CAN NOT connect with airport ??
I cant connect with my Airport, to my 2wire Home Portal 1000HG for some reason it always says There Was as Error joining Airport Networke "2WIRE538" it works fine with the LAN cable, but I would like to use it with wireless sometimes to, if anyone could help that would be awsome, I just dont want to sit on the phone with SBC yahoo or 2Wire for 5 hours
I suspect the version of the 2 wire you are using has one of 2 things either it is the wrong model for wireless connection, there are several, as shown.
http://computers.search.ebay.com/2wireDSL-ModemsW0QQfsooZ2QQfsopZ2QQsacatZ62023
If you have the correct 2 wire for wireless you may not haave the correct firmware, as shown below.
http://www.broadbandreports.com/faq/12110
Cheers Don
Similar Messages
-
I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards
ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1 -
I can not connect with pocket mac to my computer
I can not connect with pocket mac to my computer
I can not connect with pocket mac to my computer
-
I'm an active subscriber for creative cloud photography plan. However, I can not connect with lightroom mobile. On my desktop app or on iPad app I get the message ˜trial expired˜. Please, what is going on? Thanks for the help.
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
HT1369 why is my ipod can not connect with the i tunes store and can not sync
Dear apple,
Please kindly help me because my ipod can not connect with the i tunes store and can not sync eitherFollow through: iTunes for Windows: Device Connectivity Tests
That link, also contains other links that may be related to your problem and/or to your solution.
Hope this helps. -
Itunes can not connect with the Itunes store
Every time I try to connect to the ITunes Store an error pops up : Itunes can not connect with the Itunes store. I have downloaded the updated software and have access to the internet. Anyone ever run into this problem?
If it still has problems after trying the steps above, try resetting Winsock. It looks like it worked for a few people in this thread -> With iTunes 10.4 I can access iTunes store.
MTG68 wrote - In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer. -
Acrobat can not connect with the email program, what can I do?
Acrobat can not connect with the email program, what can I do?
Hello,
I'm sorry you're having trouble; unfortunately, I'm not sure I understand what's going wrong. Would you mind giving me more details about what you're trying to do and what the problem appears to be?
Just in case you're using the desktop version of Acrobat and not Acrobat.com (which is the forum to which you posted your question), here's a link to their forum so you can repost your question there:
http://forums.adobe.com/community/acrobat
Thank you! -
i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
ThanksHere are some things to try:
Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again
And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall. -
I downloaded the new iOS6 update to my 4s and now I can not connect with the iTune or App store. How do I fix it? My Wi-Fi works fine.
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
I receive an error message0xe800007f iTunes can not connect with iPhone unknown error
i receive an error message, " itunes can not connect with iphone , unknown error
" 0xe800007f
i have mac mini with lion os and iphone 4sMake sure you have the latest version of iTunes. You can download it from here -> http://www.apple.com/itunes/download/
If that doesn't work, check out this Apple article -> iOS: Unknown error containing '0xE' when connecting to a Windows PC -
Can not connect with itunes with iphone but can connect with same password with my computer
I can not connect with Apple ID by IPhone but I can with same ID on my computer.
Read the article from which the thread was started.
-
I do not know why, but I can not go to the App Store! before I went there without any problems but now I can not connect with App Store
Open the Finder. From the Finder menu bar click Finder > Go > Go to Folder
Type or copy/paste: ~/Library/Cookies
Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Try the App Store. -
Hallo erst mal;) // Warum kann ich nichts kaufen? Ich habe zwar Kreditkartennummer usw. korrekt eingegeben. Wenn ich etwas kaufe steht dort immer: ,,Can not connecting with iTunes-Store''. Wie kann ich also was kaufen?
Ich habe das gleiche problem....ich hoffe auf eine schnelle loesung...
-
Can not connect with dhcp - renew dhcp lease will switch directly to manuel
If have the following problem
I us apple Airport extreme to connect to internet.
I have 5 Macs, all connecting with airport . They work fine with DHCP. Since 2 weeks I have a problem that one computer – a mac book pro with 10.5.6 will not connect.
When I switch to dhcp and select renew dhcp lease it switch directly back to manuell. I have no chance to connect with dhcp.
Has anyone a suggestion?
ThanksWonder why Apple hasn't chimed in on this one...
Whenever you have an issue like this where it's fine, then DHCP stops working for any reason.... Reset the PRAM.
How to:
Apple Logo -> Restart.
After the screen goes black -> Hold down all 4 keys until you hear the third Bong.
"Option"+[Apple Logo OR key to the left of the space bar]"P""R"
After the third BONG or Apple Chime whatever you want to call it. The system's Parameter Ram or to the PC Crowd the CMOS has been reset. This resets your clock, brightness, volume, etc.... So things will get reset along the way but it also resets the IRQ and DMA stats on the logic board. Ala, reseting your Airport's Connection to the logic board, Controllers, etc. -
Can not connect with Gmail.
I can not connect my mail.app with gmail.
smtp connection is fine.
but i can't connect pop.
I look through discussions and it looks randomaly happening.
however, can anyone help me out?
I'm keep getting this message "There may be a problem with the mail server or network. Check the settings for account "Gmail" or try again.
The server error encountered was: The connection to the server "pop.gmail.com" on port 995 timed out."
Thanks.
MacBook Pro Mac OS X (10.4.8) Powerbook G3You can't connect at all, or you have been able to connect and it randomly drops??
I've been using Mail to check my Gmail accounts for a while now, and sometimes it will be delayed, but I've never had a long term probelm with it.
Just for reference:
http://mail.google.com/support/bin/answer.py?answer=13275
Maybe you are looking for
-
Hello all, I am posting the vender invoice from MIRO the tds amount is not reflecting in the REPORT jJ1INMIS but when i post the invoice fro fb60 the report shows the TDS values what could be the reason. Difference of doc type only. Suggest
-
Problem in importing SAP Exchange profile (BASIS settings) - Urgent
Hi, I am currently facing problem in importing SAP Exchange profiles manually. When i enter into http://<J2EE_host>:<J2EE_port>/exchangeProfile with username as PISUPER, the page is getting loaded but <b>1.</b>it shows a error message stating, Name o
-
Hi! I have troble geting Photoshop CC to start, moreover the team in India seems to have that to... I join the Cloud i march this year, I live in Sweden, but there is no support i Swedish, Ok I can live with that, I was than booked for Photoshop CS6
-
Flash Professional Help | Packaging applications for AIR for iOS
This question was posted in response to the following article: http://helpx.adobe.com/flash/using/packaging-applications-air-ios.html
-
Hi, has anyone used R/3 class hierarchy in BW reports? I would like to use classification system in R/3 to build up class hierarchies both for material and customers and use those in BW reports. At this point of time I would only be using classes wit