Can not create Database-based MDS connection
Hello Dear Oracle Support,
I am trying to use MDS to share some common dvm files. First step, I want to create a database based MDS connection but failed.
My SOA schema is JDEV_SOAINFRA. When I test my Database based MDS connection, I got ORA-01031: insufficient privileges. What privileges I need to grand to MDS schema?
I am using JDEV_MDS as username to establish MDS connection.
Thank you for any suggestion and/or information,
Alena Li
Hello Alena!
If you want to wait the answer from Oracle Support here.. you'll need a lot of patience.
Is the corresponded Database Connection test succeed?
If it also fails that, I think, your JDEV_MDS user (schema) lack of the CONNECT privilege.
A question to you - how did you created this schema?
You should use RCU to create the schemes for SOA Suite (and other Oracle Middleware).
The RCU creates the schemes with all necessary structures (tables) and grants.
Hope this helps,
Oleg
Similar Messages
-
OWB can not create database link
Hello!
We use OWB 10.1. We are unable to create database link in the owb as a source for metadata information. The database user we use to connect to the owb have got the right to create database links and the same user can create database links outside the owb. we get the error message
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
the database user is not the owner of the repository. if we use the repository owner to create the database link it works.
it is also impossible to use a database link, that is created outside the owb, if we use an user that is not the repository owner.
the error message is:
java.sql.SQLException: ORA-02019: connection description for remote database not found
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:158) ....
with the owner everything works fine.
Regards Alexhi,
If public dblink is a problem then u can create the table with PUBLIC SYNONYM and create a synonym of the table in ur DB so that u can access the table in ur DB and still make I/U/D in the table in the other DB. We just have to grant previlege for the synonym created for DML statements.
Regards
Bharath -
Can not create template based page with customized page type.
I built a customized page type (with persepective attribute) and wanted to build pages with this type. If the new pages do not based on any template, it works fine. However, if I wanted to use a template, the page type was set back to "standard"!
Steps to reproduce it:
1. create a new page type - test page type.
2. create a new template = test template.
3. create a new page - test page.
3.1 choose the page type to be "test page type"
3.2 fill in the form including the new attribute info.
3.2 choose the page template to be 'test template"
3.3 click finish
4. click the properties of "test page", it shows that the page type is "standard" and the new attribute information is gone!
If in step 3.2, no template is chosen, the properties of the new page shows the page type is "test page type".
I tried to find a workaround.
1. create a page with "test page type".
2. covert the new page to template.
I got this error message:
Error while copying page. (WWC-44262)
(WWC-00000)
Looks like customized page type and template can not coexist. Is this a bug?How long should the upgrade take? And should it be attempted on a production (infrastructure on machine 1/middle-tier on machine 2) Windows 2000 architecture? Or should be wait for 9.0.4? Or ... should I ask this in a TAR? Thanks!
Mike -
I buy a solaris8 10/00 and install it on Intel PIII 633 MHz 320MB of RAM and 10GB Harddisk. and I try to install Oracle8i 8.1.6 Intel Platform.
After installing, I use "dbassist" for creating a database. In the step of creating an "Initialize File".
There is an error "ORA-01034" then I ignore. so there is another error "ORA-01012". I search in the directory that I store a database but there is no control file.
When I try to start oracle, It reported the error "ORA-27102 Out of memory" and "Error 22 Invalid argument ".
Do you have any suggestion for my situation?
thanks a lotsHi,
I don't have precise answer to your problem.
But I can make some wild guesses:
1. If you have done a "typical" installation, it automatically creates a database.
Now, you will have to do the follwing:
a. login as oracle
b. type "$ORACLE_HOME/bin/svrmgrl"
c. type "connect internal"
d. type "startup" without any argument.
If it opens the database, it's fine. If not, there is some problem in the starting of the instance itself.
I mean, the first step it does is to start an instance and start background processes.
2. Is the listener process start without any problem?
That is,
If you type
"$ORACLE_HOME/bin/lsnrctl"
"start"
it should start the listener process without throwing error messages.
3. Have you configured tnsnames.ora file?
Pl. keep me posted abt latest updates.
Thanks,
Raghu. -
when i install primaver client application, it install oracle XE but when should create the data bases installation failed, why?????????
ERROR: " Oracle XE P6 Professional database Creation failed. Please see the log file at C:\Document and Settings\Administrator for details."
