Can not create mapping fro message type defined in a folder in PI
Hello
in PI 7.1, there is feature to created folder which is very good to organize you objects in the way you like. In ESR, I can create a new folder, and then create data type and message type within the folder, however when I try to create a message mapping, I can NOT use message types created in any folders, only the message types created in the SAP pre-defined node Message Types can be used for message mapping. Is it a bug? if yes, in which SP will it be fixed? is there any go-around for this issue by now? I am using PI 7.1 SP5.
Thanks
Eric
Hi Eric,
It is not the flaw.
You have two options :
1) You can directly drag the Message Type into Message Mapping Source and Target Message area
2) Select the Signature Tab -->Create the New Entry of Message Type and Select from the Search Result
regards
Gangaprasad
Similar Messages
-
Upgraded to IOS 5, now mail on mac can not create a new message/forward or reply to any messages
Upgraded to IOS 5, now mail on mac is not working. Can receive mail but can not create a new message/forward or reply to any messages. It appears it has tried to create a new message in the background but I can't click on it. Please help.
Upgraded to IOS 5, now mail on mac is not working. Can receive mail but can not create a new message/forward or reply to any messages. It appears it has tried to create a new message in the background but I can't click on it. Please help.
-
You can not post a blank message. Please type your message and try again.
some additional info about the clean install, I did not Migrate any data over from a Time Machine, I started fresh. Perhaps this could be my issue. Do I need to Migrate over the User account in order to have access to my old data?
-
ORA-01180: can not create datafile 1 during RMAN restore.
Hello,
I am trying to refresh one of our QA environments and I am getting this error message:
RMAN> run
2> {
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> restore database;
6> recover database;
7> }
allocated channel: c1
channel c1: SID=5 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 08-NOV-12
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2012 16:27:40
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
RMAN> shutdown immediate
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 534462464 bytes
Fixed Size 2228200 bytes
Variable Size 176160792 bytes
Database Buffers 348127232 bytes
Redo Buffers 7946240 bytes
RMAN> set dbid=3573460394
executing command: SET DBID
RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
Starting restore at 08-NOV-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
+output file name=+DATA1/alephpr/controlfile/current.260.798747585+
+output file name=+FLASH/alephpr/controlfile/current.276.798747585+
Finished restore at 08-NOV-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
RMAN> crosscheck backup;
Crosschecked 48 objects
RMAN> delete noprompt expired backup;
Deleted 48 EXPIRED objects
RMAN> list backup summary;
specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
RMAN> catalog start with '/restorealeph/';
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
4097 B F A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
4098 B A A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4097 Full 178.04G DISK 00:00:00 07-NOV-12
BP Key: 4097 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9cnpm51u_1_1
List of Datafiles in backup set 4097
File LV Type Ckp SCN Ckp Time Name
1 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
2 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
3 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
4 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
5 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
6 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
7 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
8 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
9 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
10 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
11 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
12 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
13 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
14 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
15 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
16 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
17 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
18 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
19 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
26 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
27 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
28 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
29 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
30 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
31 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
BS Key Size Device Type Elapsed Time Completion Time
4098 16.89G DISK 00:00:00 07-NOV-12
BP Key: 4098 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9enpm6lj_1_1
List of Archived Logs in backup set 4098
Thrd Seq Low SCN Low Time Next SCN Next Time
1 35722 6919870864350 06-NOV-12 6919871887697 06-NOV-12
1 35723 6919871887697 06-NOV-12 6919872372211 06-NOV-12
1 35724 6919872372211 06-NOV-12 6919872410158 06-NOV-12
1 35725 6919872410158 06-NOV-12 6919872447301 06-NOV-12
1 35726 6919872447301 06-NOV-12 6919872503332 06-NOV-12
1 35727 6919872503332 06-NOV-12 6919872551564 06-NOV-12
1 35728 6919872551564 06-NOV-12 6919872603881 06-NOV-12
1 35729 6919872603881 06-NOV-12 6919872655942 06-NOV-12
1 35730 6919872655942 06-NOV-12 6919872698722 06-NOV-12
1 35731 6919872698722 06-NOV-12 6919872741655 06-NOV-12
1 35732 6919872741655 06-NOV-12 6919872782284 06-NOV-12
1 35733 6919872782284 06-NOV-12 6919872872302 06-NOV-12
1 35734 6919872872302 06-NOV-12 6919872910206 06-NOV-12
1 35735 6919872910206 06-NOV-12 6919872945577 06-NOV-12
1 35736 6919872945577 06-NOV-12 6919872980056 06-NOV-12
1 35737 6919872980056 06-NOV-12 6919873013411 06-NOV-12
1 35738 6919873013411 06-NOV-12 6919873050761 06-NOV-12
1 35739 6919873050761 06-NOV-12 6919873084996 06-NOV-12
1 35740 6919873084996 06-NOV-12 6919873122049 06-NOV-12
1 35741 6919873122049 06-NOV-12 6919873521767 06-NOV-12
1 35742 6919873521767 06-NOV-12 6919873952773 06-NOV-12
1 35743 6919873952773 06-NOV-12 6919874258549 06-NOV-12
1 35744 6919874258549 06-NOV-12 6919874472213 06-NOV-12
1 35745 6919874472213 06-NOV-12 6919874744856 06-NOV-12
1 35746 6919874744856 06-NOV-12 6919875113086 06-NOV-12
1 35747 6919875113086 06-NOV-12 6919875733337 06-NOV-12
1 35748 6919875733337 06-NOV-12 6919876139061 06-NOV-12
