Can not copy data within a realtime cube due to combination issues

Hello all,
I want to use a planning function on a realtime cube in order to copy data from from Co_area CO1 into Co_Area CO2. The Co_Are and the profit center are part of the realtime cube, but not the nav attribute of the profit center.
When I test/run the planning function via a sequence in planning modeller I get an error message: The combination 'CO2/PCxy,#' is not valid, valid is 'CO2/PCxy,abcd': characteristic '0PROFIT_CTR' .
Has this error something to do with the relationship of the master data of profit center and its nav attributes?
Any help would be great.
Best regards,
Stefan form Munich/Germany

I guess this problem is coming because of some wrong combination of records present in cube for controlling area 1. Make the below changes in the planning function. Dont include profit center in the level. Just include controlling area. Create a characteristic relationship of type derivation by master data attributes. Give source char as Controlling area and target as profit center. This will mantain consistency of char. combinations b/w controlling area and profit center in cube for the newly generated records.

Similar Messages

  • Can not find data in virtual cube

    Experts,
    I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
    Can anybody tell me what could be the reasons the data is coming through Virtua cube.
    Thanks,
    AK

    Hi,
    i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
    regards
    Siggi

  • Can not change data in Input Ready Query

    All,
    I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
    Note:
    1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
    2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
    3. I am not using any characteristic restrictions
    4. I have not set any data slices
    5. I have set the property for Planning "Start query in Change Mode"
    6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
    7. I do not have currency/unit in row/column.
    8. There are any locks occurring
    Any pointers welcome.
    Thanks,
    Milind

    Hi Milind,
    Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
    I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
    Have cross checked all the points that you mentioned in this post but I cells do not change.
    There should be some way around to solve this problem.
    Thanks

  • I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

    can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

    Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
    Why can't you change the filename? Is it because the source drive is having problems?  If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
    If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
    Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

  • Can not copy text from a pdf file

    https://sites.google.com/site/sharedacrobat/data/cannot_copy_text.pdf?attredirects=0&d=1
    I can not copy the table caption in the above pdf. If I do so, I will get some gibberish, such as %"/*&+%",-.%&1",/*%9&,*09%&
    I'm wondering what happens to the pdf file. Is there a way to fix it so that I can copy the text?

    asdfabcedasf wrote:
    https://sites.google.com/site/sharedacrobat/data/cannot_copy_text.pdf? attredirects=0&d=1
    I can not copy the table caption in the above pdf. If I do so, I will get some gibberish, such as %"/*&+%",-.%&1",/*%9&,*09%&
    I'm wondering what happens to the pdf file. Is there a way to fix it so that I can copy the text?
    Does anybody know what cause the problem and how to fix it? The current walkaround is to convert the pdf into image, then load the image into acrobat and perform OCR. But this is tedious and some information may be lost. I'm wondering if there is a better solution.

  • Can not copy files to another hard drive for backup

    30May07
    Apple Support:
    I need to copy files from my home to an external hard drive because I need to do a complete re-install, and erase the laptop's hard drive.
    When I try to either move the home folder the icon is a house, I get an question stating that some of my files do not have permssions, do I want to continue anyway (Yes, I do!)
    A bit into the move, I get this message (dealing with permissions):
    Can not copy 1528.emix . Error code -36 .
    I have no such file or any .emix files either. I was able to copy to whole hard disk, not just the home to the same external drive two weeks ago.
    How can I copy my HOME to my external drive so I can reinstall the OS?
    Thank you for your help

    07Jun07
    I believe the problem was my computer's internal drive. It corrupted several files. I had a very hard time copying the files. The -36 error stopped any transfer cold.
    I did a complete install of the OS.
    I need a way to determine what files are corrupt so I can delete them. It took 24 hours to constantly keep trying to copy the files to the external drive. I ended up deleting a lot of un-corrupt files. How can I determine which ones are bad so I don't delete good data?
    Thank you for your help. I am also grateful to the Apple Store in Tucson, AZ.
    You are having a hardware problem - there's a problem
    on one of the drives in this story.
    This can be caused by extra hardware connected to the
    computer, so if you have anything extra connected to
    the computer (external iSight, iPod, USB hub,
    anything) disconnect it.
    If that doesn't help, try reformatting the external
    drive and try again.
    If that doesn't help, just rescue what you can,
    because the next step is that you're going to be
    reformatting the internal drive.

  • Can not copy content

    i can not copy text from ebook
    Adobe Digital Editions

    I didn't see Andrew's post before I started working on the Service option. I fleshed out some things and came up with this:
    If you make it a service, you have to choose the type of data the service collects. Text seemed to work the best, but you had to right-click on some text in the card. In the workflow, you had to do something with the text or it would fail. I tried 'no input' as the service data type, but then you couldn't actually get the service to show up in the contextual menu.
    However, you can assign it a shortcut in the keyboard system prefs. I assigned the workflow cmd+shift-C. This works out fine. The workflow runs and copies the contact info to the clipboard.
    You can set up the Get Contact Information to collect whatever data you want. If you wanted to choose the type of data each time, you could set the options of that action to Show this action when workflow runs.
    To summarize the workflow:
    New Automator Service
    No Input in Address Book
    Get selected Address Book People
    Get Contact Information
    Copy to Clipboard
    Save this and then go into Keyboard System Prefs, Keyboard Shortcuts, Services, and set a shortcut for your new service.

  • Mac OS X can not copy files...?

