Can not create event in workflow
Hi Experts,
I created a work flow. And assign a start event 'Submit' to it. This event is in oblect type Z. And when I create a document on webdynpro, i call SAP_WAPI_CREATE_EVENT to create 'SUBMIT'. The work flow is triggered.
But when approve the doc on webdynpro call SAP_WAPI_CREATE_EVENT to create event APPROVED. It does not work.
Why?
Event trace message is: Event APPROVED for task WS99900001 not defined as start/end event
The work flow is like this:
Start event 'SUBMIT' --> STEP send mail to approver --> Wait 'APPROVED'
Thank you in advance.
Richard
Hello,
What if you try to create the APPROVE event using SWUE?
I assume you are creating the event with the same key as for the SUBMIT event.
As always, try SWU_OBUF.
I've encountered that message before, never did find a reason for it. Please keep us informed how it eventually gets fixed.
regards
Rick Bakker
Hanabi Technology
Similar Messages
-
This is somewhat similar to the other HDD postings but on mine I see the drive and can select it but it will not allow me to create events.
This is a new computer that I just picked. At first when I installed FCPX I could not create events so I brought it back to my local Apple reseller who had just sold me a custom configured Macbook Pro. They could not figure it out but when 10.6.8 was release they installed it and it appeared to fix the FCPX problems.
However after using it for an hour I got an error with one of my events, the clips were red with a yellow triangle. This problem was limited to this event so I continue to create new events and import clips, once I decided that the problem appears to be resolved I decided I would delete all of the work and setup FCPX to begin my work. I then shutdown the computer and when I started it backup to my surprised I can no longer create events on my second drive.
I have check permissions and verified the drive is a Mac OS Journaled disk. I have deleted FCPX, reinstalled it, re-formated the drive but I still have the problem. The only thing that appears strange to me is in the Event Library FCPX lists my two drives as follows: Macintosh SSD(with a picture of a house), STORAGE (with a picture of a diskdrive). Now in the Project Library the same drives are listed in the same order however the Macintosh SSD picture is now a drive and the STORAGE now has a picture of a house. It changed the pictures.
Here is my configuration of my computer:
-13" Macbook Pro.
- The DVD was removed and the 500GB Apple SATA drive was installed in the space the DVD once occupied to be used as a scratch disk.
- The OS was installed on a 120GB SSD that was installed inside the Macbook Pro.
I have tried connecting a USB drive and that works.
Every other application works fine but since I only purchased this computer for FCPX and chose this configuration based on the Apple reseller who know that my sole intention for this computer was running FCPX. I would not have purchased it if I know FCPX would not work.
Any suggestions please let me knowHello,
What if you try to create the APPROVE event using SWUE?
I assume you are creating the event with the same key as for the SUBMIT event.
As always, try SWU_OBUF.
I've encountered that message before, never did find a reason for it. Please keep us informed how it eventually gets fixed.
regards
Rick Bakker
Hanabi Technology -
I have 55,000 images organized into about 1700 events. The only reasonable way to view my library is using events in iPhoto where each event has one image That still leaves 1700 images to sort through but that is a lot easier than 55,000 images. In the side bar is a folder with "iPhoto Events" but those views still show all of the slides. How can I create events and view my photos as events as in iPhoto? Events are critical for large libraries and has been my primary way to sort images.
Thanks!I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) . I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
Haha! I should have paid attention and read between the lines! My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do! I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy. I am now going through Photos and making Albums (of what used to be in my Events) ... maybe I'll get this finished before they do another non user friendly update! -
I'm a system administrator at a school. Currently I'm in the process of testing iMovie 08, as we've purchased the 3 year maintenance plan.
When trying to import from a DV deck I'm given the error
Can't Create Event
The import was canceled. You may not have permission to write to /Volumes/Storage/iMovie Events.localized.
Indeed, I can't write to the root of /Volumes/Storage, the student test account I'm using doesn't have access. I do however have a "student work" folder that they can write to. Is there any way I can get iMovie to create iMovie Events.localized in this folder rather than on the root of the drive? If not and there isn't a workaround, I guess we'll be sticking to iMovie 6.
Furthermore, the file being created on the root level implies that it is not multi-user aware. Is this right? Can users see each other's libraries? If the answer to either of those is 'yes' than it's not suitable for this environment and we'll be using the older version.