1 35749 6919876139061 06-NOV-12 6919876707162 06-NOV-12
1 35750 6919876707162 06-NOV-12 6919877706313 06-NOV-12
1 35751 6919877706313 06-NOV-12 6919877919039 06-NOV-12
1 35752 6919877919039 06-NOV-12 6919878024429 06-NOV-12
1 35753 6919878024429 06-NOV-12 6919878107673 06-NOV-12
1 35754 6919878107673 06-NOV-12 6919878258511 06-NOV-12
1 35755 6919878258511 06-NOV-12 6919878308336 06-NOV-12
1 35756 6919878308336 06-NOV-12 6919878424419 06-NOV-12
1 35757 6919878424419 06-NOV-12 6919878488485 06-NOV-12
1 35758 6919878488485 06-NOV-12 6919878827092 06-NOV-12
1 35759 6919878827092 06-NOV-12 6919879350098 07-NOV-12
1 35760 6919879350098 07-NOV-12 6919879675556 07-NOV-12
2 35949 6919870864360 06-NOV-12 6919871494640 06-NOV-12
2 35950 6919871494640 06-NOV-12 6919871887487 06-NOV-12
2 35951 6919871887487 06-NOV-12 6919872410655 06-NOV-12
2 35952 6919872410655 06-NOV-12 6919872552468 06-NOV-12
2 35953 6919872552468 06-NOV-12 6919872698940 06-NOV-12
2 35954 6919872698940 06-NOV-12 6919872872690 06-NOV-12
2 35955 6919872872690 06-NOV-12 6919872980371 06-NOV-12
2 35956 6919872980371 06-NOV-12 6919873085902 06-NOV-12
2 35957 6919873085902 06-NOV-12 6919873569082 06-NOV-12
2 35958 6919873569082 06-NOV-12 6919873949096 06-NOV-12
2 35959 6919873949096 06-NOV-12 6919874404640 06-NOV-12
2 35960 6919874404640 06-NOV-12 6919875011814 06-NOV-12
2 35961 6919875011814 06-NOV-12 6919875631429 06-NOV-12
2 35962 6919875631429 06-NOV-12 6919876324885 06-NOV-12
2 35963 6919876324885 06-NOV-12 6919876363526 06-NOV-12
2 35964 6919876363526 06-NOV-12 6919876748508 06-NOV-12
2 35965 6919876748508 06-NOV-12 6919877741784 06-NOV-12
2 35966 6919877741784 06-NOV-12 6919878108943 06-NOV-12
2 35967 6919878108943 06-NOV-12 6919878424477 06-NOV-12
2 35968 6919878424477 06-NOV-12 6919879012111 06-NOV-12
2 35969 6919879012111 06-NOV-12 6919879260589 07-NOV-12
2 35970 6919879260589 07-NOV-12 6919879350086 07-NOV-12
2 35971 6919879350086 07-NOV-12 6919879464935 07-NOV-12
2 35972 6919879464935 07-NOV-12 6919879548399 07-NOV-12
2 35973 6919879548399 07-NOV-12 6919879675564 07-NOV-12
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ALEPHPR 3573460394 PARENT 1 13-MAY-10
2 2 ALEPHPR 3573460394 PARENT 2229467 28-JUN-10
3 3 ALEPHPR 3573460394 CURRENT 6918261828355 26-SEP-12The ASM structure is created...
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
ASMCMD> cd DATA1/ALEPHPR/DATAFILE
ASMCMD> pwd
+DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
Any idea?
Thanks
Martin
Edited by: martin.morono on Nov 8, 2012 11:19 AM
Edited by: martin.morono on Nov 8, 2012 11:49 AMThanks Levi,
I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
No luck. The error message is different but the result is the same... it keeps failing.
RMAN> run {
2> allocate channel c1 device type disk;
3> allocate channel c2 device type disk;
4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
5> startup mount;
6> catalog start with '/restorealeph/';
7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
8> }
allocated channel: c1
channel c1: SID=191 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 09 NOV 2012 13:11:09
channel c2: skipped, AUTOBACKUP already found
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:15
output file name=+DATA1/alephpr/controlfile/current.260.798747585
output file name=+FLASH/alephpr/controlfile/current.276.798747585
Finished restore at 09 NOV 2012 13:11:24
database is already started
database mounted
Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
Crosschecked 52 objects
Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
Crosschecked 2 objects
Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YEs
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Starting restore at 09 NOV 2012 13:11:48
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/09/2012 13:11:48
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
THanks again for your help.
Regards.
Martin
Edited by: martin.morono on Nov 9, 2012 7:21 AM -
Mail V3.1 can not create a new Cablevision Optimum Online mail account
Apple Technical support asked me to report this on this forum.
I have OS X 10.5.1 with Mail 3.1. My ISP is Cablevision Optimum Online, which uses mail.optonline.net as their POP and SMTP servers.
Pre-existing mail accounts, created under 10.4.x (Tiger) work perfectly. I am unable to create a new mail account with this version of the mail program. Mail's Add Account dialog (wizard) hangs as soon as it tries to connect to the mail.optonline.com server. After a long time trying it just says it can not connect to the server. This happens if I choose the new (and default) "Automatically set up account" option or not. It happens on multiple Leopard systems. In other words, when the mail account setup wizard checks for connectivity to the mail.optonline.net POP server, it fails, even though the mail program has no problem interacting with that same server with accounts set up under a previous version.
We brought a MacBook to the Apple store, and the tech. at the genius bar could not get it to work. He said call the ISP. We did that, spent hours with the ISP tech who told me many people are complaining about this. I suspected it was a problem with the way Mail 3.1 was doing its initial connectivity check. Perhaps using an incompatible port (SSL setting perhaps).
After a good nights sleep, I figured out a work-around. I created a dummy GMail account, after it was created I modified it to have my Optonline account specifications, turned off SSL and it worked.
After I had circumvented this problem, someone else that had the same problem found a different resolution. We both also had .mac accounts defind. When they deleted their .Mac account from the mail program, they were able to create a new Optonline.net account. .Mac uses SSL.... interesting.
Thus, it seems that if you have a .Mac account with Mail 3.1 you can not create an Optonline.net account. A bug that I hope Apple fixes quickly.iLounge had some good info on this topic. The KEY INFO in the post was that after you have gotten the account set up you need to turn off your WiFi router (if you have one) to reset it.
http://forums.ilounge.com/showthread.php?t=221752
Here are the details on how Optonline says you set up an account:
Name: type your name here
Address: [email protected]
Description: whatever you want to put here
Incoming Mail Server
Host Name: mail.optonline.net
User Name: xxxxxxxxxx (don't add "@optonline.net" here, but put what goes before it)
Password: your password here
Outgoing Mail Server (SMTP)
Host Name: mail.optonline.net
User Name: xxxxxxxxxx (don't add "@optonline.net" here, but put what goes before it)
Password: your password here
My other settings under the "Advanced" tab look like this...
