Can not edit the sales order draft

Hi All,
we are using SAP 2005 B PL 44. we are not able to edit the sales order in the approval stage once it is approved or even not approved. for e.g. if the user sends a sales order to the higher level for approval but the higher level wants some modifications in the sales order to be done by the user and so approval request is rejected by the approver. now when the user opens the draft to change it, no row at sales order detail is editable. please let us know if there is some problem with the Patch.
thanks,
Binita

hi binita,
Check this wiki page -march-2009.
Why a draft document in an approval process cannot be modified by the originator?
https://www.sdn.sap.com/irj/scn/wiki?path=/label/b1/eop_march09
Jeyakanthan

Similar Messages

Editing a sales order draft by approver

I have seen a few threads on this topic, but the responses all said read this https://www.sdn.sap.com/irj/scn/wiki?path=/label/b1/eop_march09. I did read through it, but it didn't answer my questions.
I created approval process. Sales orders created by user A, must be approved by both users B and C.
I then as user A created a sales order and added it.
I logged into SAP as user B, received the approval alert and accessed the sales order draft.
The problem is that I was NOT able to modify the sales order. I could not change the price, quantity or add a new line item. From what I have read on the forums the approver should be able to modify the draft document. What am I doing wrong?
Second question...Is it possible to specify 2 approvers, but have the draft document go to approved status if either of the approval users approve the draft? It doesn't seem that SAP will allow for this, but I thought I would ask.

Answer for the 1st question: NO. All documents going through approval procedure will not be able to edit in anyway.
Answer for the 2nd question: You may assign two approvers in the approval stage only. Then set No. of Approvals Required to 1.
Thanks,
Gordon

Rounding : User flexibility to edit the Sales Order quantity.

Hello Gurus,
We are on 6.0 and have the following requirements.
1st requirement: To round the Sales Order Quantity to the Alt Unit of Measure (higher or lower). As a solution we could use the Rounding Profile.
The problem is with 2nd requirement below.
2nd business requirement: When the system rounds the Sales Order quantity to higher or lower, the user should have the flexibility to edit the Sales Order quantity and decide whether to permit rounding or not, as suggested by the system.
Currently, with standard config, the system gives the message V1720 saying it has rounded the quantity with a reason. After the rounded quantity is suggested by the system, even if the user edits the Sales Order quantity, the system puts it back to the previously rounded quantity.
SYSTEM REQUIREMENT : We would like to have the Rounding but we want the user to be able to edit the rounded quantity.
REASON : Since the products are high value, we want the customer to feel comfortable with the rounded quantity.
The users do not want to impose the rounded quantity compulsorily on the customer. If the customer is not comfortable with the rounded quantity, the customer should be givne the choice of a non-rounded quantity.
IMPACT : In these difficult times, every Order is important. If we don't not give this choice to the customer, the customer might decide not to order at all. We do not want to lose the Order just because of the higher rounded quantity. But, at the same time, we would like to give the choice to the customer of the rounded quantity and his non-rounded quantity.
PLEASE NOTE : In this situation, the Rounded quantity is slightly different from Minimum Order quantity. The Minimum Order quantity is not the solution.
QUESTION : Is there any standard setting or is User Exit, BADI the only method ?
Thanks in advance
Srinivas

Hi Prakash,
Thanks for the reply. Actually these customers are created as a Agents and we are using these customers in Commission rebates. So at the time of Rebate partial credit memo, then these agents should be active otherwise system will give the error.
So what i am thinking is, Standard sales order creation needs to be restricted so that users can not able to create standard order.
So can you suggest is there any user exit can be used to prevent creation of standard order for these account group and order type xxx?
Regards,
SK

Can we delete the sales order?

hi,
can we delete the sales order?

Use transaction code SARA for deletion of sales order but as every body said it is not recommended as it might affect the documents made against it and also the master data.
So its better to reject the sales order.
Regards
Prashant

Can we block the sales order after creating ?

Can we block the sales order after creating ?
If how to do.
Thanks
naresh

Hi
Naresh
If you want to block the sales order then go to
>Header -- shipping tab
There u will find the column of delivery block there u put any reason. This way u block the sales order.
Another way u can give reason for rejectioon this way also u block the order and as and when u want to desp u can remove the reason/block.
Hope this will help you.
Thx.

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

We need to find out what you actually have here. There is no Adobe Reader Pro. There is Adobe Reader and Adobe Acrobat Pro.
With Acrobat Pro, you may be able to do some editing after running OCR. With Adobe Reader, you cannot edit.
Which one do you have?

I can not edit the form that I am filling in

I can not edit the form that I am filling out. I saved it to Desktop and was allowed to fill it in. But I can not erase some words that I want to change.

Are the words you want to change in form fields that you previously typed in?