LOG Files:
<08.21.2013 07:20:14> [INFO] [2013-08-21 07:20:14] Calling Perform Action
<08.21.2013 07:44:26> [INFO] [2013-08-21 07:44:26] Calling Perform Action
<08.21.2013 08:04:27> [INFO] [2013-08-21 08:04:27] Calling Perform Action
<08.21.2013 10:25:43> [INFO] [2013-08-21 10:25:43] Calling Perform Action
after installation failed i can run and connect to oracle database with user: "system" and password: "**********", but when i want to setup database by "dbsetup" batch file and enter the inforamation required to
connection information one error appear with this issue : "SQLException: Locale not recognized"
please help me, thank you
Message was edited by: a5cf350d-5b24-4c54-b68b-fcbc19e21d34Hi,
It sounds like you have run into a pretty common problem of installing the application from inside the zip file.
I would recommend uninstalling both P6 and Oracle XE, then make sure you unzip the install files before running the setup.exe application again
Make sure you use setup.exe and not P6-professional.msi as it will not install the per-requisites like java that it needs to create the database.
Regards
Alex -
Can not create the connection in the enrironment!!
hello,every one:
please see the following code:
Environment *env = Environment::createEnvironment(Environment::OBJECT);
Connection *conn = env->createConnection(userName,password,connectString);
try
//use the conn
catch (SQLException &ex)
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
throw;//re-throw
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
Environment *ev = Environment::createEnvironment(Environment::OBJECT);
//the program stopped here,display i can not create the new connection
Connection *cn = ev->createConnection(userName,password,connectString);
ev->terminateConnection(cn);
Environment::terminateEnvironment(ev);
I have terminated the connection and the environment,then why I can not create the
connection in the new environment?
I have tried several times,if you connect the same database as the former,then it
does not work,but if you connect a new database ,it can create the new connection!
plus:I don't want to use conection pool .
Can I have some method to solve the problem?
Please help me!
Thanks a lot in advance!
tony from ChinaHi Tony,
This similar sample works perfectly fine for me. Can you
retry with this?
#include <iostream>
#include <occi.h>
using namespace std;
using namespace oracle::occi;
int main()
Environment *env = Environment::createEnvironment(Environment::OBJECT);
Connection *conn = env->createConnection("scott","tiger","inst1");
try
//use the conn
catch (SQLException &ex)
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
cout<<ex.getMessage();
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
Connection *cn;
Environment *ev;
try{
ev = Environment::createEnvironment(Environment::OBJECT);
cn = ev->createConnection("scott","tiger","inst1");
catch (SQLException &ex)
ev->terminateConnection(cn);
Environment::terminateEnvironment(ev);
cout<<ex.getMessage();
ev->terminateConnection(cn);
Environment::terminateEnvironment(ev);
}Rgds
Amogh -
Can not create directory error while creating database
i am creating database using dbca in oel but when i try to do so i get an error saying can not create directory pawii
and pawii is the sid
actually oracle is installed on u01 and i am creating database in u02
but this error is not allowing me to create database but when i try to create database in uo1 the database installed successfully but this is not happening when i try to create database in another mount point u02987018 wrote:
so finally i had solved the problem myself as people like rukbat are very unhelpful in nature here
all we had to do is we had to change the group of the folder to oracle and oinstall where we are going to create our new database :)Actually he tries to be quite helpful. But sometimes the help you need isn't the help you want.
"When you need me but do not want me, then I must stay. When you want me but no longer need me, then I have to go." (Nanny McPhee) -
Admin Tool can not create any new database or model [nqserror 46131]
Hi everyone!
I can not create anything new in each layer on the admin tool. It marks unknown error.
When I try to import metadata it send the message: [nqserror 46131] unresolved hostname, everything in online mode. I can modify everything offline, then replace the rpd and I can create reports in Answers. But I need to do all of these online mode.
Everything else works well (Answers, Dashboards, Publisher). The server name is correctly put in the instanceconfig.xml.
OBIEE Version: 11.1.1.6.0 (upgrade recently from 11.1.1.5). The scheduler does not start since migration.
Server OS: Red hat enterprise edition
Regards,
Edgar Tercero
Edited by: 958457 on 11-sep-2012 12:04
Edited by: 958457 on 11-sep-2012 14:13Thanks but it not solve my problem.