Deleted Messages
Remove: Never
Incoming Settings:
Use SSL: OFF
Authentication: Password
Delete from Server: Never
Server Port: 110
Outgoing Settings:
Use SSL: OFF
Authentication: Password
Delete from Server: Never
Server Port: 587
===========
This person adds "Oh, one more thing... after you save your account settings, you may need to turn off WIFI, then "power off"... then "power on" turn WIFI back on and try to get mail again after it connects."
============
Based on the information I read here and on iLounge I was able to get Optonline email working.
1) Deleted my Dot Mac mail accounts in Apple Mail
2) Created an Optonline account based on the details above from Optonline in Apple Mail
3) Unplugged my Airport Extreme Base Station, waited 20 seconds, plugged it back in.
4) I was then able to receive mail but not send on the Optonline SMTP server
5) So...I then went back and checked the details on the Optonline account in Apple Mail. Not sure why but the SSL/authentication selections were changed. So I set them correctly based on the information above and saved. That worked and I was able to send email.
As you are having trouble with Apple Mail and Optonline (why else would you be reading this?) let me also mention that Optonline blocks Port 25 for outbound email so if you have non-Optimum Online email accounts and want to send email on that ISP's server you will not be able to do that unless (a) you pay Cablevision more for a business or boost account (b) use webmail (c) your ISP is willing to provide you with an alternative email port other than 25.
Here is the page from their site on this topic
ort 25 and Optimum Online
Answer
All e-mail sent via the Internet is routed through Port 25, the channel used for communication between an e-mail client and an e-mail server. Activation of Port 25 is currently available with Optimum Online® Boost or Optimum Online for Business. Please continue reading for more information, including activation instructions.
Port 25 Filtering/Blocking
To help control the amount of spam that originates from the Optimum Online network, Optimum Online filters outbound Port 25 e-mail (SMTP) traffic for all standard Optimum Online customers. This filtering is a common spam control measure used by Internet Service Providers. It not only prevents spam sent intentionally, but also thwarts computer viruses that let spammers connect to an unsuspecting customer's infected computer and send spam.
This filtering is transparent to the vast majority of our users. However, if you access a non-Optimum Online e-mail service with an e-mail client application (like Outlook Express), or run your own mail server, you may not be able to send and/or receive e-mail.
Port 25 Availability
If you require Port 25 to be active, Optimum Online offers these options:
Subscribe to Optimum Online Boost. Click here for more information.
Businesses can subscribe to Optimum Online for Business or Optimum Online Boost for Business.
Activating Port 25
If you subscribe to Optimum Online Boost, and would like to utilize Port 25, you'll need to activate it. Simply follow these steps:
Log into optimum.net using your Optimum ID and Password.
Click on Optimum Services.
Click Manage from within the Advanced Config section.
Set Port 25 to On and click Submit. Your modem will be rebooted automatically. Once it starts up, Port 25 will be active.
Optimum Online for Business customers who do not subscribe to Optimum Online Boost can call Technical Support at 1-866-575-8000 to have Port 25 activated.
Workarounds for Standard Optimum Online Customers
If Port 25 filtering is affecting your ability to send or receive non-Optimum Online e-mail, here are some options you may choose to pursue:
Contact your e-mail service provider to see if they support alternate connection methods such as VPN or SMTPS.
If available, use your e-mail service provider's WebMail. -
OWS-00102 Reason for not creating a custom Java type: simple or mixed conte
Hi ,
I am generating the java proxies from a WSDL file in Jdeveloper and I am getting the below warning.
WARNING: OWS-00102 Mapped {http://xmlns.fmr.com/systems/dev/aar/requests}ViewRequestStatusResult to javax.xml.soap.SOAPElement ViewRequestStatusResult. Reason for not creating a custom Java type: simple or mixed content is not supported.
I have tried using Jpub as well, but it does not work as well.
I am very new to JAVA and It seems some java code needs to be created. can any one please help me how to resolve this issue.
Thanks and Regards,
Vineetvar cResponse = app.response({
cQuestion: "Enter the section number to appear in the stamp.",
cTitle: "Section Number",
cLabel: "Section Number:"
if (cResponse == null) {
event.value = '*INVALID*";
else
event.value = cResponse;
You can only remove the 'Warning JavaScirpt" is by creating a special application folder script for the 'app.response' method that uses the 'trustedFuncton' to suppress this security warning. Then in you form, you will need to test for this function and either issue a warning about the missing function or run the 'app.response' code and live with the warning. Each system will need the special application folder script installed on it. -
DBMS_XMLSCHEMA.CopyEvolve produces ORA-30945: Could not create mapping tabl
Hi,
I am trying to update a XML Schema concerning the documents relaties.xsd (the old one) and relaties_v2.xsd (the new one containing only a minor change).
The document relaties.xsd looks like this:
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb"
elementFormDefault="unqualified"
attributeFormDefault="unqualified"
version="1.0">
<xsd:element name="Relatie" xdb:defaultTable="">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Voornaam" type="xsd:string"/>
<xsd:element name="Achternaam" type="xsd:string"/>
<xsd:element name="Tussenvoegsel" type="xsd:string"/>
<xsd:element name="Geboortedatum" type="xsd:date"/>
<xsd:element name="Geslacht">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:enumeration value="M"/>
<xsd:enumeration value="V"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Sofinummer">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="\d{9}"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Straatnaam" type="xsd:string"/>
<xsd:element name="Huisnummer" type="xsd:string"/>
<xsd:element name="Woonplaats" type="xsd:string"/>
<!--xsd:element name="Postcode" type="xsd:string"/-->
<xsd:element name="Postcode">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="\d{4} [A-Z]{2}"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Zrn">
<xsd:simpleType>
<xsd:restriction base="xsd:integer">
<xsd:minInclusive value="1000000"/>
<xsd:maxInclusive value="99999999999999"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Here are the steps I took.
