Can not drag files off iphone onto windows 7 Laptop (Error: A device attached to the system is not functioning!) Any ideas on how to resolve this, Much appreciated

Connect phone to laptop, AutoPlay Box appears, click open Device to view files, internal storage, DCIM, Drag all Pictures/Videos into folder on desktop. Message pops up within a few seconds, Saying 'A Device Attached To The System Is Not Functioning.'
Can any be of assistance?
Many Thanks.
Callum.

Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

Similar Messages

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

Developer Module only shows blue square with a white cross, images are displayed in the library ok but not im developer Module

Access share on NSS4000 with error: A device attached to the system is not functioning

Hello,
We use Acronis True Image Server to backup 4 Windows 2008 Standard Server system
with 2 different domains, each containing a DC and a RDP-Server.
After Server reboot, backup will run only once a day.
The next day backup aborts, and while trying to access
the network share like \\ip-address\share, as configured in Acronis
I get the error message: A device attached to the system is not functioning.
On the other hand, I can ping the NSS4000 and access share by using the
network (netbios) name instead of the ip.
This will work only for one day, also.
Now, if I try to access the share on the NSS4000 again by ip,
I get the error code 0x80070043 The networkname can not be found.
Ping on ip and netbiosname works.
Share access from one server to an other is not affected and full funtional at all times.
On the first sight I thought, that there it might be with the authentication protocol NTLMV2.
So I configured the GP to send only NTLM Authentication only, without fixing the problem.
Fyi:
I use a NSS4000, Firmware version 1.16-3
The NSS4000 is not a member in neither domains.
I created a dummy user account on each domain, an created a local user on the NSS4000 related
to the dummy user account on each domain.
A good answer helping me to fix with this issue, would be great.

I am constantly seeing this error at multiple sites on Windows Server 2012 and 2012 R2 Standard and DataCenter.
I have counted over 50 different server I manage with services such as domain controller, hyper-v, file servers, exchange 2013, SQL 2008/2012, and print servers.
I have seen it happen on machine that have been in production for over 2 years and to machines that were just created last week.
It is happening on metal, hyper-v and esx vmware servers.
It is happening when the machine have updates waiting or no updates, or after updates have been applied and awaiting a restart.
It is happening on Dell PowerEdge server, HP Proliant servers and IBM servers.
It is happening on servers with Intel and AMD chip-sets.
It is happening on machines that are a part of a domain or in a workgroup.
It is happening on machines with AV of Bitdefendor, Trend Micro, Vipre, Microsoft Endpoint, and Symantec Endpoint.
Only a restart will fix it.
I have ran process monitor on several of the problem machines and I cannot find anything.
Since I have only started seeing this about 6 month ago it must be a Windows update causing it.
Moses Hull of Alexant Systems

Server Manager fails to load with the error "A device attached to the system is not functioning"

I'm at a dead end on this. I can't find anything online that involves this error and the Server Manager and I cannot find anything in the event viewer being generated from this error.

I am constantly seeing this error at multiple sites on Windows Server 2012 and 2012 R2 Standard and DataCenter.
I have counted over 50 different server I manage with services such as domain controller, hyper-v, file servers, exchange 2013, SQL 2008/2012, and print servers.
I have seen it happen on machine that have been in production for over 2 years and to machines that were just created last week.
It is happening on metal, hyper-v and esx vmware servers.
It is happening when the machine have updates waiting or no updates, or after updates have been applied and awaiting a restart.
It is happening on Dell PowerEdge server, HP Proliant servers and IBM servers.
It is happening on servers with Intel and AMD chip-sets.
It is happening on machines that are a part of a domain or in a workgroup.
It is happening on machines with AV of Bitdefendor, Trend Micro, Vipre, Microsoft Endpoint, and Symantec Endpoint.
Only a restart will fix it.
I have ran process monitor on several of the problem machines and I cannot find anything.
Since I have only started seeing this about 6 month ago it must be a Windows update causing it.
Moses Hull of Alexant Systems

I got this message when saving photo from Iphone4s to my laptop's folder. "The device attached to the system is not functioning" What can I do?

I cannot save photo to my deskstop. When I copy to my folder, it indicated "The device attached to the system is not functioning". I don't update my IOS to the latest version in case my photo from my iphone will be missing. Please help. Thanks.

