Can not find imaqView3D function panel in labwindows/cvi!

followed what the on-line support told me (add the imaqView3D function declaration into my source code), it does not still work! So seek help from you! thanks so much!

David,
You will probably have a better chance of having your question answered if you posted your question to the Vision or LabWindows/CVI Developers Exchanges.
Regards,
Erin

Similar Messages

Download ios 7, and the location function is off, I can not access because I forgot the key constraints, I can not restore the iphone because I can not find iphone app access

download ios 7, and the location function is off, I can not access because I forgot the key constraints, I can not restore the iphone because I can not find iphone app access

If you have a passcode to the screen lock that you've forgotten, restore the device from the computer to which the device is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
If your device is running iOS 7 and you set up Find My iPhone (iPad/iPod), however, then it has the Activation Lock on it and you'll need to enter in your Apple ID and password to activate the device after restoring:
http://support.apple.com/kb/HT5818
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Can not find size_t during import a dll and calling a function crash labview

Hello, experts
I need to use FingerLakeInstrument DLL ( see the attached) inside Labview to talk to a CCD camera. it is built from microsoft visual studio C++
I unzip FLI dll in my D:\proj\...\linfli-32 and import dll from there. created a c:\FLIDBG.txt as FLI dll needs to write debug message to it if FLISetDebugLevel() or others are called.
During importing the dll, first thing I got is <sys/types.h> ( ie size_t ) cannot be found. I have installed free version of microsoft visual studio C++
but can not find "typedef unsigned int size_t"
at the end, I just added
typedef unsigned int size_t;
in the libfli.h. Having done that, I am able to import all functions into Labview and have a user library called libfli.
However, as soon as I start calling a simple function in a test.vi, such as FLIGetLibVersion(char* ver, size_t len), which involves nothing other than the library, the labview will crash.
I created a simple C test.exe which calls many functions without any problem
any suggstion?
regards
xiaofeng
Solved!
Go to Solution.
Attachments:
libfli-32.zip ‏93 KB

Hi, Smercurio_fc
thanks for your reply. Yes, you are pointing to the right place. I have solved the crash problem.
when importing DLL into Labview using Tools\import\Shared Library (.dll), Labview automatically set the calling convention as C not as stdcall (WINAPI). it is this that later the labview crashes when a function is called. as soon as I manually re-selecte calling convention as stdcall, my test.vi works OK (see attached).
I tried Call Library Function too to call libfli.dll, as long as I select stdcall as call convetion. the test.vi works.
How do I know which Call convention I need to choose if there is no infomation from DLL provider?
as for the size_t,
I add #include <crtdefs.h> in libfli.h and
add additional include path as
C:\Program Files\Microsoft Visual Studio 10.0\VC\include. this solved the "not found" issue.
for this case I know that the DLL is built from VC++, is this right way?
again, thanks for your time.
xiaofeng
Attachments:
test.vi ‏13 KB

Can not find Function module in Crystal Report Database Connections FN

Hi,
we designed a Function Module XX in SE80.
We set up BO Interagtion for SAP
We can connect to the R3( CRM) System.
We can See FN's.
We can not see our Function Module XX we designed in SE80 in the Database Connection
What is missing ?
Any Authorization missing ?
Which Where
Thanks
Martin Sautter

Yes,
we just have got it:
/Database Assistant / Data / My Connections/<myConnection>/FN -> Right Mice Button/ Options -> Table Name Like: <MYTABLE>
than
/Right Mice Button/Regenerate
Thanks
Martin

Functional content library missing... can not find where to download.

Hello,
I have read all the threads on why I have no templates and styles in my encore.
I have determined that because i got the software from my network admin they probaly didn't install these folders.
It looks like i dont have them for much of mly creative suite (production premium)
Is there a place to download them?
I can not find them using my adobe login info as the software does not appear in any "purchases"
Thanks for your help.

>hoping I could get them faster from adobe then our admin
As far as I know, the person who signed in to buy the software must be the one to download all the pieces
>I can not find them using my adobe login info as the software does not appear in any "purchases"
You did not buy, so you may not download

Itunes can not find my iphone6(V8.1.2)

1. after actived my iphone6 2days, it work off and display No Service.
2. connect to windows7 PC, itunes can not find the iphone6 device. iphone6 versiion is 8.1.2, itunes' is 12
please share solution with me ,thanks