I detect no problem in my enviroment variables in the bi-init.sh
This is what my admin tool log says:
[OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 690] [nQSError: 43113] Message returned from OBIS. [[
[nQSError: 46131] Unresolved host name: vrnmobiee. Could not get details about the specified host]] -
ORA-01180: can not create datafile 1 during RMAN restore.
Hello,
I am trying to refresh one of our QA environments and I am getting this error message:
RMAN> run
2> {
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> restore database;
6> recover database;
7> }
allocated channel: c1
channel c1: SID=5 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 08-NOV-12
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2012 16:27:40
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
RMAN> shutdown immediate
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 534462464 bytes
Fixed Size 2228200 bytes
Variable Size 176160792 bytes
Database Buffers 348127232 bytes
Redo Buffers 7946240 bytes
RMAN> set dbid=3573460394
executing command: SET DBID
RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
Starting restore at 08-NOV-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
+output file name=+DATA1/alephpr/controlfile/current.260.798747585+
+output file name=+FLASH/alephpr/controlfile/current.276.798747585+
Finished restore at 08-NOV-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
RMAN> crosscheck backup;
Crosschecked 48 objects
RMAN> delete noprompt expired backup;
Deleted 48 EXPIRED objects
RMAN> list backup summary;
specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
RMAN> catalog start with '/restorealeph/';
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
4097 B F A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
4098 B A A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4097 Full 178.04G DISK 00:00:00 07-NOV-12
BP Key: 4097 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9cnpm51u_1_1
List of Datafiles in backup set 4097
File LV Type Ckp SCN Ckp Time Name
1 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
2 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
3 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
4 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
5 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
6 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
7 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
8 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
9 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
10 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
11 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
12 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
13 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
14 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
15 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
16 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
17 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
18 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
19 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
26 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
27 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
28 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
29 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
30 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
31 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
BS Key Size Device Type Elapsed Time Completion Time
4098 16.89G DISK 00:00:00 07-NOV-12
BP Key: 4098 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9enpm6lj_1_1
List of Archived Logs in backup set 4098
Thrd Seq Low SCN Low Time Next SCN Next Time
1 35722 6919870864350 06-NOV-12 6919871887697 06-NOV-12
1 35723 6919871887697 06-NOV-12 6919872372211 06-NOV-12
1 35724 6919872372211 06-NOV-12 6919872410158 06-NOV-12
1 35725 6919872410158 06-NOV-12 6919872447301 06-NOV-12
1 35726 6919872447301 06-NOV-12 6919872503332 06-NOV-12
1 35727 6919872503332 06-NOV-12 6919872551564 06-NOV-12
1 35728 6919872551564 06-NOV-12 6919872603881 06-NOV-12
1 35729 6919872603881 06-NOV-12 6919872655942 06-NOV-12
1 35730 6919872655942 06-NOV-12 6919872698722 06-NOV-12
1 35731 6919872698722 06-NOV-12 6919872741655 06-NOV-12
1 35732 6919872741655 06-NOV-12 6919872782284 06-NOV-12
1 35733 6919872782284 06-NOV-12 6919872872302 06-NOV-12
1 35734 6919872872302 06-NOV-12 6919872910206 06-NOV-12
1 35735 6919872910206 06-NOV-12 6919872945577 06-NOV-12
1 35736 6919872945577 06-NOV-12 6919872980056 06-NOV-12