DECLARE
res BOOLEAN;
BEGIN
res := DBMS_XDB.createResource('/xsd/relaties.xsd',
bfilename('XSDDIR', 'relaties.xsd')
END;
DECLARE
res BOOLEAN;
BEGIN
res := DBMS_XDB.createResource('/xsd/relaties_v2.xsd',
bfilename('XSDDIR', 'relaties_v2.xsd')
END;
BEGIN
DBMS_XMLSCHEMA.registerSchema(
'http://localhost:8080/xsd/relaties.xsd',
XDBURIType('/xsd/relaties.xsd').getClob(),
TRUE,
FALSE,
FALSE,
TRUE);
END;
CREATE
TABLE relatie_documenten OF XMLTYPE
XMLSCHEMA "http://localhost:8080/xsd/relaties.xsd"
ELEMENT "Relatie"
CREATE OR REPLACE
TRIGGER upo_rdt_ai
AFTER INSERT ON relatie_documenten
FOR EACH ROW
DECLARE
doc XMLType;
BEGIN
doc := :new.SYS_NC_ROWINFO$;
XMLType.schemaValidate(doc);
END;
Then I inserted some xml documents into the table relatie_documenten. The XSD worked fine.
Then I executed the following statement:
BEGIN
DBMS_XMLSCHEMA.copyEvolve
( schemaURLs => xdb$string_list_t('http://localhost:8080/xsd/relaties.xsd')
, newSchemas => XMLSequenceType(XDBURIType('/xsd/relaties_v2.xsd').getXML())
, preserveOldDocs => TRUE
, mapTabName => 'RELATIE_DOCUMENTEN_TEMP'
, generateTables => FALSE
END;
This resulted in:
ERROR at line 1:
ORA-30945: Could not create mapping table 'RELATIE_DOCUMENTEN_TEMP'
ORA-00600: internal error code, arguments: [kqludp2], [0x66AB407C], [0], [],
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 113
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 210
ORA-06512: at line 2
I checked system priviliges as documented in XML DB Developers Guide, Chapter 8 XML Schema Evolution. No other users were connected. The mapping table RELATIE_DOCUMENTEN_TEMP nor any other object named RELATIE_DOCUMENTEN_TEMP did not exist.
Anyone an idea why I cannot create my mapping table ?
GregorWhich release / platform are you working with
With 10.2.0.2.1 on Widows I get
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> --
SQL> begin
2 :schemaURL := 'http://localhost:8080/xsd/relaties.xsd';
3 :schemaPath := '/public/relaties.xsd';
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> call dbms_xmlSchema.deleteSchema(:schemaURL,4)
2 /
Call completed.
SQL> declare
2 res boolean;
3 xmlSchema xmlType := xmlType(
4 '<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
5 xmlns:xdb="http://xmlns.oracle.com/xdb"
6 elementFormDefault="unqualified"
7 attributeFormDefault="unqualified"
8 version="1.0">
9 <xsd:element name="Relatie" xdb:defaultTable="">
10 <xsd:complexType>
11 <xsd:sequence>
12 <xsd:element name="Voornaam" type="xsd:string"/>
13 <xsd:element name="Achternaam" type="xsd:string"/>
14 <xsd:element name="Tussenvoegsel" type="xsd:string"/>
15 <xsd:element name="Geboortedatum" type="xsd:date"/>
16 <xsd:element name="Geslacht">
17 <xsd:simpleType>
18 <xsd:restriction base="xsd:string">
19 <xsd:enumeration value="M"/>
20 <xsd:enumeration value="V"/>
21 </xsd:restriction>
22 </xsd:simpleType>
23 </xsd:element>
24 <xsd:element name="Sofinummer">
25 <xsd:simpleType>
26 <xsd:restriction base="xsd:string">
27 <xsd:pattern value="\d{9}"/>
28 </xsd:restriction>
29 </xsd:simpleType>
30 </xsd:element>
31 <xsd:element name="Straatnaam" type="xsd:string"/>
32 <xsd:element name="Huisnummer" type="xsd:string"/>
33 <xsd:element name="Woonplaats" type="xsd:string"/>
34 <!--xsd:element name="Postcode" type="xsd:string"/-->
35 <xsd:element name="Postcode">
36 <xsd:simpleType>
37 <xsd:restriction base="xsd:string">
38 <xsd:pattern value="\d{4} [A-Z]{2}"/>
39 </xsd:restriction>
40 </xsd:simpleType>
41 </xsd:element>
42 <xsd:element name="Zrn">
43 <xsd:simpleType>
44 <xsd:restriction base="xsd:integer">
45 <xsd:minInclusive value="1000000"/>
46 <xsd:maxInclusive value="99999999999999"/>
47 </xsd:restriction>
48 </xsd:simpleType>
49 </xsd:element>
50 </xsd:sequence>
51 </xsd:complexType>
52 </xsd:element>
53 </xsd:schema>');
54 begin
55 if (dbms_xdb.existsResource(:schemaPath)) then
56 dbms_xdb.deleteResource(:schemaPath);
57 end if;
58 res := dbms_xdb.createResource(:schemaPath,xmlSchema);
59 end;
60 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2 DBMS_XMLSCHEMA.registerSchema(
3 :schemaURL,
4 XDBURIType(:schemaPath).getClob(),
5 TRUE,
6 FALSE,
7 FALSE,
8 TRUE);
9 END;
10 /
PL/SQL procedure successfully completed.
SQL> DROP TABLE relatie_documenten FORCE
2 /
Table dropped.
SQL> CREATE TABLE relatie_documenten OF XMLTYPE
2 XMLSCHEMA "http://localhost:8080/xsd/relaties.xsd"
3 ELEMENT "Relatie"
4 /
Table created.
SQL> CREATE OR REPLACE TRIGGER upo_rdt_ai
2 AFTER INSERT ON relatie_documenten
3 FOR EACH ROW
4 DECLARE
5 doc XMLType;
6 BEGIN
7 doc := :new.SYS_NC_ROWINFO$;
8 XMLType.schemaValidate(doc);
9 END;
10 /
Trigger created.
SQL> INSERT
2 INTO relatie_documenten
3 VALUES (XMLType
4 ('<Relatie>
5 <Voornaam>Johan</Voornaam>
6 <Achternaam>Hermans</Achternaam>
7 <Tussenvoegsel/>
8 <Geboortedatum>1978-01-02</Geboortedatum>
9 <Geslacht>M</Geslacht>
10 <Sofinummer>233300417</Sofinummer>
11 <Straatnaam>Stationstraat</Straatnaam>
12 <Huisnummer>10</Huisnummer>
13 <Woonplaats>Weesp</Woonplaats>
14 <Postcode>1383 AK</Postcode>
15 <Zrn>1234567</Zrn>
16 </Relatie>'
17 ).CreateSchemaBasedXML(:schemaURL))
18 /
1 row created.
