Can not connect wireless laptop with wrt320n router

I just installed a wrt320n router with no issues. I am trying to hook up my wireless laptop and it is finding the network, but when I click on the network to connect, it is asking to enter credentials: (user Name, Password, and login domain). I have never seen this before. It is not asking for the password. HELP!!
Thank you,
Chris

Which operating system you are using...?
Which Security you are using...?
Try to create the profile manually and check if that helps..!!!

Similar Messages

Can not connect to ftp with mountain lion

Hallo everybody,
i have a problem with my ftp-client, i use cyberduck, i can not connect to any ftp-server...
evertime i get this message:
USER user_xyz
331 User user_xyz OK. Password required
PASS **********
530 Login authentication failed
this will only happen when i try it with mountain lion 10.8.2
with snow leopard and lion everything works fine and i can connect to the ftp-server.
i try to take another ftp-client but its the same... i try filezilla and transmit.
can anybody help me with this problem?

In your Network System Preferences, under Advanced, Proxies tab, is Passive mode selected? If it is, try toggling it off then on (or try it with it off).
Also, have you contacted the Cyberduck people to ask if they know about a problem?
Have you tried connecting from Terminal?

Why can i get a connection w/my wireless laptop with this router (WRT54GS ) but not on the desktop?

I have an excellent signal w/this laptop (wireless) but when I try to use the desktop with the same router it wont go. Do I need driver download? Do I need an IP address for the router? I use tech support for connecting the desktop to the internet straight from the modem they sent me but because I didnot buy the router from them, they wont help me figure out once I plug in the router and setup more than one machine, i cant do it. Initailly, I setup everything w/my laptop being the main computer in my home until I got this desktop recently. So knowing the desktop is fine because it works straight from the modem, and the laptop works w/the router and modem hooked up together but not the desktop, what the HECK is the problem? I dont have any cd or anything w/this router because when I moved, i never found the box it came in again. Is there someplace online I can find what I need? Im wondering how I will know if I have a response from someone on this thread? will I get an email from this site? gosh Im confused.
(Mod Note: Email address removed.)
Message Edited by kent07 on 10-28-2009 07:29 PM

How you are trying to use the desktop...wired or wireless?
If you are trying to connect the computer to the router via an Ethernet cable then,try changing the cable.Check the ip address you are getting on the computer...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on OK...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

I can not connect to wifi with router WRT54G2 v1 with Windows 7

Hi everyone: I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi.
I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.
I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.
I Try chatting with Cisco support and was told he was no longer under warranty ....
Can you tell me how to solve this problem ???
Thank you for your help !!!
Solved!
Go to Solution.

Sure, disable security on the router completely for now. Now try to connect with no security. Once done and verified go back and add security back on of WPA2-AES with a new password and try again.

New router and can not connect wirelessly

Installed a new router that changed my security from a WEP to a WPA2. I have connected to the printer(7410) through ethernet cable and changed the security settings but the printer will not connect to my router. I am currently printing by ethernet cable hooked directly into the router. When i try to use the printer interface to cinnect to router the only option that comes up is WEP.
Any ideas?
This question was solved.
View Solution.

The printer will support WPA, but not WPA2. It may have previously been connected to WEP and is expecting that. Let's reset it:
From the front of hte printer: Setup > Network > Restore Network Defaults. Now try the Wireless Setup Wizard from that same Network menu.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can't connect wirelessly to D-Link Router?!

I'm using an iBook G4 with Airport Extreme, and I can't connect to my home wireless D-Link Router. It's WPA encrypted, but I'm using the proper key.
When I boot up the laptop, I can find a strong signal- it sees it, but when I pull up Safari, Firefox, or iChat, it says I'm not connect to the internet.
Any suggestions, or need more info?

Did you already try using the troubleshoot button on the error page?
Also, make sure that both the network name (SSID) and the WPA password are correct (and choose 'WPA Personal' as security type).
Here's some additional info from Apple : http://docs.info.apple.com/article.html?artnum=107921
You could also check if the signal you are receiving does indeed come from your router and not from your neighbours'...(click on the airport icon to see the list of 'available' networks)
iBook G4 Mac OS X (10.4.7)

Can't connect HP laptop with Airport Express

My gov't agency has just allowed employees to connect to its intranet through wireless connections. I have an Airport Express which I use for my MacBook Pro, iPhone and iPad. No problems. The work computer is an HP laptop running Windows. I contacted our tech support and they didn't know what to do and suggested that it may be an Apple problem and that the AirPort will not connect to non-Apple devices. Is this true? Do I need to buy a new wireless router? Anyone with any suggestions on what I can do to get the AirPort to work?
Thanks in advance.

