Can not do Surrogate bidding after Bid invitaion End date has been reached
We are on SRM 5 server 5.5
We are using surrogate bidding to capture bid responses and we manually receive vendors responses by the End date on the Bid invitation . We are unable to do surrogate bidding after the End date has been reached hence we then change the End date to a later date so that we can do surrogate bidding.
Is there a way that this can be done without changing the bid inviation end date ?
Regards
SAP standard you can not do Surrogare Bidding after the submission date
We are going to use Follow On documents
Similar Messages
-
Slideshow can not be export: An invalid file or volume name has been detected.
How can I find this file after following error?
slideshow can not be export
An invalid file or volume name has been detected.
I am not able to export my slideshow at all
Wie kann ich diese Datei finden nach der Error Meldung?
Diashow kann nicht exportiert werden
Ein unzulässiger Datei- oder Volumenname wurde entdeckt.
Ich kann die Diashow so überhaupt nicht exportieren!Wann tritt diese Fehlermeldung auf? Direkt nachdem der "Export" Knopf gedrückt wurde, oder erst nach einiger Zeit, wenn die fertige Diaschau gesichert werden soll?
Wohin soll die Diaschau geschrieben werden, wenn sie fertig ist? Auf den Schreibtisch oder auf eine externe Festplatte? Die Fehlermeldung könnte bedeuten, dass der gewählte Dateiname unzulässig ist oder der Ordner oder die festplatte unzulässige Namen haben.
Eventuell ist auch eined der Bilder in der Diaschau nicht lesbar.
Können Sie überhaupt irgeneine Diaschau exportieren? Versuchen Sie einmal eine neue, zweite Diaschau zu erzeugen, ganz kurz mit nur einoder zwei Bildern. Geht das?
-- Léonie -
Can not unlock photoshop starter edition 3.0 as it has been discontinued
Hi there,
I have had photoshop starter edition 3.0 on my computer and I have downloaded all my pictures to save them. However, my computer had crashed and I now, can not retreive them because photoshop starter edition is asking for an unlock code which I do not have. However, I can see the photos on the programme but can not access them. Please can you help??Same happened to me a few days ago. Uploaded all of my son's 3rd birthday photos. Then I was prompted to register. When I registered I was told to get the unlock code in the e-mail they sent. The e-mail only said "Sorry! Photoshop Starter is discontinued. Suggested I buy their software for $70.00. Will buying the software allow me to retrieve my photos? Is that my only option? I am awaiting an answer with you.
-
i am trying to retreive a voucher but it is saying it has been claimed. how can i dispute this i have not used it
Maybe here:
iTunes Store: Invalid, inactive, or illegible codes
Otherwise contact iTunes
Contact iTunes -
It has been over a year since i have been on itunes and i can not remember my answers to my security quetions please help
Ipad-Support wrote:
... then I am asked to answer my security questions, which I can't remember.
What should I do?
1) See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
2) Or Email Here > Apple Support iTunes Store Contact -
How can I know if a certain tick in a sequence has been reached during playback?
I'm using the sequencer to play a sequence and I need to jump to an other part of the sequence when a certain tick is reached. Imagine a loop that when we reach tick number "y" we jump back to tick number "x". But I'm not doing a loop so the built in looping methods won't work for me because sometimes I have to jump forward and that is not allowed .
At the moment I'm using a swing timer that fires a getTickPosition() every millisecond until I reach my desired tick but this is giving me slightly inconsistent results and I have a feeling it is using a lot of CPU for a fairly simple task.
I wish there was an event listener that would notify me when a certain tick is processed by the sequencer or even if I could be notified each time a new tick is processed so that I can do a check to see if it was the tick I was waiting for.
I wonder how the sequencer does it internally for knowing when the loop end is.
Any suggestions or workarounds would be greatly appreciated.Just to make it more clear, the SQL we were looking for is this:
Select
From
OJDT
Where
OJDT.TransId Not In ( Select VPM2.DocEntry From VPM2 Where VPM2.InvType = 30 )
And
OJDT.TransType = 30 -
Extend End date after the end date has reached
Hi gurus,
We are using SRM5.0 on ECS with backend ECC5.0.
We notice that after the end date of bid has reached even though there is a bid submitted by supplier , the purchaser still can extend the end date to a later date as long as he has not made the accept or reject choice.
If it is the case, the purchaser can view the price after the end date reached and then extend the end date and maybe tell other supplier what the price the opponent has submitted. This is not allowed and should be penaltied.
We just want to know how to avoid this in the term of system. Can we make the
end date field unchangeable after the end date has reached? or any other solutions?
Thank you in advance.
Message was edited by:
YE WangHi,
As Teja and SAndeep mentioned,you can go for either the Approval or BADI approach.
