Can not get JMX metrics to show up in Enterprise Manager

Hi there,
I'm using these settings in my Instroscope.profile file (for tomcat out-of-box, no fancy configurations)
introscope.agent.jmx.enable=true
#introscope.agent.jmx.globalfilter=
introscope.agent.jmx.name.primarykeys= <empty>
introscope.agent.jmx.name.filter= <empty>
All metrics defined in PBDs show up, but I don't see JMX metrics.
not sure if this is the cause or not, but I'm seeing these errors in introscope log file:
java.lang.NullPointerException: while trying to invoke the method javax.management.MBeanAttributeInfo.isReadable() of an object loaded from an array (which itself was loaded from local variable 'attInfo') with an index loaded from local variable 'attributeII'
Any help is appreciated.
-Jinlin
Edited by: Jinlin Chen on Apr 19, 2010 7:57 PM

Windows: http://support.apple.com/kb/TS1538
Mac: http://support.apple.com/kb/TS1591

Similar Messages

I have a macpro and would like to watch films on my tv I have all the cables but can not get the tv to show the mac screen

Hi Ihave a mid 2010 mac 2.66 and can not get my screen onto the tv I have followed the instructions and I end up with a sreen which is part of the macpro , can anyone help

Care to share which OS you have installed?
Which instructions are you following? From the TV user manual?

I can not get my ipod to show on itunes i have followed all the procedures in help, what more can i do

I can't get my ipod touch to show up in itunes, I've followed all the directions it still will not show up. What can I do now?

I hope you get an answer on this. I am having similar problems. I have lots of music on my Nano and now have a new laptop. How do you move those songs into your new laptop from the Nano.

I can not get my pictures to show in header

I am trying to use SSI in my header and it will not show the image if the page is to deep in my files:
Does not work:
http://www.campingcoaches.com/states/oregon/oregon.php     The code is       <?php include("../../includes/header2.php"); ?>
but is I move it up on level:
http://www.campingcoaches.com/states/colorado.php     the Code is       <?php include("../includes/header2.php"); ?>
Then it seems to work fine
I have also tried to make the header relative to the site root at that point I got a error message.
http://www.campingcoaches.com/states/oregon/oregon.php you can see the code error
The menus both use the same Code and they work?
    <?php include("../../includes/menu2.php"); ?>
I am playing around and learning this so my knowledge base is relitively thin but I enjoy computers and the outdoors. Bottom line be gentle and assume you are I know very little at age 50 and just getting started.

let me know the location of each file, can you send the directory structure of all the files so that i can better help you

I can not get my contacts to show when I click the plus sign on compose emai. Yahoo fixed it yesterday but today its gone again

When I compose an email I click the +sign and my contacts do not come up. I had Yahoo help me fix it yesterday and today the contacts aren't there again. I can do it in IE but not in Firefox. What is with Firefox that it goes away.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.

Can not get shows "Purchased on Apple TV" in iTunes to show up on Apple TV

Hi - Ugg! To try and make this all work I deleted and re-added Apple TV to iTunes. I now can not get any of the shows that have been transferred to my laptop (which I did not want in the first place) to show up on the Apple TV.
All the shows that I bought now live in iTunes under "Purchased on Apple TV" but are not showing up on my Apple TV.
When I go to sync it wants to move the few shows I have left on my Apple TV over and I can't get it to not do this.
Thanks

Control-click the movies in iTunes, reveal them in the Finder, move them over as you would any other file, and drag them into the open iTunes application window. Rented movies won't play if moved this way.
(62979)

I can not get the temperature to work.

Howdy
I just got my MSI FX 5900XT yesterday and it is running fine. However I can not get the temperature to show on it. I have tried everything I can find on the forums like the different registry hacks and such. And it still does not work.
In the one program 3D Turbo when it is first starting up it looked like the temps are trying to work then they just shut off. It stats to lite up and stuff they just goes down.
Anyone know of another program or something else that I can try to get it to work ?
Again I have tried everything that I have found on these forums that people have suggested so do not say try that stuff.
I know this card has a temp probe as the 5900XT cards from other companies works fine people tell me. So unless MSI done something and took it out it should be there and be able to work just fine.

Quote
Originally posted by The Black Wibble
Every piece of information about the card is obtained through the device driver so I say it is a driver problem. I'd uninstall the driver, remove all traces of msi/nvidia driver binaries and config files using drivercleaner. Deleting all references in the registry to MSI or nvidia might help, too, before rebooting and installing nVidia's 53.03 drivers.
Tony.
I purchased the card also from newegg and i have yet to get the temp sensor to work. I read in one reveiw that the chip for that is not in this card. Also that the overclocking program from Msi should not be used. I have searched all over for some info on the dynamic overclock technology DOT .The only mention of it is on the motherboard overclocking but it looks like its part of the video driver ? I have had very poor results trying to overlclock this card. 3d clock 450 ram 730 locks up all the time . I also run a amd 2400
[email protected] Let me know if im missing something on this card or not but dont want the hazzel of returning it

Can not get the Cisco TSP to show UP - 2003 64bit

Can not get the Cisco TSP to show up on the list of Providers in Phone and Modem Options- Advance tab. Installed ver. 4.1, it seems to install correctly, with no errors but when I restart the server, there is no Cisco TSP001.tsp in the providers list. It works perfectly on my Windows 2003 servers, but will not work on this new Windows 2003 64 bit server. Any tricks to getting this to load?
Thanks
Keith

Hi
There is no 64-bit TSP yet. Whilst 32-bit apps will work OK for the most part on 64-bit via the WoW function, drivers tend to not be so flexible, and that's what TSP is...
You'll have to bother your Cisco accounts folks to get this prioritised, it is upsetting a lot of people...
Aaron
Please rate helpful posts...

I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.

I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.

Return, cancel, or exchange an Adobe order

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well?

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.

You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

TS3899 I can not get my RED circle with # of messages in my mail folder to show on my phone?

I can not get my mail icon to show th ered circle indicating how many pieces of mail i received - help?

Settings > Notification Center > Mail > [Your email account] > Badge App icon = "On"

Can not get my radio to start or show on menu

can not get my radio to start or show on menu

Which generation iPod do you have?
Identifying iPod models
B-rock

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Can not get JMX metrics to show up in Enterprise Manager

Similar Messages

Maybe you are looking for