SQL> commit
2 /
Commit complete.
SQL> INSERT
2 INTO relatie_documenten
3 VALUES (XMLType
4 ('<Relatie>
5 <Voornaam>Johanna</Voornaam>
6 <Achternaam>Gurts</Achternaam>
7 <Tussenvoegsel/>
8 <Geboortedatum>1975-11-12</Geboortedatum>
9 <Geslacht>V</Geslacht>
10 <Sofinummer>234109807</Sofinummer>
11 <Straatnaam>Stationstraat</Straatnaam>
12 <Huisnummer>10</Huisnummer>
13 <Woonplaats>Weesp</Woonplaats>
14 <Postcode>1383 AK</Postcode>
15 <Zrn>7654321</Zrn>
16 </Relatie>').CreateSchemaBasedXML(:schemaURL))
17 /
1 row created.
SQL> commit
2 /
Commit complete.
SQL> INSERT
2 INTO relatie_documenten
3 VALUES (XMLType
4 ('<Relatie>
5 <Voornaam>Johanna</Voornaam>
6 <Achternaam>Gurts</Achternaam>
7 <Tussenvoegsel/>
8 <Geboortedatum>1975-11-12</Geboortedatum>
9 <Geslacht>O</Geslacht>
10 <Sofinummer>234109807</Sofinummer>
11 <Straatnaam>Stationstraat</Straatnaam>
12 <Huisnummer>10</Huisnummer>
13 <Woonplaats>Weesp</Woonplaats>
14 <Postcode>1383 AK</Postcode>
15 <Zrn>7654321</Zrn>
16 </Relatie>').CreateSchemaBasedXML(:schemaURL))
17 /
VALUES (XMLType
ERROR at line 3:
ORA-31038: Invalid enumeration value: "O"
ORA-06512: at "SYS.XMLTYPE", line 345
ORA-06512: at "SCOTT.UPO_RDT_AI", line 5
ORA-04088: error during execution of trigger 'SCOTT.UPO_RDT_AI'
SQL> commit
2 /
Commit complete.
SQL> declare
2 xmlschema xmltype;
3 res boolean;
4 begin
5 select xdburitype(:schemaPath).getXML()
6 into xmlSchema
7 from dual;
8 dbms_xdb.deleteResource(:schemaPath);
9 select insertChildXML
10 (
11 xmlschema,
12 '/xsd:schema//xsd:element[@name="Geslacht"]/xsd:simpleType/xsd:restriction',
13 'xsd:enumeration',
14 xmltype('<xsd:enumeration xmlns:xsd="http://www.w3.org/2001/XMLSchema" value="O"/>'),
15 'xmlns:xsd="http://www.w3.org/2001/XMLSchema"'
16 )
17 into xmlSchema
18 from dual;
19 res := dbms_xdb.createResource(:schemaPath,xmlSchema);
20 end;
21 /
PL/SQL procedure successfully completed.
SQL> commit
2 /
Commit complete.
SQL> set long 100000 pages 200 lines 140
SQL> --
SQL> select xdburitype(:schemaPath).getXML()
2 from dual
3 /
XDBURITYPE(:SCHEMAPATH).GETXML()
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="unqualified" attributeF
ormDefault="unqualified" version="1.0">
<xsd:element name="Relatie" xdb:defaultTable="">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Voornaam" type="xsd:string"/>
<xsd:element name="Achternaam" type="xsd:string"/>
<xsd:element name="Tussenvoegsel" type="xsd:string"/>
<xsd:element name="Geboortedatum" type="xsd:date"/>
<xsd:element name="Geslacht">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:enumeration value="M"/>
<xsd:enumeration value="V"/>
<xsd:enumeration xmlns:xsd="http://www.w3.org/2001/XMLSchema" value="O"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Sofinummer">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="\d{9}"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Straatnaam" type="xsd:string"/>
<xsd:element name="Huisnummer" type="xsd:string"/>
<xsd:element name="Woonplaats" type="xsd:string"/>
<!--xsd:element name="Postcode" type="xsd:string"/-->
<xsd:element name="Postcode">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="\d{4} [A-Z]{2}"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Zrn">
<xsd:simpleType>
<xsd:restriction base="xsd:integer">
<xsd:minInclusive value="1000000"/>
<xsd:maxInclusive value="99999999999999"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
SQL> DROP TABLE RELATIE_DOCUMENTEN_TEMP
2 /
Table dropped.
SQL> BEGIN
2 DBMS_XMLSCHEMA.copyEvolve
3 ( schemaURLs => xdb$string_list_t(:schemaURL)
4 , newSchemas => XMLSequenceType(XDBURIType(:schemaPath).getXML())
5 , preserveOldDocs => TRUE
6 , mapTabName => 'RELATIE_DOCUMENTEN_TEMP'
7 , generateTables => FALSE
8 );
9 END;
10 /
PL/SQL procedure successfully completed.
SQL> CREATE TABLE relatie_documenten OF XMLTYPE
2 XMLSCHEMA "http://localhost:8080/xsd/relaties.xsd"
3 ELEMENT "Relatie"
4 /
Table created.
SQL> CREATE OR REPLACE TRIGGER upo_rdt_ai
2 AFTER INSERT ON relatie_documenten
3 FOR EACH ROW
4 DECLARE
5 doc XMLType;
6 BEGIN
7 doc := :new.SYS_NC_ROWINFO$;
8 XMLType.schemaValidate(doc);
9 END;
10 /
Trigger created.
SQL> declare
2 tablename varchar2(2000);
3 begin
4 select temp_tabname
5 into tablename
6 from RELATIE_DOCUMENTEN_TEMP
7 where table_name = USER || '.' || upper('relatie_documenten');
8 execute immediate 'insert into relatie_documenten select xmltype(data) from ' || tablename;
9 commit;
10 end;
11 /
PL/SQL procedure successfully completed.