If someone is aware of a "Deploying iMovie 08 in a Managed Setting" document or similar, I'd appreciate the tip!
thanks,Thanks for the quick reply, Lori. Yes the account does have a Movies folder, however there is no iMovie Events folder in there. Just iMovie Projects.
As an update, I manually created the folder /Volumes/Storage/iMovie Events.localized but it still would not work until I gave everybody full access to it. Then it was fine, so at least the error message is accurate. Obviously I can't leave it open wide like that once school starts.
EDIT: Just to be clear about my setup -- and WHY it's set up how it is -- the Movies folder is in the default location relative to the user home folder. The user home is on an XServe. Hence why I'm capturing video to a secondary internal partition (/Volumes/Storage).
Message was edited by: Sean Murphy3 -
IPhone 5s can not add events to calander
Can not add events to calander go through whole process and event never shows up (is not created)
Hello Erock78,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning calendar issues:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Can't create events with times between 10:01 and 19:59
I've recently updated to OSX 10.4.9, and now can't create events with times that start with a '1'. This only seems to be a problem on the day British Summer Time begins on 25 March.
I usually create my events in the month view, and input the start and end times by clicking in the time boxes and typing in the hours and minutes. However when I try to put in a start time of, say, 11:00, it puts in 21:00 instead. The only way around this seems to be to put in a time it will accept, like 09:00, and using the arrow keys to move it to the time I want. Or creating the events in the day view and clicking on the start time there.
Any ideas?Looks like you have found a wee bug. I can replicate it. You could report it though OS X Feedback or better though ADC, but for the latter you have to register first.
I usually create events by double-clicking in week view; often this gets the start time right, but if not then edit the start time in the info pane. Your bug is there with events created in day and week views too.
AK -
Hi,
I am using iMovie 2011, on a Macbook Air late-2012 with Mountain Lion 10.8.2. I can't create events or projects in iMovie. I am getting the following error message :
Can't create event.
The import was canceled. You may not have permission to write to /iMovie Events.localized.
It seems to think that the "iMovie Events" folder is in the System root. In fact, if I create a folder in the system root (bad practice), it works, but then I can't create projects. Creating a folder called "iMovie Projects" in the system root doesn't work because iMovie can't write to the folder. Now, I don't want either of those folders in the system root, I want them in ~/myusername/Movies, like they're supposed to be. I don't know why iMovie thinks they should be in the system root. Is there any way to reset this setting? I have tried deleting iMovie pref files, reinstalling iMovie, etc. but nothing seems to work. Any ideas? Thanks,
C.I would suggest calling Apple at the Contact Us link at the bottom right of this page. Your MBA should be still under warranty, so the call should not cost you anything (but verify).
-
Can not create the connection in the enrironment!!
hello,every one:
please see the following code:
Environment *env = Environment::createEnvironment(Environment::OBJECT);
Connection *conn = env->createConnection(userName,password,connectString);
try
//use the conn
catch (SQLException &ex)
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
throw;//re-throw
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
Environment *ev = Environment::createEnvironment(Environment::OBJECT);
//the program stopped here,display i can not create the new connection
Connection *cn = ev->createConnection(userName,password,connectString);
ev->terminateConnection(cn);
Environment::terminateEnvironment(ev);
I have terminated the connection and the environment,then why I can not create the
connection in the new environment?
I have tried several times,if you connect the same database as the former,then it
does not work,but if you connect a new database ,it can create the new connection!
plus:I don't want to use conection pool .
Can I have some method to solve the problem?
Please help me!
Thanks a lot in advance!
tony from ChinaHi Tony,
This similar sample works perfectly fine for me. Can you
retry with this?
#include <iostream>
#include <occi.h>
using namespace std;
using namespace oracle::occi;
int main()
Environment *env = Environment::createEnvironment(Environment::OBJECT);
Connection *conn = env->createConnection("scott","tiger","inst1");
try
//use the conn
catch (SQLException &ex)
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
cout<<ex.getMessage();
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
Connection *cn;
Environment *ev;
try{
ev = Environment::createEnvironment(Environment::OBJECT);
cn = ev->createConnection("scott","tiger","inst1");
catch (SQLException &ex)
ev->terminateConnection(cn);
Environment::terminateEnvironment(ev);
cout<<ex.getMessage();
ev->terminateConnection(cn);
Environment::terminateEnvironment(ev);
}Rgds
Amogh -
We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look....... -
JMStudio Error "Can not create session manager"
Hi,
I'm trying to transmit an mpg file through a simple pc to pc network, using the transmission wizard in the JMStudio, and everytime it causes a "can not create session manager" error, even when I try to transmit .mp3 file
I'm using an ip like 100.100.0.1 for the sender machine, and 100.100.0.2 for the receiver machine, and I don't know where is the problem
thanks in advanceUm,maybe the port that you use for transmission is already occupied.
