Can not create follow up transaction FS Quotation from Lead in Interaction
Dear All,
We have requirement wherein IC agent should be able create FS Quotation (Transaction type FSO1) from Lead transaction type in WEB UI.
I have made all the necessary cutomization for copy control. FS Quotation is also maintained for all chanel.
Its work fine in CRM Online. I can create FS Quotation from Lead transaction type but in WEB UI when I click on Follow up button from Lead transaction pop will appear but I can not see FS Quotation in pop up window.
What I found after investigation is that transaction type with Financial Contract as Leading business category can not be available for follow up from Lead in web ui but available in CRM online. When I change the leading business category to another one same transaction type can be seen for Follow up from Lead in web ui.
Please let me know if you have any suggestion or faced similar kind of issue.
Regards
Pankaj Vispute
Hello Pankaj,
Yes, I have discovered this behavior as well. It seems to be documented in SAP Note 1172066. Apparently only the four following category classes are allowed:
'A' : Interaction Log
'F' : Appointment
'G' : E-Mail
'H' : Task
Best regards,
John
Similar Messages
-
Can not create follow up transaction FS Quotation from Lead in WEB UI
Dear All,
We have requirement wherein IC agent should be able create FS Quotation (Transaction type FSO1) from Lead transaction type in WEB UI.
I have made all the necessary cutomization for copy control. FS Quotation is also maintained for all chanel.
Its work fine in CRM Online. I can create FS Quotation from Lead transaction type but in WEB UI when I click on Follow up button from Lead transaction pop will appear but I can not see FS Quotation in pop up window.
Please let me know if you have any suggestion or faced similar kind of issue.
Regards
Pankaj VisputeHello Pankaj,
Yes, I have discovered this behavior as well. It seems to be documented in SAP Note 1172066. Apparently only the four following category classes are allowed:
'A' : Interaction Log
'F' : Appointment
'G' : E-Mail
'H' : Task
Best regards,
John -
CO08 can not create Production Order!!!
Dear Experts
We are running an MTO(make to order) scenario!
First we create an contract in the system!Then we create sales order
with reference to this contract!
And when the sales order is sent to the planning department! They use
TCODE:CO08 create production order with reference to the sales order!
But we get an error message as follows:
Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 41033737 and item 000010.
Therefore, the settlement and possibly inventory management are carried out using the number of the
preceding document.
ut when I entered the the contract in Co08 and then I am able to create
the production order.
And when I back to see the detail in the sales order ,I find there is no
value in the account assignment to the profitability segment!!
Why the sales order have no profitability segment??*
Why we can not create production order with reference to sales order??
It seems there are one problem!
Thanks for any reply!!Fei Liu,
The current situation that you have described is pretty standard functionality for most MTO requirements classes. Account assignment is normally to the reference doc, not the 'Release' Sales doc. This includes quotations as well as contracts.
If your business requirement is to instead use the Sales Doc number, and not the Contract number, you can change this by setting OVZG "Account Assignment Consumption" to 'blank'.
http://service.sap.com/sap/support/notes/459734
http://service.sap.com/sap/support/notes/729381
Rgds,
DB49 -
Can not create the connection in the enrironment!!
hello,every one:
please see the following code:
Environment *env = Environment::createEnvironment(Environment::OBJECT);
Connection *conn = env->createConnection(userName,password,connectString);
try
//use the conn
catch (SQLException &ex)
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
throw;//re-throw
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
Environment *ev = Environment::createEnvironment(Environment::OBJECT);
//the program stopped here,display i can not create the new connection
Connection *cn = ev->createConnection(userName,password,connectString);
ev->terminateConnection(cn);
Environment::terminateEnvironment(ev);
I have terminated the connection and the environment,then why I can not create the
connection in the new environment?
I have tried several times,if you connect the same database as the former,then it
does not work,but if you connect a new database ,it can create the new connection!
plus:I don't want to use conection pool .