The Only thing I could do to save my pictures on my computer was to send them via Facebook chat to myself, send them one by one then on your computer open then and dragging them is way faster than right-click Save As. I just did that and I do not want to reset my phone so I guess I will continue doing this as I get more pictures or until I feel like resetting my phone. I believe this issue happens when you Connect and while transfering one or more file from one end to another, and you suddenly disconnect the iPhone or any apple divece, the file that wasnt completely transfered gets corrupted and I guess the whole /Picture/Video folder or perhaps the whole device gets corrupted as well. I am sure that this is a cause to this issue but I do not know if there are other causes or if the same one happened to you.
How to prevent this from happening again?
Always go to iTunes and click on "Eject" under your device tab before disconnecting your device from your computer. Even if you are not transfering any files at all.

I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

Connect to iTunes and try to reset it from there.

"A device attached to the system is not functioning"

Hi!
I'm hoping that all the smart people here can help with my problem. I help support/develop several custom windows application. One of these applications is written in Delphi and there is currently a problem with a feature a single computer owned by a client.The client's computer does have the latest version of adobe installed.
* The user is able to select a document from a data grid, and click a button to view that document (in this case a pdf).
* The document is saved from a database to the user's disk
* Using a shell command, the application asks windows to open that file.
Normally this works quite well, until recently. If this client tries to view a pdf file in this manor windows returns a system error, error 31, and the message "A device attached to the system is not functioning" is displayed. If I naviage to the location where the file was saved to an attemp to open it via double clicking, adobe reader opens the document right up. The application historically has had no problems with pdf's nor any other doucment type. If I change the file assoication from adobe to note pad, the application does open the file with note pad, but it is not readable. If I change it back to adobe reader, the problem persists. I've tried uninstalling adobe, reinstalling, and using a previous version of adobe. Any suggestions would be appreciated.
FYI, before someone tell's me I should be talking to microsoft, I am also inquiring on the windows side of this through msdn. Since I am not 100% sure if this is a windows or adobe reader issue I would appreciate suggestions on both sides.
Last but not least, incase it is of any help, this is the delphi command used to ask windows to open the file:
ShellExecute(GetDesktopWindow, 'open', PChar(TempFile), '', '', SW_SHOWNORMAL);
Any and all help is appreciated.
Thanks!
Louis

Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

Java.util.zip.ZipException: a device attached to the system is not function

getting a java.util.zip.zipexception : a device attached to the system is not functioning error - what could cause such an error?
My program finds all zip files in an archive and then searches through them for xls files, which it extracts and re-locates.
I havent even a clue where to look for the cause of this exception but Ill attach at the bottom the code in the general vicitiny of the trigger so that you can get kind of an idea what Im trying to do, and if im lucky, even spot my problem. :) Thanks!!
//zips is an array of zip files
int found = 0;
File[] haveXLs = new File[zips.length];
for (int i = 0; i < zips.length; i++){
String fileName = new String("L:/Vision/Archive/" + zips.getName());
ZipFile archive = new ZipFile(fileName);
String name = zips[i].getName().substring(0,8);
for(Enumeration e = archive.entries(); e.hasMoreElements();){
ZipEntry entry = (ZipEntry) e.nextElement();
if(entry.getName().substring(0,8) == name){
haveXLs[found] = zips[i];
found++;

Hey there a few things.
Make sure that you dont use fileseparators like you do. ("/")
Use the separator generated for your system.
Something like:
String sep = System.getProperty("file.separator");
You mentioned it work local, but not network.
Either you have plenty of harddrives or L: is a mapped drive.
Is it working at the mapped drive?
When you say on the network, how are you accessing the files?
Could it be possible for another user to lock a file, so you wont have access to it over the network?
BR.
MagDy

When accessing shared folder - 'You might not have permission to use this network resource" .. A device attached to the system is not functioning

On a Windows 2008 R2 server that had been working fine, all of a sudden some shared folders became inaccessible. Clicking on them returned the following: "<Folder> is not accessible. You might not have permission to use this network
resource. A device attached to the system is not functioning."
If I create another share with a different name for that same folder, it works fine. If I delete the original share then recreate it with the same name, I get the same error. However, if I right click on the problematic share and select 'map
network drive' that works. So this would not appear to be a permission issue.
I discovered this problem because the path for mapping the home folder as a property of their AD account stopped working.
I have tried most of the common things found on the internet. I've tried accessing via IP, same issue. While I only have a couple 2003 servers, those can access this resource.
At this point, I'm pretty much out of ideas. Any help would be appreciated. I also have some reports of potential issues with some printer mappings too which I will have to investigate in the morning.
If anyone has a solution to this I would be extremely grateful. Thank you.