Make sure that you are not using JMStudio to transmit streams while trying to receive streams from the same port. -
Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic. -
Can not create recovery discs on satellite C875D-S7330
Can not create recovery discs on satellite C875D-S7330. Drive runs and appears to be doing it thing, then aborts saying it has error to check disc for scratch or dust on media. Error code: OEO1B5-26-2AO3OC 00 . Tried 3 new discs all same results. Tried a 4th disc trying to continue on with disc 2 of recovery discs, got another error on this one. Error code: 020150-20-00000000.
Anyone have a fix for this? Had this machine less than 24hrs.
Thanks
Don B.Personally, I would get a 16gig USB thumb drive and put your recovery on it. It eliminates having to swap disks during recovery and it's easy to store. I've used mine several times and it's worked perfectly every time.
L875D-S7232 (Win 8.1) -
Admin Tool can not create any new database or model [nqserror 46131]
Hi everyone!
I can not create anything new in each layer on the admin tool. It marks unknown error.
When I try to import metadata it send the message: [nqserror 46131] unresolved hostname, everything in online mode. I can modify everything offline, then replace the rpd and I can create reports in Answers. But I need to do all of these online mode.
Everything else works well (Answers, Dashboards, Publisher). The server name is correctly put in the instanceconfig.xml.
OBIEE Version: 11.1.1.6.0 (upgrade recently from 11.1.1.5). The scheduler does not start since migration.
Server OS: Red hat enterprise edition
Regards,
Edgar Tercero
Edited by: 958457 on 11-sep-2012 12:04
Edited by: 958457 on 11-sep-2012 14:13Thanks but it not solve my problem.
I detect no problem in my enviroment variables in the bi-init.sh
This is what my admin tool log says:
[OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 690] [nQSError: 43113] Message returned from OBIS. [[
[nQSError: 46131] Unresolved host name: vrnmobiee. Could not get details about the specified host]] -
ORA-01180: can not create datafile 1 during RMAN restore.
Hello,
I am trying to refresh one of our QA environments and I am getting this error message:
RMAN> run
2> {
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> restore database;
6> recover database;
7> }
allocated channel: c1
channel c1: SID=5 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 08-NOV-12
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2012 16:27:40
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
RMAN> shutdown immediate
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 534462464 bytes
Fixed Size 2228200 bytes
Variable Size 176160792 bytes
Database Buffers 348127232 bytes
Redo Buffers 7946240 bytes
RMAN> set dbid=3573460394
executing command: SET DBID
RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
Starting restore at 08-NOV-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
+output file name=+DATA1/alephpr/controlfile/current.260.798747585+
+output file name=+FLASH/alephpr/controlfile/current.276.798747585+
Finished restore at 08-NOV-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
RMAN> crosscheck backup;
Crosschecked 48 objects
RMAN> delete noprompt expired backup;
Deleted 48 EXPIRED objects
RMAN> list backup summary;
specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
RMAN> catalog start with '/restorealeph/';
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
4097 B F A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
4098 B A A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4097 Full 178.04G DISK 00:00:00 07-NOV-12
BP Key: 4097 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9cnpm51u_1_1
List of Datafiles in backup set 4097
File LV Type Ckp SCN Ckp Time Name
1 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
2 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
3 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
4 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
5 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
6 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
7 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
8 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
9 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
10 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
11 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
12 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
13 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
14 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
15 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