SQL> select *
2 from relatie_documenten
3 /
SYS_NC_ROWINFO$
<Relatie>
<Voornaam>Johan</Voornaam>
<Achternaam>Hermans</Achternaam>
<Tussenvoegsel/>
<Geboortedatum>1978-01-02</Geboortedatum>
<Geslacht>M</Geslacht>
<Sofinummer>233300417</Sofinummer>
<Straatnaam>Stationstraat</Straatnaam>
<Huisnummer>10</Huisnummer>
<Woonplaats>Weesp</Woonplaats>
<Postcode>1383 AK</Postcode>
<Zrn>1234567</Zrn>
</Relatie>
<Relatie>
<Voornaam>Johanna</Voornaam>
<Achternaam>Gurts</Achternaam>
<Tussenvoegsel/>
<Geboortedatum>1975-11-12</Geboortedatum>
<Geslacht>V</Geslacht>
<Sofinummer>234109807</Sofinummer>
<Straatnaam>Stationstraat</Straatnaam>
<Huisnummer>10</Huisnummer>
<Woonplaats>Weesp</Woonplaats>
<Postcode>1383 AK</Postcode>
<Zrn>7654321</Zrn>
</Relatie>
SQL> INSERT
2 INTO relatie_documenten
3 VALUES (XMLType
4 ('<Relatie>
5 <Voornaam>Johanna</Voornaam>
6 <Achternaam>Gurts</Achternaam>
7 <Tussenvoegsel/>
8 <Geboortedatum>1975-11-12</Geboortedatum>
9 <Geslacht>O</Geslacht>
10 <Sofinummer>234109807</Sofinummer>
11 <Straatnaam>Stationstraat</Straatnaam>
12 <Huisnummer>10</Huisnummer>
13 <Woonplaats>Weesp</Woonplaats>
14 <Postcode>1383 AK</Postcode>
15 <Zrn>7654321</Zrn>
16 </Relatie>').CreateSchemaBasedXML(:schemaURL))
17 /
1 row created.
SQL> commit
2 /
Commit complete.
SQL> select *
2 from relatie_documenten
3 /
SYS_NC_ROWINFO$
<Relatie>
<Voornaam>Johan</Voornaam>
<Achternaam>Hermans</Achternaam>
<Tussenvoegsel/>
<Geboortedatum>1978-01-02</Geboortedatum>
<Geslacht>M</Geslacht>
<Sofinummer>233300417</Sofinummer>
<Straatnaam>Stationstraat</Straatnaam>
<Huisnummer>10</Huisnummer>
<Woonplaats>Weesp</Woonplaats>
<Postcode>1383 AK</Postcode>
<Zrn>1234567</Zrn>
</Relatie>
<Relatie>
<Voornaam>Johanna</Voornaam>
<Achternaam>Gurts</Achternaam>
<Tussenvoegsel/>
<Geboortedatum>1975-11-12</Geboortedatum>
<Geslacht>V</Geslacht>
<Sofinummer>234109807</Sofinummer>
<Straatnaam>Stationstraat</Straatnaam>
<Huisnummer>10</Huisnummer>
<Woonplaats>Weesp</Woonplaats>
<Postcode>1383 AK</Postcode>
<Zrn>7654321</Zrn>
</Relatie>
<Relatie>
<Voornaam>Johanna</Voornaam>
<Achternaam>Gurts</Achternaam>
<Tussenvoegsel/>
<Geboortedatum>1975-11-12</Geboortedatum>
<Geslacht>O</Geslacht>
<Sofinummer>234109807</Sofinummer>
<Straatnaam>Stationstraat</Straatnaam>
<Huisnummer>10</Huisnummer>
<Woonplaats>Weesp</Woonplaats>
<Postcode>1383 AK</Postcode>
<Zrn>7654321</Zrn>
</Relatie>
SQL>Here's the SQL, can you cut'n'paste and run the whole thing as XML_OWNER
var schemaURL varchar2(256)
var schemaPath varchar2(256)
begin
:schemaURL := 'http://localhost:8080/xsd/relaties.xsd';
:schemaPath := '/public/relaties.xsd';
end;
call dbms_xmlSchema.deleteSchema(:schemaURL,4)
declare
res boolean;
xmlSchema xmlType := xmlType(
'<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb"
elementFormDefault="unqualified"
attributeFormDefault="unqualified"
version="1.0">
<xsd:element name="Relatie" xdb:defaultTable="">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Voornaam" type="xsd:string"/>
<xsd:element name="Achternaam" type="xsd:string"/>
<xsd:element name="Tussenvoegsel" type="xsd:string"/>
<xsd:element name="Geboortedatum" type="xsd:date"/>
<xsd:element name="Geslacht">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:enumeration value="M"/>
<xsd:enumeration value="V"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Sofinummer">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="\d{9}"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Straatnaam" type="xsd:string"/>
<xsd:element name="Huisnummer" type="xsd:string"/>
<xsd:element name="Woonplaats" type="xsd:string"/>
<!--xsd:element name="Postcode" type="xsd:string"/-->
<xsd:element name="Postcode">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="\d{4} [A-Z]{2}"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Zrn">
<xsd:simpleType>
<xsd:restriction base="xsd:integer">
<xsd:minInclusive value="1000000"/>
<xsd:maxInclusive value="99999999999999"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>');
begin
if (dbms_xdb.existsResource(:schemaPath)) then
dbms_xdb.deleteResource(:schemaPath);
end if;
res := dbms_xdb.createResource(:schemaPath,xmlSchema);
end;
BEGIN
DBMS_XMLSCHEMA.registerSchema(
:schemaURL,
XDBURIType(:schemaPath).getClob(),
TRUE,
FALSE,
FALSE,
TRUE);
END;
DROP TABLE relatie_documenten FORCE
CREATE TABLE relatie_documenten OF XMLTYPE
XMLSCHEMA "http://localhost:8080/xsd/relaties.xsd"
ELEMENT "Relatie"
CREATE OR REPLACE TRIGGER upo_rdt_ai
AFTER INSERT ON relatie_documenten
FOR EACH ROW
DECLARE
doc XMLType;
BEGIN
doc := :new.SYS_NC_ROWINFO$;
XMLType.schemaValidate(doc);
END;
INSERT
INTO relatie_documenten
VALUES (XMLType
('<Relatie>
<Voornaam>Johan</Voornaam>
<Achternaam>Hermans</Achternaam>
<Tussenvoegsel/>
<Geboortedatum>1978-01-02</Geboortedatum>
<Geslacht>M</Geslacht>
<Sofinummer>233300417</Sofinummer>
<Straatnaam>Stationstraat</Straatnaam>
<Huisnummer>10</Huisnummer>
<Woonplaats>Weesp</Woonplaats>
<Postcode>1383 AK</Postcode>
<Zrn>1234567</Zrn>
</Relatie>'
).CreateSchemaBasedXML(:schemaURL))
commit
INSERT
INTO relatie_documenten
VALUES (XMLType
('<Relatie>
<Voornaam>Johanna</Voornaam>
<Achternaam>Gurts</Achternaam>
