Can not find solaris 64 9.0.1.5 patch for repository installation

Hi,
I found in oracle10gAS installation guide that I need to apply patch 9.0.1.5 or later in order to use an existing oracle 9 database for my repository. The problem is that I can not find oracle db 9.0.1.5 patch for solaris 64bit. The latest patch for solaris 64 is 9.0.1.4. Does anyone know if I can use the 9.0.1.4 patch or where I can find 9.0.1.5?
9.0.1.5 only exists for solaris 32 versions.
Thanks

Hi giorgio santandrea,
I am also facing the same error, could please tell me how you resolved that error?
Thanks & regards,
Manpreet Johal

Similar Messages

I can not find a Flash version of the BIOS for HP Pavilion tx1320er.

Good day!
I can not find a Flash version of the BIOS for HP Pavilion tx1320er.
I can not start the laptop black screen at startup, all the LEDs are lit, read this bill is that it is written bios. The battery dropped does not help, when you turn to pressed keys windows laptop B responds uttering a sound. but I have no USB BIOS version, so just to be sure of the death of my laptop.
P.S. I write a google transleyt sorry for the errors of translation.

Hello,
What does "I tried the apt version of which doesn't download," mean? Are you trying to download from get.adobe.com/flashplayer or from Ubuntu's Update Manager?
BTW, I deleted your other thread. Posting the same topic in multiple threads doesn't help your issue get answered quicker and does lead to confusion in responding to two different threads.
Maria

Wher can I find the 8.1.7.2 patch for the Sun OS 5.8

I need to find the patch for the Oracle 8.1.7.0 to take it to 8.1.7.2 and it is running on Sun Solaris 5.8. I have looked through the Oracle site but haven't found anything that looks viable.
Thanks
Ted

Which Oracle site did you try? As far as I know the only place you can get the patches is through Oracle's Metalink( metalink.oracle.com ).
I need to find the patch for the Oracle 8.1.7.0 to take it to 8.1.7.2 and it is running on Sun Solaris 5.8. I have looked through the Oracle site but haven't found anything that looks viable.
Thanks
Ted

Setup can not find a supported product...*I SERIOUSLY NEED HELP* SB-XFI

WinXp System
I've posted here before and no ones been able to help me with a solution..but this problem keeps occuring when I restart randomly when I get back to windows there will be no sound.
Here's the procedure I follow which works (randomly) after 2 or 3 hours of doing this over & over & over & over again..
Upon the sound not working I..
1: Add/Remove programs-uninstall creative drivers
2: Launch Driver sweeper (Guru3d) select Creative-Sound..****yse. Remove any entrys it finds.
3: Open the setup for the SBXFI drivers (the ONLY one that will work for me) .0.0. Created /30/2009
then Driver Uninstallation> Delete all shared Creative Audio Driver files
4: restart and clean boot back into windows.
5: I re-open that driver setup file and do -Driver Installation. Now most of the time it will run..wait a little bit then tell me to restart. This means it WILL NOT WORK. I know when its gonna work because it will pop up a windows caution box saying that the driver is unsigned and do I wanna continue.. I click yes and thats a sign it'll work..but that only happens after HOURS of doing this procedure..if Im lucky.
Tonight Im on hour 2 of this rubbish and Im absolutely sick of it..can someone provide a fool proof way to make these **bleep** drivers work?!? I've tried to run almost all the other drivers out there and if I attempt that I get the "Setup can not find a supported product..." for some reason this driver Im using is the only one that works..sometimes..
Message Edited by Wildone_06 on 05-06-2009 0:0 PM

Thanks, its [size="" face="Arial">Sound Blaster? X-Fi? XtremeMusic.
I got it working again around 0pm last night, after doing that procedure since 7pm. Now if its the wrong driver, it would never work..if its the right driver..it should work first time. So I have no idea why I have do this ritual and it'll eventually work after so many trys..is this software vodoo based or something!?
The OEM drivers that came with it certainly dont work (The 'setup can not find ect ect) so its a mystery to me.

Libocijdbc8.so can not find

I have installed Oracle 8.1.5.0.1 Server in Redhad Linux 6.1 and trying to use JDBC by compiling and executing some of the Oracle provided samples. During execution it can not find libocijdbc8.so file . It looks like this file is not in the specified directories or no where to be found. I am executing this from the same PC where Oracle server is installed. And the documentation mentions this file for solaris. And also I have applied the linux815 patches. And also i am new to Oracle.
Please let me know where i can find this driver
Thanks
Naidu

look in $ORACLE_HOME/lib it should be there. If its not there then probably you didnt install the jdbc drivers.

