1717 I can get on my itunes but when I go to update it has an error saying that I can not connect to update server. Any suggestions

    I can get on my itunes but when i go to check for updates it has an error saying that I can not connect to update servor. I checked my firewall and Itunes is checked for exceptions, any ideas

    See if this helps:
    Trouble installing iTunes or QuickTime for Windows

  • Can not connect to wifi-network

    I have a iphone 4 that I managed to lose in the toilet. it is relatively in good condition,but can not connect to wi-fi networks. seems as if it is unable to receive signals. is there anything I can do to fix it?
    and I have no dial tone when I call. what can I do?

    Apple has an out of warranty replacement program for phone's like yours, cost in the US is $199. That would be your best course of action.

Maybe you are looking for

  • How can you get the update on an iPad 1

    I really want to get the update on my iPad 1 but I'm not sure how to do that help please?!

  • Multiple web service calls - Split message,1 WS call for each message

    Friends, We have designed a BPM which will pick the files, make web service call and merge these message structures and map them to the target. We have to modify this design as follows, We have to split the message based on purchase order number, mea

  • An easy question about GET_ITEM_PROPERTY

    Hello friends at www.oracle.com , how can I obtain the item's initial value by using GET_ITEM_PROPERTY built-in? I couldn't find it even at Oracle documentation. Best regards, Franklin Gongalves Jr.

  • ITunes locks up on startup...Have to force quit.

    When opening iTunes, it attempts to do a download of updated Podcasts and locks up, showing only the spinning cd icon. Rest of computer operates normally. When going to "force quit", it indicates that iTunes is "not responding". I've force quit a cou

  • Checkbox not sending value to database

    I have a form I have built in dreamweaver cs4, the textfields work correctly sending the typed information to my mysql db. I need to add a lot of check boxes to the form for persons to pick from. I added a  couple and tested them and I always get a "