Hi,
Can you access the shard folder locally? Is a specific server cannot access the shared folder? Please try to Boot your server in Clean Mode to check if some third-party software cause the issue.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Communication problems: A device attached to the system is not functioning.

Hi all,
I'm developing an applet and using the OMNIKEY 5321 CL reader for communication and testing. One of the requirements for our card is to read large binary data.
For this purpose i used extented lenght APDU to read the data from card.
When I tested it via JCOP simulation I was able to read up to 32767 bytes as described in specification. But problem occurs when I test it with reader, in this case I'm able to read max 298B in APDU response. When I send greater byte count than 298B i have got following error in JCShell plugin:
jcshell: requestSessionKey.jcsh[1]: Error code: -6 (Card terminal error)
jcshell: requestSessionKey.jcsh[1]: Communication problems: A device attached to the system is not functioning.
Regarding the extend lengh APDU support it should by OK from the OMNIKEY. I'm using newest driver 1.2.9.2 for Win 7.
Here my configuration:
JCOP:JCOP 2.4.2r1
JAVA CARD: jc301
Global Platform: gp22
Can somebody help me? Any ideas?

If you want to use PC/SC directly, I have a simple Go program that reads an APDU file (just hex encoded APDU strings) and sends them to a smart card. You can give that a try if you like.
The code is at: https://bitbucket.org/safarmer/go-apdus
There is a Goclipse project as well as the source. You will need to install Go and run "go get github.com/ebfe/go.pcsclite/scard" to install the required PC/SC wrapper. Once you have done this you can run the program with -file <apth to text file>
An example text file:
# A comment that is ignored
00a4040000
80ca9f7f00- Shane

System.Diagnostics.EventLog - A device attached to the system is not functioning

I was getting an error ....
System.ComponentModel.Win32Exception was caught
ErrorCode=-2147467259
HResult=-2147467259
Message=A device attached to the system is not functioning
NativeErrorCode=31
Source=System
StackTrace:
at System.Diagnostics.EventLogInternal.InternalWriteEvent(UInt32 eventID, UInt16 category, EventLogEntryType type, String[] strings, Byte[] rawData, String currentMachineName)
at System.Diagnostics.EventLogInternal.WriteEntry(String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte[] rawData)
at System.Diagnostics.EventLog.WriteEntry(String message, EventLogEntryType type)
at VB_Braums_ClassLib.LogIt.WriteEventLog(String Entry, EventLogEntryType eventType, String Source) in \\Corp01\Vol1\Mis\Pccode\Ms.net\ProductionLibs\ProductionLibs\ProdLibCommon.vb:line 3666
InnerException:
This code is in a library, so I create a "hello world" to demonstrate the issue. I will post it at the end. This .net 4 framework and it's been around for a while in our code. We are starting to upgrade from XP to Win 7. Basically event log sizes
are limited to the 32667 number. So we had a test, if the string is bigger than that, then we would write it in 32000 byte chucks. On two different win7 boxes we get the "device attached" error message. Run the same code on a XP box and it works.
Oh, and the Win 7 boxes are 64 bit. I wonder if the win 7 32 bit would have the same issue? Can others duplicate it? The tmpsize seems to be different numbers, but if you play with it, you can get it down to number x works and (x+1) does not.
Here the code .....
Module Module1
    Sub Main()
        Dim logName As String = "BraumsLog"
        Dim objEventLog As New System.Diagnostics.EventLog()
        Dim needCreate As Boolean = False
        Dim Source As String = ""
        If Source.Length = 0 Then Source = "Test"
        Dim Entry As String = "".PadLeft(64000, "1"c)
        'Register the App as an Event Source
        If EventLog.SourceExists(Source) Then
            Dim slog As String = EventLog.LogNameFromSourceName(Source, ".")
            If slog <> logName Then EventLog.DeleteEventSource(Source) : needCreate = True
        Else
            needCreate = True
        End If
        If needCreate Then EventLog.CreateEventSource(Source, logName)
        objEventLog.Source = Source
        '*********** New Code ****************
        objEventLog.MaximumKilobytes = 20480
        objEventLog.ModifyOverflowPolicy(OverflowAction.OverwriteAsNeeded, 0)
        'WriteEntry is overloaded; this is one
        'of 10 ways to call it
        Dim tmp As String = ""
        Dim tmpSize As Integer = 32000 '31890 works 31891 does not
        Do While Entry.Length > tmpSize
            tmp = Entry.Substring(0, tmpSize - 1)
            objEventLog.WriteEntry(tmp, EventLogEntryType.Information)
            Debug.WriteLine(tmp.Length.ToString)
            Entry = Entry.Substring(tmpSize)
        Loop
        tmp = Entry
        objEventLog.WriteEntry(tmp, EventLogEntryType.Information)
    End Sub
End Module

