Can not establish L2TP connection to Mac Server via VPN

Hi,
I am asking for some help on this VPN Problem:
since yesterday I have a new Mac mini Server running OS X 10.9.3 and Server Software 3.1.2 - my goal is to reach some deivces in my home network from outside, mainly with the iPhone or iPad.
Dyn.org
I registered with Dyn.com a hostname using my outside IP Address. Server Type: Host with IP Address and used the IP Address presented to me in the stup wizard. This one is shown as active and when I ping or Lookup the Host Name it is responding - so I think I am fine here.
Mac Mini Server
Next I have setup a user on the server who can use VPN. Next I have setup the VPN service with L2TP, using the Host name von dyn.org, a nice shared secret, IP range 10.0.1.190 to 10.0.1.199, DNS 10.0.1.1, no routs.
I exported this as config file to my iPhone.
The VPN Protocol in the Server says, it is listening for connections.
When I turn on VPN on the iPhone it replies always L2TP-VPN-Server has not answered.
AirPort Extreme
The AirPort Extreme is configured by the Server with Ports 500, 1701, 4500 and the Mac Server 10.0.1.26 as Privat IP Address.
The Internet Tab shows Router and DNS as 192.168.211.1 and IPv4 Address as 192.168.211.109
I actually do not understand why I have a 192.168.xxx.xxx DNS and router entry while I have the Privat Network on 10.0.1.xxx
The Protocol for VPN just says nothing at all, besides that it is listening. I guess something is blocking the connection to the server.
By looking at my above configutation - what am I doing wrong? Why do I get this L2TP-VPN-Server error message? I changed the password for the user to be sure I am not miss spelling it. Did not help.
Any idea?
Thank you for your support!
Regards
Klaus-Martin

According to your IP addresses you listed, you might have two devices that are trying to create a NATed network (one in the 10.0.0.0/8 and 192.168.0.0/16 networks). Can you list what devices you have between your server and the Internet?
I'm going to take a guess that you have a router/modem prodived by your ISP, and this is going to give you a 192.168.211.0/24 network (since it set up as a router to provide its own network). You then plugged an Airport into this router and configured it to set up its own wireless network on its own subnet (10.0.1.0/24). The server is on this network, sees the Airport (and lets you configure it). So while your hostname points to your external address (which is good), it's just that external address is the WAN side of the modem/router and not the Airport. I think your network is set up like this: Internet  --> ISP modem  -->  Airport --> Server. If this is the case, you need to set up the ISP modem/router to port forward L2TP ports to your Airport (which in turn, port forward to your server). Or you could set your ISP modem/router into bridge mode and have the Airport dial the connection to the ISP (more complicated).
Have you tried VPN from the local network, say put the phone on wifi and make sure that works? This would be a quick test to make sure the phone and server are set up properly.
Also, have you tried port scanning your host from a computer outside your network, like from an iPhone on celluar? That would help you determine if you have routing configured properly for the L2TP VPN ports.

Similar Messages

  • Im trying to set up a connection to localhost from my mac but keep getting an error message: Firefox can't establish a connection to the server at localhost.

    Hi
    I'm new to working with Mamp, Dreamweaver and WordPress and am trying to work using the Firefox browser. unfortunately i keep getting the error message Firefox can't establish a connection to the server at localhost. when i type the URL http://localhost/explore_ca/blog/wp-admin I cant use Dreamweaver with WP without this is there a reason for this and how do i get around it?

    1- Is your MAMP working '''whithout errors'''(does it show you errors while executing or running and enabling)?
    2- Have you tested other browsers? Is your problem still occuring?
    3- Are you using '''proxy '''or '''VPN '''(or setted a proxy server or VPN server on your Computer)?

  • Whenever I go to webpages there are a few that come up with: "Unable to connect Firefox can't establish a connection to the server.."? What do I do?

    Whenever I go to some websites there are a few that come up with: "Unable to connect Firefox can't establish a connection to the server.." and the problem occurs with the same websites on other browsers. What might be the problem?