    I am very new to Mac OS X and I found it strange that I can not copy files from my hard drive (docs, spreadsheets) to a blank CD-ROM disk. I called the local Apple store and they said I have to buy a third party application to copy(burn) files to CD-ROM disks. I am not talking about copying copyrighted files, just plain old Word and Excel docs. Does anyone know if this is true? I have to get a separate application to do this? Thanks, Tony.

    You can certainly copy files to to a blank CD without extra programs. But once there is data on the disc, it becomes much more complicated to add data at a later date.
    Windows, however, had a proprietary CD filesystem that let you use the CD like a floppy disc, where you could add and "erase" files randomly.
    You can buy an inexpensive program called BurnAgain that does something similar on the Mac.
    http://freeridecoding.com/burnagaindvd/
    Frankly, though, I think CDs make bad floppy discs. There is much more chance for data corruption when they are re-written.
    I'd recommend an inexpensive USB Thumbdrive (Flashdrive). They come in all sizes and really do work like a giant floppy disk -- only much faster. They are dirt cheap. You can find one the capacity of a CD for about $10 or less. DVD-size flashdrives are now under $40 some places.
    The easy way to burn data (once) to a CD or DVD is to create a Burn Folder. Hold down the CTL key and click once on your desktop. You'll get a pop-up menu with a choice to create a New Burn Folder. Name the Folder what you want the Disc to be named. Then open the folder and drag the files or folders you want to Burn onto the burn folder. It will actually create links (aliases or shortcuts in Windows terms) to those items. Click on the burn button at the top of the folder and it will ask for you to insert a blank CD or DVD.
    You can discard the burn folder if you are through with it, because it just contains alias (shortcuts). But I must warn you that if you navigate into the subfolders of those shortcuts, you will be dealing with your actual files. So please, don't delete anything inside a folder inside a burn folder -- those are your real files!

  • Can not receive data 10054

    My version of Essbase is 6.5.1.4. On the server machine it self when I am adding members to outline I get "Can not receive data 10054". To resolve this problem I tried to increase the server page file size but the problem persist.Does anyone know a solution to this problem?SAK

    How exactly are you retrieving data; is it smartview, excel addin, forms, reports etc ?

  • Can not extract data into BW from SQL SERVER

    Dear All,
      I meet a problem to extract data from database(MS SQL Server 2000(sp3)) into BW now and can not extract data into BW ODS, even PSA, In the monitor, display yellow light(0 from 0 record), detail message just display message "data request arranged" "confirmed with: confirmation" in requests(message) step; "missing message: request received" in extract (message)  step; "no data" in processing(data packet) step and so on. but in fact, there are two records in my database test table and DB connection is OK. Even I can extract data from another test oracle database into BW ODS successfully.
       Our BW system has two BW applicaton server and use oracle database. the one application server locates on IBM AIX host. the another one locates on one NT server. the application server on NT server is used for data extration from MS SQL SERVER  database into BW oracle database. and MS SQL SERVER and NT platform application server locate on same one host. DBSL was installed on the NT application server already. and DB connector also was created successfully for MS SQL SERVER and datasource also was generated. DBSL type is Kernel640-WIN-IA32bit-unicode. my BW system is ECC5.0/UNICODE/ORACLE. all table/view/field name of MS SQL server is upcase and have not any specific character. for example: ZDEMO etc.
    wait your help.
    Thanks in advance.
    Billy

    Hi  Ravi,
    Could you help me to get knowledge about the followings:
    approximately how many records    extracting and transfering  from SAP R/3 to BIW  in an organisation. for that how much time  will take .
    How to extract data from  two are three source system  to BIW. Kindly help me with step by step explanation .If any screen shots with documents pls fwd to my ID. "[email protected]"
    Your help highly appreciated.
    Thanks.
    Hema

  • Can not get data from database

    hi all,
        there is a problem ,  when i write like below :
    SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
              WHERE bukrs = p_bukrs
                AND hkont = p_hkont.
    p_bukrs , p_hkont are all on the selection screen , and p_bukrs = 1200 another is eq blank. i can not find any data , but with the same condition i can find some data in database , when i debeg i found that p_hkont is initial.
        when i write like this :
    SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
              WHERE bukrs = p_bukrs .
    this time i can find the data like the database.
        so , does someone know where the problem is , why i can not get data ?
    kind regards
    kevin

    hi,
    if u r  using bukrs and hkont as parameters in selection screen then
    SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
    WHERE bukrs = p_bukrs
    AND hkont = p_hkont.
    this will work.
    if u r using then as select-option then the above does n't work.
    bcoz select-options work as internal table bcoz of that u have use the query like this
    SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
    WHERE bukrs IN p_bukrs
    AND hkont IN p_hkont.
    <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
    Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM

  • 've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    iPhones require a SIM for activation.
    Put the device in DFU mode (google it) and restore via iTunes.

  • I can not synchronize data from the prelude livelog

    I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
    The Prelude can not apply metadata in it.
    please can someone help me

    Hi -
    When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
    We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
    Michael

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • How can I POST data within the same page if I have a A HREF -tag as input?

    How can I POST data within the same page if I have a <A HREF>-tag as input? I want the user to click on a line of text (from a database) and then some data should be posted.

    you can use like this or call javascript fuction and submit the form
    <form method=post action="/mypage">
    cnmsdesign.doc     
    </form>

Maybe you are looking for