Can I have some method to solve the problem?
Please help me!
Thanks a lot in advance!
tony from ChinaHi Tony,
This similar sample works perfectly fine for me. Can you
retry with this?
#include <iostream>
#include <occi.h>
using namespace std;
using namespace oracle::occi;
int main()
Environment *env = Environment::createEnvironment(Environment::OBJECT);
Connection *conn = env->createConnection("scott","tiger","inst1");
try
//use the conn
catch (SQLException &ex)
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
cout<<ex.getMessage();
env->terminateConnection(conn);
Environment::terminateEnvironment(env);
Connection *cn;
Environment *ev;
try{
ev = Environment::createEnvironment(Environment::OBJECT);
cn = ev->createConnection("scott","tiger","inst1");
catch (SQLException &ex)
ev->terminateConnection(cn);
Environment::terminateEnvironment(ev);
cout<<ex.getMessage();
ev->terminateConnection(cn);
Environment::terminateEnvironment(ev);
}Rgds
Amogh -
Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic. -
ORA-01180: can not create datafile 1 during RMAN restore.
Hello,
I am trying to refresh one of our QA environments and I am getting this error message:
RMAN> run
2> {
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> restore database;
6> recover database;
7> }
allocated channel: c1
channel c1: SID=5 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 08-NOV-12
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2012 16:27:40
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
RMAN> shutdown immediate
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 534462464 bytes
Fixed Size 2228200 bytes
Variable Size 176160792 bytes
Database Buffers 348127232 bytes
Redo Buffers 7946240 bytes
RMAN> set dbid=3573460394
executing command: SET DBID
RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
Starting restore at 08-NOV-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
+output file name=+DATA1/alephpr/controlfile/current.260.798747585+
+output file name=+FLASH/alephpr/controlfile/current.276.798747585+
Finished restore at 08-NOV-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
RMAN> crosscheck backup;
Crosschecked 48 objects
RMAN> delete noprompt expired backup;
Deleted 48 EXPIRED objects
RMAN> list backup summary;
specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
RMAN> catalog start with '/restorealeph/';
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
4097 B F A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
4098 B A A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4097 Full 178.04G DISK 00:00:00 07-NOV-12
BP Key: 4097 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9cnpm51u_1_1
List of Datafiles in backup set 4097
File LV Type Ckp SCN Ckp Time Name
1 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
2 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
3 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
4 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
5 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
6 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
7 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
8 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
9 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
10 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
11 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
12 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
13 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
14 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
15 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
16 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
17 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
18 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
19 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
26 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
27 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
28 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
29 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
30 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