Hi XuanLe,
Welcome to the Support Communities! The resources below will help you troubleshoot the issue you are having of No Service (cellular data) and syncing with iTunes 7 on your PC.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
http://support.apple.com/en-us/TS4429
If you're in your carrier's coverage area
Follow these steps, testing after each.
Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Restart your device.
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Contact your carrier to check for any network or account issues.
Restore your iPhone.
If you see No Service while roaming or traveling
You might be outside of your carrier's coverage area. If you're traveling internationally, you'll need an international roaming plan to use your iPhone or iPad.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
http://support.apple.com/en-us/TS1538
Click on the link above to see the complete article. I've hightighted the information pertinent to Windows 7 for you.
Restart
Turn off your computer and your iOS device, then turn them on again.
Update your computer
Check to make sure that you've installed all required updates for your computer.
Update iTunes
Check that you have the latest version of iTunes installed on your computer.
Make sure your iOS device trusts your computer
If you connect your iOS device to your computer and see "If you have not connected your iOS device to this computer before, unlock the device and tap Trust," make sure that your device trusts the computer.
Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
Verify that Apple Mobile Device Support is installed
iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
Windows Vista and Windows 7
Click Start.
Choose Control Panel.
Click "Uninstall a program" (or, if you're using Windows Vista's Classic View of the Control Panel, click "Programs and Features").
Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
If after reinstalling iTunes Apple Mobile Device Support is still not installed, learn how to resolve issues installing iTunes for Windows.
Restart the Apple Mobile Device Service
Learn how to restart the Apple Mobile Device Service (AMDS) on Windows.
Verify that the Apple Mobile Device USB Driver is installed
Windows Vista, Windows 7, and Windows 8
Connect the device to the computer.
Quit iTunes if it launches.
For Windows Vista and Windows 7:
Click the Start menu, right-click on Computer, and choose Properties.
In the upper-left corner, click Device Manager. The Device Manager window should open.
Click the plus (+) icon (or disclosure triangle () (for Windows 7 and Windows 8) next to "Universal Serial Bus controllers" to expand this selection.
Locate the Apple Mobile Device USB Driver in this list. If this entry is displayed without any downward arrow, "!" or "?" symbols over it, then this driver is successfully installed. Continue to "Check for third-party software conflicts".
If the Apple Mobile Device USB Driver is not listed, continue to "If the Apple Mobile Device USB Driver is not listed".
A downward arrow appearing next to the device's entry in Device Manager indicates that this device is disabled. To enable this device, right-click its entry in Device Manager and choose Enable from the shortcut menu.
If the Apple Mobile Device USB Driver entry is listed, but has an exclamation mark or question mark over it, reinstall the Apple Mobile Device driver:
Right-click the Apple Mobile Device entry in Device Manager.
Choose Uninstall from the shortcut menu.
When prompted, select the box "Delete the driver software for this device," and click OK.
In the resulting dialog box, click OK.
In the Device Manager window, right-click "Universal Serial Bus controllers" and choose "Scan for hardware changes" from the shortcut menu.
Windows automatically reinstalls the necessary drivers and attempts to remount the device.
If the Apple Mobile Device USB Driver entry still has an exclamation mark or question mark over it, right-click this entry and choose Properties. Under the General tab, look beneath "Device status."
If you see a message that reads: "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)," see the section below for Error Code 52.
If you see a different error code, manually update the Apple Mobile Device driver:
Right-click the Apple Mobile Device entry in Device Manager.
Choose Update Driver Software.
Select "Browse my computer for driver software."
Select "Let me pick from a list of device drivers on my computer."
Click the Have Disk button. If the Have Disk option is not available, choose a device category such as Mobile Phone or Storage Device (if listed). Then click next. The Have Disk button should appear.
Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers instead).
Click Open in the Have Disk window. Click Next. Then click Finish. Windows will install the driver.
During installation, if a message appears stating that the software you are installing "has not passed Windows Logo testing," click Continue Anyway to continue installing the drivers.
You can find solutions to other common errors and error code numbers in this Microsoft article.
Error Code 52
You might see this message in the Properties window for your device: "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)."
To resolve Error Code 52:
Install all available updates for Windows. See this Microsoft article for more information on how to do this.
Consult your computer manufacturer for updates for your computer's drivers, including disk drives, chipsets, and USB controllers.
Temporarily disable "forced driver signing enforcement" as follows:
Restart your computer.
While restarting, press the F8 key.
Windows Vista and Windows 7:
The Windows Advanced Options list should appear. Press the Arrow Down key until "Disable forced driver signing enforcement" is highlighted.
Press the Return key.
Press the Return key.
Click "Change defaults or choose other options".
Click "Choose other options".
Click "Troubleshoot".
Click "Advanced options".
Click "Startup Settings".
Click "Restart" when prompted.
When prompted, press the 7 key to "Disable driver signature enforcement".
Reconnect the device.
If the device is recognized successfully, then you'll need to perform these steps each time you start your computer. Consult Microsoft, or whoever supports the installation of Windows on your computer, for more troubleshooting to resolve the issue without having to select this option each time.