1 35737 6919872980056 06-NOV-12 6919873013411 06-NOV-12
1 35738 6919873013411 06-NOV-12 6919873050761 06-NOV-12
1 35739 6919873050761 06-NOV-12 6919873084996 06-NOV-12
1 35740 6919873084996 06-NOV-12 6919873122049 06-NOV-12
1 35741 6919873122049 06-NOV-12 6919873521767 06-NOV-12
1 35742 6919873521767 06-NOV-12 6919873952773 06-NOV-12
1 35743 6919873952773 06-NOV-12 6919874258549 06-NOV-12
1 35744 6919874258549 06-NOV-12 6919874472213 06-NOV-12
1 35745 6919874472213 06-NOV-12 6919874744856 06-NOV-12
1 35746 6919874744856 06-NOV-12 6919875113086 06-NOV-12
1 35747 6919875113086 06-NOV-12 6919875733337 06-NOV-12
1 35748 6919875733337 06-NOV-12 6919876139061 06-NOV-12
1 35749 6919876139061 06-NOV-12 6919876707162 06-NOV-12
1 35750 6919876707162 06-NOV-12 6919877706313 06-NOV-12
1 35751 6919877706313 06-NOV-12 6919877919039 06-NOV-12
1 35752 6919877919039 06-NOV-12 6919878024429 06-NOV-12
1 35753 6919878024429 06-NOV-12 6919878107673 06-NOV-12
1 35754 6919878107673 06-NOV-12 6919878258511 06-NOV-12
1 35755 6919878258511 06-NOV-12 6919878308336 06-NOV-12
1 35756 6919878308336 06-NOV-12 6919878424419 06-NOV-12
1 35757 6919878424419 06-NOV-12 6919878488485 06-NOV-12
1 35758 6919878488485 06-NOV-12 6919878827092 06-NOV-12
1 35759 6919878827092 06-NOV-12 6919879350098 07-NOV-12
1 35760 6919879350098 07-NOV-12 6919879675556 07-NOV-12
2 35949 6919870864360 06-NOV-12 6919871494640 06-NOV-12
2 35950 6919871494640 06-NOV-12 6919871887487 06-NOV-12
2 35951 6919871887487 06-NOV-12 6919872410655 06-NOV-12
2 35952 6919872410655 06-NOV-12 6919872552468 06-NOV-12
2 35953 6919872552468 06-NOV-12 6919872698940 06-NOV-12
2 35954 6919872698940 06-NOV-12 6919872872690 06-NOV-12
2 35955 6919872872690 06-NOV-12 6919872980371 06-NOV-12
2 35956 6919872980371 06-NOV-12 6919873085902 06-NOV-12
2 35957 6919873085902 06-NOV-12 6919873569082 06-NOV-12
2 35958 6919873569082 06-NOV-12 6919873949096 06-NOV-12
2 35959 6919873949096 06-NOV-12 6919874404640 06-NOV-12
2 35960 6919874404640 06-NOV-12 6919875011814 06-NOV-12
2 35961 6919875011814 06-NOV-12 6919875631429 06-NOV-12
2 35962 6919875631429 06-NOV-12 6919876324885 06-NOV-12
2 35963 6919876324885 06-NOV-12 6919876363526 06-NOV-12
2 35964 6919876363526 06-NOV-12 6919876748508 06-NOV-12
2 35965 6919876748508 06-NOV-12 6919877741784 06-NOV-12
2 35966 6919877741784 06-NOV-12 6919878108943 06-NOV-12
2 35967 6919878108943 06-NOV-12 6919878424477 06-NOV-12
2 35968 6919878424477 06-NOV-12 6919879012111 06-NOV-12
2 35969 6919879012111 06-NOV-12 6919879260589 07-NOV-12
2 35970 6919879260589 07-NOV-12 6919879350086 07-NOV-12
2 35971 6919879350086 07-NOV-12 6919879464935 07-NOV-12
2 35972 6919879464935 07-NOV-12 6919879548399 07-NOV-12
2 35973 6919879548399 07-NOV-12 6919879675564 07-NOV-12
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ALEPHPR 3573460394 PARENT 1 13-MAY-10
2 2 ALEPHPR 3573460394 PARENT 2229467 28-JUN-10
3 3 ALEPHPR 3573460394 CURRENT 6918261828355 26-SEP-12The ASM structure is created...
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
ASMCMD> cd DATA1/ALEPHPR/DATAFILE
ASMCMD> pwd
+DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
Any idea?
Thanks
Martin
Edited by: martin.morono on Nov 8, 2012 11:19 AM
Edited by: martin.morono on Nov 8, 2012 11:49 AMThanks Levi,
I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
No luck. The error message is different but the result is the same... it keeps failing.
RMAN> run {
2> allocate channel c1 device type disk;
3> allocate channel c2 device type disk;
4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
5> startup mount;
6> catalog start with '/restorealeph/';
7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
8> }
allocated channel: c1
channel c1: SID=191 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 09 NOV 2012 13:11:09
channel c2: skipped, AUTOBACKUP already found
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:15
output file name=+DATA1/alephpr/controlfile/current.260.798747585
output file name=+FLASH/alephpr/controlfile/current.276.798747585
Finished restore at 09 NOV 2012 13:11:24
database is already started
database mounted
Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
Crosschecked 52 objects
Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
Crosschecked 2 objects
Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YEs
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Starting restore at 09 NOV 2012 13:11:48
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/09/2012 13:11:48
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
THanks again for your help.