Conditions are not editable in sales order

Dear Friends,
Could you tell the reason - Conditions are neither editable nor you can insert a conditin in sales order line item as the insert icon is inactive.
Thanks & regards
Pinky

Please find my underlined reply
Could be either of the 3
1. Item category would not be allowed for pricing - it is ok
2. Check if the item is rejected or - not rejected
3. Check if invoice is created - invoice not created, this is the time if i am going to create/change the sales order
Hi,
The only reason for this is because this order has subsequent documents. - No subsequent documents
Goto VA03.
Nothing allowed
Complete pricing lines are gray. I have so many manyal conditions
Thanks for the response

PR00 should be not editable in sales order

D/ Friends,
Weu2019re creating Sales Order w.r.t. contract. Weu2019re putting PR00 in contract. PR00 is manual, has no access sequence. Same pricing procedure has been assigned to contract and order. In that Pric Procd PR00 is manual and mandatory. In VTAA Copy Ctrl between Contract and Sales Order Pricing type is D @ Itm level.
Now the issue is that PR00 in sales order is being copied from Contract, but in Sales Order it is editable. We want that PR00 should be non-editable in Sales Order. How to achieve this?
Thanks.

Hello R S,
As you are using same Pricing Procedure in Order & Contract & PR00 is manual in Conract, you cannot make it non-editalbe in Sales Order using Standard Config.
You will have to go to Z-Development as suggested by Prasanna above.
SHD0 will also not be useful because you would like to have other Conditions in editable mode.
Hope this clarifies,
Thanks,
JIgnesh Mehta

Creating delivery, can I check the sales order's field using user-exit or ?

Hi dear.
When I create a delivery in VL01N or other transactions, I want automatically to check the sales order's some field and to decide whether create or not.
Can I use user-exit for that?
Or other solutions is there?
Thanks regards

Yes your requirement can be achieved thru a User Exit.
There are many User Exits available in Delivery as listed in the link below:
https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
The selection of necessary User Exit is based on your specific requirement.
Also if you want to check some feild of Sales Order whether it is completed or not, then you can also use Incompletion Procedure in Sales Order, which will make sure that no Sales Order is saved until the end-user enter data in those feilds.
Hope this helps...
Thanks,
Jignesh Mehta

An user can't edit a sales order

Error, " Exception Form_139_ILoadl _39 Raised Item - form item is not edible"
She is trying to add a row to a sales order that is partially shipped and getting this error. This error is an information only error , but when she selects OK, her system freezes.
I am testing authorizaitons due to the fact her manager could edit the form. Could this be an additional authorization?
Please help,
Thanks,
Debbie

Hi Gordon,
I answered my own question. When a form is not edible, SAP is looking for a field that it can't write to. So make
sure all add-ons are running and UDFs are open and active.
Thanks anyway,
Debbie

PO from sales contract can not copy to sales order

Hi all,
I would like to ask about copy control in sd.
I set up copy control in sd and it is working, but the problem PO number can not be copied from contract to sales order.
maybe some one can help me.
Thanks
wins

Hi,
Check the copy controls.
Mohan

Issue in V_V2: Can system rescheduling the sales order with out stock

Hello All,
I created sales orders with one material. For that material the stock is zero now. The system has not confirmed the qty in sales orders while creating.
After that as per the client we ran the V_V2 for rescheduling, but system has not rescheduled any schedu lines in any sales orders.
Is it due to lack of stock?
One more point is we do not have Delivery proposal option in sales order. Only One time delivery option.
Is it due to this setting?
Please help me to solve this issue.
Regards
Lakshmikanth

Hi
Because there is checking rule set at order level , thats why once stocks is not there due to unavailabilty of stocks system not allow to go for V_V2.
for this u hav to deactivate under oVZ8/9
thanks
mk

Can not edit the index.html site

I designed a Site www.alter-porthhof.de and maked it ready
for editing with contribute. Everything works fine, but I seems
that I maked one mistake: I edited the index.html on my computer
for testing, and than I gave the user domainowner the admin rights.
He can edit everything and it works fine except the index.hmtl
site.
How can I change this? Is it possible to delete the hole
contribute thing, and than to from the beginning?

1. when you use dreamweaver to build and maintain the
website, check in the index.html file, so the lock-file
(index.html.lck) will be removed
2. wehen you use Contribute too, check if you have a draft
open of the index.html file, publish the draft or discard the draft
3. check with an ftp program on the server for index.html.lck
and delete this file, this will remove the lock on the page

In which tables can I find the sales order item texts?

Experts,
In SD, we have texts on sales order item level. These texts can be filled manually or automatically via access sequences. My question is very simple: in which table can I find these texts? I want to extract them for a big number of sales orders.
Reward points if helpful answer.
Thanks

hi
try in
TVAPT     Sales document item categories: Texts
TVAKT     Sales Document Types: Texts
TVAUT     Sales Documents: Order Reasons: Texts
TVAST     Sales Document Blocking Reasons: Texts

Can not edit the sales order draft

Similar Messages

Maybe you are looking for