Can not find migrated files

I did the migration process from my Macbook to new Mac mini, but I cannot find any of the migrated content on the mini. It was supposedly successful more than once. The old macs had the hard drive easilly accessible on the desk top. I tried importing photos from both the backup hard drive (USB) and directly from the MacBook, but the process never ends. I had both firewire and ethernet hooked up between them. The migration assistant never asked which cable I wanted to use. I'm kind of lost at this point. The only really valuable thing I want to transfer is my photo library. I plan to retire the MacBook (It is failing in several ways) when I have the content transferred.

I found this answer in the last few minutes, Thanks so much. I have a follow up question: It looks like I did the migration more than once with different names, thinking the first one had failed. Can I delete users and all of the content associated? I probably used up a lot of space if the users are duplicate files.

Similar Messages

I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful bu tI can not find the files on the mac. Any ideas?

I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful but I can not find the files on the mac. Any ideas?

When you use Migration Assitant it creates another user account and puts your files there. Please log out of your normal account and log into the new account. Had you use Setup Assistant when it asked if you were migrating that would not have occured. You have a couple of options, combine the two accounts (not recommended) or start over, use Setup Assistant and have everything in one user account. Here is a link to Pondin's guide for Lion Setup Assistant tips however if you want to combine the two accounts he has addressed that in
http://pondini.org/OSX/Transfer.html

Help:Can not find the file in jar!

Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)

If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj

Had to uninstall Firefox, now I can't reinstall. Get error message "Can not find archive file." Please help!

I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out of the sessions or restart the computer. After restarting the computer several times and not being able to find any open sessions in task manager, I uninstalled. When trying to reinstall, I get the error message "can not find archive file." I've tried downloading Firefox from cnet as well as the Mozilla site to no avail. Please help. I'm getting tired of using Chrome already!

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

Trying to install iTunes 8.0, can not find script file error

I recently tried to upgrade Win XP for iTunes 8.0, and got the following error msg:
can not find script file “C:\program files\uninstall scripts\quicksilver player 7.4\install.wsf”
HELP!
Tony

Hey Tony, you don't happen to work for a large aerospace company, do you? My guess is that you do, because I work at the same place, and the problem is with our company's distribution of quicktime. email me off list and I'll tell you how to fix it.
bralston at mac dot com

Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".

Recently I'm getting an error dialog box on my T530 when I boot it into my OEM installation of Windows 8. The window title bar is "Windows Script Host", and the error message is:
Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".
I pulled up an old backup, and I do have that file, along with a number of other ones that are missing from that directory. I'm attaching a screenshot of the files that are missing. Not sure why they would have been deleted (I know I didn't do it manually). Should I just restore the file? What about the other ones?
Thanks very much.

I am getting a different VBS script error than the one listed above.
Does anyone know how I can get this file? or recreate it?
I get a similar message saying that it can't find the file c:\programdata\Lenovo-11472.vbs
Also, my wireless just randomly resets - sometimes very few minutes - after I've been using the system for a while. It's brand new and I can't figure out what's going on. Could this be the issue?
When I restart, it stays stable for a while and then starts acting up again.
Thanks for your help!

I by accident deleted an important Note that had all my passwords on my Notes Ap on my Iphone 5. I can not find a file that has deleted Notes files so I can recover it. Any idea how I can get it back? Thanks,Mike

I by accident deleted an important Note that had all my passwords on my Notes Ap on my Iphone 5. I can not find a file that has deleted Notes files so I can recover it. Any idea how I can get it back? Thanks,Mike

Do you have a backup of your iPhone? If so, do a restore and whatever Notes were backed up should reappear.
You will lose any changes made since that backup though.

My itunes are on windows 97. just got windows 7 laptop. when i load new software on my new laptop it shows all my windows 97 music/audiobooks but can not find the files. how do I link them

my itunes are on windows 97. just got windows 7 laptop. when i load new software on my new laptop it shows all my windows 97 music/audiobooks but can not find the files. how do I link them

iDevices are not and have never been backup devices.
Authorizing a computer does not cause media to magically appear.
Media is only where the user puts it.
Copy the ENTIRE iTunes folder from the old computer to the new computer.