<Tussenvoegsel/>
<Geboortedatum>1975-11-12</Geboortedatum>
<Geslacht>V</Geslacht>
<Sofinummer>234109807</Sofinummer>
<Straatnaam>Stationstraat</Straatnaam>
<Huisnummer>10</Huisnummer>
<Woonplaats>Weesp</Woonplaats>
<Postcode>1383 AK</Postcode>
<Zrn>7654321</Zrn>
</Relatie>').CreateSchemaBasedXML(:schemaURL))
commit
INSERT
INTO relatie_documenten
VALUES (XMLType
('<Relatie>
<Voornaam>Johanna</Voornaam>
<Achternaam>Gurts</Achternaam>
<Tussenvoegsel/>
<Geboortedatum>1975-11-12</Geboortedatum>
<Geslacht>O</Geslacht>
<Sofinummer>234109807</Sofinummer>
<Straatnaam>Stationstraat</Straatnaam>
<Huisnummer>10</Huisnummer>
<Woonplaats>Weesp</Woonplaats>
<Postcode>1383 AK</Postcode>
<Zrn>7654321</Zrn>
</Relatie>').CreateSchemaBasedXML(:schemaURL))
commit
declare
xmlschema xmltype;
res boolean;
begin
select xdburitype(:schemaPath).getXML()
into xmlSchema
from dual;
dbms_xdb.deleteResource(:schemaPath);
select insertChildXML
xmlschema,
'/xsd:schema//xsd:element[@name="Geslacht"]/xsd:simpleType/xsd:restriction',
'xsd:enumeration',
xmltype('<xsd:enumeration xmlns:xsd="http://www.w3.org/2001/XMLSchema" value="O"/>'),
'xmlns:xsd="http://www.w3.org/2001/XMLSchema"'
into xmlSchema
from dual;
res := dbms_xdb.createResource(:schemaPath,xmlSchema);
end;
commit
set long 100000 pages 200 lines 140
select xdburitype(:schemaPath).getXML()
from dual
DROP TABLE RELATIE_DOCUMENTEN_TEMP
BEGIN
DBMS_XMLSCHEMA.copyEvolve
( schemaURLs => xdb$string_list_t(:schemaURL)
, newSchemas => XMLSequenceType(XDBURIType(:schemaPath).getXML())
, preserveOldDocs => TRUE
, mapTabName => 'RELATIE_DOCUMENTEN_TEMP'
, generateTables => FALSE
END;
CREATE TABLE relatie_documenten OF XMLTYPE
XMLSCHEMA "http://localhost:8080/xsd/relaties.xsd"
ELEMENT "Relatie"
CREATE OR REPLACE TRIGGER upo_rdt_ai
AFTER INSERT ON relatie_documenten
FOR EACH ROW
DECLARE
doc XMLType;
BEGIN
doc := :new.SYS_NC_ROWINFO$;
XMLType.schemaValidate(doc);
END;
declare
tablename varchar2(2000);
begin
select temp_tabname
into tablename
from RELATIE_DOCUMENTEN_TEMP
where table_name = USER || '.' || upper('relatie_documenten');
execute immediate 'insert into relatie_documenten select xmltype(data) from ' || tablename;
commit;
end;
select *
from relatie_documenten
INSERT
INTO relatie_documenten
VALUES (XMLType
('<Relatie>
<Voornaam>Johanna</Voornaam>
<Achternaam>Gurts</Achternaam>
<Tussenvoegsel/>
<Geboortedatum>1975-11-12</Geboortedatum>
<Geslacht>O</Geslacht>
<Sofinummer>234109807</Sofinummer>
<Straatnaam>Stationstraat</Straatnaam>
<Huisnummer>10</Huisnummer>
<Woonplaats>Weesp</Woonplaats>
<Postcode>1383 AK</Postcode>
<Zrn>7654321</Zrn>
</Relatie>').CreateSchemaBasedXML(:schemaURL))
commit
select *
from relatie_documenten
/ -
Error in Start Variant : NO_MORE_SPACE: Can not create MTE: no more space:
Hi All,
All the start variants of the process Chains, getting the error " NO_MORE_SPACE: Can not create MTE: no more space: no more MESSAGE_CONTAINER slots available. ". But the process chains were being completed successfully.
Start process job is released at 5.00 Clock every day, it takes 1 hour to complete the start process job, when I checked the job log for this process, i am getting the above said error.
Going through the previous threads, I tried few options like utilization of table space etc. here I dont have any problem related to table space.
Please assist me in solving this problem.
Thanks in Advance
SreekanthHi,
As per my analysis...i guess there is no space to maintain the logs in ur system...
For this u have to delete the old logs in ur system from SM37...
U can do by a program for the same, basis team will handle these type of performance issues....
Pls have a talk with them....
On the error in dispaly messages also u can go thru long text there it'll give the detailed descrition....
rgds, -
Yoga 11 - can not create an account for the App store,
I can not create an account for the App store, I live outside of the USA and the only address option is in the USA. Can you help me
Moderator Note: Edited subject to match content.Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
I have verified the Microsoft windows 8 app store has different regions listed
And you can connect app store using an existing Microsoft account like Hotmail, msn etc.
Please refer below link
http://windows.microsoft.com/en-US/windows-8/explore-windows-store#1TC=t1
Also if you can share the link or screen shot of the app store to help you further
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español -
Admin Tool can not create any new database or model [nqserror 46131]
Hi everyone!
I can not create anything new in each layer on the admin tool. It marks unknown error.
When I try to import metadata it send the message: [nqserror 46131] unresolved hostname, everything in online mode. I can modify everything offline, then replace the rpd and I can create reports in Answers. But I need to do all of these online mode.
Everything else works well (Answers, Dashboards, Publisher). The server name is correctly put in the instanceconfig.xml.
OBIEE Version: 11.1.1.6.0 (upgrade recently from 11.1.1.5). The scheduler does not start since migration.
