Can not export projects when Lumetri is applied

I have applied Lumetri Looks to the clips in my project. When I export the project; Pr starts exporting and at about 18%, exports stops and a error message comes up saying "an unknown error occurred".
The only way I can get Pr to export is to remove all instances of Lumetri Looks from my clips.

There does seem to be a bug shaping up with the Lumetri effect and AMD cards.  You're the second I've seen with this issue.

Similar Messages

  • IMovie '10 consumes all RAM and I can not export projects

    A few days ago I upgraded to iMovie '10, but since then consumes all memory, close the application, I can not export projects. I upgraded my Macbook Pro from 4GB to 8GB of RAM, but the problem persists. I'd like to iMovie 9.0.9 but I do not know how to do

    I have this same issue also, on my MacBook Pro. When I click 'export project' nothing comes up at all.
    It's very frustrating and I have tried everything also:
    All files rendered
    Re-installed FCPX
    The only change i've made since it has started happening was upgrading to Mavericks OS X 10.9.1. So it has to be something to do with that.
    I was wondering and hoping if you have since solved the problem, and can help me with a solution to amend it.
    If anyone else can help it will be much appreciated, and most thankful.

  • I can not export my Final Cut Pro X Project

    Hi everyone
    I am seeking help big time!
    I have completed my FCP project on FCPX, but I can not export.
    When I click on "export project" it does nothing and when I send to compressor or trying to export by using compressor settings or trying to export to media browsers ot apple devices, it says " failed" even before starting to export
    All my files at my project are rendered alredy.
    I have re-installed FCPX
    I have purchased latest version of compressor (4.1)
    BTW I am on Mavericxs 10.9.1
    What might be the problem?
    Any help is much appreciated
    Thank you in advance for the help
    Regards
    Yusuf

    I have this same issue also, on my MacBook Pro. When I click 'export project' nothing comes up at all.
    It's very frustrating and I have tried everything also:
    All files rendered
    Re-installed FCPX
    The only change i've made since it has started happening was upgrading to Mavericks OS X 10.9.1. So it has to be something to do with that.
    I was wondering and hoping if you have since solved the problem, and can help me with a solution to amend it.
    If anyone else can help it will be much appreciated, and most thankful.

  • I can not export a project to roll the camera

    I can not export a project to roll the camera displays a message "an error occurred in exporting"

    Hi wishborne,
    I'm here to help! Are you unable to log in to ExportPDF, or unable to convert files once you're logged in? I tried to check your order history, but don't see any orders under the email address that you use here. Did you perhaps sign up using a different email address, or sign up via Adobe Reader?
    I look forward to hearing back from you. We will get to the bottom of this.
    Best,
    Sara

  • I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times.

    I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times. What do I do?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project.  Does anyone know of a way to still export this project?

    My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project.  Does anyone know of a way to still export this project?

    jkrijgsman wrote:
    Does anyone have a good workaround for burning a DVD from an iMovie project now that iDVD is no longer around?
    There's Toast.
    http://www.roxio.com/enu/products/toast/titanium/
    $79.99
    Final Cut Pro X will also burn DVDs.
    $299.99
    How large is your movie?  Is it possible that you could output it as a QuickTime file and then burn that as a data DVD?  Is uploading to YouTube an option?
    Matt

  • Can not print report when using HTML or DHTML

    Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
    Any Ideas?
    Thanks
    Jeff

    Hi,
    I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
    Thanks,
    SK.

  • Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

    Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

    When FCP/FCS begins to act unexpectedly, the usual first step is to trash your preferences:
    https://discussions.apple.com/docs/DOC-2491
    MtD

  • Is it possible to transfer iMOVIE 11 projects between my iMac and iPad2 so that I can work on projects when I'm away from home?

    Is it possible to transfer iMOVIE 11 projects between my iMac and iPad2 so that I can work on projects when I'm away from home?

    ARD is totally unnecessary and inapplicable for your scenario. ARD is a Mac OS X application for managing other Macs and is not useful if you want to connect to a Mac from some other OS. Mac OS X has a VNC client build int, so VNC,  or one of the number of other remote control solutions - LogMeIn, for instance, if they offer a Linux version - is where you want to be looking.
    Regards.

  • I have treated photos in final cut using effects. The problem is I can not export them. Please help me. Thank you-

    I have treated photos in final cut using effects. The problem is I can not export them. Please help me. Thank you-

    Ernest,
    This is how I do it: With all the video & still's in the time line, I click on each (even if I have to use the command key and click on each file). When each file is active I go under SHARE- go to EXPORT MEDIA- I use the Apple Pro Res codec 4:2:2. If you do not click on each file in the time line it will not be exported out.
    Hope this helps.

