Can not detect wireless card

WRE54G / Win XP SR2
My laptop and PDA can connect to the network wirelessly with no problems.
Trying to connect my WRE54G to my network. On every attempt at AutoConfigure nothing happens. Have disabled router security and 'SPI Firewall' (whatever that is). Still nothing. Have disabled router security and 'SPI Firewall' (whatever that is), and McAfee Firewall. Still nothing. I have moved the WRE54G to within ~4 feet of the router and tried everything again. Still nothing.
I have tried Setup but when I hit 'Next' I get the popup "Can not detect wireless card."
Have tried a reset and have unplugged/replugged the WRE54G. FWIW, the WRE54G 'Link' light blinks blue once for about a second and turns a constant red. The 'Activity' light blinks blue twice quickly about every 5 seconds. Nothing on my PC shows any response.
What is the wireless card that can't be found? The WRE54G?
How do I resolve this?
33#44

this worked for me too. Although I was never able to use the cisco install wizard successfully. I am using WEP security on my access point. I took the following steps.
1. From laptop, connect to network wirelessly with WEP security settings in place
2. From laptop, open browser, go to: 192.168.1.1, select wireless security, disable wireless security
3. From Range Extender, hold auto-configure button. It took me multiple attempts (~5) and it connected so the 'Link' light changed from red to a consistent blue.
4. From laptop, disable security for the access point (via control panel, wireless network connection settings)
5. From laptop, connect to wireless access point (via control panel, wireless network connection settings). test internet connection. Internet should work.
6. From laptop, access range extender web utility. open browser, got to 192.168.1.240, enable security, input desired WEP security settings/passphrase.
7. From laptop, enable wireless security for the access point. from browser, go to 192.168.1.1, select wireless security and enable it. use the same settings from step 6 (from the range extender).
8. From laptop, update wireless adapter settings to connect using the same security settings (eg. passphrase) from step 6/7.
range extender, access point and wireless adapter/laptop should all be connected.

Similar Messages

IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

Guys I really need your advice please...
I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
Thanks in advance.
ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

rzulfikar wrote:
Thanks Chris for your solution.
But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
The problem is not about upgrading an iPhone to a newer version of iOS. Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes. You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it. Your choice, your decision, your consequences.

T61 7661-HM5 New - Can not dectect wireless card ???

I have a new laptop T61 7661-HM5 with Product Infomation:
Based on 7661-CTO: T7300(2GHz), 2GB RAM, 60GB 5400rpm HD, 14.1in 1280x800 LCD, Intel X3100,
CDRW/DVDRW, Intel 802.11agn wireless(disabled),
Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, 6c Li-Ion, WinVista Business 32
Currently I installed driver wireless card at:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67256
I turned on button SWITCH ON on laptop and enable Wireless Radio ON in BIOS but It can't dectect
wireless card.
How can enable Wireless internal card on this laptop ???
Please help me !

Remove the driver and install this:
Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - Thin...
Did you install the Vista Service Packs? Some Drivers and tools require service packs.
Also have a look to the requirements
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

The operating system can not detect my wireless device!

Hi all,
I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

TS1589 when I open airport utility it performs a scan and then say it can not detect a wireless device. The rest of the screen is blank; all menus are blanked out. What do I do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

Windows7 64-bit can not detect my creative sb live 24-bit 7.1

>windows7 64-bit can not detect my creative sb li've 24-bit 7. windows7 can not detect my creative sb li've 24-bit 7.
I tried every thing
updated my bios
tried in device manager
tried in any mode you like
tried to install the latest drivers that support windows7
but windows 7 64-bit's actually can not see any sound card install in pci
while windows XP and Vista and and and can see the card and work just great
just cant
Microsoft says its creative problem
creative says it is microsoft problem
I dont care whos problem is this
Just want my card to work
Dont ignore this thread cause I am not the only one who suffer this problem .
any one knows what to do? what is the problem?
is there any problem between creative and microsoft that I am paying the price for their problems.
Just tired and want the solution

I tried every thing
updated my bios
tried in device manager
tried in any mode you like
tried to install the latest drivers that support windows7

Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards

Hi,
My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 21fa
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: mei
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Lenovo Device 21f3
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i801_smbus
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
Subsystem: Lenovo Device 21fa
Kernel driver in use: sdhci-pci
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
Kernel driver in use: rtl8192ce
lsmod | grep sd
sd_mod 29560 4
scsi_mod 133434 2 libata,sd_mod
sdhci_pci 10834 0
sdhci 23695 1 sdhci_pci
mmc_core 82791 2 sdhci,sdhci_pci
Nothing new happens if I type dmesg | tail after inserting a card.
I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
Thank you!
Last edited by Fayden (2012-12-22 05:13:09)

In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
Install it and enables it with systemd and it should work correctly!

Windows 7 Not Detecting Nvidia Card. Gt70 670MX GPU.

So I downgraded from windows 8 to windows 7 and have recently discovered my computer is using the Intel HD 4000 instead of the correct Nvidia 670MX. When I disable the Intel Hd the system restarts and displays stuff but the nvidia program says it can not detect an nvidia gpu. When I re enable, the nvidia driver detects the gpu but does not use it (directx diag shows the intel hd 4000). Any help would be greatly appreciated because I would hate to have to reformat back to windows 8.