If the Apple Mobile Device USB Driver is not listed
Disconnect the device from the computer.
Save a screenshot by pressing the Home button and the Wake/Sleep button at the same time (the screen should flash briefly). Taking screenshots and saving images on iPod touch requires iOS version 2.0 or later.
Reconnect the device to the computer.
Open the Device Manager in Windows:
Windows Vista or Windows 7:
Click Start.
In the dialog, type devmgmt.msc.
Press Return.
If Windows needs your permission to continue, click "Continue".
Expand all the sections labeled below (not all sections might be listed):
Imaging Devices
Other Devices
Portable Devices
Universal Serial Bus Controllers
Look for the entry that recognizes the device as a camera. This entry should be called Apple iPhone, Apple iPad, or Apple iPod.
If only "Unknown Device" appears:
Right-click on the "Unknown Device" entry.
Choose "Properties" from the shortcut menu.
Click the Details tab.
In the drop-down menu, select "Hardware IDs."
If the hardware ID displayed starts with:
USB\VID_0000&PID_0000
This means that Windows cannot read the hardware IDs of the device, and so has replaced them with all zeros. This is typically caused by a faulty USB connection, or an incompatibility with your USB chipset drivers.
Disconnect the device, and unplug all USB devices from your computer.
Shut your computer down, then power it back on.
Reconnect your device, testing each USB port for approximately 30 seconds to see if your device is recognized.
Test with an alternate, known-good 30-pin to USB cable or Lightning Connector to USB cable if available.
If you have an external USB 2.0 hub available, connect the hub to your PC, and then connect the iOS device to the hub.
If your device shows up in iTunes, try disconnecting the external USB 2.0 hub and connecting the iOS device directly to your PC. If the issue returns, you may need to use the external USB 2.0 hub as a temporary workaround. Then, consult your computer manufacturer for any updates for your USB chipset.
If "Unknown Device" appears when connecting your device to more than 1 known-good computer, with more than 1 known-good USB cable, your device might need service. Learn more about your service options.
If the device is not recognized while in Recovery Mode
Your device might not be recognized while in recovery mode. This can happen during an update or restore of your device. Typically, when your device is in recovery mode, it will show the "Connect to iTunes" logo on its display. If iTunes does not recognize the device when in this state:
Windows Vista or Windows 7:
Click Start.
In the dialog, type devmgmt.msc.
Press Return.
If Windows needs your permission to continue, click "Continue".
Click the disclosure triangle () (for Windows 7 and 8) next to Imaging Devices, Other Devices, Portable Devices, and Universal Serial Bus Controllers to expand these sections.
Check these sections for one or more entries called Apple Mobile Device (Recovery Mode). These entries might or might not have exclamation marks on them.
If you see only one "Apple Mobile Device USB Driver" entry that has no errors on it:
Find out if the computer has USB 3.0 ports. Within Universal Serial Bus Controllers, locate any entries containing "USB 3.0" or "SuperSpeed USB" in the title. If these are listed, you have USB 3.0.If you have USB 3.0:
Try to connect the device to a different USB port. Try each port until the device is recognized. Some computers will have dedicated USB 2.0 and 3.0 ports. If so, a USB 2.0 port might resolve the issue.
Refer to your computer manufacturer for updates to the USB 3.0 chipset drivers.
If the issue persists, continue to "Check for third-party software conflicts."
If you do not have USB 3.0
Continue to "Check for third-party software conflicts."
If you see two "Apple Mobile Device (Recovery Mode)" entries with exclamation marks on them:
Open the Device Manager and connect your device.
Click the View menu.
Select "Devices by connection."
Locate the erroneous "Apple Mobile Device (Recovery Mode)" entries. You might need to expand all sections of the Device Manager to see them.
Directly above these entries will be a USB Composite Device entry.
Depending on your version of Windows, take the following steps to update this driver:
Windows Vista, Windows 7, or Windows 8:
Right-click the parent USB Composite Device entry.
Choose Update Driver Software from the shortcut menu.
Click "Browse my computer for driver software".
Click "Let me pick from a list of device drivers on my computer".
Click the Have Disk button.
In the "Install from Disk" dialog, click the Browse button.
Use this window to navigate to the following folder:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
Click OK in the "Install from Disk" dialog.
Click Next and finish the driver-installation steps.
Open iTunes to verify that the device is recognized properly, and continue restoring your device.
Check for third-party software conflicts
Certain phone and cellular device connectivity software from vendors such as Samsung, Nokia, Bora, Novatel, Sony, Android, LG, Sierra, Huawei, Pantech, or Motorola might cause your device not to be recognized. If you have such software on your computer:
Uninstall the phone or cellular connectivity software temporarily, and test. Contact the manufacturer of this software for assistance in doing this. If you use the third-party phone or cellular device for your Internet connection, try connecting to an alternate network using Wi-Fi or Ethernet.
Remove iTunes and all related Apple software.
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8
After reinstalling iTunes, test the device.
If you still need your third-party phone or cellular connectivity software that was removed, reinstall this software and test your device to ensure it still functions with iTunes. Contact the vendor of your phone connectivity software if the issue returns.
Also, third-party security software might conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that might be caused by your security software. After resolving any issues that you might have with your security software, you might need to try the steps in this article again.
I hope this information helps ....
- Judy

