Can not get analog input with SCC-SG04

I have used the wizard and wrote a simple AI input channel loop with a digital readout. The voltage doesn't change.

Well, I guess I'm not sure what all you have tried or how you have things set or configured. I would first try verifying the input through the test panels in MAX. Make sure you have your DAQ card set to NRSE mode, make sure you have your SC termination equipment set as the "Accessory" to the DAQ card under it's properties, double check your connections, then see if you can read the voltage through the MAX test panels. After you can read the voltage there, then you can try using a program. I hope this helps!
Russell

Similar Messages

HT201303 How do I get my security passwords I have forgotten them and can not get envy thing with out them

How do I get my security passwords I have forgotten them and can not get envy thing with out them

Fastest way is by contatcing support. This is because youc an't reset the questions on your end if you forgot the original answers.
https://expresslane.apple.com/
Follow these steps:
All Products and Services > iTunes > iTunes Store > Account Management > iTunes Store account security
Answer the questions and if required sign in with your Apple ID and password - same one you used to log in on this support forum.
You will find an option to send an email to Apple on that page. Indicate that you forgot the answers to your security questions and wait for iTunes support to reply.

How do i remove the Icloud Lock on a Iphone thats Clean and can not get in touch with the oraganal owner

How do i remove the Icloud Lock on a Iphone that's Clean and can not get in touch with the oraganal owner
thers no you cant put a reset tool on your site to reset phones thats not stolen or in lost mode

it's an anti-theft measure DAH Its Not Stolen SO what the crap Then. I wish thay would Remove it From there Ios and Redo it so it Only Locke if you Report it Stolen or enter Lost Mode. BC thers A lot of PPL that abuse it.

My iphone can not get in touch with the server. What can I do?

My Iphone can not get in touch with the server, when I am trying to accept terms and conditions. What can I do?

Possible causes:
1. Your antivirus is blocking access to gs.apple.com.
2. Your phone is jailbroken.
3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
4. Apple's activation servers are down (very rare, and never for more than an hour or so).
For 1. try disabling your antivirus.
For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.

HT201441 i found an iphone and i can not get in touch with the owner, and i am trying to unlouck it so i can contect the owner, so i can give it to him. what should i do?

i found an iphone and i can not get in touch with the owner, and i am trying to unlouck it so i can contect the owner, so i can give it to him. what should i do?

You will NOT be able to Unlock it.
nasdee wrote:
i found an iphone ... what should i do?
Hand it in to the Police or the Lost and Found / Security Desk of where you found it.

Can not get on-lin with pppoe

i've set up ax with both admin utility and setup asst. to use pppoe... i still can not get on-line... it keeps looking for pppoe...
there is no place to input a password for the pppoe account. wondering if this is the cause of no connection to the internet...
mac's networking is set to airport using dhcp...
is this the right set up?
thanks,
henry
G5 1.8 DP, G4 1.25 DP, ibook g4 Mac OS X (10.4.5)

http://discussions.apple.com/thread.jspa?messageID=1117692&#1117692
henry b wrote -
"To check the PPPoE settings on the Airport Express, run the Airport Admin Utility. The default admin password is the word "public" without the quotes. Look under the Internet tab - it should show "connect using PPP over ethernet", and there will be a place to enter your internet account user name and password. "
after the account name input there is button "Change password..." is this account passward function or is this the ax password change function... a little bit confusing.
still not working will try turning everything off for the 20th time...

Can not get on line with new notebook

can not get on line. *we have verizon, *bought new router to see if that was problem. *bought airport express to see if that would help, *my son, bs in computer security, has spent days starting over redoing, *we used his dell notebook to go to apple site (what's wrong with that picture?) it did work for awhile, wanted me to start time machine, but would go on line thru safari? says ethernet cables not connected - he tried 2 different ones. i'm at the point of taking this piece of #$@% back to best buy.

Whoa, slow down. It's hard to understand exactly what's going on when you've explained your issue so unclearly.
Please describe exactly what network setup you have at the moment - you have Verizon DSL? What router are you using, are you wired or wireless, how is the Macbook connected to the network, how are your other computer(s) connected to the network? Let's take it step by step and I'm sure we can find out what's going on.
Matt

I can not read Analog input (a square wave)

I am programming with Labview 7.1 on FPGA. The hardware is PCI7831. With CB-68LP connector, I connect analog input (a square wave generator) to AI0+(68) and AIGND0(67). I try to read it with waveform chart. But I can't get a square wave on the screen. I did check the square wave generator's output. It is correct. The connector CB-68LP connected with PCI7831 on analog port.
I am runing the program on emulation, not on real FPGA.
Thanks

