Can not do an installation on my newer mac.

I recently bought a new mac and transferred all my files and data over from my old mac.  CS5 did not work and prompted me to re-install the software.  I put in the DVD, double-clicked the INSTALL icon and nothing happens.  I double-clicked it several times and nothing launches, nothing happens.  I've already trashed the old software.  What do I do?

Run the cleaner tool and start from scratch. You busted your own *** (you know what I mean) by using the migration procedure.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS5 products
Mylenium

Similar Messages

  • Why I can not install the iTunes to my new 64bit laptop??? I have never had this kind of problem before on my 32 bit old laptop...

    I would like to get a help... I can not install the iTunes to my new (64bit) laptop... Why??? The installation stops somewhere after a few minute, looks like trying to install but can not go through until the end. I had my old (32bit) laptop and i have never had any problem with the installations... My new laptop is Asus (64bit), and the operating system just upgraded from Win8 to Win8.1....

    Hello rafaelfromweymouth
    Start with the first article and clear out any files in the Temp folder. You may need to remove iTunes and its related software and finally make sure that you have the 64-bit version of iTunes downloaded to install.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    iTunes 11.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Regards,
    -Norm G. 

  • I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

    I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
    Solved!
    Go to Solution.

     Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
     Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
     You can find more details about this issue in this KB:
    KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
    And for keeping a copy here is more info:
     How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • I can not delete my history and adding new bookmarks. Upgrading to later Firefox versions and/or re-installing didn't help. The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.

    I can not delete my history and adding new bookmarks.
    Upgrading to later Firefox versions and/or re-installing didn't rectify it either.
    The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.
    Also, I have noticed that every once in awhile you can not close tabs you've opened, either by pushing on the X button and/or clicking on the mouse to close it. Although closing the window and opening it again (without closing the Firefox application) seemed to rectify the problem in the short term, it's becoming quite annoying.
    == This happened ==
    Every time Firefox opened
    == the Firefox is being used

    I think I have a solution.
    First, download the add-on SQManager. This should be included with FireFox, it is really good.
    Look for the file '''moz_hosts''' in the folder '''places.sqlite'''.
    Don't delete the file, just delete the information in the file. My file has over 3600 websites, which go back years!! I did not know they were there, but I was frustrated about not being able to get rid of them. They popped up every time I used the address bar. Clearing my history would not get rid of them.
    This is where they are stored!! I found that by deleting the pesky web site from '''moz_hosts''', it does not appear in my address bar anymore!!!
    I think that if I just delete all the websites in moz_hosts....
    Wa-la...History Gone!!!
    As long as you don't delete the file, just empty it, FireFox won't know the difference. It will just keep adding websites to it until you empty it again.
    Why running "clear recent history" doesn't do this, I don't know. You are doing manually what "clear recent history" is not doing.
    Please tell me if you see any flaw in this.
    ''I think it's the solution we've all been looking for!''

  • Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. Could anyone give an amateur from Norway a hint of what may cause the problem? And I can not find the installation-disc for Office...Super! :)

    Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. They were all already installed when I bought the computer. Could anyone give an amateur from Norway a hint of what may cause the problem? (And I can not find the installation-disc for the Office Programs...Super!)

    Have you contacted Microsoft support - http://www.microsoft.com/mac/support ? 

  • Can not open the app store on my mac since new update

    can not open the app store on my mac since new update

    Here are some suggestions for getting the best results from this site.
    Create a user profile that accurately reflects the type of hardware you're using and your version of OS X, or include that information in your first message.
    Give details of the problem. A remark such as "X doesn't work" conveys no useful information. If X did work, you wouldn't be here. Instead, you should post something like this: "I did A; I expected B; but I got C." Include the complete, verbatim text of any error messages you saw, and specify where you saw them: in an application window, a CrashReporter window, a log, or whatever.
    Also describe the steps you’ve taken yourself, if any, to try to resolve the issue. If the problem is of recent origin, did you make any changes to your setup just before you first noticed it? Is the problem reproducible or intermittent? That is, does it always manifest itself when you take a certain action, or only at unpredictable times?
    Before posting, ask yourself whether it’s likely that you are the the only person ever to have had this problem. If not, search the discussions for answered questions similar to yours. If you found any pertinent information, but it didn't help, give details.

  • Help! Help! Help! Can not reinstal vista after replacing a new hard drive

    Can not reinstal vista after replacing a new hard drive (1TB WD 10EZEX) in HP Pavilion a6658f Desktop PC with recovery disc.
    I saw in the screen:
    "Windows setup could not configure windows to run on this computer's hardware"
    Product:
    HP Pavilion a6658f Desktop PC
    OS: pre-installed window vista with sp1 
    Product number:   FK575AA
    Bought in Canada
    Thank you.

    Thank you so much Lisa27,
    win vista installed to new WD 1tb hard drive. How?
    1. use  http://support.wd.com/product/download.asp?groupid=606&lang=en
    >Data Lifeguard for Windows  , write zero and to test the new hard drive,
    2. use Acronics true image 2013 to do partition on the new HD, and then to clone from the old HD to new HD.
    3. down load Intel Rapid Storage Tech to fix the Issues with Windows Vista* and Intel® RAID  (without it, Window mail can not be opened.
    Thank you very much for all your guys again and the support form WD support team.