  • Can not export to a quicktime movie

    So, I've spent the past two weeks putting this wedding video together on final cut express HD 3.5.1 and I'm all set to burn it to a DVD. I figured the easiest way to do this would be through iDVD. iDVD recommends that, while in FCE, I choose the "Export to quicktime movie" command to create a quicktime file that I can then drag and drop to iDVD. Sounds easy enough, but I simply can not export my project to QT in FCE. Every time I attempt to do so, one of two things happens: 1) after about a second of "writing audio and video" it quits w. the following error message: "file error: unknown file" or 2) the entire project is "written," but the created QT file will not open up and does not give a helpful explanation as to why.
    By no means am I married to iDVD or QT if anybody has any other suggestions as to how I can feasibly get my FCE project somehow burned onto a DVD. But if anybody has any suggestions w/ or w/o exporting to QT, please please please help me as soon as you can. This is my sister's wedding video and she and her husband will be moving to colorado next week! I really need to get this to her before then.
    My scratch disk is an external HD - USB-HDD (FAT32) Processor: 2 GHz Intel Core Duo, Memory: 2GB 667 MHz DDR2 SDRAM

    I have to plead ignorance regarding the firewire "drive" that you're referring to. My USB-HD is connected with a firewire cable. I'm not familiar with the distinction between this type of connection and a "firewire drive."
    You might be interested to know I was able to successfully export a ten-minute DVD clip (with multiple tracks and rendered video) excerpted from my final cut project and subsequently burn it to a DVD. It didn't look like it had exported successfully, because it was still a .fcp file. I simply changed it to a .mov and changed the default opener from FCE to Quicktime and "voila" I had a quicktime movie. Too bad I can't get the same thing to work for the two-hour project.
    Nonetheless, the fact that I was able to get the clip on a DVD gives me confidence that somehow, some way I can convert my whole project to a quicktime file. It's my hope that someone will read this forum and burst forth with a fresh, imaginative approach keeping in mind I'm not about to run out and spend two hundred bucks on a third hard drive I don't need.
    Thanks for your suggestions. Please keep them coming if you have any other ideas.

  • I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

    I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

    So it sounds like you are trying to burn a DVD with photos on it so the photos can be either transferred to or displayed on a Windows PC, is that correct?
    For the purposes of this I am going to assume you are using iPhoto '11.
    Gather the photos you want to burn to DVD in one album in iPhoto. This is not absolutely necessary but it sure makes things easier for me.
    Select that album, then go to the File menu and select Export...
    In the dialog that shows up, select the File Export tab. Select the setting you want to use for export. Click the Export button.
    Another dialog will show up. Set the location to Desktop and click the New Folder button. Name the folder something nice and descriptive and click the Create button.
    Click the OK button. Quit iPhoto as the rest of this work will be done in the Finder.
    You will now have a folder on your desktop with that nice descriptive name. Find it and select it. Go to the File menu and from it select Burn "Descriptive folder name" to Disc...
    Insert a blank DVD when prompted.
    Let the finder complete the work and eject the disc afterwards.
    That's it. Best of luck.

  • Can not export dimensions to HFM application Entity

    Hi
    I'm trying to integrate Oracle Hyperion FM 11.1.1.3 with Oracle eBS R12.
    I've successfully registered the source system and the target application.
    I've successfully created a metadata rule but when I run the process, the following step failed: "Can not export dimensions to HFM application Entity"
    The log indicates the following:
    Error in LKM COMM Load Members into HFM - Load Metadata to HFM
    Traceback (most recent call last):
    File "", line 277, in ?
    *com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Metadata load failed. Error code: 0x800443C1 [Can not load metadata because of integrity constraints]*
    My Environment: Win server 2003 on VM, oracle 10g
    Thanks in advance

    Hello WPauffhausen,
    Thank you for your reply.
    I've read the ERPi/FDM Adapter ReadMe ( [http://download.oracle.com/docs/cd/E17236_01/epm.1112/fdm_adapter_readmes/erpi_fin_b_source_adapter_readme.pdf] ) but I didn't find any patch related to ODI.
    I've configured ODI and used ERPi in workspace to perform the integration process. Have I to use FDM in order to complete the integration process?
    I followed the following demo on Oracle University [http://oukc.oracle.com/static09/opn/apps09/ebusiness_suite_11i/84326/111809_84326/111809_84326_DEMO.html]
    This demo doesn't use FDM (workbench) to complete the integration process.
    Regards,
    Ahmed

  • Full list of schemas not exported / imported when FULL=Y

    Hi Guys,
    Verison: 10.2.0.5
    Can advise on the full list of schemas not exported / imported when FULL=Y?
    thanks!

    dbaing wrote:
    Hi Guys,
    Verison: 10.2.0.5
    Can advise on the full list of schemas not exported / imported when FULL=Y?
    thanks!System schemas. Please see the following:
    http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_export.htm#i1006790
    http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#i1006790
    You may also be interested in the following:
    -How to Perform A Full Database Export Import During Upgrade, Migrate, Copy Or Move Of A Database [ID 286775.1]
    -Oracle DataPump Quick Start [ID 413965.1]
    -How To move Or Copy A Database Using DataPump [ID 855268.1]

  • IMOVIE - can not export, error message

    I can not export or finalize my project.  It keeps giving me an error message everytime I try to do it.  PLEASE HELP!!
    Ive done other projects in the past with no problem.  I just cant get this one to work

    I can not export or finalize my project.  It keeps giving me an error message everytime I try to do it.  PLEASE HELP!!
    Ive done other projects in the past with no problem.  I just cant get this one to work

Maybe you are looking for