    If you get the same problems with two browsers, the problem is
    outside of them. Check you computer for blocking programs.
    Separate Issue;
    Your System Details shows;
    Installed Plug-ins
    Shockwave Flash 15.0 r0
    Shockwave Flash 16.0 r0
    Having more than one version of a program may cause issues.
    Grab the uninstaller from here:
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
    Then reinstall the latest version.
    Flash Player '''v16.0.0.257 https://www.adobe.com/products/flashplayer/distribution3.html'''
    http://www.ehow.com/how_11385212_troubleshoot-reset-connection-firefox.html
    https://support.mozilla.org/en-US/kb/server-not-found-connection-problem

  • Windows performed an automatic update. I am now unable to use Firefox. I receive an error message "Firefox can't establish a connection to the server". Windows IE works, Outlook works. What did Microsoft do to me this time?!!!

    Windows performed an automatic update on my PC this morning. Now, Firefox does not work other than in SAFE mode. I get "Firefox can't establish a connection to the server..." I downloaded and reinstalled the latest version of Firefox and get the same error message. IE works. MS Outlook works. What did Windows do to me this time?

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Unable to connect Firefox can't establish a connection to the server at 'URL of the site' why does this appear in all browser??

    I have used these sites
    -www.facebook.com
    -www.dubbedonline.tv/ and some others for a long time but few weeks ago i couldn't access them anymore and this appeared :
    Unable to connect
    Firefox can't establish a connection to the server at www.facebook.com.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    i have also tried many ways to access them but none of the solution worked, one of them was checking troubleshooting problems and it detected that the remote device won't accept the connection, so, how can i fix this?

    You can check the connection settings.
    *Tools > Options > Advanced > Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Firefox can't establish a connection to the server at "Every Website" but IE and Safari work just fine.

    Unable to connect
    Firefox can't establish a connection to the server at google.com.
    The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    If you are unable to load any pages, check your computer's network
    connection.
    If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • I cannot open my Yahoo Mail but everything else is OK.  When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page.  Safari can not establish secure connection with Yahoo Mail.

    I cannot open my Yahoo Mail but everything else is OK.  When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page.  Safari can not establish secure connection with Yahoo Mail.

    It sounds as though a script on the site, or an advertisement, is not working quite right...
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies using either of these. Save any pending work first.
    While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • XE error - "can't establish a connection to the server at 127.0.0.1:8080"

    I installed XE on my laptop, os windows xp prof. v2002 sp2.
    Database works fine, I can access with sql command line.
    But can not access to database home page and apex.
    Tried both links with both IE and Firefox;
    http://localhost:8080/apex
    http://127.0.0.1:8080/apex
    Same error I get; "can't establish a connection to the server at 127.0.0.1:8080."
    SQL*Plus: Release 10.2.0.1.0 - Production on Cmt Kas 17 22:44:04 2007
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    SQL> conn / as sysdba
    Connected.
    SQL> SET SERVEROUTPUT ON;
    SQL> select dbms_xdb.gethttpport, dbms_xdb.getftpport from dual;
    GETHTTPPORT GETFTPPORT
           8080          0
    SQL> DECLARE
      2      l_dad_names DBMS_EPG.varchar2_table;
      3  BEGIN
      4      DBMS_OUTPUT.put_line('DADs');
      5      DBMS_OUTPUT.put_line('==========');
      6
      7      DBMS_EPG.GET_DAD_LIST (l_dad_names);
      8
      9      FOR i IN 1 .. l_dad_names.count LOOP
    10        DBMS_OUTPUT.put_line(l_dad_names(i));
    11      END LOOP;
    12   END;
    13  /
    DADs
    ==========
    APEX
    PL/SQL procedure successfully completed.Any comments will be great, thank you.