Regards.
Martin
Edited by: martin.morono on Nov 9, 2012 7:21 AM -
Mail V3.1 can not create a new Cablevision Optimum Online mail account
Apple Technical support asked me to report this on this forum.
I have OS X 10.5.1 with Mail 3.1. My ISP is Cablevision Optimum Online, which uses mail.optonline.net as their POP and SMTP servers.
Pre-existing mail accounts, created under 10.4.x (Tiger) work perfectly. I am unable to create a new mail account with this version of the mail program. Mail's Add Account dialog (wizard) hangs as soon as it tries to connect to the mail.optonline.com server. After a long time trying it just says it can not connect to the server. This happens if I choose the new (and default) "Automatically set up account" option or not. It happens on multiple Leopard systems. In other words, when the mail account setup wizard checks for connectivity to the mail.optonline.net POP server, it fails, even though the mail program has no problem interacting with that same server with accounts set up under a previous version.
We brought a MacBook to the Apple store, and the tech. at the genius bar could not get it to work. He said call the ISP. We did that, spent hours with the ISP tech who told me many people are complaining about this. I suspected it was a problem with the way Mail 3.1 was doing its initial connectivity check. Perhaps using an incompatible port (SSL setting perhaps).
After a good nights sleep, I figured out a work-around. I created a dummy GMail account, after it was created I modified it to have my Optonline account specifications, turned off SSL and it worked.
After I had circumvented this problem, someone else that had the same problem found a different resolution. We both also had .mac accounts defind. When they deleted their .Mac account from the mail program, they were able to create a new Optonline.net account. .Mac uses SSL.... interesting.
Thus, it seems that if you have a .Mac account with Mail 3.1 you can not create an Optonline.net account. A bug that I hope Apple fixes quickly.iLounge had some good info on this topic. The KEY INFO in the post was that after you have gotten the account set up you need to turn off your WiFi router (if you have one) to reset it.
http://forums.ilounge.com/showthread.php?t=221752
Here are the details on how Optonline says you set up an account:
Name: type your name here
Address: [email protected]
Description: whatever you want to put here
Incoming Mail Server
Host Name: mail.optonline.net
User Name: xxxxxxxxxx (don't add "@optonline.net" here, but put what goes before it)
Password: your password here
Outgoing Mail Server (SMTP)
Host Name: mail.optonline.net
User Name: xxxxxxxxxx (don't add "@optonline.net" here, but put what goes before it)
Password: your password here
My other settings under the "Advanced" tab look like this...
Deleted Messages
Remove: Never
Incoming Settings:
Use SSL: OFF
Authentication: Password
Delete from Server: Never
Server Port: 110
Outgoing Settings:
Use SSL: OFF
Authentication: Password
Delete from Server: Never
Server Port: 587
===========
This person adds "Oh, one more thing... after you save your account settings, you may need to turn off WIFI, then "power off"... then "power on" turn WIFI back on and try to get mail again after it connects."
============
Based on the information I read here and on iLounge I was able to get Optonline email working.
1) Deleted my Dot Mac mail accounts in Apple Mail
2) Created an Optonline account based on the details above from Optonline in Apple Mail
3) Unplugged my Airport Extreme Base Station, waited 20 seconds, plugged it back in.
4) I was then able to receive mail but not send on the Optonline SMTP server
5) So...I then went back and checked the details on the Optonline account in Apple Mail. Not sure why but the SSL/authentication selections were changed. So I set them correctly based on the information above and saved. That worked and I was able to send email.
As you are having trouble with Apple Mail and Optonline (why else would you be reading this?) let me also mention that Optonline blocks Port 25 for outbound email so if you have non-Optimum Online email accounts and want to send email on that ISP's server you will not be able to do that unless (a) you pay Cablevision more for a business or boost account (b) use webmail (c) your ISP is willing to provide you with an alternative email port other than 25.
Here is the page from their site on this topic
ort 25 and Optimum Online
Answer
All e-mail sent via the Internet is routed through Port 25, the channel used for communication between an e-mail client and an e-mail server. Activation of Port 25 is currently available with Optimum Online® Boost or Optimum Online for Business. Please continue reading for more information, including activation instructions.