Dxdiag will not use the NVidia card. Ignore it, as it's stupid to rely on it for anything.
You can't use the NVidia card 100% of the time. You need to use the Intel HD4000 when you're not gaming, as that's what it's meant for with Optimus.
Sometimes you need to make sure that it is switching to the NVidia card when you need it for a game or for whatever it is you're doing that you need it. This usually involves making a custom profile within the NVidia control panel. I have not played a game yet where I did NOT have to add it. I'd add it anyway, just to be sure that it's working correctly. Once you add the game, and tell it to use the NVidia high performance adapter (instead of the Intel integrated adapter), it should work just fine and hopefully increase your FPS.

Z77A-G45 will not detect video card.

I though that I was having trouble with a new gtx 760sc, so I RMA'd it. On-board video works fine. Still can't detect video card. Bought a new power as well(antec HCG-750). After i received the new video card and still had the same issues I tried out other video cards. Tried two different nvidia cards. One was a 4 series and one a 5 series. Tried in both pci-e slots, and yes the correct power cables were plugged in.

CPU looks fine.
Was finally able to breadboard the thing today. Had the same issues at first. Then I tried the third pcie slot and got post. This one is pcie2.0, so I tried the other slots again. Was able to get the 760 to boot on th second pcie slot. Put the mb back in the case and lost boot on card again. Reseated, same issue. Breadboarded and was able to get the card to post. Still no post in case. Can't see what could be causing a short. Rearranging the risers right now to see if is one of the risers causing a short, or maybe not enough clearance. Any other suggestions would be appreciated.

BlackBerry Z10 Second can't detect Sim card

Hi All
I just bought a Blackberry Z10, secondhand from people I met from Internet
The Blackberry is still kinda new, used only for a month. And I got it pretty much cheaper
But the problem is, this Z10 can't detect sim card (yes the previous owner been telling about this before. She said its happened after she's upgrading the software)
So, I bought it, and re-installed the software (10,2 - 10,3 - even back to 10,1) still not working.
I'm trying to search the similar issues on Google, and found that it possibly because the simcard reader is broken
I check the simcard reader, I'm not really sure, but yes, seems there one pins missing on there. I saw only 3 pins on my Z10 simcard reader. Haven't seen any other Z10. Would you mind to check your Z10? How many pins on there?
And also, does the warranty will cover this issues if I claim it? I mean, it seems because human-error (previous owner might put the sim card not really carefully).
If not, how much it cost to fix it and change the simcard reader part? Well think I'm not gonna gambling anymore to buy a cheap gadget in the hope I can't fix it by myself
Thank you for help!

Hi Aliarroughi
Z10 I have a 3 sim card reader. there seems to be damage to your z10 sim card reader. try to correct the sim card reader price only $ 25
Ades Ganteng

Windows 10 elitepad in Dock can not detect VGA monitor

Windows 10 will not detect my external monitor. I loaded Winbdow 10 on elitepad 1000 about 2 days ago. This is the first time I've tried to use my extenal monitor. My elitpad is in the elitpad docking station.  The tablet id also in the expansion Jacket.  Under windows 81. I was able to duplicate my tablet display on to the external monitor over the VGA jack in the dock. Now tablet can not detect the VGA monitor.      The monitor is an HP2065 using the HP provided VGA to DVI cable.   I've tried rebooting with the monitor diconnected and then adding plugin it in . I've run the detect monitor several times.   Any one got a solution. The new HP support page does not even list tablet as an option for display support. Thank you

            Ok, thats the procedure I was talking about earlier. I did that bios default factory reset just now. First the version 6 and earlier. It didn't work so I tried version 7 and later and that didn't work. I then tried version 6 and earlier again only this time pushed F10 more rapidly and got right in right when I got to the F5 and enter portion. Then I pushed F10 again to save the change and enter again to close. The PC didn't boot up the next screen like the test said it would. So I did it all again and spent some time reading what was on the bios pages but accidently pushed ESC as the bios menu suggested instead of enter to close out   . No boot up screen again. I did another hard shutdown and then unplugged the cord for 5 minutes and this time the PC stayed off when I plugged it back in. The bios are set to default but I cannot get it to start again in safe mode or boot up. So if the power supply is working properly, and the monitor worked in safe mode, then the video card must be good. right?
          So I'm editing from the night before, its Monday morning here in Wi. and I'm sorry to say that after leaving the PC unplugged all night that when I plugged it back in this morning, the dumb thing started again without pushing the  start button.  So the only thing doing a recovery on the bios accomplished was to prove that my the video card can run the monitor in safe mode which is a good thing I guess. Hope someone has an idea as to what else I can try.-------thanks

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Airplay can not detect apple tv

Airplay mirroring can not detect apple TV.
I upgraded to mountain lion this morning and the air play icon appears on my macbook pro but it can not detect my apple tv. Apple tv is running 4.4.4 gen 2.
Any ideas?
Here's the interesting part, when I disable airplay on the appleTV the icon on my macbook disappears and vice versa.

4.4.4 is old. It may be the reason but I can't confirm as my AppleTVs are 5.0+ and none of my Macs can Airplay.

Can not detect wireless card

Similar Messages

Maybe you are looking for