    Really thank you all for your support, but this time when I changed to hostname I experience TNS-12547 error as following;
    D:\>lsnrctl start
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-KAS-2007 08:58:29
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    System parameter file is D:\oraclexe\app\oracle\product\10.2.0\server\network\ad
    min\listener.ora
    Log messages written to D:\oraclexe\app\oracle\product\10.2.0\server\network\log
    \listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=TC03540225.turkcell.entp.tgc)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    Start Date 18-KAS-2007 08:58:30
    Uptime 0 days 0 hr. 0 min. 1 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File D:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
    Listener Log File D:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=TC03540225.turkcell.entp.tgc)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    D:\>sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.1.0 - Production on Paz Kas 18 08:59:32 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup force
    ORACLE instance started.
    Total System Global Area 599785472 bytes
    Fixed Size 1288820 bytes
    Variable Size 163579276 bytes
    Database Buffers 432013312 bytes
    Redo Buffers 2904064 bytes
    Database mounted.
    Database opened.
    SQL> alter system register ;
    System altered.
    SQL> conn hr/hr@xe
    ERROR:
    ORA-12547: TNS:lost contact
    Warning: You are no longer connected to ORACLE.
    SQL> exit
    D:\>tnsping xe
    TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-KAS-2
    007 09:00:24
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    D:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = TC03540225.turkcell.entp.tgc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
    TNS-12547: TNS:lost contact
    D:\>ping TC03540225.turkcell.entp.tgc
    Pinging TC03540225.turkcell.entp.tgc [169.254.121.46] with 32 bytes of data:
    Reply from 169.254.121.46: bytes=32 time<1ms TTL=128
    Reply from 169.254.121.46: bytes=32 time<1ms TTL=128
    Reply from 169.254.121.46: bytes=32 time<1ms TTL=128
    Reply from 169.254.121.46: bytes=32 time<1ms TTL=128
    Ping statistics for 169.254.121.46:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    D:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\log\listener.log ->
    Started with pid=5796
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=TC03540225.turkcell.entp.tgc)(PORT=1521)))
    Listener completed notification to CRS on start
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    18-KAS-2007 08:58:31 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=TCHASYILMAZ))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
    18-KAS-2007 08:59:41 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    18-KAS-2007 08:59:41 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    18-KAS-2007 09:00:12 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    18-KAS-2007 09:00:18 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    18-KAS-2007 09:00:24 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    18-KAS-2007 09:01:12 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    18-KAS-2007 09:02:15 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client

  • Firefox can't establish a connection to the server at 127.0.0.1:8080.

    Hi everyone!
    I need your help. Im just a newbie in Oracle 11g. I'd just installed it last night and i found this problem:Firefox can't establish a connection to the server at 127.0.0.1:8080.
    Can I ask what cause me to have that problem? Im using Windows XP, Service PAck 2.
    Thank you for your replies and help. I'd badly need to this Oracle database to run..
    Stay blessed. ^^

    Hi Udo!
    I've tried the lsnrctl status,(I'd just type what I think is important.. too lazy to type them all, hehehehe)
    ALIAS:Listener
    VERSION:TNSLSNR for 32 bit Windows, Version 11.2.0.2.0 Production
    Trace Level:off
    Security:ON, LOcal OS Authentication
    SNMP:Off
    Default Service:XE
    Service "CLRExtProc" has 1 instance(s)
    Instance "CLRExtProc", status unknown, has 1 handler(s) for this service
    Service "PLSExtProc" has 1 instance(s)
    Instance "PLSExtProc", status unknown, has 1 handler(s) for this service
    when i tried the "sqlplus / as sysdba", it says:
    ERROR:
    ORA-01034:Oracle not available
    ORA-27101:shared memory realm does not exist
    Process ID:0
    Session ID:0
    Serial Number:0
    Thank you.. ^^

  • Firefox can't establish a connection to the server at localhost

    I was building a wordpress website on my PC: using Firefox browser, accessing wordpress through WebMatrix which opened Firefox & showed a 'localhost:20238' address. It worked for 5 days then WebMatrix said ' website does not exist. I could still load it for 1 day using browser history. Then that failed too. Have ditched WebMatrix. Now loaded XAMPP & Wordpress (shown as succesful). Putting 'localhost' into address box. Error message: Firefox can't establish a connection to the server at localhost.

    Does it work in other browsers?
    When you enter http://localhost/ Firefox will try port 80, since that is the standard for web servers. If there is any other software on your computer listening on port 80, the web server might not be able to use it. Can you check your XAMPP settings and try using a different port such as 8080? Then you would access the server using http://localhost:8080/.

  • Have an error saying 'Firefox can't establish a connection to the server at localhost:50972. '

    I bought a product called 'Helium Music Streamer' and downloaded it. I registered the product and went to launch it..
    only it wouldnt launch.
    It had the error 'Firefox can't establish a connection to the server at localhost:50972.'
    I would be glad for some help
    '

    Hi, in case you haven't solved your problem - here's what i've discovered based on having same issue. where IE proxy system settings automatically allows local host url access; It appears FF system proxy or auto-detect does not, it's settings blocks local host URL access. To access local host, "no proxy" settings should allow or, only way to allow this exception (or any other exceptions) is through their manual settings. You should see in manual settings that the local host is already set to be allowed through.
    FF also has plug-ins available which allows you to configure multiple proxy settings/profiles that you can toggle between based on your connection needs. THis way, when you want to use local host you can select it's proxy profile and go back to default proxy settings for regular web surfing, etc
    Hope this helps you.