Port 25 Filtering/Blocking
To help control the amount of spam that originates from the Optimum Online network, Optimum Online filters outbound Port 25 e-mail (SMTP) traffic for all standard Optimum Online customers. This filtering is a common spam control measure used by Internet Service Providers. It not only prevents spam sent intentionally, but also thwarts computer viruses that let spammers connect to an unsuspecting customer's infected computer and send spam.
This filtering is transparent to the vast majority of our users. However, if you access a non-Optimum Online e-mail service with an e-mail client application (like Outlook Express), or run your own mail server, you may not be able to send and/or receive e-mail.
Port 25 Availability
If you require Port 25 to be active, Optimum Online offers these options:
Subscribe to Optimum Online Boost. Click here for more information.
Businesses can subscribe to Optimum Online for Business or Optimum Online Boost for Business.
Activating Port 25
If you subscribe to Optimum Online Boost, and would like to utilize Port 25, you'll need to activate it. Simply follow these steps:
Log into optimum.net using your Optimum ID and Password.
Click on Optimum Services.
Click Manage from within the Advanced Config section.
Set Port 25 to On and click Submit. Your modem will be rebooted automatically. Once it starts up, Port 25 will be active.
Optimum Online for Business customers who do not subscribe to Optimum Online Boost can call Technical Support at 1-866-575-8000 to have Port 25 activated.
Workarounds for Standard Optimum Online Customers
If Port 25 filtering is affecting your ability to send or receive non-Optimum Online e-mail, here are some options you may choose to pursue:
Contact your e-mail service provider to see if they support alternate connection methods such as VPN or SMTPS.
If available, use your e-mail service provider's WebMail. -
Java.sql.SQLException: can't create statement from closed connection
java.sql.SQLException: can't create statement from closed connection.
at com.caucho.sql.QPooledConnectionImpl.prepareStatement(QPooledConnecti onImpl.java:411)
I am getting this error with my JSP's, i am running on Resin on Win2k, and MySql as backend.
Has anyone else also faced this issue ?
Looking for someone to help me to solve this issue.
rcLooking for someone to help me to solve this issue.Maybe you are closing the connections. You might want to verify that you are not doing that. Or if you are that that is the correct way to return the connection to the pool.
Or you could have stale connections. Some databases will time out connections if the connection is no used in a while. (This is a good thing.) But this means connection pools must do something with connections that are not used for a while. The pools usually have a configuration option(s) which allows you to set up a keep alive message which keeps the database from closing the connection. -
Can't create database link when password has special character
I'm trying to execute the following statement within sqlplus
create database link alpha connect to scott identified by tiger! using 'db_alpha'
note that the password for the account has an exclamation point in it. the command fails. I've tried placing the password in quotes (') and double-quotes ("). The double-quotes work, but then the link fails to function properly.
We are required to have a special character in our passwords... so how do I get that special character into the password for the database link?
Thanks in advance,
Darrenfor some weird reason, I can't post the reply I want. every time I try, the forum hangs and doesn't save the message. give me a sec...
I have put the password within double quotes... so I'm starting to think the problem is something else. I've been reading other posts regarding creating database links and I've obtained limited results. Here's what I've done, and the results I'm getting.
(names changed to protect the innocent)
My oracle database is on SYSA. I'm on SYSB. I set my TWO_TASK=SYSA and just use sqlplus to connect as user1.
I want to run a command on user2's tables. Normally I would just grant read access to user1 on user2's tables and use a command like
nert spaces to get this to save (weird forum bug here, I can't delete the text to the left)
SQL> sel{color:black}{color}ect * fr{color:black}{color}om u{color:black}{color}s{color:black}{color}e{color:black}{color}r{color:black}{color}2{color:black}{color}.{color:black}{color}m{color:black}{color}y{color:black}{color}_{color:black}{color}t{color:black}{color}a{color:black}{color}b{color:black}{color}l{color:black}{color}e{color:black}{color};
However, user2 is for test data and those tables get dropped and recreated often and it is cumbersome to try to remind everyone to recreate the grants. So I can't trust that user1 will have access to user2's tables. So my goal with the database link is to create a private (for user1 only) database link and access the tables that way, that way I bypass the grant issue. This works out better for me because we only change that password every 2 months. I just recreate the database link once every two months, rather than recreate grants multiple times every week. Well, that's the theory anyway.
Back to creating the database link, I thought my issue was the special character in the password because if I remove the exclamation point everyting works (except that the password is invalid). Below is what it looks like when I do this...