Server OS: Red hat enterprise edition
Regards,
Edgar Tercero
Edited by: 958457 on 11-sep-2012 12:04
Edited by: 958457 on 11-sep-2012 14:13Thanks but it not solve my problem.
I detect no problem in my enviroment variables in the bi-init.sh
This is what my admin tool log says:
[OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 690] [nQSError: 43113] Message returned from OBIS. [[
[nQSError: 46131] Unresolved host name: vrnmobiee. Could not get details about the specified host]] -
Error in ALE service 29 Could not determine recipients for message type MAT
Hi Experts,
While transferring the material using ALE am getting error 29 ie 'Error in ALE service' and message is 'Could not determine recipients for message type MATFET'.
Also i ve recieved the materials with the proper status al the end am getting the above error.
Kindly help me out.
Thanks in advance.Hi ,
Status 29 means " partner profile not found " . Please check if the recieving partner is configured properly in WE20 in sender system.
Also make sure that the Port and RFC definations are also completed. If the IDoc is manually triggered then please make sure that control record parameters of the idoc are properly filled - if we miss the details ( like wrong port given , wrong basic type for message type - or extended message type ) then also the idoc will fail in status 29 even though the partner profile is properly configured .
Since your idoc is getting generated i think no issues with BD64 since already interested recipeints were populated in control record of idoc.
Regards
Vikas Chaudhary -
CF9 Problems with Select * query, resulting in Value can not be converted to requested type.
So, I work on a legacy CF web site and there are numerous SELECT * FROM USERS_TABLE queries all over the site.
Well, we changed the structure of said table in the database on our Testing and Staging sites, with no issues.
When we pushed up to our production environment and changed the structure of the production DB table, the server kept kicking back "Value can not be converted to requested type."
After doing some searching out there, it looks like CF caches the structure of the table, and you either have to restart CF to clear it, or rename and then name-back the DSN to fix the issue.
http://www.bennadel.com/blog/194-ColdFusion-Query-Error-Value-Can-Not-Be-Converted-To-Requ ested-Type.htm
That said, this doesn't happen in our testing and staging environments - so what would be the difference?
Is there some setting I need to change in the CF Admin to keep this from happening again?Also, if you can use a Stored Procedure to retrieve the data, do so. Standard queries gets all the information, anyway, chokes bandwidth passing it all to the CF server, and forces the CF server to filter, sort, and format the data. SPs tell the db server to get ONLY the data requested, and forces the db server to filter and sort the data, leaving only formatting to the CF server.
That's not true. The only time CF messes with data returned from the DB is if there's a maxrows attribute, and the record set returnded from the DB has more than that number of records... which causes CF to truncate the recordset to the correct size before returning it. The DB might or might not stop sending rows down to CF after CF says "yeah, I've got all I want now".
Other than that, for all intents and purposes all CF does with the SQL is pass it to the DB and wait for an answer. The only thing it does to the returned data is to create a CF record set ("query") with it... this does not involve any filtering and sorting.
Adam -
FCN Document not created for SO : Message SY499-Urgent
While Saving delivery or doing PGI or while processing billing document i am getting below info message.
"FCN Document not created for SO " Message SY499.
I dont know why this message started coming now. I have added my country in VI49 settings. I wonder that due to that this message is coming.
I dont want this message to come whiel delevery processing. Pl. let me know how can this be possible.
Regards,
VijayHello Sheila,
sorry - my first answer was in mistake - Status K means:
"The transaction is processed using payment cards. The order, however, does not contain valid authorization.
This problem occurs in billing documents for follow-up deliveries."
Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
and trigger this via VF02 -> Release to accounting.
Regards Wolfgang -
Could not determine recipients for message type HRMD_B
Hi,
I am getting below Error in SRM when transferring Org Structure data from HCM system to SRM system in a Idoc. I am using Message type HRMD_ABA and not HRMD_B. I didn't maintain Distribution model for HRMD_B. But in my IDOC status I am seeing below error message for Message type HRMD_ABA Inbound to SRM.
Only I am seeing HRMD_B message type in transactions WE81 and WE82.
Any idea? I appreciate your help.
Could not determine recipients for message type HRMD_B
Message no. B1003
Diagnosis
An IDoc of message type HRMD_B was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Thanks,
ShearsHi Shears
Did you find soulution to your issue ??
thanks
Anup -
Message no. B1003""Could not determine recipients for message type ACPJMM""
Hi All,
While posting GR in MIGO, an error is showing. I am attaching the error description.
""Could not determine recipients for message type ACPJMM""
Message no. B1003
Diagnosis
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Yesterday it was not coming and GR was getting posted.. I was doing configurations for CIN and day before yesterday everything was done,all the registers were getting updated. For that I did many customisation in SPRO. I did settings in tax ion goods monement. and in Material master to assign screen sequence for foreign trade data screen. Is any customozation triggerring IDoc? Earlier also this came, that time we got client copy, but the problem is recurring. Its very urgent as we are going to transport SPRO settings to production.
Solutions will be rewarded.
regards
B Shar
Edited by: Ian Wong on Jul 4, 2008 4:48 PMHi
If you are not working with ALE & this message comes, then somone has mistakenly activated ALE linkages for IDoc Output in Accounting.
if you want to keep this active & go forward, you need to complete the Distribution model customizng in BD64.
Thanks & Regards
Kishore
Maybe you are looking for
-
Windows Media Player no longer working on windows 7
A year or two ago Windows Media Player stopped working. When I tried to open it, it wouldn't do anything, it wouldn't open. In a windows update, I got zune. Zune isn't exactly easy to use, I like media player better. But it won't work, please fix it!
-
My font in my contact list changed overnight to tiny. Why? And why can't we control our own font in Skype contact lists? How can i fix this?
-
Hi, how can I set a GROUP BY in my Spry-Dataset? I got lots of <city> tags that sometimes contain the same city. And I dont want them all to be shown in the list only 1 time. Thanks for help, Denis
-
Table to find the list of shopping carts
Hi SRM Gurus, could you please guide me is there any table if i want to find the shoppingcart cart list for the particular catagory,particular vendor lke that. Correct answer will be apprecitable. Thanks In Advance Kala
-
Changing folder order in project
This may be a dumb question, but is there a way to rearrange the order that the folders show up in a project tree? It seems by default CVI has them in the order of "User Interface Files", "Source Files", "Include Files", which is fine. However, I h