  • Firefox can't establish a connection to the server

    Unable to connect: Firefox can't establish a connection to the server at cms3.tucsonaz.gov. * The site could be temporarily unavailable or too busy. Try again in a few moments.
    * If you are unable to load any pages, check your computer's network connection. * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
    See also: http://kb.mozillazine.org/Error_loading_websites

  • Using oracle (services in manual) following message appears Firefox can't establish a connection to the server at localhost:1158.

    when I use oracle 11 and have it set in automatic (in services) it operates properly. (after restart) When I have it in manual (in services) i get the message 'Firefox can't establish a connection to the server at localhost:1158.'
    We use the computer for various instructors but only one uses Oracle. With oracle in auto it takes for ever to log in (2 mins or more), when it is in manual it takes 10 secs for log in.

    you mean the local.profile?
    i have the next values
    export ORACLE_BASE=/export/home/oracle
    export ORACLE_HOME=/export/home/oracle/app/oracle/product/11.2.0/dbhome_1
    export ORACLE_SID=XXX
    export ORACLE_TERM=xterm
    export ORACLE_OWNER=oracle
    export TMP=/export/home/oracle/tmp
    export TMPDIR=/export/home/oracle/tmp
    export DISPLAY=:0.0
    J2RE_HOME=/usr/jdk1.6.0_33; export J2RE_HOME
    JAVA_HOME=/usr/jdk1.6.0_33; export JAVA_HOME
    JAVA_BIN=/usr/jdk1.6.0_33/bin; export JAVA_BIN
    PATH=/usr/jdk1.6.0_33/bin:$PATH; export PATH
    & All Matches with the path of the installations of oracle & java
    thanks in advance

  • What is this massage in the mail ( can not get mail, connection to the server faild ) ??

    hello sir,
               what is this massage in the my iphone mail ( can not get mail, connection to the server faild ) ??, why tis massage was showed to me and how to solve this problem because it is so annoying for me.
               if this problem solved will showen for me again ?

    Basically the message is saying the phone can't talk to the place where your email is stored for some reason. This could be an incorrect username/password, or some other issues. Follow the steps in this article and see if they help:
    http://support.apple.com/kb/ts3899

  • Firefox can't establish a connection to the server at 192.168.50.28:6789

    Hello
    I have installed N1 system manager but when i try to open its web page there is an error occur on web page which is i paste below. Any body help me. please i shell be thank full to u.
    Firefox can't establish a connection to the server at 192.168.50.28:6789

    The error you're saying suggests, that your N1SM isn't either configured or didn't start up properly.
    N1SM was EOLed (end of life) long time ago & doesn't support any newer systems or S10 updates
    Also it's slowly nearing EOSL (end of supported life).
    N1SM was replaced by xVM Ops Center, which was released as of version 2.0 two weeks ago.
    I strongly suggest you ask your local Sun representative for xVMOC and disregard N1SM.
    Lubos

Maybe you are looking for

  • HP photosmart C4700 cannot be connected over the network.

    my printer was recently unplugged and refuses to print. i have reinstalled all drivers and software but still cannot connect over the network. please help soon as i desperatley need to print off college work. this has happened before but reinstalling

  • Transporting user defined selection screen from one server to another

    How to transport a user defined selection screen (0100) from one server to another. PBO and PAI modules written in PBO and PAI events for the selection screen are not transported. How to transport the modules in the events for the selection screen.

  • How to implement forgot password policy in OIM

    Hi, I want to implement forgot password Policy on OIM 11g r1. Can any one please help me on this. I mean from where to start and how is the follows goes.. Thanks in Advance :-)

  • Here maps unable to login

    Hi, I just bought Lumia 925. Installed my country map with latest version Here maps. I've problem to login to Nokia account, either login by mobile network or WiFi it said network problem. I tried so many time, it same result. For your info I've succ

  • Regarding Inbound Idoc creation

    Hi, I am trying to create a Idoc from a xml file without using XI. I can read the details from the file and populate a internal table. I am not clear when the IDoc number will be generated. Can any one gtel me which FM actually starts the inbound pro