Can not get into the console on a CVPN 3005 - any ideas please...

No matter what cables I try, I can not get into a 3005 CVPN - any ideas of what connectors I need?
Thank you

you need a straight through serial connection.
you can use a regular straight through patch cable and with the db9 terminal adapters on both ends from cisco.
the blue roll over cables don't work with these.

Similar Messages

  • HT4759 Please I need a help I cannot backup my ipad and can not get into the icloud storage.  What would I do to get into my ipad?  please I need your help

    Please I need a help.  I cannot backup my ipad and can not get into the iclous storage to delet them, because its read icloud storage is full.  Please do you have a knowledge of how I can get rid of the message and get into the ipad?

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

  • I can not get into the iTunes store for the past two days.  I can do a search on the music in upper right corner.  However, the screen is white with "iTunes" in the middle when I do. Any suggestions?  Thank you.

    I can not get into the iTunes store for the past two days.  I can do a search on the music in upper right corner and get a drop down list.  However, the screen is then white with "iTunes" in the middle. Any suggestions?  Thank you.

    Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    If your computer has one of the LSPs listed you may have to reset winsock.
    If not, you may want to give this article a shot -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • I can not send messages because the server is wrong. but I also can not get into the server configurations

    Hello there
    I can not send e-mails because the server configurations are wrong, but I can not get into the configurations by the normal way

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try a Reset - iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    Or this - Delete the account in Mail and then set it up again.
     Cheers, Tom

  • Can not use all the tools in my drawing markups any ideas on getting them to work?

    Can not use all the tools in my drawing markups any ideas on getting them to work?

    Hi tonys60181,
    Could you please let me know what version of Adobe Acrobat are you using.
    What all drawing tools are you unable to access?
    Is this issue specific to one PDF file or all?
    What exactly happens when you try to use any drawing markup?
    Please let me know.
    Regards,
    Anubha

  • I have my home wifi working ok, full signal, wifi switched on, on my iPad, but I can not go on the Internet, message, FaceTime, etc. Any thoughts please ???

    I have my home wifi working ok, full signal, wifi switched on, on my iPad, but I can not go on the Internet, message, FaceTime, etc. Any thoughts please ???

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT201413 hi i can not get into the istore i get a network error but i can get to other websites and i checked my ie settings

    I am running 64bit version - can not get into istore but can get to other web sites. i have checked my settings i nIE

    Hello trobrie
    Start with the article below, it will provide multiple troubleshooting options as well as a link with more advanced troubleshooting steps.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    -Norm G.

  • I updated I Photos and now I can not get into the I Photos,   I get a message that  says "the library needs to be updated to work with this version of I Photo'  I have no other updates to install.  How do I update to get into i Phones?   riderm622

    I updated my computer with the  I Photo June 2012 program and now I can not open I photo or shut off the computer because I get a message that says "The library needs to be updated to work with this version of I Photo'   I have no other updates to install.  How do I update the library to get into I phootos.  riderm622

    backup your iPhoto library and download the 9.1 update and install it
    LN

  • HT3887 I turned my blue tooth off now I can not get into the computer

    I have a wireless keyboard and I turned off the blue tooth so now the computer is asking me for the pass code but I can not type it in because the Bluetooth is off

    Log into iCloud.com and turn remove the device from the account.

  • I have downloaded over 100 books from apple on my I Pad1. Now I can not get into the store because the iBook stops working

    I buy books to read when I need quiet time but it seem that the I Book store is not working and every time I try it shuts itself down, maybe apple might know what is wrong with this app or I will have to stop trying to buy books and go to Amazon for my books.i have over a hundred books and I like to buy books when I see a book in stores and like to download them to my I Pad which goes with me everywhere. Can someone fix this problem or I will have to get a Nexsus 10 and a kindle fire for my books.
    I have already written in and got someone named Amanda but no help also got a number *******if that means anything?
    Thanks,
    RJB
    <Edited By Host>

    Since you didn't really provide specific details as to exactly what is happening with the iBooks app, you can go thought these troubleshooting steps and see if any of them work for you.
    iOS: Troubleshooting applications purchased from the App Store
    Sometimes it is as simple as restarting your iPad or closing the app and rebooting/resetting the iPad. If nothing works from the troubleshooting article, post back with some details.

  • I had to chANGE OUT COMPUTERS AND MY IPOD IS TO MY OLD LIBRARY. hOW CAN I DELETE THE OLD LIBRARY/IPOD ATTACHED TO IT. I CAN NOT GET INTO THE OLD LIBRARY.

