Can not export to Quick time

Hello Apple Geek
I have a little minor problem that bugger me...I have edited a movie in iMovie and try to export it to Quick Time and I can't. It said an error occured -50
I have 2 Quick Time version on my Mac version 7 and 10. The reason for the export is that I just acquired an Adobe software for professional film editing and it seems to read only Quick Time but not iMovies. I have only one Quick Time movie in my video library that's how I realised this. Any way you could help on this matter would be greatly appreciated.
Thank you for all your help.
Fred

Hi
Error -50
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video. UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Yours Bengt W

Similar Messages

Can you export a Quick Time REFERENCE file from Final Cut Pro X?

Used to be in FCP-7, you could export your timeline and at the bottom of the Export dialog box, there was a check box where you could check "Make the movie self-contained," which would export a full Quick Time .mov file, or you could UNCHECK that box and FCP would export a Quick Time REFERENCE file (referencing the source media used within the timeline), which you could then bring in to any one of a number of different encoding apps.
I prefer to use Sorenson Squeeze to do my encoding, as it's much, much faster than Compressor and has infinitely more format options (Flash, Windows Media, Real, etc., etc.).
But now, I don't see a way to export a Quick Time Reference file from the Final Cut Pro timeline, er, uh, storyline, er, uh, project.
Anybody know if there's a way to export a Quick Time REFERENCE file (not a full Quick Time .mov)?

R&B wrote:
Anybody know if there's a way to export a Quick Time REFERENCE file (not a full Quick Time .mov)?
I do the same thing with Final Cut Express, actually. Only I then open the reference file up in QuickTime Pro and re-export it to an h.264 mp4. I can do that multiple times in the background vs. getting caught up in Final Cut's pathetically non-threaded user interface when it's saving/exporting.
I was going to ask the exact same question here, but you beat me to it. And so far it sounds like the answer is "no" ... :-(
jas

I can not record in quick time

Hello I up graded my computer to Quick time pro and when I hit the record new movie a pop up comes on the screen and says can not find a recording device make sure it is pluged in and not in use. My camera is plugged in and not in use. How do I record directly into quick time from my camera?

Let's try this.
With my JVC mini DV camcorder I have to put the camcorder into play mode then push the play button on the camcorder to play the movie in the camcorder.
Then prompt QT to recognize the movie [new movie].
p.s. Is your camera a camcorder or a digital still camera? My post is responding as if you have a camcorder, but it may work with a still camera that is playing a QT movie that was made with the camera.
If all this doesn't work then perhaps the previous poster is correct in your camera may be too old and records in a format not recognized by QT.

Can not "fully install" Quick Time on Windows Media Edition

My HP Pavillion 8000, operating on Windows Media Center, came preloaded with i tunes and Quick Time. I was initially able to use ArcSoft's multimedia e-mail program (also preloaded) and the SAVE AS feature of this program and save e-mails in Quick Time's (.mov) format (the other option is to save in the (.exe) format, which is NOT deliverable by hotmail - another sad story...)After a while, without me doing anything specific, this feature QUIT WORKING. Every time I try to save as "Quick Time (.mov) format" I get an error message stating: "you must first fully install Quick Time before you are able to perform this action". I thought upgrating to Pro might solve this problem, it did not, total waste of money. I uninstalled and reinstalled both Quick Time and Arc Soft's Multimedia e-mail, no luck. I cleaned out my registry (based on advise in this forum), and re-installed, no luck. Any suggestions? If not for the specific problem, any other good multimedia e-mail package that can save in formats deliverable by hotmail?

Thank you very much Jacumba, but I have managed to get it installed now, I do not know what really happened but all is well now.. Thank you again for taking the time to want to help me out. Have great day!

I can not export Flash animations successfully as a Quick Time Video. Please Help...

Hello there,
I have been trying to both publish and export a Flash
animation from a native Flash file as a Quicktime .mov file. I am
using Flash 8 and have Quicktime 7.1.3 installed on my Mac running
OSX 10.4.8 - I get an error message every time I try to publish the
animation as Quicktime saying "An error occurred because a required
Quick Time component could not be found." My Quick Time program
works perfectly in all other programs. I tried it on another
computer and got the same error. I tried several different settings
and worked through the Flash Help Guide with no luck.
I also tried to do File / Export / Export Movie / Quick Time
Video. When I use this option it does successfully complete an
export but Quicktime file ".mov" has missing graphics and no sound
from the original Flash animation. Can you help me please. I need
to import this animation in a Keynote presentation ultimately.
Thank you.

