Can not Delete Data in SEM-BCS

Dear Expert,
I do the following steps :
1. Created Consolidation groups in workbench ( I was not assigned it to anywhere)
2. Save.
3. Deleted Consol group above.
4. WHen i tried to save, There are errors that said "The data model contains inconsistencies. These have to be cleaned up before you proceed." . And then i click button "Full Display" but the result said : "Data is Consistent. SYnchronzation not neccessary".
How do i delete data in workbench? because i cannot delete master data that i created in workbench.
Please advice.
Thanks in advance.

Hi,
Actually, yes, you may delete master data in BW and then syncronize them with BCS.
The name of the infoobject containing master data for cons group you may see in your data basis, on the tab strip showing roles assignment (swithing on the tech names).
Execute RSA1 t-code. Find in infoobjects, the IO for cons groups, delete its master data.
SE38 t-code, program name = UGMDSYNC. Choose the cons group IO; set source = your BW system name; set target = local. Execute syncronization.
After that the data for cons group in BW and BCS will be equivalent.
Best regards,
Eugene

Similar Messages

Can not delete data from table which is queried in my stored procedure

Hi,
Anyone knows how to fix it:
I have a table. In a stored procedure, I have a simple query running on this table.
When I want to delete one record from that table, I got error message:
ORA-04091: table *** is mutating, trigger/function may not see it.
Thanks first.

Rick, the only time you should get a mutating table error is when a trigger is involved. FK problems have separate error codes (and would be a different problem than the one that started this thread). Using a DBA id check all the tables subject to DML by your function and by whatever calls your function for triggers. Only the owner or a DBA can see the existence of triggers on a non-owned table. This has caused some of the developers I work with to think tables that had triggers do not have them since they do not work under the owning or a DBA ID.
By your description of what you are trying to do in the function we do that all the time without problem.
How large is the function? How/When is it called?
Mark D Powell

Epub books show up in ipad on itunes but do not show up on ipad. Also can not delete the books from ipad in itunes

epub books show up in ipad on itunes but do not show up on ipad. Also can not delete the books from ipad in itunes

You have no choice but to lose your data back to the last backup you made.
Here's how to do the recovery. Note you may have to try to get into recovery mode more than once to succeed:
HT1808
I'm sure next time, you'll be more vigilant about keeping current backups.

How can i delete data in psa and how can i partation psa?

hi friends,
can i delete data from psa and how can i partation psa?
Thanking u
suneel.

hi Suneel,
http://help.sap.com/saphelp_nw70/helpdata/en/7d/724d3caa70ea6fe10000000a114084/frameset.htm
Using partitioning, you can separate the dataset of a PSA table into several smaller, physically independent, and redundancy-free units. This separation can mean improved performance when you update data from the PSA. In the <b>Implementation Guide with SAP NetWeaver > Business Intelligence > Connections to Other Systems > Maintain Control Parameters for Data Transfer</b> you define the number of data records needed to create a new partition. Only data records from a complete request are stored in a partition. The specified value is a threshold value.
transaction SPRO to go implementation guide
at database level
http://help.sap.com/saphelp_nw70/helpdata/en/33/dc2038aa3bcd23e10000009b38f8cf/frameset.htm
If you are using this database you can also partition PSA tables. You first have to activate this function using RSADMIN parameter DB4_PSA_PARTITIONING = 'X'. SAP Note 815186 includes more comprehensive information on this.
hope this helps.

I can not delete or copy new files to my Iomega external hard drive

Hi,
I can not delete or copy new files to my Iomega external hard drive. Opening hard drive folder I can see that I can not overwrite it. I have heard that I need to install some program for the external hard drive to operate properly in Mac.
Please help what to install or there is some other option.
Thnx

I'm not the expert on this since I have never done it. It sounds like you may need a data rescue program like Data Rescue III. I believe you can download a demo and see if you can see the files. If you can, then you can buy the program and retrieve the files. I don't know if Disk Utility can restore them--I think they have to be visible but this is not something I have ever had to do.
In the meantime, don't do anything with the drive--you don't want to overwrite any files. Hopefully all or most of the files are still there and you will be able to retrieve them. The less the drive is used, the better your chances are of retrieving the data.
Forgive me for not realizing that there were files on the drive that you wanted to save. Upon re-reading your question, I now see that there were. I should have known to warn you, and my bad that I didn't.
Good luck!

I can not delete unwanted message because I am not getting the delete button popup to activate deletion. Where did it go!?