All wireless routers must adhere to the same standards for wireless networks, so there is nothing unique about the wireless network that the AirPort Express is creating. Visiting relatives have no trouble connecting their PCs to the Apple wireless network here at the house.
Chances are, the Windows Firewall or anti-virus applicaton on the HP may be blocking the attempted connection as a security measure.
As a last resort, you could also try reducing the security level on the AirPort Express in case the HP is not able to connect to the most secure wireless networks.
To do this from your MacBook.....
Open Macintosh HD > Applications > Utiltiies > AirPort Utility
Click Manual Setup
Click the Wireless tab located below the row of icons
Change the Security setting to WPA/WPA2 Personal
Click Update at the lower right and wait 40-45 seconds for the Express to restart

Can not connect wireless through Bootcamp Windows XP to Timecapsule?

Any help would be appreciated.
I recently purchased an iMac with Leopard (10.5.2). Today, I used Bootcamp to install Windows XP with SP2. I created a FAT partition of 32 gigs and followed all of the steps (including installing drivers off of MAC OS installation disk 1 while on initial XP boot up).
My wireless network is on a Timecapsule and is "WPA Personal secured". The Mac OS detects the network and connects instantly, my work laptop PC detects the network and connects instantly. However, the newly installed XP detects the wireless network but will not connect. When I try to connect to the network, I receive an error message that basically states "unable to connect...". I do not even get to a screen that asks for me to enter a network key or password. When I try to connect to two other networks in the neighborhood, I at least get the network key screen.
I have gone into the Windows network tools and have tried to manually configure the connection, but I still get the same problem. I thought maybe I had "WPA2 Personal" enabled as the security setting for the network (XP does not support WPA2 out of the box) , but I have it as "WPA Personal".
Can't figure it out. I am new to Macs (about 1 month). The reason I switched was because I could run both Leopard and XP.
Best regards,

Solved my own problem.
FYI
Even though my security settings on my Timecapsule are listed as "WPA Personal", my work PC Laptop kept detecting as "WPA2 Personal". I even removed all security settings from the Timecapsule and my laptop still detected as "WPA2".
I know that XP does not support WPA2 out of the box.
I hooked directly into the Timecapsule via an ethernet cable while in Windows environment. Thankfully, I was able to access the internet. I went to Microsoft and did a search for WPA2 patches for XP. Found one that allows XP wireless connection to WPA2. I installed the patch and was able to detect and connect wirelessly to Timecapsule from XP.
After two days, I have come to the firm believe (don't know the technical reasons why) that Timecapsule is a WPA2 device and that the XP patch is the only way to create initial connectivity. It is sort of ironic that although I wanted to connect wirelessly, I had to first connect via an ethernet hard connection.
Solve one problem, left with another. I have a Epson all-in-one scanner, printer, copier hooked to the Timecapsule. My iMac picks it up fine wirelessly but I am getting nothing on XP. Hopefully it is a simple driver download issue.

How to connect wireless printer with new router

I have a new router and I can get onto my computer wirelessly, but my printer won't work. How do I chang the WLAN settings?
Thank you

patriciafrompalmdale wrote:
It always has been. It is not connected with a wire, just wireless.
Go to System Preferences>Print & Scan
Click the plus sign, printers on the local network will appear under 'Nearby Printers', select your Canon and the install will commence.

I can not connect my iphone with windows 7 64 bit via bluetooth

how can i connect my iphone 4 via bluetooth and when i connect iphone with laptop it says "bluetooth peripheral device" drive problem in my device manager, why"

This is not a feature of iPhone. Bluetooth file transfer is not supported. Unless it's for the specific purpose of tethering, the iPhone will NOT connect to a computer via bluetooth.

I can't connect to network with my router

I am using the model WRT54G, and it is starting to refuse connections... Then i went to "Status -> Router" (in 192.168.1.1) and all camp fields are blank, with IP's 0.0.0.0. I upgraded my firmware and the problem stays at same...
Can anyone help me?
ThanksMessage Edited by The_Gladiator on 12-10-200610:39 AM

I had the same issue before I bought my new PC. I could not connect to the internet with my new PC wired to the router but could connected to the modem. I figured out the way to do it was clone the MAC address of the PC I used to setup the internet which was no longer wired. I disable Clone MAC and I would lose internet. Get nothing but 0.0.0.0 in the status page. I did a hard reset on the modem and disabled Clone MAC in the router. Powered everything off and waited about a minute. Powered everything back up and was in business. Had internet and didnt have to clone the MAC.
Now I dont know if this will work for you but it did for me.
If you have a modem with battery backup you need to unplug the power cord then remove the battery to truely powercycle it. (Words from Comcast)