Signal generator I used is 3010 function generator for BK precision. It is an old instrument. I probed output signal from this generator on oscilloscope with signal generator output conected to oscilloscope probe (+) and signal generator ground to probe (groud). It is a square wave.
I suspect the teminal I used for I/O port to PCI7831. Because my coworkers installed the hardware for me, he is absent recently. The terminal is CB-68LP from NI with numbers ( 1 to 68) to specify each connector on it. And I got a SCB-68 Quick Reference Label sheet on my desk to specify numbers correspanding I/O port (for example, 68 -- AI0+). I suspect if this SCB-68 Quick Reference Label sheet matches the terminal CB-68LP?
I will talk to my coworkers next week.
jason

Black screen - can not get in touch with my Ipod Nano

I have an Ipod Nano, latest model. After a short time the monitor shuts down and turns black / standby, can ths be disable?
I use my Nano with the Nike Ipod censor when I run, and it is diffical to get in touch with my Ipod Nano, when the screen after a short time have been black.
Should I see my runningdata or to stop the censor when I'm finishs running, and press the screen nothing happens.
Press I on / off button, so either I get a voice that tells a lot about my run, or push me 2 times on / off button toggles track.
If I press the + or -, I change the volume.
Keeps press on / off button, turn off my Ipod Nano and all my recording of my run is lost ...

Possible causes:
1. Your antivirus is blocking access to gs.apple.com.
2. Your phone is jailbroken.
3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
4. Apple's activation servers are down (very rare, and never for more than an hour or so).
For 1. try disabling your antivirus.
For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.

I can NOT get on Line with Firefox at all, just IE

my computer can get on line with no problen on internet explorer but firefox will not work at all. I have restored the computer & deleated firefox and reloaded it 2 times still No Good. I keep getting the message sauing it can not connect to firefox. please help, thanks, DanO'

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
* http://kb.mozillazine.org/Lost_bookmarks

Can NOT get expected result with Locale.getDisplayName

There is a brief testing code as below:
Locale defaultLocale = new java.util.Locale("en", "US"); //L1
Locale displayLocale = new java.util.Locale("iw", "IL"); //L2
System.out.println(defaultLocale.getDisplayName()); //L3
System.out.println(defaultLocale.getDisplayName(displayLocale)); //L4
System.out.println(defaultLocale.getDisplayName(Locale.US)); //L5
I construct an en_US locale and want to get its display name in iw_IL(Hebrew) locale, but English display name appears.
I do this try in JDK 1.6.0_17 and I think it may be not supported by Hebrew locale util this version of JDK.
Who can tell me if there is another way to solve my problem?
Thanks

I try this testing code with Greek locale.
Locale defaultLocale = new java.util.Locale("en", "US"); //L1
Locale displayLocale = new java.util.Locale("el", "GR"); //L2_
System.out.println(defaultLocale.getDisplayName()); //L3
System.out.println(defaultLocale.getDisplayName(displayLocale)); //L4
System.out.println(defaultLocale.getDisplayName(Locale.US)); //L5
It shows expected locale name but I don't find any el_GR related files in lib\ext\localedata.jar.
I think maybe I still not find the correct locale supported files.
Could you please tell me where can I find how many locales are avilable in my JRE?
Edited by: Justin.Jiang on Nov 11, 2009 6:44 PM
Edited by: Justin.Jiang on Nov 11, 2009 6:44 PM
Edited by: Justin.Jiang on Nov 11, 2009 6:45 PM
Edited by: Justin.Jiang on Nov 11, 2009 6:45 PM