    I had to change out computers due to microsoft xp. How can i move my songs off my ipad to the new itunes on my new computer? It tells me that my ipod is assigned to my old computer/itunes library.

    Copy the ENTIRE iTunes folder from the old computer to the new computer.

  • TS1424 is it just me that can't get into the store

    is it just me that can not get into the store

    You're not the only one some European countries (UK, Poland, Austria, Belgium, Germany < these are the countries that have confirmed they are having this problem) are having the same problem. This discussion is also highlighting the same problems you are having:
    https://discussions.apple.com/message/22845142#22845142
    I can confirm that the homepage and the music section in the iTunes store are experiencing this problem.

  • Hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen

    hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
    regards,
    v.s.bharan

    Welcome to Apple Discussions!
    Do you keep your data backed up?
    If not, you should always do so*:
    http://www.macmaps.com/backup.html
    You never know when a hard drive or a directory might go bad.  Having a bootable clone is a must.
    That link also shows you some tools you can use to recover data.
    If you aren't backed up, try buying those tools first, before attempting to repair the directory.
    Directory issues can be fixed with these tools*:
    http://www.macmaps.com/directoryfaq.html

  • I updated from windows xp to windows 7 and can not get into my itunes account.  I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one.  How do I get to my itunes?

    I updated from windows xp to windows 7 and can not get into my itunes account.  I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one.  How do I get to my itunes?

    Take a look at Apple's document for authorizations -> iTunes Store: About authorization and deauthorization.
    You can deauthorize all computers from iTunes. All you have to do is click iTunes Store, click your account name in the upper right corner of iTunes, then deauthorize all.

  • I need to get into my old account and get my addresses and then cancel the old account but can not get into it. Had to change my user name when I moved and now I can't get into Firefox. Can't remember the old password. What to do??

    I moved during the summer. I changed to highspeedand & when I set my computer up it told me that my email address was already in use so I had to change it(????) I changed from jkady to [email protected] I tried to change it on firefox but it would not except the new name and I could not get into my old account.I need all my addresses and would like to cancel the old account but I can not get into it. This is very frustrating!!!!! I need my addresses!!!!!!!!

    I logged in changed the primary E-Mail address to a different one, vertified it then tried to log in it said either to send an E-Mail to veritify again or to do my security questions, so I choose to do the security questions and put in my Birthday like it asked and it said that it was wrong and I had to authenticate it to get in, why is it so hard to just set up a Apple ID really though!
    So I tried the E-Mail to and it has not sent me an E-Mail then I tried to log in again and it has locked me out of my account so I try to recover my password and it gave me the same options to get my password back and both options are doing the same as before, it says I don't know my on birth date or it is wrong or needs authenticate it, then the E-Mail doesn't come through!
    This is just stupid now.

Maybe you are looking for

  • Error while starting manager in SuccessionPlanning application

    Hello! I've got that error while launch SuccessionPlanning Manager Application: Server Error in '/SuccessionPlanning' Application. 'column' argument cannot be null. Parameter name: column Description: An unhandled exception occurred during the execut

  • Media Encoder PCM or Dolby Digital Settings change preset????

    I am about to Encode a 2 and a half hour project from PPRO 5.5 into Media Encoder. If I set my format to H.264 Blu-Ray and my Pre set to 1440 x 1080i 29.97 High Quality, My audio automatically sets to PCM Audio? Why? When I use the H.264 Blu-Ray with

  • MIR7 park incoming invoice

    Hi, I want to park the incoming invoice through Tcode MIR7, When I enter the respective PO number and other details and simulate it shows correct calculation, Problem is when I am going to Save it as parked document It throws an Error as (Tax code V1

  • Dinamic Select

    Hi all, I am trying to do a dynamic select in which I don´t know which are going to be the conditions of the clause WHERE. This is my code; DATA: BEGIN OF it_selopt OCCURS 0,         field      TYPE string,         value      TYPE string,       END O

  • Workflow WS00000038 Purch.Req - Event REJECTED not triggered

    Hi Friends! (SAP ECC 6.0) (Tcode SWE3 - BUS2009-REJECTED is active) When using WS00000038 Purchase requisition we have problem when an item is REJECTED. the Event that is triggered is BUS2009-SIGNIFICANTLYCHANGED. This leads to that the Workflow end