Help:Can not find the file in jar!

Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)

If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj

Can not find data in virtual cube

Experts,
I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
Can anybody tell me what could be the reasons the data is coming through Virtua cube.
Thanks,
AK

Hi,
i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
regards
Siggi

MapBuilder Error:Can not find a GeoRaster object with specified rdt and rid

Hello,
I can't GeoRaster data in the preview of the MapBuilder and MapViewer. The GeoRasterViewer shows the Raster images without problems.
MapBuilders error message:
19.11.2008 13:07:11 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
The errror message of MapViewer is nearly the same with some more informations about the spatial query and the coordintes of the query window. If I run that spatial query in the sqldeveloper it returns a result!
I did following stebs:
- saved a tiff-Image in a GeoRaster table with pyramid an tiled images.
- checked the sdo_geom_metadata --> they are correct
- checked the sdo_georaster object for the rdt table name and rasterid --> they are correct
- checked the rdt table --> objects with that rid are saved
- checked the mdsys.sdo_geor_sysdata table --> entry is correct
- validate the geraster with the sdo_geor.validategeoraster function --> object is valid
- updated the spatial extend of the image and try again the preview functio--> the same error
The databse server is a virtual Linux server with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit.
The web server is a Window 2003 R2 Server with a weblogic server and mapviewer patch 5 (Ver1033p5_B081010).
For a test I did the same (the same table script, the same raster data, the same import method) on a developer pc (WinXP Pro SP2) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 (32bit) the same mapbuilder version but with the MapViewer QuickStartKid and it works fine!!!
Has anyone an idea?
Greeting,
Cord
Edited by: Corti on Nov 19, 2008 2:14 PM