Flex 4 - Can not get ADG working

Hello,
I have just downloaded flex 4 SDK (flex_sdk_4.0.0.14159_mpl) and Flash Builder 4.
I have created a test prroject and can not get it working with Advanced Data Grids.
Here is my set up: Created Project called Test, this contains one MXML file that contains an Advanced Data Grid:
<fx:Script>
        <![CDATA[
            import mx.collections.HierarchicalData;
            [Bindable] private var _test:HierarchicalData;
        ]]>
</fx:Script>
<mx:AdvancedDataGrid id="test" dataProvider="{_test}">
   <mx:columns>
       <mx:AdvancedDataGridColumn headerText="COL_A" />
       <mx:AdvancedDataGridColumn headerText="COL_B" />
       <mx:AdvancedDataGridColumn headerText="COL_C" />
    </mx:columns>
</mx:AdvancedDataGrid>
This works Okay. I then include a libary into the project, the libary, also built with the same SDK, contains a class that contains nothing but one single method that does nothing:
<mx:Canvas xmlns:fx="http://ns.adobe.com/mxml/2009"
           xmlns:s="library://ns.adobe.com/flex/spark"
           xmlns:mx="library://ns.adobe.com/flex/mx"
           width="100%" height="100%">
    <fx:Script>
        <![CDATA[
            import mx.controls.advancedDataGridClasses.AdvancedDataGridColumn;
            private function test(col:AdvancedDataGridColumn):void { }
        ]]>
    </fx:Script>
</mx:Canvas>
Launcing now causes the error
TypeError: Error #1007: Instantiation attempted on a non-constructor.
    at mx.controls::AdvancedDataGridBaseEx/getSeparator()[E:\dev\4.0.0\frameworks\projects\datav isualization\src\mx\controls\AdvancedDataGridBaseEx.as:4618]
    at mx.controls::AdvancedDataGridBaseEx/createHeaderSeparators()[E:\dev\4.0.0\frameworks\proj ects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4660]
    at mx.controls::AdvancedDataGrid/createHeaderSeparators()[E:\dev\4.0.0\frameworks\projects\d atavisualization\src\mx\controls\AdvancedDataGrid.as:2428]
    at mx.controls::AdvancedDataGridBaseEx/drawSeparators()[E:\dev\4.0.0\frameworks\projects\dat avisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4574]
    at mx.controls::AdvancedDataGridBaseEx/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\ datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:2119]
    at mx.controls::AdvancedDataGrid/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\datavi sualization\src\mx\controls\AdvancedDataGrid.as:2899]
    at mx.controls.listClasses::AdvancedListBase/validateDisplayList()[E:\dev\4.0.0\frameworks\p rojects\datavisualization\src\mx\controls\listClasses\AdvancedListBase.as:3468]
    at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.0.0\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:663]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:718]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.0.0\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1072]
Removing the method in the libary project alivates the problem. But I can not see why this is a problem in the first place!!??!?!?!?!?!?!?
Can anyone help. this is really weird.

I'm getting the same error. This is due to a bug in AdvancedDataGridBaseEx. The offending code is:
            var headerSeparatorClass:Class =
                getStyle("headerSeparatorSkin");
            sepSkin = new headerSeparatorClass();
if getStyle returns null then you will be trying to instantiate headerSeparatorClass is going to cause the "Instantiation attempted on a non-constructor" error.
Apparently someone thought that the headerSeparatorSkin would never be null.

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

Can not get CF7 to Communicate with DB2 v9.1

Installed on a windows server I have DB2 UDB Enterprise
edition 9.01, all the fix packs are current.
I also loaded ColdFusion MX7.02 Enterprise edition on the
same server. I had to download the latest JDBC Drivers from Adobe.
I let db2 create the DSN connections in the file system panel
one Local connection and one TCP/IP both connections passed the
connection test. Db2 also passed the connections test. I tested
each connection separately deleting one before creating the other.
When I get to coldfusions connection data sources panel and
create either connection I get a “ time out” message
from the server when I test the connection.
This morning I installed IIS on the server and now I am
getting a new message below.
I do know that the connections are set up right and the
authorities are correct. If I change any of the parameter either in
db2 or coldfusion it knows that they are incorrect (i.e. password,
user id, db name, server etc.)
I set up oracle and ASP in about 3 hours. Its been 3 weeks
since we purchased Coldfusion and I still can not get Coldfusion
and DB2 working together
Any help would be greatly appreciated
Connection verification failed for data source: TOOLSDB
java.sql.SQLException: [Macromedia][DB2 JDBC Driver]Resource
Limits Reached( ALLOCATE MEMORY FOR NEW SQLSTT FAILED ). Diagnostic
Info: FUNCTION ID = 0049 , PROBE POINT = 0400 , TRACE POINT = 0030
, SUBCODE1 = 8B0F0000, SUBCODE2 = 78A68A98, SUBCODE3 = 00000000,
ERROR MSG = Parser: Memory allocation error.
The root cause was that: java.sql.SQLException:
[Macromedia][DB2 JDBC Driver]Resource Limits Reached( ALLOCATE
MEMORY FOR NEW SQLSTT FAILED ). Diagnostic Info: FUNCTION ID = 0049
, PROBE POINT = 0400 , TRACE POINT = 0030 , SUBCODE1 = 8B0F0000,
SUBCODE2 = 78A68A98, SUBCODE3 = 00000000, ERROR MSG = Parser:
Memory allocation error.
Thanks bob

the only thing i can think of right now is to remove the pc suite, reinstall it, reboot your pc and see if the same problem presists
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

Can not get analog input with SCC-SG04

Similar Messages

Maybe you are looking for