Attempt #1:
SQL> create database link BLAH connect to user2 identified by "tiger" using 'BLAH';
Database link created
SQL> sel{color:black}{color}ect * fr{color:black}{color}om my{color:black}{color}_{color:black}{color}table{color:black}{color}@{color:black}{color}BLAH;
sel{color:black}{color}ect * fr{color:black}{color}om my{color:black}{color}_{color:black}{color}ta{color:black}{color}ble{color:black}{color}@{color:black}{color}BLAH
ERROR at line 1:
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from BLAH
So that looks like it's just a password issue. If I put in the correct password... the error changes to this...
Attempt #2:
SQL> create database link BLAH connect to user2 identified by "tiger!" using 'BLAH';
Database link created
SQL> sel{color:black}{color}ect {color:black}{color}* fr{color:black}{color}om my{color:black}{color}_{color:black}{color}table{color:black}{color}@BLAH;
sel{color:black}{color}ect * fr{color:black}{color}om my{color:black}{color}_ta{color:black}{color}ble{color:black}{color}@BLAH
ERROR at line 1:
ORA-02085: database link BLAH.AAA.BB.CCC.DDD connects to
DEVDB.AAA.BB.CCC.DDD
To me, that doesn't make sense. If the link isn't working... how did it get the "invalid username/password" in Attempt #1?
Anyway, in perusing other forum posts, one post said to put in the full text from the tnsnames.ora file instead of the alias. So I do a little cut/paste and try this...
Attempt #3:
SQL> create database link BLAH connect to user2 identified by "tiger!" using
2 '(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = server001.aaa.bb.ccc.ddd)(PORT = 9999)))
3 (CONNECT_DATA = (SERVICE_NAME = devdb)))';
Database link created.
SQL> sel{color:black}{color}ect {color:black}{color}* fro{color:black}{color}m my{color:black}{color}_{color:black}{color}tab{color:black}{color}le{color:black}{color}@BLAH;
sel{color:black}{color}ect {color:black}{color}* fr{color:black}{color}om {color:black}{color}my_{color:black}{color}tab{color:black}{color}le@B{color:black}{color}LAH
ERROR at line 1:
ORA-02085: database link BLAH.AAA.BB.CCC.DDD connects to
DEVDB.AAA.BB.CCC.DDD
Any ideas on what I'm doing wrong?
Darren -
Peoplesoft HRMSCS 9.0 script did not create database
Hi :
i am working on peoplesoft HRMS module and i was install peoplesoft on windows xp and other software install one by one list given below
1- oracle 10g on D:\ drive with oracle folder
2- create database D:\ drive with oradata folder
3- install BEA Web logic install in C:\ drive
4- install Tuxedo 9.1 on window install in C:\ drive
5- install peopletool 8.49 install into D:\ drive PT8.49 folder
6- install installing peoplesoft enterprise HRMS and Campus Solution 9.0 same folder where peopletool install
7- leave the Multi Language because it is optional.
8-Running DataBase Script ( set data base script as give into manual)
a-utlspace.sql( run script accordingly given manual) message showed synonym created Grant succeeded view created
b-dbowner.sql(message showed,(ORA-00959) ' PSDefault ' does no exist
other remaining script files are in pending, PSDEFAULT is main that can not create how to create this PSDEFAULT
Please help me to run theses script
Thanks
SamiullahHi hi:
i run scripts that you given to me but at the end i face this error:
Tablespace created.
SQL> REM * Create a tablespace for database users default tablespace.
SQL> REM *
SQL> CREATE TABLESPACE PSDEFAULT
2 DATAFILE D:\oradata\HRCS9\psdefault.dbf SIZE 100M
3 EXTENT MANAGEMENT LOCAL AUTOALLOCATE
4 SEGMENT SPACE MANAGEMENT AUTO
5 ;
DATAFILE D:\oradata\HRCS9\psdefault.dbf SIZE 100M
ERROR at line 2:
ORA-02236: invalid file name
script is run but PSDEFULT not exist.
this is log file
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2013-07-26 10:56:03.187: [ OCROSD][1916]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.
2013-07-26 10:56:03.187: [ OCRRAW][1916]proprinit: Could not open raw device
2013-07-26 10:56:03.203: [ default][1916]a_init:7!: Backend init unsuccessful : [33]
2013-07-26 10:56:03.203: [ CSSCLNT][1916]clsssinit: error(33 ) in OCR initialization
after utlspace.sql script i run dbowner.sql script but this script tell PSDEFAULT not exist...