Thanks Nickels55 - beat me to that ink :)
Also - try setting publish settings to flash player 5 - you
may lose some flash 8 features if you
are using any.
Personally - I find the best solution is SWF2Video
(www.flashants.com) but I am afraid there's no
Mac version (i think).
Usually Macs are better than PCs when it comes to export to
quicktime because you have the option of
choosing quicktime video - but make sure, if you are
exporting to a true video (fixed frame rate)
format you do not use movie clips or actionscript at all
(convert all movie clips to graphic or
place on main timeline).
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
Brandoski wrote:
> Hello there,
> I have been trying to both publish and export a Flash
animation from a native
> Flash file as a Quicktime .mov file. I am using Flash 8
and have Quicktime
> 7.1.3 installed on my Mac running OSX 10.4.8 - I get an
error message every
> time I try to publish the animation as Quicktime saying
"An error occurred
> because a required Quick Time component could not be
found." My Quick Time
> program works perfectly in all other programs. I tried
it on another computer
> and got the same error. I tried several different
settings and worked through
> the Flash Help Guide with no luck.
>
> I also tried to do File / Export / Export Movie / Quick
Time Video. When I
> use this option it does successfully complete an export
but Quicktime file
> ".mov" has missing graphics and no sound from the
original Flash animation.
> Can you help me please. I need to import this animation
in a Keynote
> presentation ultimately. Thank you.
>

Can't use Final Cut Express Export Using Quick Time Conversion with iDVD.

I am using iDVD 08v 7.0.4 and until 3 days ago I could import and create iDVD's using Final Cut Express export using Quick Time Conversion. There was an update that downloaded for iDVD. Since then, I can only use Final Cut Express Exports that is a self contained Quick Time Movie.
I have never had this kind of apple and apple problem. I am disappointed that I'm having apple issues like this.

Are you on latest 10.5.x release and latest FCE updates? Your info line says 10.5.1 and you didn't list FCE version. Not saying that will fix problem, but might help. You also might want to explain how you did your Quicktime conversion.

After installing Maverick, my downloaded movies will not play in Quick Time. It gives me the following error "You can't open the application "QuickTime Player.app" because it may be damaged or incomplete." What can I do?

After installing Maverick, my downloaded movies will not play in Quick Time. I receive the following error message:
You can’t open the application “QuickTime Player.app” because it may be damaged or incomplete. So I tried to unistall QT and I get an error that says, You can not delete this application as it is a requirement for the OSX.
Well I did find a way to delete it, by going into the various components and one by one deleting it. Now I reinstall it and the message is that this Quick Time is for an earlier version before Maverick 7. SMH....Now what.?

Hello, terrygav.
I would recommend processing a reinstall of Mavericks.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason H.

I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times.

I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times. What do I do?

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

I've problems exporting in quick time : green line and got a video that doesn't go smooth

every time i try to do export with quick time i got problems :
green line
video that that stops every now and then
is it a problem of the machine or of the video
for last i tried to share media and i got a video that go smothly but when i burned the dvd i got bucgs again

i read around that quick time has some problems with two graphic cards but not final cut x
yes i've got two graphic cards but i can't manage to remove one of them.
infact i'vea mac pro1.1 and i had to buy a new graphic card ( one that i fonundcompatible with final cut and my mac )
to makefinal cut pro x run. the problem is that the computer recognize andinstall the driver card only if i leave the oringinal one as well.
if i try toturn on the computer only with the new card there is no signal to thevideo.
hope youcan give any help

Final Cut Express Quits when exporting using Quick Time conversion to MPEG2

I'm new Mac user and I'm trying to compress a movie from Final Cut Express HD when exporting using Quick Time conversion to MPEG2 format when I do that Final Cut application quits.
and if helps you to answer I have the same problem trying to do the same from iMovie HD and from Adobe Premier 6.5

"exporting using Quick Time conversion to MPEG2 format"
I'm not sure how you can get to that point: I cannot even find MPEG2 in my list of compression types while exporting with QuickTime Conversion... (I have 31 of them, and QT 7 Pro installed).
In any case, if you want to make a DVD and have iDVD installed, you have simply to Export/QuickTime Movie (without conversion): iDVD will take care of compressing your movie for you before burning the DVD.
Piero