In case you are implementing the BADI,you can make the concerned fields grayed out so no changes are made but then this would mean that <b>no changes
</b> can be done at all after the END date has been reached.
In case of workflow,you can have you starting conditions in which you will compare the end date and the system date .If same,you can trigger a Workflow for approval of any changes to be done further.So even if the changes are made,the chnages are approved by a higher authority.
Another way would be to implement the "BBP_DOC_CHECK_BADI" to check whether the end date has been reached and then allow the user to do any changes.You can use the FM "BBP_PD_BID_GETDETAIL" to get the details of the BI and then check.In this case,you can additionally check for other parameters of the User like role,authorisation based on which he can make changes in exceptional cases.
BR,
Disha.
<b>Pls reward points for useful answers.</b> -
Not working imessage!! Credit card and I can not send imessage than after apple id. There are problems with Apple seeverele?? Thanks!
Before the service reset function. Wait 24 hours to activate imessage.go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once -
I can not sync my iPhone after restoring it - my computer only gives me the restore (again and again and again) option. I have no music and only a few aps now on my iPhone. Any tips before I go to the genius bar?
If you restored as new, without using a backup, and still only get an option to restore, there is a hardware problem or the phone was previously hacked (jailbroken, downgraded iOS, unauthorized unlock). Your only option is to take it to Apple or whoever provides iPhone service in your country.
-
When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed," and after clicking ok there is another box saying "The server responded with an error." How do I get rid of this. The calendar functions all right, but just have to close both of those boxes after doing any action in the calendar app.
Please take each of the following steps that you haven't already tried, until the problem is resolved. Back up all databefore making any changes.
Step 1
From the Calendar menu bar, select
Calendar ▹ Preferences ▹ Accounts
Choose the affected account from the list on the left and uncheck the box marked
Enable this account
Then check the box again. Test.
Step 2
Make a note of the account settings, then delete the account and add it back with the same settings.
Step 3
If you can't add the account, the settings may be invalid. Verify them. How you do that depends on what kind of account it is. If it's a Google calendar and you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it in place of your old password.
Step 4
Quit Calendar. Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
I can not open different sites after installing itunes. Why?
I can not open different sites after installing itunes. I can`t open google.com or youtube.com. Why?
Before anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner. -
I can not open my CS6, after that 30 day add for CC finally stopped. I'm not surprised though. How do I open CS6!
Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
Can not play any video after update to 4.4.2
Can not play any video after update to 4.4.2, it says always that i have to reconnect my HDMI Cable, reason HDCP error.
I have made some tests,
I can only view Trailers, every thing else dosn't work any more. I could not play any Video via Airplay. I tried to do it fom my IPhone 4, my IPad 1 and from my MacBook Pro 15"/i7 2 GHz/Mac OS10.7.2.
It always says the same error.
I reset the divice again and made a restore, but the same error.
I change the HDMI cable, same error.
It works fine before, I had 4.4.1 on it. I'm using a Toshiba Beamer MT700.
Need some help -
I can not run Adobe reader after installing it. A prompt said can only run an instance.
I can not run Adobe reader after I installed it. I said can only run an instance.
Hi,
Can you share the screenshot of the error message.
Please use the insert image button on the tool bar to insert the screenshot.
If you cannot share the screenshot, please provide the exact error message with us.
Thanks
~ Aditya Kalania -
HT4461 I can not download the APP after payment
I can not download the APP after payment
Hi there qsx,
You may want to try downloading the app again via Past Purchases.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
-Griff W.
Maybe you are looking for
-
Hello Technical Fokes, As per SAP Standard in FI-CO module we r using S_ALR_87012277 and also F.08. both the TCode give me the same result. But I want to know is there any diffarence in Program for the mention Tcode. Basically I want to is there any
-
I clic on my softwere update icon, after show new version for my N8, but i try to instal new version, its 30 MB new version to improov my N8, But its only show in my softwere update, how can i instal new vesion,
-
Help with a design, using Java Persistence
I'm having a design issue, and I hope that someone can help. I have a table called Item, and it essentially acts as a header table for a group of attributes for that item. TABLE Item .....id....................long .....itemName.........varchar .....
-
Trying to open local files(gif, html, swf etc) with Firefox only opens a blank window.
Currently on FF33.0.2 I used to open gif and swf files(also doesn't work on saved html files) on my local hard drive with Firefox just fine before by just manually double clicking the file and FF would automatically run it just fine. Now it only open
-
I have a KT4 Ultra with 2100 athlonxp a Few weeks ago During boot up the post got as far as memory check and ide hdd, floppy and disc drives cheaks and found them all but then stops befor the fasttrack raid. This does not allways happen but other tim