31 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
BS Key Size Device Type Elapsed Time Completion Time
4098 16.89G DISK 00:00:00 07-NOV-12
BP Key: 4098 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9enpm6lj_1_1
List of Archived Logs in backup set 4098
Thrd Seq Low SCN Low Time Next SCN Next Time
1 35722 6919870864350 06-NOV-12 6919871887697 06-NOV-12
1 35723 6919871887697 06-NOV-12 6919872372211 06-NOV-12
1 35724 6919872372211 06-NOV-12 6919872410158 06-NOV-12
1 35725 6919872410158 06-NOV-12 6919872447301 06-NOV-12
1 35726 6919872447301 06-NOV-12 6919872503332 06-NOV-12
1 35727 6919872503332 06-NOV-12 6919872551564 06-NOV-12
1 35728 6919872551564 06-NOV-12 6919872603881 06-NOV-12
1 35729 6919872603881 06-NOV-12 6919872655942 06-NOV-12
1 35730 6919872655942 06-NOV-12 6919872698722 06-NOV-12
1 35731 6919872698722 06-NOV-12 6919872741655 06-NOV-12
1 35732 6919872741655 06-NOV-12 6919872782284 06-NOV-12
1 35733 6919872782284 06-NOV-12 6919872872302 06-NOV-12
1 35734 6919872872302 06-NOV-12 6919872910206 06-NOV-12
1 35735 6919872910206 06-NOV-12 6919872945577 06-NOV-12
1 35736 6919872945577 06-NOV-12 6919872980056 06-NOV-12
1 35737 6919872980056 06-NOV-12 6919873013411 06-NOV-12
1 35738 6919873013411 06-NOV-12 6919873050761 06-NOV-12
1 35739 6919873050761 06-NOV-12 6919873084996 06-NOV-12
1 35740 6919873084996 06-NOV-12 6919873122049 06-NOV-12
1 35741 6919873122049 06-NOV-12 6919873521767 06-NOV-12
1 35742 6919873521767 06-NOV-12 6919873952773 06-NOV-12
1 35743 6919873952773 06-NOV-12 6919874258549 06-NOV-12
1 35744 6919874258549 06-NOV-12 6919874472213 06-NOV-12
1 35745 6919874472213 06-NOV-12 6919874744856 06-NOV-12
1 35746 6919874744856 06-NOV-12 6919875113086 06-NOV-12
1 35747 6919875113086 06-NOV-12 6919875733337 06-NOV-12
1 35748 6919875733337 06-NOV-12 6919876139061 06-NOV-12
1 35749 6919876139061 06-NOV-12 6919876707162 06-NOV-12
1 35750 6919876707162 06-NOV-12 6919877706313 06-NOV-12
1 35751 6919877706313 06-NOV-12 6919877919039 06-NOV-12
1 35752 6919877919039 06-NOV-12 6919878024429 06-NOV-12
1 35753 6919878024429 06-NOV-12 6919878107673 06-NOV-12
1 35754 6919878107673 06-NOV-12 6919878258511 06-NOV-12
1 35755 6919878258511 06-NOV-12 6919878308336 06-NOV-12
1 35756 6919878308336 06-NOV-12 6919878424419 06-NOV-12
1 35757 6919878424419 06-NOV-12 6919878488485 06-NOV-12
1 35758 6919878488485 06-NOV-12 6919878827092 06-NOV-12
1 35759 6919878827092 06-NOV-12 6919879350098 07-NOV-12
1 35760 6919879350098 07-NOV-12 6919879675556 07-NOV-12
2 35949 6919870864360 06-NOV-12 6919871494640 06-NOV-12
2 35950 6919871494640 06-NOV-12 6919871887487 06-NOV-12
2 35951 6919871887487 06-NOV-12 6919872410655 06-NOV-12
2 35952 6919872410655 06-NOV-12 6919872552468 06-NOV-12
2 35953 6919872552468 06-NOV-12 6919872698940 06-NOV-12
2 35954 6919872698940 06-NOV-12 6919872872690 06-NOV-12
2 35955 6919872872690 06-NOV-12 6919872980371 06-NOV-12
2 35956 6919872980371 06-NOV-12 6919873085902 06-NOV-12
2 35957 6919873085902 06-NOV-12 6919873569082 06-NOV-12
2 35958 6919873569082 06-NOV-12 6919873949096 06-NOV-12
2 35959 6919873949096 06-NOV-12 6919874404640 06-NOV-12
2 35960 6919874404640 06-NOV-12 6919875011814 06-NOV-12
2 35961 6919875011814 06-NOV-12 6919875631429 06-NOV-12
2 35962 6919875631429 06-NOV-12 6919876324885 06-NOV-12
2 35963 6919876324885 06-NOV-12 6919876363526 06-NOV-12
2 35964 6919876363526 06-NOV-12 6919876748508 06-NOV-12
2 35965 6919876748508 06-NOV-12 6919877741784 06-NOV-12
2 35966 6919877741784 06-NOV-12 6919878108943 06-NOV-12
2 35967 6919878108943 06-NOV-12 6919878424477 06-NOV-12
2 35968 6919878424477 06-NOV-12 6919879012111 06-NOV-12
2 35969 6919879012111 06-NOV-12 6919879260589 07-NOV-12
2 35970 6919879260589 07-NOV-12 6919879350086 07-NOV-12
2 35971 6919879350086 07-NOV-12 6919879464935 07-NOV-12
2 35972 6919879464935 07-NOV-12 6919879548399 07-NOV-12
2 35973 6919879548399 07-NOV-12 6919879675564 07-NOV-12
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ALEPHPR 3573460394 PARENT 1 13-MAY-10
2 2 ALEPHPR 3573460394 PARENT 2229467 28-JUN-10
3 3 ALEPHPR 3573460394 CURRENT 6918261828355 26-SEP-12The ASM structure is created...
