Can not connect wireless through Bootcamp Windows XP to Timecapsule?

Any help would be appreciated.
I recently purchased an iMac with Leopard (10.5.2). Today, I used Bootcamp to install Windows XP with SP2. I created a FAT partition of 32 gigs and followed all of the steps (including installing drivers off of MAC OS installation disk 1 while on initial XP boot up).
My wireless network is on a Timecapsule and is "WPA Personal secured". The Mac OS detects the network and connects instantly, my work laptop PC detects the network and connects instantly. However, the newly installed XP detects the wireless network but will not connect. When I try to connect to the network, I receive an error message that basically states "unable to connect...". I do not even get to a screen that asks for me to enter a network key or password. When I try to connect to two other networks in the neighborhood, I at least get the network key screen.
I have gone into the Windows network tools and have tried to manually configure the connection, but I still get the same problem. I thought maybe I had "WPA2 Personal" enabled as the security setting for the network (XP does not support WPA2 out of the box) , but I have it as "WPA Personal".
Can't figure it out. I am new to Macs (about 1 month). The reason I switched was because I could run both Leopard and XP.
Best regards,

Solved my own problem.
FYI
Even though my security settings on my Timecapsule are listed as "WPA Personal", my work PC Laptop kept detecting as "WPA2 Personal". I even removed all security settings from the Timecapsule and my laptop still detected as "WPA2".
I know that XP does not support WPA2 out of the box.
I hooked directly into the Timecapsule via an ethernet cable while in Windows environment. Thankfully, I was able to access the internet. I went to Microsoft and did a search for WPA2 patches for XP. Found one that allows XP wireless connection to WPA2. I installed the patch and was able to detect and connect wirelessly to Timecapsule from XP.
After two days, I have come to the firm believe (don't know the technical reasons why) that Timecapsule is a WPA2 device and that the XP patch is the only way to create initial connectivity. It is sort of ironic that although I wanted to connect wirelessly, I had to first connect via an ethernet hard connection.
Solve one problem, left with another. I have a Epson all-in-one scanner, printer, copier hooked to the Timecapsule. My iMac picks it up fine wirelessly but I am getting nothing on XP. Hopefully it is a simple driver download issue.

Similar Messages

Client can not connect to Server installed window server 2008 and using 8.8

HI all!
I have a problem when Client log in to server that installed window server 2008.It can not connect to this server even when restart and key in IP or Server name,...
I try disable Firewall of window 2008 in server machine and client can connect to server. But when i disable firewall, it's mean i can not use Remote desktop or terminal service..
Now, how i can do in order to solve this problem.
Thanks!

Hi,
Take a look at the admin guide (Page 75, 119, 159):
[http://service.sap.com/~sapidb/011000358700000150922010E.zip]
If you installed a firewall on the license service computer, make sure that the firewall is not set to port 30000; otherwise, the license service cannot work.
If you are using Port X, make sure that you open Port X and Port (X+1) in the firewall. For example, if you are using port 10000, make sure to also open port 10001.
The default communication port is 1143.
The default port of the SAP Business One license server is 30000 for license communication and 30001 for the license naming service

New router and can not connect wirelessly

Installed a new router that changed my security from a WEP to a WPA2. I have connected to the printer(7410) through ethernet cable and changed the security settings but the printer will not connect to my router. I am currently printing by ethernet cable hooked directly into the router. When i try to use the printer interface to cinnect to router the only option that comes up is WEP.
Any ideas?
This question was solved.
View Solution.

The printer will support WPA, but not WPA2. It may have previously been connected to WEP and is expecting that. Let's reset it:
From the front of hte printer: Setup > Network > Restore Network Defaults. Now try the Wireless Setup Wizard from that same Network menu.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I can not connect my iphone with windows 7 64 bit via bluetooth

how can i connect my iphone 4 via bluetooth and when i connect iphone with laptop it says "bluetooth peripheral device" drive problem in my device manager, why"

This is not a feature of iPhone. Bluetooth file transfer is not supported. Unless it's for the specific purpose of tethering, the iPhone will NOT connect to a computer via bluetooth.

