Can not get back into my bios side. PN is 470040-148 Compaq Evo N410C.
PN is 470040-148 Compaq Evo N410C. On the bios side I changed my boot options and device options to boot off the cd-rom only because on lost my password. a friend mailed me a password finder cd which I used in my external cd-rom. I now can get into windows but only by hitting ctrl&delete. I hit the f10 key when prompted but nothing happens. I hit f2 to change the language and nothing happens is there an option other than these that will allow me to get to the bios side please help I'm trying to get the laptop ready for my young daughter.
I think I diabled my hard drive as well!!
Malkymder wrote:
Glad to hear it is a step forward ...
can you try with another Display manager like lightdm see if that works ?
I might try that, though now that I finally have my PC back I have some other work that takes priority for a few days. :-)
Malkymder wrote:And yes xorg.conf should be replaced with /etc/xorg.conf.d/20-nvidia.conf instead
I'm using `nvidia-xconfig` to generate that file (I haven't had to tinker with it manually for years now).
The tool generates this 'deprecated' file. Should I just move its exact content to the new location?
Similar Messages
-
I can not reset my resolution back to 1080p after clicking on 780 by mistake. My laptop will not go back to reolutions?
Have you tried restarting and then try to change it again?
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?
Hi Jeffny01,
If your iPhone is not responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Regards,
- Brenden -
How can I get back into my application aftermath invoking Start up page of index.htm ?
Gorgeous Hello All,
If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
A hurdle :-
I have a application which has been developed in ASP .NET, Version 4.0. Help link has been created in this application wherein here the Start up page of index.htm has been linked to be read from the RoboHelp local project folder\!SSL!\Multiscreen_HTML5\desktop. All are working absolutely fine except when
I login into the above-said application -> click on the Help page -> the index.htm opens with Contents, Index, Glossary -> Am able to successfully perform any task by respective clickings
-> But I am not able to get back into my application when I click on the IE provided Back button (Alt+Left) -> Any amount of invoking Back button makes the system getting looped into this Start up page of index.htm only -> When I Close Tab (Ctrl + W) or Close ( X ) -> The window session gets closed and I have to repeat all by relogin once again.
How can I get back into my application aftermath invoking Start up page of index.htm ?
(I can always get back into the application easily by erasing those parts in the url which refers to this RoboHelp linkages – but this certainly looks non-polished work)
Help Please
Cheese – Vipin Nambiar, BangaloreHey Jeff, I used Internet Explorer 10.0.9200 and Google Chrome 26.0.1410. Alas - it is the same behavior.
(But Jeff : When I used Microsoft HTML Help as primary layout to generate chm file , My Help when launched from my Application opened in a new browser window and when I closed this Help browser window did not close my application. Looks like need to write few liner code to get this issue settled )
Thanks Indeed of lots for your concerns Jeff !!! -
Help! My daughter changed the password on her iPhone and she can't remember it. How can she get back into it. Restoring is not an option so I'm hopeful there is another way. Thanks!
Hey KimmyP123,
Thanks for the question. I understand your daughter has an unknown passcode on her iPhone. The following article provides a few solutions for this situation:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
I notice you are looking for solutions other than restoring, the article does outline how you can use iCloud's Find My iPhone:
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Thanks,
Matt M. -
How can I get back into my iPod when I forgot my combination?
I set a combination lock on my iPod nano (3rd generation). Next time I tried to unlock my iPod, I realized I forgot my combo...How can I get back into my iPod? I appreciate any help you have to offer. Thank you!
If you do not know the passcode, then your only option is to restore the iPod to factory settings via iTunes.
B-rock -
My son forgot his passcode and the answers to the security questios and itunes information has been lost. How can i get back into his itouch?
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For security questions
From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.
Return, cancel, or exchange an Adobe order
-
I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you. (iPhone 4s)
Well, you're gonna have to recover the password for that Apple ID:
http://support.apple.com/kb/ht5787 -
How can i get back into my disabled ipod
how can i get back into my disabled ipod
Disabled? You got locked out of the passcode on the lockscreen? If so, you need to put the ipod in recovery mode and restore. Here is a guide: http://support.apple.com/kb/HT1808
-
I forrgot my password on my ipod touch can not get back on
I forgot my password on my ipod touch can not get back on help
Place the iPod in recoverymode and restore it via iTunes on your comoputer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
You could have easily found this by search this forum since the question gets asked/answered at least a dozen times a day. I just answered it four times in the last 1/2 hour. -
I just finished using iTunes, closed out and then tried to get ack in. Got this message "The iTunes library .9tl file is locked, on a locked disk, or you do not have write permission for this file." How can I get back ino iTunes ?
I actually figured it out...I had to go to the iTunes Library Extras.itdb file and give myself permission to have full control. THEN, I could go and estore a previos version. Once I had done this, I got the same message for iTunes Library Genius.itdb . . . I did the same thing with it and Voila'!!
Hope this helps...
SVT -
I installed windows 8 using boot camp assistance. I finished and it looks like windows installed successfully. When I search for boot camp. It doesn't find it. When I restart the computer it comes up in windows. How do i get back to the apple side?
You did made a backup before you started all of this with BootCamp, didn't you?
One missed step with BootCamp and the whole Mac side of things can disappear.
I thought a Recovery boot and Disk Utility would be the quickest way to find out what you did.
Allan -
wow, this is taking forever to communicate with anyone, I just want my $4.99 back from the movie rental I paid for. I paid for a rental, we were watching it, had to pause it, accidentally hit 'menu' on the apple remote, tried to get back into the movie, wouldn't let us, apple said ' go to settings, click downloads, select the rented movie from there',( not really a quote, but, close enough). So, we went to 'Settings' on main menu, but, there is no 'downloads' icon....I guess it is true: Do Not Rent from Apple TV'.
FionaWelcome to the Apple Community.
You are looking at outdated instructions, you can find the "check the downloads" option under settings > iTunes Store. You may also wish to look on the movies > rentals. -
Can't get back into os x after os 9 boot.
I've never booted into os 9 on my old imac g3, so I decided to try it. After i selected os 9 as the startup disk and restarted, it showed up as a floppy disk with a question mark installed. I guessed something isn't installed right. I don't really care about os 9 now, i'm just trying to get back into os 10.4 tiger. I've tried holding the option key during restart, and it only shows a refresh button, macintosh hd in the middle, and an arrow pointing toward the right. The refresh doesn't do anything, and the arrow takes me back to the floppy disk with the question mark. Can anybody help me boot back into os x??? Thanks.
-AaronSometimes you can call Apple and get replacemebt disks reasonably with your Serial# handy!
Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED *** Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
Maybe you are looking for
-
Can I transfer music from my galaxy s5 to my ipod nano
Can I transfer music from my galaxy S5 to my ipod nana?
-
Draft message saved has disappeared - can't be found!
This is driving me insane!! I just wrote a LONG and really imporant message in Mail. Saved it with a title but no recipient. When I was done, I saved and closed the message. Now the message can't be found!! It's not Mail app, search yields nothing, i
-
How to generate report in pdf format through a JSP page
I require to generate my report from my JSP page into a PDF format . How can i do it?
-
Best program to create projects in the CMYK profile?
I create advertisements for a local business and need a program that I can create in the CMYK profile for the newspaper. All I currently own is the photoshop elements 7 program which does not have this feature. Besides the new CC program, which would
-
Problem in language settings for Conversion of "." [dot] to "," [comma]
Hi Experts, We have a requirement to change the default decimal notation from one user language to other user language. For instance the decimal notation for Dutch language is ","[comma] , we need to change this notation to "."[dot].