HELP: Can not connect LDAP server with 64bit ldap csdk5.08 on Solaris10

We are using 64bit ldap csdk5.08 on SunOS5.10. But it doesn't work.
We wrote a simple client program that connects using ldap_simple_bind_s() function. When I run the code it gives an error saying 'Can't connect to the LDAP server - Connection refused' .
At the same time using snoop to capture network packages on the ldap server , it shows no package received at all.
But if we use 32bit ldap library, the program works well and no error is raised.
And the 64bit ldap tool ldapsearch also works well, it can search data from the server successfully.
The sample code:
==================================================
#include <ldap.h>
#include <stdio.h>
int
main( int argc, char **argv )
     LDAP *ld;
     int rc;
     /* Get a handle to an LDAP connection. */
     if ( (ld = ldap_init( "150.236.42.53", 38902)) == NULL )
          perror( "ldap_init" );
          return( 1 );
     /* Bind anonymously to the LDAP server. */
     rc = ldap_simple_bind_s( ld, NULL, NULL );
     if ( rc != LDAP_SUCCESS )
          ldap_perror(ld, "ldap_simple_bind_s:");
     return( 1 );
}

This looks like a mismatch between C-sdk libraries and Solaris native libraries.
Are you sure your program loads the correct libraries ?
Ludovic.

CAN NOT CONNECT TO FACTIME WITH IPAD

I can not log on to facetime it keeps telling me that it can not verify my passowrd it will send me a password to my e-mail address but I never received any e-mail to that effect

Check any spam folder, even through another device!

Can't find wireless printer with E2000 router

I have a Dell Inspiron 1720 (running Vista Home Premium) that connects to my Linksys E2000 and to a wireless printer, the Canon MX870. It's been working for months without problems.
I just got a Toshiba Satellite P770-BT4G22 Laptop (running Window 7 Professional 64 bit) and installed the Cisco Connect software following the instructions where you have already set up the router and just need to install the software to do things like add a device. I can connect to the router fine using a web browser or the Cisco Connect Software and my Toshiba connects to the Internet through the router without problems.
The problem is Cisco Connect says it can't find a wireless printer when I run it on my new Toshiba. I've put the printer within 3 feet of the router with my Toshiba in between but still it can't find it. My Dell in another room connects to the printer no problem. And I can print to the Canon if I select the Shared Canon Printer ( on the Dell) using the Toshiba's Control Panel Add Printer function. But obviously that means the Dell has to be on so that's not good for much more than troubleshooting. I've also wired a connection from the printer to the Toshiba and downloaded the latest driver, printed that way so I know that's not the problem. The problem is that Cisco Connect can't find the printer. It says there are 6 devices attached to my router so it's seeing something, but I guess not the printer. I've turned any firewalls off for this testing too.
I'm stumped as to why it can't find the printer when the Dell did and they are all on the same network. Unless it's not compatible with 64 bit Windows. Any help would be greatly appreciated.
Thank you.
Solved!
Go to Solution.

I have already added the printer to my network using Windows Add Printer prior to assigning the printer a static IP. But I followed your instructions in making the IP static so if I reset the router I don't have to go through the process again.
When I ran CC and told it to add a printer, it did not identify any printer for me, it went from the screen where you say to add a printer to one where it asked me to name the printer. Honestly, I wasn't even sure if it was referring to the Canon because I'd already added it using Windows, albeit without a static IP, just by knowing what IP it had been assigned. After I gave it the name, it went back to the "home" screen with computers & devices, parental controls, etc. No errors, but no real way to see or change what I had done.
That's why I was asking if there's a way to look at the router and view devices that have a static IP. I can view the DHCP table but it's not there of course. I don't really see anywhere using the router software (either by web connection or CC) where the Canon printer is listed. I see it in Windows Printers, but I saw it there before I reran CC and it asked me to name it.
I appreciate your help and I'm glad to be up and running with it. Especially with having a static IP. I'm just trying to better understand what happened and how to view my devices connected to the router.
Thank you very much for your help.

Can not connect to WiFI with IPAD. Any tips?

Any tips on how to connect to WiFi. The IPAD does not find WiFI. I know that is working as I currently have 3 other devices using currently.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can not connect wireless laptop with wrt320n router

Similar Messages

Maybe you are looking for