Can not connect wireless laptop with wrt320n router

I just installed a wrt320n router with no issues. I am trying to hook up my wireless laptop and it is finding the network, but when I click on the network to connect, it is asking to enter credentials: (user Name, Password, and login domain). I have never seen this before. It is not asking for the password. HELP!!
Thank you,
Chris

Which operating system you are using...?
Which Security you are using...?
Try to create the profile manually and check if that helps..!!!

Airport Network status says Internet failed and I can not connect wirelessly. Ethernet connection works fine. Why can't I connect?

A few days ago, my Airport Express wireless connection stopped working. The network status lights for Internet and Servers are RED and indicate failure. My Ethernet connection works fine. Any idea what my problem is?
Thanks,
LivingSuccess

You could try a Safe Boot - restart holding down the shift key until the grey progress bar appears. When it's booted restart as normal from the Apple menu.
If that doesn't help you could try an SMC reset:
SMC Reset
Shut down the computer.
Unplug the computer’s power cord and disconnect peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.

I have an Airport Extreme wireless router & I can not connect my Kindle.

I have an Airport Extreme wireless router & I can not connect my Kindle. Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet. It says the password is incorrect. I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly. I see no tab to create a guest network. I do not mind giving my password to visitors, but that does not work.

If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

My X61 can't connect wireless when i use battery!!!

TYPE NO.: 7673-AN6
i confused why it can not connect wireless when i use battery?!
the problem drive me crazy nearly, it means i must take adapter every time
i help every one can help me!
cheers,

Most of the functionality and problems are in the drivers. The hardware tends to be discrete testable functions though these days there is a fair bit of functionality in the hardware. The hardware tends to be implementing better defined protocols where as the to and fro of the higher level protocols tend to be what varies from Access Point to Access Point. The 4965AGN is a fairly recent chip set and the drivers are far from smoothly running.
The problems can vary from AP to AP so may work at home but not at work etc. Some have reported here that the 4965AGN setup doesn't work with the Cisco 1200 Access Point and I have yet to be able to get it to work under Vista with the equipment at any New York Starbucks. T-mobile do use Cisco equipment but I don't know which models.
Anything you can do to simplify the situation helps. Maximum power. No security. Disable IPv6 on the connection etc. Just to give a rough idea of the kind of thing that might be wrong here are some of the things listed as known issues or fixed according to the readme of the driver (Originating from Intel) that was released for the 4965AGN on 4/11/08.
There are several authentication issues with EAP, PEAP and LEAP which will cause it not to authenticate. There are also Vista EAP issues and some things which may resolve with SP1 which was pushed out on update last week. So there are many comnbinations of situations which may not work and it is important to test with different access points. Authentication and security has more issues. Also at the higher speeds such as 54Mb some of the security mechanisms will not be able to keep up. AES is the only mechanism which Intel expects to work at 54Mb.
http://downloadmirror.intel.com/15806/ENG/relnotes.htm
There have also been past issues where the cards are silenced for twenty minutes after a failure to authenticate and in many cases the card will not be in a valid state after hibernation. It is noticable that when you phone T-mobile the first thing the tech has you do is completely shut the machine down - not hibernate - and begin afresh.
Once you have uninstalled and re-installed the drivers and connection manager a few times it is also possible to be having problems with junk left in the registry.
I don't recommend adding the 4965 drivers directly from the Intel site. I would wait for the one that has come through the Lenovo testing cycle.
In reality for those who don't want to make maintaining their laptop a serious hobby (Hopefully all of us - Far too much time is wasted on wireless) it is really a matter of rebooting your machine at a given access point. Trying your luck and then shutting it down and going somewhere else if it doesn't work. Use wires when you can. At home if your access point doesn't work check your configuratiions, temporarily remove all security, restore factory settings on the AP, reinstall from scratch and if it still doesn't work replace it with a different brand of Access Point.
Of course it is intended to just work and for 95+% of situations Wi-Fi does. The 4965AGN is newer so it has its fair share of early life issues to get resolved. Vista also still has issues. If the problem you are seeing is only when you are on batteries you are lucky and LANOgre's instructions may well solve it.
Message Edited by hiker on 05-19-2008 09:23 PM