Sysprep and Capture Task Sequence Fails "Can not find script file C:\LTIBootstrap.vbs"

I've just installed Windows 8 on a Lenovo ThinkPad T440s using Lenovo's recovery discs. I did not join it to a domain. I logged in as Administrator, navigated to our deployment share, and ran Scripts\LiteTouch.wsf. I selected the new Sysprep and Capture
Task Sequence that I just made, told it to upload to DeploymentShare$\Captures, then started the Task Sequence.
It seemed to run fine until after the first reboot. Windows 8 configured the PC for a while, then displayed an error that it had been shut down unexpectedly. I wasn't sure if this was normal, so I just clicked OK. Then I got an error that said "Can
not find script file C:\LTIBootstrap.vbs". After clicking OK on that, I am brought to the desktop.
The image cannot be found in DeploymentShare$\Captures. Under the Monitoring section of the DeploymentWorkbench, I can see that MDT thinks the Task Sequence is still running on the machine (though it is not), with progress stuck on step 16 of 23: Execute
Sysprep. There are 0 errors and 0 warnings listed.
BDD.log is too long to post all of it, but here's the last few lines in case that's helpful.
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Run Command: C:\windows\SYSTEM32\bcdedit.exe /default {d22e7e91-9ee7-46eb-89d7-c5859e4302f0}]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property BootPE is now = True]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41019 sent: LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
I would greatly appreciate any assistance determining what went wrong and how to correct it. Thank you.

You might get teh c:\LTIBootStrap.vbs error if you are running SysPrep with a unattend.xml template that contains the c:\bootstrap.vbs template, yet you are *NOT* deploying the image with MDT Litetouch, instead just applying the image to the final machine.
Crack open your install.wim file and search for the unattend.xml file in the normal places to see what it is.
I am concerned about the "shut down unexpectedly" error. There should be no shutdown state information left from a captured *.wim file.
If you still need assistance, please feel free to copy the bdd.log file to a public site like OneDrive, and share the link.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

I cannot open Beats Audio. Get a, "Can not find startup file" message

I have an HP Touchsmart 320-1030 desktop w Windows 7 32-bit and cannot open Beats Audio. When I go to control panel and click on the beats icon I get a, "Can not find startup file" message

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
```````````````````````````````````````
If still no resolution, enter BIOS setup by tapping the F10 key immedaitely after powering on the laptop. Reset to Default settings.Usually done by tapping F9 key,check bottom of screen.Svae & Exit.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Dynadock V10 - " error can not find installation file" INSTALL ERROR

Hi I have a toshiba dynadock V10.
Every time i try to install the drivers it says " error can not find installation file". I have downloaded the latest drivers and switched off my anti virus and shut off all running proiceses and no go. There are a few references to this on the internet but none has a solution.
I amn trying to install it on an equium U400 running windows 7.
Funnily enough it loaded on an old dell pc easily!
I have spent hours searching the net and there is no answer. I dont have anything showing in programs to uninstall.
Thanks

>Funnily enough it loaded on an old pc easily!
Hi
This means that drivers are ok and there must be something wrong with the system preinstalled on Equium U400.
How did you proceed?
Its important that you would NOT connect the Dynadock to the notebook before the drivers and software installation has not been finished.
Therefore you have to install the software firstly. Then after new reboot connect the Dynadock to the notebook and the installation would finish the next steps.

Keep getting can not find %appdata% file when trying to download itunes. do you know of a fix?

Have HP600PC with Windows 7 64-bit. Keep getting Can not find %APPDATA% file when I try to download Itunes and other software. Do you know of a fix?

Here you go, this should do it.
http://support.microsoft.com/kb/2258121

Downloaded aquarium screen saver. Says can not find Resource file

Downloaded Auaruim screen saver, installed it, but can not find Resource File.

>Funnily enough it loaded on an old pc easily!
Hi
This means that drivers are ok and there must be something wrong with the system preinstalled on Equium U400.
How did you proceed?
Its important that you would NOT connect the Dynadock to the notebook before the drivers and software installation has not been finished.
Therefore you have to install the software firstly. Then after new reboot connect the Dynadock to the notebook and the installation would finish the next steps.

Photoshop Bridge can not find Iphoto files

When I open Bridge in Photoshop to open pictures It can not find my Iphoto files. There is an Iphoto icon with the other folders but when I click on it it opens Iphoto it does not show the files.

Bridge and iPhoto do pretty much the same thing in different ways and can not be used together - choose one or the other
PS can be used with iPhoto directly without bridge - set it as the external editor in the iPhoto preferences
LN

Can not find migrated files

Similar Messages

Maybe you are looking for