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
ASMCMD> cd DATA1/ALEPHPR/DATAFILE
ASMCMD> pwd
+DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
Any idea?
Thanks
Martin
Edited by: martin.morono on Nov 8, 2012 11:19 AM
Edited by: martin.morono on Nov 8, 2012 11:49 AMThanks Levi,
I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
No luck. The error message is different but the result is the same... it keeps failing.
RMAN> run {
2> allocate channel c1 device type disk;
3> allocate channel c2 device type disk;
4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
5> startup mount;
6> catalog start with '/restorealeph/';
7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
8> }
allocated channel: c1
channel c1: SID=191 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 09 NOV 2012 13:11:09
channel c2: skipped, AUTOBACKUP already found
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:15
output file name=+DATA1/alephpr/controlfile/current.260.798747585
output file name=+FLASH/alephpr/controlfile/current.276.798747585
Finished restore at 09 NOV 2012 13:11:24
database is already started
database mounted
Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
Crosschecked 52 objects
Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
Crosschecked 2 objects
Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YEs
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Starting restore at 09 NOV 2012 13:11:48
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/09/2012 13:11:48
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
THanks again for your help.
Regards.
Martin
Edited by: martin.morono on Nov 9, 2012 7:21 AM -
Can not create a page in iWeb.
Hi there,
I suddenly can not create a new page with my site on iWeb. I can also not import photos by dragging them over, nor can I create a new site with iWeb!
Last time this happened I quite iWeb then it woudn't open again. I have managed to get my website back but now face the same problem with not being able to create a new page etc!
Any ideas?
SarahTry the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents of the User/Home/Library/Caches/iWeb folder
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT -
Mail V3.1 can not create a new Cablevision Optimum Online mail account
Apple Technical support asked me to report this on this forum.
I have OS X 10.5.1 with Mail 3.1. My ISP is Cablevision Optimum Online, which uses mail.optonline.net as their POP and SMTP servers.
Pre-existing mail accounts, created under 10.4.x (Tiger) work perfectly. I am unable to create a new mail account with this version of the mail program. Mail's Add Account dialog (wizard) hangs as soon as it tries to connect to the mail.optonline.com server. After a long time trying it just says it can not connect to the server. This happens if I choose the new (and default) "Automatically set up account" option or not. It happens on multiple Leopard systems. In other words, when the mail account setup wizard checks for connectivity to the mail.optonline.net POP server, it fails, even though the mail program has no problem interacting with that same server with accounts set up under a previous version.
We brought a MacBook to the Apple store, and the tech. at the genius bar could not get it to work. He said call the ISP. We did that, spent hours with the ISP tech who told me many people are complaining about this. I suspected it was a problem with the way Mail 3.1 was doing its initial connectivity check. Perhaps using an incompatible port (SSL setting perhaps).
After a good nights sleep, I figured out a work-around. I created a dummy GMail account, after it was created I modified it to have my Optonline account specifications, turned off SSL and it worked.
After I had circumvented this problem, someone else that had the same problem found a different resolution. We both also had .mac accounts defind. When they deleted their .Mac account from the mail program, they were able to create a new Optonline.net account. .Mac uses SSL.... interesting.