SQL> set echo on
SQL> spool dbowner.log
SQL>
SQL> GRANT CONNECT, RESOURCE, DBA TO PS IDENTIFIED BY PS;
Grant succeeded.
SQL> CONNECT PS/PS;
Connected.
SQL> CREATE TABLE PSDBOWNER (DBNAME VARCHAR2(8) NOT NULL, OWNERID VARCHAR2(8) NOT NULL ) TABLESPACE
CREATE TABLE PSDBOWNER (DBNAME VARCHAR2(8) NOT NULL, OWNERID VARCHAR2(8) NOT NULL ) TABLESPACE PSDEF
ERROR at line 1:
ORA-00959: tablespace 'PSDEFAULT' does not exist
SQL> CREATE UNIQUE INDEX PS_PSDBOWNER ON PSDBOWNER (DBNAME) TABLESPACE PSDEFAULT;
CREATE UNIQUE INDEX PS_PSDBOWNER ON PSDBOWNER (DBNAME) TABLESPACE PSDEFAULT
ERROR at line 1:
ORA-01775: looping chain of synonyms
SQL> CREATE PUBLIC SYNONYM PSDBOWNER FOR PSDBOWNER;
CREATE PUBLIC SYNONYM PSDBOWNER FOR PSDBOWNER
ERROR at line 1:
ORA-00955: name is already used by an existing object
SQL> GRANT SELECT ON PSDBOWNER TO PUBLIC;
GRANT SELECT ON PSDBOWNER TO PUBLIC
ERROR at line 1:
ORA-01775: looping chain of synonyms
SQL> CONNECT SYSTEM/MANAGER;
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to ORACLE.
SQL> REVOKE CONNECT, RESOURCE, DBA FROM PS;
SP2-0640: Not connected
SQL>
SQL> spool off
this is dbowner file
-- ORACLE CONFIDENTIAL. For authorized use only. Except for as
-- expressly authorized by Oracle, do not disclose, copy, reproduce,
-- distribute, or modify.
set echo on
spool dbowner.log
GRANT CONNECT, RESOURCE, DBA TO PS IDENTIFIED BY PS;
CONNECT PS/PS;
CREATE TABLE PSDBOWNER (DBNAME VARCHAR2(8) NOT NULL, OWNERID VARCHAR2(8) NOT NULL ) TABLESPACE PSDEFAULT;
CREATE UNIQUE INDEX PS_PSDBOWNER ON PSDBOWNER (DBNAME) TABLESPACE PSDEFAULT;
CREATE PUBLIC SYNONYM PSDBOWNER FOR PSDBOWNER;
GRANT SELECT ON PSDBOWNER TO PUBLIC;
CONNECT SYSTEM/MANAGER;
REVOKE CONNECT, RESOURCE, DBA FROM PS;
spool off
Please Check it
Thanks -
How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)The question would be more appropriate in the Mac forums as it is not really related to the iPhone.
-
We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......
Maybe you are looking for
-
When I bought my Macbook Air in 2011, ( leopard on purchase - now mountain lion) I discovered how to close open Finder windows by double clicking at the top of the window. I have just bought an iMac (mountain lion) and for the life of me cant find ou
-
How to access shared volume (AFP) thru NAT firewall for 2 or more Macs?
Problem: I need to selectively access either of two macs on remote network, thru NAT router/switch, for file sharing from the remotes. I'm in Oregon; computers are in Hawaii on other side of a new Netgear wired router that works perfectly so far for
-
IMovie won't export to iDVD...why?
I have a project in iMovie 9.0.9 and I want to send it to iDVD to burn a disk. It worked fine on another project last week and now it doesn't. iDVD opens, but nothing is there. I can't find the converted project. Where does it get saved? Do I ha
-
Installing Acrobat 9 on a new computer
I have the disk with serial number for acrobat 9 standard (presently installed on my old computer). After installing on the new computer, it says this disk is for an upgrade from Acrobat 6 (it is) and asks for the serial number for that product - wh
-
Speaker has stopped working HP Pavilion g6 Notebook PC
I bought this laptop a few months ago and one of the speaker has stopped working. The laptop also heats up alot and makes noise. My laptop is still on its warrenty but I dont know how to contact HP for repair. I have tried reporting on the HP faceboo