I can not delete unwanted emails because my delete prompt button is not appearing after I prompt edit and choose my email to edit. How do I make the prompt button to appear on edit page as before? Thanks MRH

Close out of the mail app, double tap the home button and completely close out of the app.
then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
then check and see if you can delete emails.

I can not delete an email I get a message218130.emlx" couldn't be copied because you don't have permission to access "Messages"

I can not delete an email I get a message218130.emlx” couldn’t be copied because you don’t have permission to access “Messages”

Actually, the Finder solution did not work for me, but here's what did:
Quit Mail (for safety's sake).
Open Terminal (it's in Utilities folder usually, but since I updated to ML it's in a folder called Other for some reason)
Once Terminal is open, you'll want to login as ROOT. You do this as follows:
Type
sudo -i
Then hit Enter/Return. You'll be promoted for your system password. Hopefully you'll remember it. Enter your password then hit Enter/Return.
You'll then be at what's known as a root prompt.
At this point BE VERY CAREFUL. You have the ability at this point to completely destroy your machine beyond repair. Only type what I list below:
To find the folder that contains the email message you'll need to type the following:
find . -name "218130.emlx"
Hit Enter/Return
This will take a minute or two but what should appear in the list of other items that appear is something along the lines of the following (it won't be exactly this but will look LIKE this) I've replaced some personally identifying info:
./Users/yourname/Library/Mail/V2/POP-youremailaddress@yourmailserver/INBOX.mbox/ 0355DF0D-5E99-4798-B79E-48D71E68AF34/Data/3/2/Messages/23219.emlx
This line describes the location of the offending email. You know what to put yourself into this directory:
cd /Users/yourname/Library/Mail/V2/POP-youremailaddress@yourmailserver/INBOX.mbox/0 355DF0D-5E99-4798-B79E-48D71E68AF34/Data/3/2/Messages/
Hit Enter/Return
Notice, I left of the name of the actual email address. You'll need to be sure you type the location EXACTLY or this won't work. You want to be in the Messages folder. You'll know you're there because your Terminal prompt will look something like this:
Your Name - iMac:Messages
Then just to be sure you're in the right place, type
ls
Hit Enter/Return
You should then see something like this:
iMac:Messages root# ls
23013.emlx 23096.emlx 23100.emlx 23156.emlx 23210.emlx 23213.emlx 218130.emlx
You'll see the offending message. Now, you delete ONLY this message. Type:
rm -f 218130.emlx
That's RM at the start above. You'll need to type it in lower case. Be sure that's all you type.
Hit Enter/Return
You'll should be disappointed at the results because it will look like nothing happened. You can hit ls and Enter/Return one more time and the offending file should be gone.
EXIT TERMINAL. DO NOT TYPE ANYTHING ELSE. DO NOT "POKE AROUND". THIS IS NOT THE PLACE TO EXPLORE. SERIOUS SYSTEM DAMAGE CAN BE CAUSED FROM HERE. EXIT TERMINAL NOW.
Now re-open Mail - the message will still appear to be in there, but magically, you can delete it. you can also delete it from your Trash for good measure.

Can not delete an empty email

Morning.
I've found an empty email in a local mailbox. In the headers viewer only »Today« is displayed as »Date received«, no subject, no sender, nothing else, and no content.
Mail.app can not display the raw source of this emails and no long headers. And -- most curious -- I can not delete this email. If I try so, the email disappears for a snatch but re-appears instantly.
I've rebuild the mailbox for two times, but the culprit won't disappear.
What can I do to fix this problem?
TIA and kind regards, Friedrich

vatolin wrote:
I've rebuild the mailbox for two times, but the culprit won't disappear.
A third rebuild of the mailbox did fix the problem.
For whatever reason.

How do I delete partially installed apps. I erased iPad and installed iOS8. I installed new apps. Suddenly all paged populated with old apps that never install and I can not delete.

How do I delete partially installed apps. I erased iPad and installed iOS8. I installed new apps. Suddenly all paged populated with old apps that never install and I can not delete.

Hi Try a Reboot press power & menu button hold both down until you see the Apple Logo you will not lose any data But you me need to do this more than once. Cheers Brian

Can not delete Fox news icon from Safari Favorites Bar, keeps coming back

I can not delete "Fox news" icon from Safari Favorites Bar. Dogpile Search engine also. Both keep coming back with icons upon new opening of Safari.
I have removed these icons from the Book Mark files and Favorites Bar menu and any reference in the LIbrary and replaced them with less spammy evercookie news and search engines 3 times to no avail. I just upgraded Safari (April 2014) and it made no difference. These sites represent the paradigm I
no longer am putting energy into nor want which is why I have rid these increasing more corrupted and cookie agressive sites. But now.....
they won't let me go!! Any one no how?