Thus, it seems that if you have a .Mac account with Mail 3.1 you can not create an Optonline.net account. A bug that I hope Apple fixes quickly.iLounge had some good info on this topic. The KEY INFO in the post was that after you have gotten the account set up you need to turn off your WiFi router (if you have one) to reset it.
http://forums.ilounge.com/showthread.php?t=221752
Here are the details on how Optonline says you set up an account:
Name: type your name here
Address: [email protected]
Description: whatever you want to put here
Incoming Mail Server
Host Name: mail.optonline.net
User Name: xxxxxxxxxx (don't add "@optonline.net" here, but put what goes before it)
Password: your password here
Outgoing Mail Server (SMTP)
Host Name: mail.optonline.net
User Name: xxxxxxxxxx (don't add "@optonline.net" here, but put what goes before it)
Password: your password here
My other settings under the "Advanced" tab look like this...
Deleted Messages
Remove: Never
Incoming Settings:
Use SSL: OFF
Authentication: Password
Delete from Server: Never
Server Port: 110
Outgoing Settings:
Use SSL: OFF
Authentication: Password
Delete from Server: Never
Server Port: 587
===========
This person adds "Oh, one more thing... after you save your account settings, you may need to turn off WIFI, then "power off"... then "power on" turn WIFI back on and try to get mail again after it connects."
============
Based on the information I read here and on iLounge I was able to get Optonline email working.
1) Deleted my Dot Mac mail accounts in Apple Mail
2) Created an Optonline account based on the details above from Optonline in Apple Mail
3) Unplugged my Airport Extreme Base Station, waited 20 seconds, plugged it back in.
4) I was then able to receive mail but not send on the Optonline SMTP server
5) So...I then went back and checked the details on the Optonline account in Apple Mail. Not sure why but the SSL/authentication selections were changed. So I set them correctly based on the information above and saved. That worked and I was able to send email.
As you are having trouble with Apple Mail and Optonline (why else would you be reading this?) let me also mention that Optonline blocks Port 25 for outbound email so if you have non-Optimum Online email accounts and want to send email on that ISP's server you will not be able to do that unless (a) you pay Cablevision more for a business or boost account (b) use webmail (c) your ISP is willing to provide you with an alternative email port other than 25.
Here is the page from their site on this topic
ort 25 and Optimum Online
Answer
All e-mail sent via the Internet is routed through Port 25, the channel used for communication between an e-mail client and an e-mail server. Activation of Port 25 is currently available with Optimum Online® Boost or Optimum Online for Business. Please continue reading for more information, including activation instructions.
Port 25 Filtering/Blocking
To help control the amount of spam that originates from the Optimum Online network, Optimum Online filters outbound Port 25 e-mail (SMTP) traffic for all standard Optimum Online customers. This filtering is a common spam control measure used by Internet Service Providers. It not only prevents spam sent intentionally, but also thwarts computer viruses that let spammers connect to an unsuspecting customer's infected computer and send spam.
This filtering is transparent to the vast majority of our users. However, if you access a non-Optimum Online e-mail service with an e-mail client application (like Outlook Express), or run your own mail server, you may not be able to send and/or receive e-mail.
Port 25 Availability
If you require Port 25 to be active, Optimum Online offers these options:
Subscribe to Optimum Online Boost. Click here for more information.
Businesses can subscribe to Optimum Online for Business or Optimum Online Boost for Business.
Activating Port 25
If you subscribe to Optimum Online Boost, and would like to utilize Port 25, you'll need to activate it. Simply follow these steps:
Log into optimum.net using your Optimum ID and Password.
Click on Optimum Services.
Click Manage from within the Advanced Config section.
Set Port 25 to On and click Submit. Your modem will be rebooted automatically. Once it starts up, Port 25 will be active.