Hi Joao,
Thanks so far.
I'm previewing a GeoRaster theme. I created it with the MapBuilder GeoRaster wizard. The theme difinition is (out of the export file):
RAS_DGK|
null|
RAS_DGK|
GEORASTER|
<?xml version="1.0" standalone="yes"?>
<styling_rules theme_type="georaster">
</styling_rules>|
(GeoRaster table name is "RAS_DGK", theme name is also "RAS_DGK")
I get following log information:
preview without a coordinate or scale:
MapBuilder Error (as pop up): MAPVIEWER 01005: no spatial data to render
log file:
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-43
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
preview with a center coordinate of the image and a scale:
20.11.2008 10:18:43 oracle.sdovis.SRS getOptimalQueryWindow
AM FEINSTEN: *** isGeodetic=false, unit=METER
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-45
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: 2550045.7746478873,5608500.0,2551954.2253521127,5609500.0
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent, MDSYS.SDO_GEOMETRY(2003, 31466, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?,?,?,?)), 'querytype=WINDOW') = 'TRUE'
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on loading features: 234ms.
20.11.2008 10:18:43 oracle.sdovis.RenderingEngine prepareForRendering
AM FEINSTEN: xfm: 0.284 0.0 0.0 -0.284 -724212.9999999999 1593097.9999999998
20.11.2008 10:18:43 oracle.sdovis.ImageRenderer renderGeoRasterTheme
WARNUNG: GeoRaster theme RAS_DGK has no rendered images.
20.11.2008 10:18:43 oracle.sdovis.VectorRenderer render
FEINER: time to render theme RAS_DGK with 0 styled features: 0ms
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on rendering: 16ms
If I run the sql statement in the log file, it returns a result.
select grt.georid, grt.GEORASTER, grt.GEORASTER.metadata.getClobVal()
from ras_dgk grt
WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent,
MDSYS.SDO_GEOMETRY(2003, 31466, NULL,
MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3),
MDSYS.SDO_ORDINATE_ARRAY(2550045.7746478873,5608500.0,2551954.2253521127,5609500.0)), 'querytype=WINDOW') = 'TRUE';
GEORID
2
GEORASTER
MDSYS.SDO_GEORASTER(20001,MDSYS.SDO_GEOMETRY(2003,31466,null,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),MDSYS.SDO_ORDINATE_ARRAY(2550000,5608000,2552000,5610000)),RDT_RAS_DGK,522,oracle.xdb.XMLType@194a7ec)
GEORASTER.metadata.getClobVal()
<georasterMetadata xmlns="http://xmlns.oracle.com/spatial/georaster">
<objectInfo>
<rasterType>20001</rasterType>
<isBlank>false</isBlank>
<defaultRed>1</defaultRed>
<defaultGreen>1</defaultGreen>
<defaultBlue>1</defaultBlue>
</objectInfo>
<rasterInfo>
<cellRepresentation>UNDEFINED</cellRepresentation>
<cellDepth>8BIT_U</cellDepth>
<totalDimensions>2</totalDimensions>
<dimensionSize type="ROW">
<size>6299</size>
</dimensionSize>
<dimensionSize type="COLUMN">
<size>6299</size>
</dimensionSize>
<ULTCoordinate>
<row>0</row>
<column>0</column>
</ULTCoordinate>
<blocking>
<type>REGULAR</type>
<totalRowBlocks>4</totalRowBlocks>
<totalColumnBlocks>4</totalColumnBlocks>
<rowBlockSize>2048</rowBlockSize>
<columnBlockSize>2048</columnBlockSize>
</blocking>
<interleaving>BSQ</interleaving>
<pyramid>
<type>DECREASE</type>
<resampling>NN</resampling>
<maxLevel>6</maxLevel>
</pyramid>
<compression>
<type>NONE</type>
</compression>
</rasterInfo>
<spatialReferenceInfo>
<isReferenced>true</isReferenced>
<SRID>31466</SRID>
<modelCoordinateLocation>UPPERLEFT</modelCoordinateLocation>
<modelType>FunctionalFitting</modelType>
<polynomialModel rowOff="0" columnOff="0" xOff="0" yOff="0" zOff="0" rowScale="1" columnScale="1" xScale="1" yScale="1" zScale="1">
<pPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>17668678.695368 0 -3.14949718277477</polynomialCoefficients>
</pPolynomial>
<qPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</qPolynomial>
<rPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>-8031218.31607409 3.14949718277477 0</polynomialCoefficients>
</rPolynomial>
<sPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</sPolynomial>
</polynomialModel>
</spatialReferenceInfo>
<layerInfo>
<layerDimension>BAND</layerDimension>
<subLayer>
<layerNumber>1</layerNumber>
<layerDimensionOrdinate>0</layerDimensionOrdinate>
<layerID>1</layerID>
<colorMap>
<colors>
<cell value="0" blue="255" red="255" green="255" alpha="255"/>
<cell value="1" blue="0" red="0" green="0" alpha="255"/>
</colors>
</colorMap>
</subLayer>
</layerInfo>
</georasterMetadata>
I checked also the content of rdt table and it contains entries with that raster id (= 522).
Finally the log file when I use the preview directly on the GeoRaster table without a theme:
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-55
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER from RAS_DGK grt where grt.GEORASTER.rasterid = ? and grt.GEORASTER.rasterdatatable = ?
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
If you need more information - please ask for it.
Cord

Warnings in FileReference - can not find the cause

I'm trying to make a loader of a few photos (use FileReference). I get the warnings, but I do not know the reason for their appearance.
warning: unable to bind to property 'fr' on class 'Object' (class is not an IEventDispatcher)
warning: unable to bind to property 'name' on class 'flash.net::FileReference'
warning: unable to bind to property 'data' on class 'flash.net::FileReference'
warning: unable to bind to property 'fr' on class 'Object' (class is not an IEventDispatcher)
warning: unable to bind to property 'name' on class 'flash.net::FileReference'
warning: unable to bind to property 'data' on class 'flash.net::FileReference'
CODE:
import mx.events.CollectionEvent;
import flash.net.FileReferenceList;
import mx.collections.ArrayCollection;
[Bindable]
private var photos:ArrayCollection = new ArrayCollection;
private var frList:FileReferenceList = new FileReferenceList;
private function init():void
photos.addEventListener(CollectionEvent.COLLECTION_CHANGE,function():void
startUploadButton.enabled = (photos.length>0);
clearPhotosButton.enabled = (photos.length>0);
frList.addEventListener(Event.SELECT,addPhotos);
private function selectPhotos():void
var fileFilter:FileFilter = new FileFilter("Images jpeg","*.jpg;*.jpeg");
frList.browse([fileFilter]);
private function addPhotos(e:Event):void
for (var i:uint = 0; i < frList.fileList.length; i++)
var elem:Object = new Object;
elem.fr = FileReference(frList.fileList[i]);
elem.fr.load();
elem.fr.addEventListener(Event.COMPLETE,refreshThumb);
photos.addItem(elem);
private function refreshThumb(e:Event):void
photosList.invalidateList();
public function clearPhoto(data:Object):void
photos.removeItemAt(photos.getItemIndex(data));
photosList.invalidateList();
private function startUpload():void
photosProgressContainer.visible = true;
var request:URLRequest = new URLRequest();
request.url = "http://localhost/tempLoader-debug/upload.php";
var fr:FileReference = photos.getItemAt(0).fr;
fr.cancel();
fr.addEventListener(ProgressEvent.PROGRESS,uploadProgress);
fr.addEventListener(DataEvent.UPLOAD_COMPLETE_DATA,uploadComplete);
fr.upload(request);
private function uploadProgress(e:ProgressEvent):void
photosProgress.setProgress(e.bytesLoaded,e.bytesTotal);
private function uploadComplete(e:DataEvent):void
photos.removeItemAt(0);
photosList.invalidateList();
if (photos.length > 0)
startUpload();
else
photosProgressContainer.visible = false;