I have reinstalled snow leopard 10.6.8 and want to restore my i photos from time machine. can not find iphoto libary in time machine, can"t not find home-pict. iphoto lib. in time machine

i have reinstalled snow leopard 10.6.8, and want to restore my i photos from time machine. Can not find i-photo libary in time machine, can't not find > home-pict. iphoto lib. in time machine. Please help.

On my HD it does not say ,restore, in yourname -pict. Iphoto lib.,
On the time machine, it , yourname etc, oes not show up at all.
Only right side of TM, your name etc. does not show.

Help:Can not find the file in jar!

Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)

If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj

I can not find the messages in sxmb_moni in http to rfc scenarion

hi i'm using http client tool when i send the message its working fine i'm getting the response, but i can not find that message in sxmb_moni in http to rfc scenario
can anyone help me

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

Can not find "Work Folder" in windows server standard edition

Guys, I have a testing lab and all is working with the exception of the fact that I can not find "work Folder" to install it. I'm using windows server 2012 standard evaluation copy edition. Normally work folder should be under >file
and storage service>file and iSCSI services. However, it is not there. Can someone help please
staphisco

Hi,
From the overview, Work Folder is not supported in Windows Server 2012 (only Windows Server 2012 R2).
Work Folders Overview
http://technet.microsoft.com/en-us/library/dn265974.aspx
Software requirements
Work Folders has the following software requirements for file servers and your network infrastructure:
A server running Windows Server 2012 R2 for hosting sync shares with user files
If you have any feedback on our support, please send to [email protected]

Can not find a library in Aperture after upgrading to Mavericks?

I upgraded my Aperture to 3.5 on Mavericks. Since I have updated my Aperture, I cannot open my second Library "Aperture Library"
This is what it happens:
I can not find my "Aperture Library" photos, and when I try to switch between the library (File>Switch Libaries>"Aperture Library" this comes up:
When I click on relaunch:Then when I click on "Aperture Library" and press chose, a 3 second process occurs and Aperture returns back to where it was when it was opened. The "Aperture Library" doesn't appear anywhere.
When I go to Altinoz (My Mac) > Pictures > Aperture Library:
When I try to open the Aperture Library folder in My Mac > Pictures > Aperture Library
Do you want to import this library to Aperture (which was already in the old verison of Aperture)
An error comes up:
The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture 3 and try again.
I would really appreciate your help on helping me find "Aperture Library" Photos I have, since the upgrading to Mavericks really made annoying problems to me.

It seems to me that you need Aperture 3.2.4 to open your library.
If you have it then do the following:
Uninstall Aperture 3.5
Install Aperture 3.2.4
Start Aperture and verify that you can access your library
Update to Aperture 3.4.5
Start Aperture and verify that you can access your library
At the end update to Aperture 3.5 and upgrade your library
If you don't have the older versions, maybe try to open the library in iPhoto. Does that work?

Can not find some messages in Mail using search

I have some problems with Mail.app I can not find some messages in Mail using search, the strange thing is that sometimes mail search finds some messages, but after rebuilding spotlight index the search displays other messages with the all messages searched using same search criteria. I have also tried to delete Envelope index file from the Mail folder in usr/library and forced mail to import all mailboxes but it started to crash importing some of mailboxes - I deleted the messages from that mailboxes, imported remaining mailboxes and tried to rebuild mailbox, but everything without a successes. Any ideas how to solve it?

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol. My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this. Any idea how it can be fixed???

The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
Any idea how it can be fixed??????

Hello,
You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy. There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player? Not knowing the model of the Sony it is hard to investigate.
And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
JT

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

How can I use iCloud-keychain if i can not find my country in the country code list?

How can I use iCloud-keychain if i can not find my country in the country code list?

Welcome to the Apple Community.
If your country code does not appear in the list…
Go to System Preferences > iCloud > Keychain and enter your Apple ID password (Settings > iCloud > Keychain, from a mobile device)
Select the ‘Create Different Code’ option. (Mobile devices only)
Select the advanced option and choose whether to create a random code or no code, selecting the later allows syncing across devices but not with Apple’s servers.

Can not find data in virtual cube

Experts,
I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
Can anybody tell me what could be the reasons the data is coming through Virtua cube.
Thanks,
AK

Hi,
i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
regards
Siggi

Can not find solaris 64 9.0.1.5 patch for repository installation

Similar Messages

Maybe you are looking for