Optimum Online for Business customers who do not subscribe to Optimum Online Boost can call Technical Support at 1-866-575-8000 to have Port 25 activated.
Workarounds for Standard Optimum Online Customers
If Port 25 filtering is affecting your ability to send or receive non-Optimum Online e-mail, here are some options you may choose to pursue:
Contact your e-mail service provider to see if they support alternate connection methods such as VPN or SMTPS.
If available, use your e-mail service provider's WebMail. -
Run-time error '429':Active X component can not create an object
Hi Folks,
I am using some VBA code to run logic in BPC for Excel. When i try to click on VBA button, It's giving the below error.However when i am trying to execute same from server it is working fine. Accessing from BPC client only we are facing this problem.
Code have no issues. Is there any specific thing need to mentioned in client when we use VBA programming? Basically we used the VBA program to create the id's in BPC for Excel. So that it will automatically created on fly. Testing was fine interms of working in Server.
" Run-time error '429':Active X component can not create an object ."Hi,
Are you trying to add a member into the dimension from excel? As you said that this has been already tested in the server and is working fine, I believe, you have taken care of everything.
Now, coming to the point, when you are adding a member in the membersheet, you need to process the dimension. This requires the admin rights. So, please check the task profile of the user ID, with which you are trying from your system. This user ID should be the primary admin.
Hope this helps.
Additionally, can you please elaborate on the steps on what you followed for adding a member from the excel directly? -
Service Ticket : Create Follow-Up Transaction
Hi everybody,
I'm facing a problem in creating a follow up transaction in Interaction Center Web UI.
I'm working with Service Tickets, I made the customizing for the copy control to Service Order, and I'm able to create follow-up transaction from SAP GUI. But on IC Web UI , when I click on Create Follow-Up button on Service Ticket's view , I get an info message that tells me the operation has been created, that's non true!
Please help, thanks in advance,
Paolo F.C.Hi Sreekanth,
thank you very much for your reply!
I'm still not able to produce the follow up Service Order from Service Tiket, I don't see it in the Business Context.
But you helped me anyway, because there I saw the Interaction Record , I tried to create a follow up Service
Order from it, and it works!
So probably I made some mistake in customizing, I'll try to compare the copy control of Interaction Record
the one for Service Tiket to underdstand.
So the question is not answered yet, but I'll give you some points 'cause you helped me!
Greetings,
Paolo F.C. -
Can I Control Follow Up Transactions based on the Status ?
Hi,
I have created follow-up transaction (Quote) for main transaction Opportunity (this is custom defined transaction). I am able to create the follow-up transaction alright. However, now I would want to restrict the creation of follow up transaction based on the status of Opportunity. E.g if the Opportunity status is "Open" then I should not be able to create the follow-up transaction, wheras if the Opportunity status is "Won" then I should be able to create the follow-up transaction.
Any help will be highly appreciated.
Regards,
DiptenduWrite this restricting condition in COPY or OPPORT_H method of CRM_COPY_BADI. Raise an error message when status is not as desired which will stop the creation of follow up document. Do not forget to filter for transaction type i.e. process type. Also to make it exclusive for creation of follow up document (not code for copy control also), put some other condition checking docflow or something.
-
Active X can not create running Scriptlistener VB code in Creative Cloud Photoshop
Currently, I am recieving an Active X can not create error when running this code. I use Visual Studio 2012 run as administrator in x86 mode, Creative Cloud 32bit run as administrator. OS is windows .
I am able to access the com library for CC in VS. When I run into troubleshooting this Script listener code, this type of code appears in several different functions throughout the application. I am getting an Active X error when the CreateObject("Photoshop.ActionDescriptor") is hit.
I am also logged in as an administrator of the box. I have created the process from a scriptlister log with the CS6 Scriptlistener in CC.
Any direction or feedback is appreciated. I need to know if I am missing something obvious.