In my opinion this is the line that is causing you the warning:
<mx:Image source="{data.fr.data}" maxWidth="100" maxHeight="75"
horizontalAlign="center" verticalAlign="middle" />
That means that data should be a custom binable object and fr should be another
custom bindable object.
like
public class BindableData
    public var fr:BindableData2;
public class BindableData2
    public var data:String;
I am not sure though what you are trying to do though, but I assume you try top
load an image from your disk. This link will help you:
view source enabled...
http://www.everythingflex.com/flex3/flexcampItaly/
the blog post ...
http://blog.everythingflex.com/2009/09/08/flexcamp-presentation-filereference-load-part-1- of-3/
C
From: Astraport2012 <[email protected]>
To: Ursica Claudiu <[email protected]>
Sent: Sun, October 3, 2010 3:07:57 PM
Subject: Re: Warnings in FileReference - can not find the cause
I found the solution to the first part of the warning. Only need to modify the
object as ObjectProxy
public var elem:ObjectProxy = new ObjectProxy;
But with the second part is still a problem (warning: unable to bind to property
'name' on class 'flash.net::FileReference'
warning: unable to bind to property 'data' on class 'flash.net::FileReference').
I do not fully describe the problem in the first message. The main application
calls the component and passes it parameters. They cause errors.
It is this component photoThumb.mxml:
<?xml version="1.0" encoding="utf-8"?>
   width="120" height="110"
   backgroundColor="#FFFFFF" backgroundAlpha="0"
   rollOver="{controls.visible=true;}" rollOut="{controls.visible=false;}">
<mx:Image source="@Embed('t1.png')" width="100%" height="100%" alpha="0"
horizontalAlign="center" verticalAlign="middle"/>
<mx:VBox width="100%" height="90" y="5" horizontalAlign="center" >
<mx:Image source="{data.fr.data}" maxWidth="100" maxHeight="75"
horizontalAlign="center" verticalAlign="middle" />
</mx:VBox>
<mx:Label text="{data.fr.name}" width="118" truncateToFit="false" bottom="0"
textAlign="center" />
<mx:VBox id="controls" visible="false" y="65" right="10" horizontalAlign="right"
>
<mx:Button label="X" click="parentDocument.clearPhoto(data)" fontSize="6"
width="30" height="15" />
</mx:VBox>
</mx:Canvas

[Error ORABPEL - 10900]... : Can not find definition for element 'process'

Hi,
When I try to deploy a bpel process using JDeveloper I'm having the following xml parse error:
Error(21):
[Error ORABPEL-10900]: xml parser error
[Description]: in line 21 of "file:/C:/JDeveloper/jdev/mywork/NERGA/CriarProjectoSA/bpel/CriarProjectoSA.bpel", XML parsing failed because file:/C:/JDeveloper/jdev/mywork/NERGA/CriarProjectoSA/bpel/CriarProjectoSA.bpel<Line 21, Column 63>: XML-24538: (Error) Can not find definition for element 'process'.
[Potential fix]: Fix the invalid XML.
I don't understand why... Any idea?