I can not export my Final Cut Pro X Project

Hi everyone
I am seeking help big time!
I have completed my FCP project on FCPX, but I can not export.
When I click on "export project" it does nothing and when I send to compressor or trying to export by using compressor settings or trying to export to media browsers ot apple devices, it says " failed" even before starting to export
All my files at my project are rendered alredy.
I have re-installed FCPX
I have purchased latest version of compressor (4.1)
BTW I am on Mavericxs 10.9.1
What might be the problem?
Any help is much appreciated
Thank you in advance for the help
Regards
Yusuf

I have this same issue also, on my MacBook Pro. When I click 'export project' nothing comes up at all.
It's very frustrating and I have tried everything also:
All files rendered
Re-installed FCPX
The only change i've made since it has started happening was upgrading to Mavericks OS X 10.9.1. So it has to be something to do with that.
I was wondering and hoping if you have since solved the problem, and can help me with a solution to amend it.
If anyone else can help it will be much appreciated, and most thankful.

FCE crashes when export using Quick Time

Hi All,
When I select "Export - Using Quick Time Conversion", FCE crashes. I tried to repair permissions and rebooted but it did not help.
Export using QT was working fine last week. I did some maintenance checks with Onyx over the weekend. Could it be the problem.
Any suggestions for fix?
Thanks.

2007 MacBookPro
Mac OSX V10.6.3
2.2 GHZ Intel Core 2 Duo
4GB RAM
FCE Scratch Disk is an external 500GB drive (it has always been and it's been working fine the last 1.5 years) External drive is connected via FW800.
In Final Cut, I use HDV1440X1080 1080i. Please let me know if you need any other settings.
I use Quick Time V10.0 (113)

I have treated photos in final cut using effects. The problem is I can not export them. Please help me. Thank you-

I have treated photos in final cut using effects. The problem is I can not export them. Please help me. Thank you-

Ernest,
This is how I do it: With all the video & still's in the time line, I click on each (even if I have to use the command key and click on each file). When each file is active I go under SHARE- go to EXPORT MEDIA- I use the Apple Pro Res codec 4:2:2. If you do not click on each file in the time line it will not be exported out.
Hope this helps.

Can not export to a quicktime movie

So, I've spent the past two weeks putting this wedding video together on final cut express HD 3.5.1 and I'm all set to burn it to a DVD. I figured the easiest way to do this would be through iDVD. iDVD recommends that, while in FCE, I choose the "Export to quicktime movie" command to create a quicktime file that I can then drag and drop to iDVD. Sounds easy enough, but I simply can not export my project to QT in FCE. Every time I attempt to do so, one of two things happens: 1) after about a second of "writing audio and video" it quits w. the following error message: "file error: unknown file" or 2) the entire project is "written," but the created QT file will not open up and does not give a helpful explanation as to why.
By no means am I married to iDVD or QT if anybody has any other suggestions as to how I can feasibly get my FCE project somehow burned onto a DVD. But if anybody has any suggestions w/ or w/o exporting to QT, please please please help me as soon as you can. This is my sister's wedding video and she and her husband will be moving to colorado next week! I really need to get this to her before then.
My scratch disk is an external HD - USB-HDD (FAT32) Processor: 2 GHz Intel Core Duo, Memory: 2GB 667 MHz DDR2 SDRAM

I have to plead ignorance regarding the firewire "drive" that you're referring to. My USB-HD is connected with a firewire cable. I'm not familiar with the distinction between this type of connection and a "firewire drive."
You might be interested to know I was able to successfully export a ten-minute DVD clip (with multiple tracks and rendered video) excerpted from my final cut project and subsequently burn it to a DVD. It didn't look like it had exported successfully, because it was still a .fcp file. I simply changed it to a .mov and changed the default opener from FCE to Quicktime and "voila" I had a quicktime movie. Too bad I can't get the same thing to work for the two-hour project.
Nonetheless, the fact that I was able to get the clip on a DVD gives me confidence that somehow, some way I can convert my whole project to a quicktime file. It's my hope that someone will read this forum and burst forth with a fresh, imaginative approach keeping in mind I'm not about to run out and spend two hundred bucks on a third hard drive I don't need.
Thanks for your suggestions. Please keep them coming if you have any other ideas.

How can i convert a quick time movie file to a cd that will play in a car stereo?

how can i convert a quick time movie file to a cd that will play in a car stereo?

In quicktime, I would try File -> Export -> Audio. It will create an audio file. Then drop it onto your playlist into iTunes. Burn the list from itunes with File -> Burn to disk and then select Audio CD.
If you have Quicktime 7 it should be easier and export to AIFF directly

Can not export to Quick time

Similar Messages

Maybe you are looking for