16 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
17 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
18 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
19 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
26 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
27 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
28 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
29 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
30 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
31 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
BS Key Size Device Type Elapsed Time Completion Time
4098 16.89G DISK 00:00:00 07-NOV-12
BP Key: 4098 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9enpm6lj_1_1
List of Archived Logs in backup set 4098
Thrd Seq Low SCN Low Time Next SCN Next Time
1 35722 6919870864350 06-NOV-12 6919871887697 06-NOV-12
1 35723 6919871887697 06-NOV-12 6919872372211 06-NOV-12
1 35724 6919872372211 06-NOV-12 6919872410158 06-NOV-12
1 35725 6919872410158 06-NOV-12 6919872447301 06-NOV-12
1 35726 6919872447301 06-NOV-12 6919872503332 06-NOV-12
1 35727 6919872503332 06-NOV-12 6919872551564 06-NOV-12
1 35728 6919872551564 06-NOV-12 6919872603881 06-NOV-12
1 35729 6919872603881 06-NOV-12 6919872655942 06-NOV-12
1 35730 6919872655942 06-NOV-12 6919872698722 06-NOV-12
1 35731 6919872698722 06-NOV-12 6919872741655 06-NOV-12
1 35732 6919872741655 06-NOV-12 6919872782284 06-NOV-12
1 35733 6919872782284 06-NOV-12 6919872872302 06-NOV-12
1 35734 6919872872302 06-NOV-12 6919872910206 06-NOV-12
1 35735 6919872910206 06-NOV-12 6919872945577 06-NOV-12
1 35736 6919872945577 06-NOV-12 6919872980056 06-NOV-12
1 35737 6919872980056 06-NOV-12 6919873013411 06-NOV-12
1 35738 6919873013411 06-NOV-12 6919873050761 06-NOV-12
1 35739 6919873050761 06-NOV-12 6919873084996 06-NOV-12
1 35740 6919873084996 06-NOV-12 6919873122049 06-NOV-12
1 35741 6919873122049 06-NOV-12 6919873521767 06-NOV-12
1 35742 6919873521767 06-NOV-12 6919873952773 06-NOV-12
1 35743 6919873952773 06-NOV-12 6919874258549 06-NOV-12
1 35744 6919874258549 06-NOV-12 6919874472213 06-NOV-12
1 35745 6919874472213 06-NOV-12 6919874744856 06-NOV-12
1 35746 6919874744856 06-NOV-12 6919875113086 06-NOV-12
1 35747 6919875113086 06-NOV-12 6919875733337 06-NOV-12
1 35748 6919875733337 06-NOV-12 6919876139061 06-NOV-12
1 35749 6919876139061 06-NOV-12 6919876707162 06-NOV-12
1 35750 6919876707162 06-NOV-12 6919877706313 06-NOV-12
1 35751 6919877706313 06-NOV-12 6919877919039 06-NOV-12
1 35752 6919877919039 06-NOV-12 6919878024429 06-NOV-12
1 35753 6919878024429 06-NOV-12 6919878107673 06-NOV-12
1 35754 6919878107673 06-NOV-12 6919878258511 06-NOV-12
1 35755 6919878258511 06-NOV-12 6919878308336 06-NOV-12
1 35756 6919878308336 06-NOV-12 6919878424419 06-NOV-12
1 35757 6919878424419 06-NOV-12 6919878488485 06-NOV-12
1 35758 6919878488485 06-NOV-12 6919878827092 06-NOV-12
1 35759 6919878827092 06-NOV-12 6919879350098 07-NOV-12
1 35760 6919879350098 07-NOV-12 6919879675556 07-NOV-12
2 35949 6919870864360 06-NOV-12 6919871494640 06-NOV-12
2 35950 6919871494640 06-NOV-12 6919871887487 06-NOV-12
2 35951 6919871887487 06-NOV-12 6919872410655 06-NOV-12
2 35952 6919872410655 06-NOV-12 6919872552468 06-NOV-12
2 35953 6919872552468 06-NOV-12 6919872698940 06-NOV-12
2 35954 6919872698940 06-NOV-12 6919872872690 06-NOV-12
2 35955 6919872872690 06-NOV-12 6919872980371 06-NOV-12
2 35956 6919872980371 06-NOV-12 6919873085902 06-NOV-12
2 35957 6919873085902 06-NOV-12 6919873569082 06-NOV-12
2 35958 6919873569082 06-NOV-12 6919873949096 06-NOV-12
2 35959 6919873949096 06-NOV-12 6919874404640 06-NOV-12
2 35960 6919874404640 06-NOV-12 6919875011814 06-NOV-12
2 35961 6919875011814 06-NOV-12 6919875631429 06-NOV-12
2 35962 6919875631429 06-NOV-12 6919876324885 06-NOV-12
2 35963 6919876324885 06-NOV-12 6919876363526 06-NOV-12
2 35964 6919876363526 06-NOV-12 6919876748508 06-NOV-12
2 35965 6919876748508 06-NOV-12 6919877741784 06-NOV-12
2 35966 6919877741784 06-NOV-12 6919878108943 06-NOV-12
2 35967 6919878108943 06-NOV-12 6919878424477 06-NOV-12
2 35968 6919878424477 06-NOV-12 6919879012111 06-NOV-12
2 35969 6919879012111 06-NOV-12 6919879260589 07-NOV-12
2 35970 6919879260589 07-NOV-12 6919879350086 07-NOV-12
2 35971 6919879350086 07-NOV-12 6919879464935 07-NOV-12
2 35972 6919879464935 07-NOV-12 6919879548399 07-NOV-12
2 35973 6919879548399 07-NOV-12 6919879675564 07-NOV-12
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ALEPHPR 3573460394 PARENT 1 13-MAY-10
2 2 ALEPHPR 3573460394 PARENT 2229467 28-JUN-10
3 3 ALEPHPR 3573460394 CURRENT 6918261828355 26-SEP-12The ASM structure is created...