  • My facebook app went dark and had the word "waiting" below it and I can not delete so I downloaded a new facebook app which is ok but the old app is still there but now the word "waiting" is gone and still cannot delete.

    My facebook app went dark and had the word "waiting" below it and I can not delete so I downloaded a new facebook app which is ok but the old app is still there but now the word "waiting" is gone and still cannot delete.

    This is my boilerplate respone for the "waiting apps" problem. Give these suggestions a try in order.
    1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
    2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
    4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
    6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • I can not turn my screen on my new phone 5s

    I can not turn my screen on my new phone 5s IOS 8.1.1, locking and unlocking the function in the control center and get no response, and i restore the iPhone to and nothing

    Try this If your iOS device restarts, displays the Apple logo, or powers off while you're using it and if it does not work - bring the phone to an Apple or authorized repair store

  • I can not install the software on a new XP Home Laptop Lenovo G580GH

    Nie mogę zainstalować oprogramowania XP Home na nowym Laptopie Lenovo IdeaPad G580GH B960.Jak to zrobić.
    Laptop nie ma oprogramowania.Pozdrawiam.
    Google translate:
    I can not install the software on a new XP Home Laptop Lenovo IdeaPad G580GH B960.Jak do it.
    Laptop not oprogramowania.Pozdrawiam.
    Moderator note:
    Hello wqpubkpi,
    please write in English because the language here is English.

    Hi wqpubkpi,
    Thanks for posting in the Lenovo Community,
    Could you please share with us more details about the issue that you’re facing and what is the software that you need to install on the system?
    Thanks and Best Regards,
    Soha
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Help can not update my CS5 on the new PC

    Help can not update my CS5 on the new PC

    I don't know whether you are running Windows or Mac OS, so I will link you to the  Product updates page.
    Look under Photoshop, choose your OS and look under CS5 for the 12.0.4 Multilingual Update (MUL).  You simply download and install.
    Adobe Camera Raw 6.7 is the latest and you download and install that.
    Under Product updates look for Bridge and apply all updates.
    CS5 is quite old and the updater doesn't work as it should so you have do the updates manually.

  • I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I

    I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I have tried all suggestions in this thread and nothing works. I also hooked up to laptop through iTunes with micro USB nothing!!!

    The new appletv software came out 2 or 3 days ago, how would Apple get it on the device in the box in a store?
    Why don't ou update the appletv software?

  • ? help - Can't install PSE 9 on my new MAC

    I can't install PSE 9 on my new MAC.  Accepted PW first time but not the second. 

    It is prompting for your adminstrator password.  Please work with your I.T. department or Apple if you need to have your administrator password reset.

  • I just installed Photoshop CS5 on a new Mac . On my older Mac I saw in Bridge on the above right sight of a miniature, a kind of aperture sign so that you know the RAW photo was treat. I can't see that sign on my new Mac. How do I get back that sign on my

    I just installed Photoshop CS5 on a new Mac . On my older Mac I saw in Bridge on the above right sight of a miniature, a kind of aperture sign so that you know the RAW photo was treat.
    I can't see that sign on my new Mac. How do I get back that sign on my new Mac?

    Apple provides repeat downloads as a convenience, not a substitute for your computers being the primary source of file transfers.  All your iTunes information such as playlists, ratings, etc. are in a file on your computer, not in the Apple Store.  Typically when you move computers you copy the whole iTunes folder and everything it contains to the new computer.  Moving media files can be done with a drive, or by Home Sharing.  You can also redownload media but let's say somebody desiced Apple may no longer sell a certain album; it cannot be downloaded again but if you already have it on a computer you can move your copy of the file.
    5 authorizations:  Some households have multiple computers.  If you want ot use one with an account it has to be authroized.  It means you can use any computer in the house to make purchaes, etc.
    Okay, my 5 minute typing limit for any one response is up.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • I have just purchased a Macbook pro, but my iphone is currently synched to my old pc. How can I now synch it with my new mac without losing all the apps/music etc on my phone, Ta

    Hi, I have just purchased a Macbook, but my iphone is currently synched to my old pc. How can I now synch it with my new mac without losing all the apps/music etc on my phone? Ta

    The easiest way is to copy the iTunes folder from your old PC to your MB (put it in the Music folder as a subfolder), along with the other valuable data on the old PC. Or restore it from a backup of your old PC. Then authorize iTunes on the MB to the same account you had on the PC. When you sync it will warn you that your content will be deleted, but it will be replaced with the same content from the MB. Before syncing you should also make sure there is at least one entry in iCal and Address book on the MB (assuming you sync to Outlook or equivalent on the PC) to assure that your contacts and calendar entries will move over correctly.
    Al alternative that is less effective is to connect the iPhone to the MB without syncing, and choose "Transfer Purchases" from the iTunes File menu. This willl copy purchases music, videos and apps, but not ripped tracks from the iPhone to the MB.

Maybe you are looking for