Run the same code on an XP 64 bit box and it works? XP comes in multiple flavors.
Perhaps you should compile to x86 CPU and see if it works on Win 7 64 bit. Win 7 comes in 32 and 64 bit also.
On the other hand Win 7 service pack 1 mainstream support ended on the 13th of this month. Extended support ends in 2020 supposedly. Perhaps you should upgrade to Win 8.1 instead. Win 10 is coming soon enough.
Windows lifecycle fact sheet
Microsoft Product Lifecycle Search - Windows 7 result
La vida loca

Error message saying a device attached to the system is not functioning

i m getting an error message saying a device attached to the system is not functioning whenever i m trying to connect my pc to my smartphone. i tried all your options like uninstalling failed updates from my update history, checking if their is any flag
in device manager option but nothing helped me.. plz solve my problem..

Hi,
Could you please have a share with your phone's information?
Based on what I know, different phones may have different softwares developed by the manufacturer to make the connection through Windows operating system, we may check with the phone's manufacturer side and see if there could be some helpful information
offered.
Besides, please take a check with
Event Viewer and see if any special errors logged there.
Best regards
Michael Shao
TechNet Community Support

E65 modem: "A device attached to the system is not...

I am not able to resolve the following problem which suddenly appeared. When I try to connect to the Internet, both bluetooth and USB modem say: "Error 31 A device attached to the system is not functioning" when connecting directly using a dial-up connection. When using Nokia PC suite it says: "Cannot create newtork conncetion" (maybe inaccurate translation from my language). However, connecting to Internet directly from the phone (browser, applications) is working, so the connection itself is well configured. Moreover, I am not able to install the INF driver for bluetooth modem which I downloaded ("Device cannot start (CODE 10)"), but USB at least connection would be fine. Any ideas?
Solved!
Go to Solution.

It was a permanent error of Windows Vista DUN (Remote connections). Reinstalling Vista definitely helped. At least for a while...

Direct Show causing "A device attached to the system is not functioning"

Hello,
I've been using direct show for about a year to connect to four webcams. I have an intermittent problem where by one of the cameras (at random) will not display the live feed. This could not happen for several weeks possibly months and then suddenly the
camera dies.
I run the following bit of code and receive error code -2147024865.
IMediaControl mediaCtrl = (FilterGraph)m_filterGraph as IMediaControl;
hr = mediaCtrl.Run();
DsError.ThrowExceptionForHR(hr);
In Hex this equates to 8007001F. From doing a bit of googling I found that this means a "A device attached to the system is not functioning".
No other application uses these webcams and nothing has changed to them physically. Direct Show, seems to make this camera unusable at random times.
Has anybody else experienced this problem and over came it?
Thank you in advance,
Mike

Hi Roman,
Thank you for your reply. I'm using a Logitech webcam and this camera is used by the Logitech controller software. This allows us to control the zoom, pan, focus and camera settings whilst connected to the camera in C# application. When this problem occurs,
the webcam device still shows up in device manager and the settings of the webcam state that the device is working properly.
I thought it may of been introduced by a possible memory leak that causes the camera to not respond, or that when the application closes it would leave the camera in a unusable state.
I've contacted Logitech to ask about drivers for the webcam and they state that it uses windows plug and play drivers. These are currently up to date.
The reason I thought that it may of been introduced by direct show is because these cameras have been used before on other products but using different software, Steribar (a software tool to use the view of a webcam as a cheap barcode reader), and haven't
experienced this problem with the cameras with this software. However very intermittently the custom C# app that I have created causes this problem.
Thank you for you time.
Mike

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

Can not drag files off iphone onto windows 7 Laptop (Error: A device attached to the system is not functioning!) Any ideas on how to resolve this, Much appreciated

Similar Messages

Maybe you are looking for