Ok.
This is my BPEL code. The sapattern tags are from a program that is generating part of the code. The JDeveloper doesn't show any error, I only get the error when I try to deploy.
<?xml version = "1.0" encoding = "UTF-8" ?>
<process name="CriarProjectoSA"
targetNamespace="http://xmlns.oracle.com/CriarProjectoSA"
suppressJoinFailure="no"
xmlns="http://xmlns.oracle.com/CriarProjectoSA"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns4="http://xmlns.oracle.com/CriarProjectoSA"
xmlns:ns7="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns5="http://schemas.oracle.com/xpath/extension"
xmlns:ns6="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:ns11="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:ns9="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ns1="http://xmlns.oracle.com/ValidacaoProjectos"
xmlns:ns3="http://www.nerga.pt" xmlns:ns2="http://tempuri.org/"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:ns10="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns8="http://schemas.xmlsoap.org/ws/2003/03/business-process/">

<sapattern>
<guid>41207640-d934-480f-902a-b3764f3d9c9f</guid>
</sapattern>
<partnerLinks>
<partnerLink name="client" partnerLinkType="ns4:CriarProjectoSA"
myRole="CriarProjectoSAProvider"/>
<partnerLink name="NergaIS" partnerLinkType="ns2:ServiceSoap_PL"
myRole="ServiceSoap_Role" partnerRole="ServiceSoap_Role"/>
<partnerLink name="ValidacaoProjectos"
partnerLinkType="ns1:ValidacaoProjectos"
myRole="ValidacaoProjectosRequester"
partnerRole="ValidacaoProjectosProvider"/>
<sapattern>

<guid>e728e550-f404-47bf-aa13-72429480cbc6</guid>
<guid>3111d1af-0b31-4d02-b3fc-73d14ce95405</guid>
<guid>e9cdca59-888a-4e67-af54-a63ce2347ad3</guid>
</sapattern>
</partnerLinks>
<variables>
<variable name="outputVariable"
messageType="ns4:CriarProjectoSAResponseMessage"/>
<variable name="inputVariable"
messageType="ns4:CriarProjectoSARequestMessage"/>
<sapattern>

<guid>2503e820-3add-4cd1-bbc5-5cc5fff57090</guid>
<guid>8bcc3532-46b7-4e88-816f-72ecdaee76ab</guid>
</sapattern>
<variable name="invocaVP_initiate_InputVariable"
messageType="ns1:ValidacaoProjectosRequestMessage"/>
<variable name="recebeVP_onResult_InputVariable"
messageType="ns1:ValidacaoProjectosResponseMessage"/>
<variable name="InvocaAdicionarProjecto_InputVariable"
messageType="ns2:AdicionarProjectoSoapIn"/>
<variable name="InvocaAdicionarProjecto_OutputVariable"
messageType="ns2:AdicionarProjectoSoapOut"/>
</variables>
<sequence>
<receive name="recebeTemplate" joinCondition="False" partnerLink="client"
portType="ns4:CriarProjectoSA" operation="process"
variable="inputVariable" createInstance="yes">
<sapattern>

<guid>e728e550-f404-47bf-aa13-72429480cbc6</guid>
<guid>68e62379-55ac-48eb-b681-aee8f5a7696d</guid>
</sapattern>
</receive>
<scope variableAccessSerializable="no" name="ValidarExigências"
joinCondition="False">
<faultHandlers>
<catchAll>
<assign name="assignInvalid">
<bpelx:append>
<bpelx:from expression="concat(ns8:getVariableData('inputVariable','payload','/ns3:Template/ns3:Projecto/ns3:Observacoes'), string('Projecto inválido!!'))"/>
<bpelx:to variable="inputVariable" part="payload"
query="/ns3:Template/ns3:Projecto/ns3:Observacoes"/>
</bpelx:append>
</assign>
</catchAll>
</faultHandlers>
<sapattern>

<guid>2e56af66-6622-43e0-9adc-6d5f109cf374</guid>
</sapattern>
<sequence name="ValidarExigências" joinCondition="False">
<assign name="assignVPIn">
<copy>
<from variable="inputVariable" part="payload"/>
<to variable="invocaVP_initiate_InputVariable" part="payload"/>
</copy>
</assign>
<sapattern>

<guid>2e56af66-6622-43e0-9adc-6d5f109cf374</guid>
</sapattern>
<invoke name="invocaVP" joinCondition="False"
partnerLink="ValidacaoProjectos" portType="ns1:ValidacaoProjectos"
operation="initiate"
inputVariable="invocaVP_initiate_InputVariable">
<sapattern>

<guid>f3bc9c04-f4d2-4e96-acc8-7a6c88a8ced5</guid>
</sapattern>
</invoke>
<receive name="recebeVP" joinCondition="False"
partnerLink="ValidacaoProjectos"
portType="ns1:ValidacaoProjectosCallback" operation="onResult"
createInstance="no" variable="recebeVP_onResult_InputVariable">
<sapattern>