ITunes can not connect to the store in Windows 8.1

Since i have upgraded to windows 8.1 itnues on acer keeps giving the message that it can not connect to itune store...it is not reading my ipod touch 4th gen or my ipad 3

Hey zoyashahab,
Ok, so it sounds like there are two issues here we want to address, the first being the iTunes Store connection issue and the second being iTunes not recognizing your iOS devices.
First, I'd start with troubleshooting the recognition by following the steps in here:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If after getting that running again, you still can't connect to the iTunes Store, then I'd go through the troubleshooting steps in here:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Welcome to Apple Support Communities!
Best,
Delgadoh

The wireless symbol is present and indicates a strong signal, but I can not connect to the Internet.

The wireless symbol is present and indicates a strong signal, but I can not connect to the Internet. I'm on my home network and have never had trouble before. My iPad is current on all updates. I have tried to reset the network settings, nothing has worked. I can connect to the internet via my iPhone personal hotspot and all other wireless devices are operating normally on my home wireless network.

I am also having this issue. My boy just got an iPod 4 touch, upgraded to iOS 6. I have a D-Link DGL-4300 108G Wireless Gaming Router. With the iPod I can connect to the router, get an IP address (either DHCP or Static) and even browse through the menu on the router, but I can't connect to the internet.
With a DHCP IP address the iPod give the error "Not connected to the internet" with the static IP address it takes a long time when trying to connect to a website but then it gives the error "server stopped responding".
Clearly the issue is in some setting in the router. I've tried setting up a filter so that the iPod will always have access based on MAC address. I've tried changing the various wireless connection settings, all to no avail. I would greatly appreciate some guidence here.

Xbox one controller can not connect windows

I have xbox one controller, but i can not connect to the windows on my iMac 21,5" late 2012 even though the driver was already installed on the windows
- imac 21,5" late 2012
- windows 8.1 pro 64 bit
- windows support software v. 5.1.5621

I don't have the xbox one controller but the xbox 360 controller and it works fine in windows 8.1 in bootcamp on my imac
my controller don't connect by bluetooth or whatever it has an usb dongle that came with it

Can not connect my wireless printer to the new router.

Can not connect my wireless printer to the new router.

Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

Can not connect to wireless network any more, missing command

I can not connect to any wireless network. I have been having this problem for days. In desperation I installed 10.4 in a seperate HD. I clicked on the airport icon in the upper tool bar, selected my network name and clicked on "open internet connect" and I was connected, what?? I rebooted into 10.5 and tried the same thing again. But the panel that opens when you click on the airport icon has NO "open internet connect" command. A couple of weeks ago I reinstalled my OS. I have run diskwarrior and Techtool pro. Thinking back to the time I first installed 10.5 I don't remember ever seeing that command. Is Leopard compatible with the airport card? How do I get my "open internet connect" command back??

It sounds like a problem between hardware and software. When you select your network, does anything freeze or does nothing happen?
Nothing happens.
Try this, open your Network Preference Pane, turn off airport off and delete the Airport connection by selecting "Airport" in the left pane and click the " - " button. Click on the "+" sign and create a new Airport connection. Hit Apply if it is available. Turn AirPort on and try to select your network and login if you can. The status should show Connected and an IP address should show up after of a couple of seconds.
I get "AirPort has a self-assigned IP address and may not be able to connect to the Internet". On a couple of occasions (over the last couple days) I got you are connected to the internet on IP 172.17.90.251. However when I tried to open a web page I got the banner you are not connected to the internet. Strange, the pref panet said I was the Safari said I was not. Certainly the IP address does not show up in a few seconds. I also have ComCast cable but I need to use the MetroFi-Free wireless so my wife has the bandwidth to do her company work using VPN.

Hi there can anyone help me out. I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free, anyway I can find the router but no Internet connection?

Hi there can anyone help me out. I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free, anyway I can find the router but no Internet connection?

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

Can not connect wireless through Bootcamp Windows XP to Timecapsule?

Similar Messages

Maybe you are looking for