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
ASMCMD> cd DATA1/ALEPHPR/DATAFILE
ASMCMD> pwd
+DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
Any idea?
Thanks
Martin
Edited by: martin.morono on Nov 8, 2012 11:19 AM
Edited by: martin.morono on Nov 8, 2012 11:49 AMThanks Levi,
I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
No luck. The error message is different but the result is the same... it keeps failing.
RMAN> run {
2> allocate channel c1 device type disk;
3> allocate channel c2 device type disk;
4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
5> startup mount;
6> catalog start with '/restorealeph/';
7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
8> }
allocated channel: c1
channel c1: SID=191 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 09 NOV 2012 13:11:09
channel c2: skipped, AUTOBACKUP already found
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:15
output file name=+DATA1/alephpr/controlfile/current.260.798747585
output file name=+FLASH/alephpr/controlfile/current.276.798747585
Finished restore at 09 NOV 2012 13:11:24
database is already started
database mounted
Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
Crosschecked 52 objects
Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
Crosschecked 2 objects
Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YEs
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Starting restore at 09 NOV 2012 13:11:48
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/09/2012 13:11:48
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
THanks again for your help.
Regards.
Martin
Edited by: martin.morono on Nov 9, 2012 7:21 AM -
I can not create a new user account on eprint
i can not create a new user account on eprint. I have been trying for over an hour and it repeats telling me that my email addresses are not entered correctly, however they match. ?
I have tried to create an account via ePrintCenter and it seems that the published application has several flaws in interpreting the provided input.
1) In the Filed for last Name I enter my last name, which consist of only Alph Characters. The form however thinks that there is some sort of special character and rejects my Input.
2) E-Mail address. is not identical; OK, so I do a quick OCR on the E-Mail and guess what they are identical. Again the form Fails to recognize this.
3) Enter a password (2 Fields) and a third is displayed which is marked as "*required" but is not labeled as to what the required info could possibly be. Or is it a 3 password confirmation box, who knows.
All I know is that a simple registration is a major pain with this HP site.
Any Help as to how to alleviate this would of course be greatly appreciated.
Maybe you are looking for
-
8.1.6 installation failed on RH6.2
When I try to launch runInstaller, I see only gray rectangle and no more. In "top" I see 8 or 9 instancies of jre, wich take up to 100% of CPU time. When I append to the jre script option -v (for verbose output) I see messages about loading different
-
Catch an error in inbound ABAP Proxy
Hi, I'm using an ABAP Proxy to file->PI->ECC(proxy) scenario and I found an error in my sxi_monitor on ECC side: <SAP:Stack>Error during proxy processing An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor d
-
Correlating on Directory problem
Dear All, I have some strange problem with correlation. In BPM there is a fork with 2 recieve steps which are recieving filea. If I correlate on Directory every time a new instance of BP is created (even is the files where form the same directory(in
-
I have been able to get Liquid Data up and running. I have set my Output XSD as the target schema I have included my DB and mapped it to the Output XSD I am having problems getting the Input XML into my project. When I include in my XML source (input
-
IBooks Widget Audio Issue (Edge Animate)
Hello, my name is Dominic Redding. I've been working on an HTML5 widget for an iBook (testing via iBooks Author). I've been having an issue that I just can't seem to find a fix for (I've checked through these forums, the Apple forums, and some other