<guid>e9cdca59-888a-4e67-af54-a63ce2347ad3</guid>
<guid>1eba96a8-330a-4e4d-a14b-cdf6641fa614</guid>
</sapattern>
</receive>
<assign name="assignVPOut">
<copy>
<from variable="recebeVP_onResult_InputVariable" part="payload"/>
<to variable="inputVariable" part="payload"/>
</copy>
</assign>
</sequence>
</scope>
<scope variableAccessSerializable="no" name="AdicionarProjecto"
joinCondition="False">
<sapattern>

<guid>89c02eae-7788-4892-a616-e46b65ef1b50</guid>
</sapattern>
<sequence name="InvocarISAdicionarProjecto" joinCondition="False">
<assign name="assignIS">
<copy>
<from variable="inputVariable" part="payload"
query="/ns3:Template/ns3:Projecto/ns3:NomeProjecto"/>
<to variable="InvocaAdicionarProjecto_InputVariable" part="parameters"
query="/ns2:AdicionarProjecto/ns2:nome"/>
</copy>
<copy>
<from variable="inputVariable" part="payload"
query="/ns3:Template/ns3:Projecto/ns3:TipoProjecto"/>
<to variable="InvocaAdicionarProjecto_InputVariable" part="parameters"
query="/ns2:AdicionarProjecto/ns2:tipo"/>
</copy>
</assign>
<sapattern>

<guid>89c02eae-7788-4892-a616-e46b65ef1b50</guid>
</sapattern>
<invoke name="InvocaAdicionarProjecto" joinCondition="False"
partnerLink="NergaIS" portType="ns2:ServiceSoap"
operation="AdicionarProjecto"
inputVariable="InvocaAdicionarProjecto_InputVariable"
outputVariable="InvocaAdicionarProjecto_OutputVariable">
<sapattern>

<guid>76519bd3-c506-4c79-8190-8ff09abdd27d</guid>
</sapattern>
</invoke>
</sequence>
</scope>
<assign name="assignOutput">
<copy>
<from variable="inputVariable" part="payload"
query="/ns3:Template/ns3:Projecto"/>
<to variable="outputVariable" part="payload"/>
</copy>
</assign>
<reply name="devolveProjecto" joinCondition="False" partnerLink="client"
portType="ns4:CriarProjectoSA" operation="process"
variable="outputVariable">
<sapattern>

<guid>e728e550-f404-47bf-aa13-72429480cbc6</guid>
<guid>0dbefef0-3d04-4356-abbc-b291ea40d256</guid>
</sapattern>
</reply>
</sequence>
</process>

In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone?

Why am I getting an error message,"windows can not find(my Yahoo mail launch address)"when accessing Yahoo mail site?

Using WindowsXP, and e-mail via Yahoo,browser is Firefox 4.0.I get the following error message when accessing yahoo mail site:"http://us.f831.mail.yahoo.com/dc/launch?action=welcome&yy=1782408664&.rand=0qrsdp1o...Windows can not find(the above address is inserted here).make sure you typed the name correctly,and try again". After this message is displayed on my desktop it begins to fade,and the inbox of my yahoo mail is then displayed..I am able to work all functions of the mail without problems.( I might add at this point that i access the mail program via a desktop icon).When I close out of the program the error message box with the error described above is displayed again on my desktop.I must click on the "X" to remove it.I can access my yahoo mail via Internet Explorer with no problem,as well as accessing via my yahoo home page.

Here's an image of the ERROR Message. I'm not sure how this forum works -- if this image is an attachment or if it shows up in the body of this reply.
Here goes...

The hp printer control app can not find my eprint email.

I have an iPad 2 and I've installed the hp printer control app on it. The app can not find my eprint email which I've typed in several times. I have checked the eprint email on the printer control panel to make sure it is the correct eprint email. The printer is a office pro 8600.

Dear Diavonex:
I DID what you've recommended: turning off the router. NO SUCCESS.
Best Regards,

HP Officejet 150 mobile, HP scan does not work (Can not find scanner)

Hi,
I just bought a HP Officejet 150 Mobile All-in-One. I installed the complete software package (downloaded from HP Site) with bluetooth on a windows 7 Acer Aspire S5 laptop. Printing seems to work fine, but when starting HP Scan, i get the following error message:
Saing that the software can not find the scanner with suggestions to solve it.
Is it possible to scan with a buetooth connection? Any other suggestions what is going wrong?
Best regards,
Roelof Crevecoeur
This question was solved.
View Solution.

Hello Roelof Crevecoeur,
Scanning is not supported through a Bluetooth connection, only printing is available for such connectivity, You will need a USB in order to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137985&tmp_task=setupCategory&cc=us&dlc=en&lc...
NOTEcan functions are not available through a Bluetooth connection. Scan functions are supported only through a USB connection.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can not find imaqView3D function panel in labwindows/cvi!

Similar Messages

Maybe you are looking for