Thank you for trying but no not the problem. Had the same problem with Iphone 4S. Would not connect to my mail server and tried to send me to fraudulent website in the UK/England.
I did a restore to factory restore to the phone with upgrade to newest operating system, my was up to date until OS 7 as I heard there were problems. Now it has OS 7.
Neither I nor verizon could get the phone up and connected for service again. Taking phone to
apple store on Tues.
I am suspecting the "heart bleed" vulnerability.

We can not delete record by procedure

Hi All,
We can not delete record by procedure, please suggest us, our program is following:
create or replace procedure pro_del (p_id IN employee.id%type)
IS
begin
delete from employee
where id = p_id;
end;
execute pro_del(01)
your suggestion would be greatly appreciated.

user13842301 wrote:
Hi All,
We can not delete record by procedure, please suggest us, our program is following:
create or replace procedure pro_del (p_id IN employee.id%type)
IS
begin
delete from employee
where id = p_id;
end;
execute pro_del(01)
your suggestion would be greatly appreciated.As you have not provided the sample data, I have created a sample dataset to demonstrate.
SQL> select * from test;
        ID        SAL
         1       1000
         2       2000
         3       3000
         4       1000
SQL> create or replace procedure pro_del (p_id IN test.id%TYPE)
2 IS
3 begin
4 delete from test
5 where id=p_id;
6 COMMIT;
7 END;
8 .
SQL> /
Procedure created.
SQL> exec pro_del(1);
PL/SQL procedure successfully completed.
SQL> select * from test;
        ID        SAL
         2       2000
         3       3000
         4       1000As you have not handled any exceptions in your pro_del procedure,probably you might be passing invalid id in procedure call
Hope this helps
Regards,
Achyut

Can not delete i cloud id with out pass word i see the same problem in the postings i guess there is no fix for the problem

changed apple id now i can not get in to icloud can not delet it with with out old password. i read several posting on the same problem but no fix i guess apple cant fix it.

Hello catfish17,
Thank you for the question. It sounds like you changed your Apple ID and are trying to log into iCloud with your new Apple ID.
It sounds like you are trying to follow these steps to change your logged in Apple ID, but you do not have the password for the old Apple ID:
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
I recommend following the steps in the article below to reset your Apple ID password for your previous Apple ID:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can not find data in virtual cube

Experts,
I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
Can anybody tell me what could be the reasons the data is coming through Virtua cube.
Thanks,
AK

Hi,
i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
regards
Siggi

Can not receive data 10054

My version of Essbase is 6.5.1.4. On the server machine it self when I am adding members to outline I get "Can not receive data 10054". To resolve this problem I tried to increase the server page file size but the problem persist.Does anyone know a solution to this problem?SAK

How exactly are you retrieving data; is it smartview, excel addin, forms, reports etc ?

Can not extract data into BW from SQL SERVER

Dear All,
I meet a problem to extract data from database(MS SQL Server 2000(sp3)) into BW now and can not extract data into BW ODS, even PSA, In the monitor, display yellow light(0 from 0 record), detail message just display message "data request arranged" "confirmed with: confirmation" in requests(message) step; "missing message: request received" in extract (message) step; "no data" in processing(data packet) step and so on. but in fact, there are two records in my database test table and DB connection is OK. Even I can extract data from another test oracle database into BW ODS successfully.
Our BW system has two BW applicaton server and use oracle database. the one application server locates on IBM AIX host. the another one locates on one NT server. the application server on NT server is used for data extration from MS SQL SERVER database into BW oracle database. and MS SQL SERVER and NT platform application server locate on same one host. DBSL was installed on the NT application server already. and DB connector also was created successfully for MS SQL SERVER and datasource also was generated. DBSL type is Kernel640-WIN-IA32bit-unicode. my BW system is ECC5.0/UNICODE/ORACLE. all table/view/field name of MS SQL server is upcase and have not any specific character. for example: ZDEMO etc.
wait your help.
Thanks in advance.
Billy

Hi Ravi,
Could you help me to get knowledge about the followings:
approximately how many records extracting and transfering from SAP R/3 to BIW in an organisation. for that how much time will take .
How to extract data from two are three source system to BIW. Kindly help me with step by step explanation .If any screen shots with documents pls fwd to my ID. "[email protected]"
Your help highly appreciated.
Thanks.
Hema

Can not Delete Data in SEM-BCS

Similar Messages

Maybe you are looking for