Thank you,
Sub psAddGuide(ByVal pixelLocation As Integer, ByVal orientation As Integer) '0 = vertical, 1 = horizontal
If orientation = 1 Or orientation = 0 Then
Dim orientationID As String = ""
If orientation = 0 Then
orientationID = "Vrtc"
Else
orientationID = "Hrzn"
End If
'Script Listener code - don't blame me.
Dim objApp = CreateObject("Photoshop.Application")
REM Use dialog mode 3 for show no dialogs
Dim dialogMode As Integer = 3
Dim id6
id6 = objApp.CharIDToTypeID("Mk ")
Dim desc3
desc3 = CreateObject("Photoshop.ActionDescriptor")
Dim id7
id7 = objApp.CharIDToTypeID("Nw ")
Dim desc4
desc4 = CreateObject("Photoshop.ActionDescriptor")
Dim id8
id8 = objApp.CharIDToTypeID("Pstn")
Dim id9
id9 = objApp.CharIDToTypeID("#Pxl")
Call desc4.PutUnitDouble(id8, id9, pixelLocation)
Dim id10
id10 = objApp.CharIDToTypeID("Ornt")
Dim id11
id11 = objApp.CharIDToTypeID("Ornt")
Dim id12
id12 = objApp.CharIDToTypeID(orientationID)
Call desc4.PutEnumerated(id10, id11, id12)
Dim id13
id13 = objApp.CharIDToTypeID("Gd ")
Call desc3.PutObject(id7, id13, desc4)
Call objApp.ExecuteAction(id6, desc3, dialogMode)
End If
End SubHi Richard,
Welcome to the Community!
The following might explain and help solve the problem...
U44M1P7 - Updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manage r-update.html
Thanks!
Ankit -
Yoga 11 - can not create an account for the App store,
I can not create an account for the App store, I live outside of the USA and the only address option is in the USA. Can you help me
Moderator Note: Edited subject to match content.Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
I have verified the Microsoft windows 8 app store has different regions listed
And you can connect app store using an existing Microsoft account like Hotmail, msn etc.
Please refer below link
http://windows.microsoft.com/en-US/windows-8/explore-windows-store#1TC=t1
Also if you can share the link or screen shot of the app store to help you further
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español -
FRM-10044 Can not create a file URGENT PLEASE!!
I installed Oracle 8i and Forms 6i in a pentium 4 changing the symcjit.dll -> symcjit.old.
Now I want to use the same scripts and Forms that I have saved using my old machine but I can't save new forms or update the old ones.
FRM 10044 Can not create the file
I can run the scripts in SQL.
Please Help me it is urgent.
I have installed and uninstalled the Data Base many times and I have read previous posts.
Thank you a lot.Hi,
"Cannot Create File" means forms failed to create/save the file. Check the following
* Do you have full access to the drive?
* Did you mark either the form or its directory as read only?
Regards,
Momen.
Hi Helena,
How are you? We are into Arabic development environment. I am trying to migrate from 6i (CS) to 9i (web). Everything went fine but when I run the report, the browser is displaying junk characters.
Did you experience this problem?
If you have any suggestions you can mail me on [email protected]
Regards,
Momen. -
We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......
Maybe you are looking for
-
How can I add a password to the saved password list? Or edit a password?
I changed my password at a site but I cannot change it in the saved passwords.
-
ok my album art is all messed up on my nano, and some aren't even showing if anyone can help, i thank u
-
Unable to download free apps in Itunes
I was unable to purchase paid apps and was getting the message that "your transaction was declined" and today I am even not being able to download free apps/games from the itunes store. Whenever I click a free app I am being taken to the billing info
-
How do I resolve error 150:30 with an FTP error following the closing of the window for the first error?
-
Purpose of local-alerting under voice-port?
Hello; During a recent migration I noticed a "local-alerting" command under a couple voice-port configurations: voice-port 2/1:23 local-alerting I did not enter the command in myself, and I checked with the other engineers and all are positive they d