Can not get  MacBook Pro 10.7.2 connected to Panasonic LCD projector to work

Any suggestions on how to get MacBook Pro 10.7.2 working with a LCD Panasonic Projector Model # PT-LB10NTU?

Thanks for the replys.
After spending an hour plus, uninstalling and reinstalling drivers and still not able to print, my husband, sits down, plugs in an ethernet cable, reinstalls the printer with the ip, and it prints. !!! I'd already done that , but that was before I deleted the preferences and installed the Gutenprint driver. I think it was the new Gutenprint driver that did it.

Similar Messages

  • Can not get MacBook Pro to display on Sony HDTV LCD

    So I bought a DVI to RGB (Y/Pb/Pr) cable. I have it hooked up and use Detects Displays. It detects a VGA connection but it will not show a picture on the TV. I have verified I am on the right input on the display and checked all just in case. I can't use DVI to HDMI because the TV only has one HDMI and it is being used by my cable signal. There is another input that is labeled RGB in the Sony manual but I can not find a DVI to RGB that looks like the plug configuration on the back of the TV. I would like to stay away from S-video and everything else because they do not support HD. Any help would be appreciated.

    Have you tried a DVI-VGA (D-SUB) cable? It does actually support any resolution supported by both the display and the computer (including HD). This will deliver the same signal as your analog component RGB cable. I use this with my SONY HDTV every day, works very well.

  • Can not get MacBook Pro to wirelessly connect to Deskjet 2512

    I have installed the software 3 times and I still can not connect to the printer wirelessly. The directions for converting from USB to wireless instruct to go to Finder/Applications/HP then choose my printer. The file only containsDevice Utilities, HP Scan, HP Uninstaller and HP Utility so I can go no further with the instructions. I installed the drivers again just to make sure that I hadn't missed something. Still no connection. Help. I have two of these printers and need them both connected.
    Thanks

    Hi sbritt,
    The Deskjet 2512 does not supports wireless printing.  You will need to either connect directly to your computer with the USB, or purchase a wireless print server.
    More information can be found here in the "Connectivity" section: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03244829&tmp_track_link=ot_faqs/top_issues/en_u...
    I work on behalf of HP.

  • I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

    I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
     Cheers, Tom

  • Since updating to iOS 6.1.3 can not get BBC I player, ITV player, Catchup and u tube to to work properly

    Since updating to iOS 6.1.3 can not get BBC I player, ITV player, Catchup and u tube to to work properly

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"
    If this doesn't work backup and restore your iPad using iTunes. Something must have been corrupted in your update process.

  • I can not get my mac book air to connect  to the net with my broadband

    How can I get my mac book air to connect to the net with a broadband ?

    Power off the router. Unplug it from the wall. Wait for few minuets.
    Power off the router. Wait a while.
    Connect the router back to to the wall.
    Power the router back on. Wait  until all lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/HT1455
    For more on this:
    http://support.apple.com/kb/HT4628

  • Can't Get MacBook Pro and Mac Pro to Network

    I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
    Thanks in advance for any ideas you might have on  how to fix this.

    I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

  • Can't get Macbook Pro 2,1 to 64-bit mode

    I'm running a late 2006 macbook pro with an intel core 2 duo 2.33 mhz and I was wondering if there is anyone that knows if there's a way to get it to boot in 64-bit mode. Thanks.

    donv (The Ghost) wrote:
    No 64 bit apps will run on the 32-bit kernel, but running 64-bit apps on the 64-bit kernel does not require start up to the 64-bit kernel. And, only some 32-bit apps will run on the 64-bit kernel.
    That's not quite correct.
    32-bit and 64-bit applications will run on either kernel.
    However 32-bit kernel extensions will only run on the 32-bit kernel, and 64-bit kernel extensions will only run on a 64-bit kernel.
    That's why Apple is currently defaulting to booting to the 32-bit kernel; most non-Apple kernel extensions have not yet been made available in 64-bit form for SL.

  • Can't get MacBook Pro to recognize Motorola H500 Bluetooth headset

    Hello all,
    I am trying to get my MacBook Pro to recognize a Motorola H500 Bluetooth headset. Bluetooth is ON and "discoverable" on my mac. When I go to system preferences and click "bluetooth", then "devices", the headset won't show up (it is turned ON). I tried clicking "Set up new device..." and won't work either.
    Any tips on how i can make this work?
    Thanks a lot!

    You need to put the H500 into discoverable mode:
    turn it off
    hold "call button" for 5 seconds or until the sold blue circle light appears
    now go do the bluetooth set up on your Mac....your H500 will show up and then just click thru continue....

  • Can't get MacBook Pro to restart

    Last night I ran my battery down to recalibrate. The power drained, I let it sleep overnight, and this morning I plugged the MagSafe back in to recharge the battery. The light shows green instead of amber, as if the battery is fully charged. I left it plugged in for a little bit and then tried to restart the MacBook Pro and it won't do anything.
    Any suggestions as to what I can do to get back up and running?
    Thanks!

    Have you tried removing the battery all together and then tried restarting? Keep in the mind the processor will run and half-speed without the battery installed but hopefully you should be able to restart and use your Mac.
    Good luck.

  • How can i get macbook pro to recognize my samsung fascinate to transfer music?

    I want to transfer the music already on my samsung fascinate phone onto my new macbook pro using the usb mass storage device option.  when i plug the phone into the usb port the computer recognizes that its there, but i am unable to do anything with it.  shouldnt i be able to open the files on the phone and transfer them to the computer?  any help would be great so i can get my music back

    Contact Samsung's tech support and/or read its user manual. 

  • How can I get MacBook Pro trackpad to recognize 4 finger tap as app switcher?

    On my Bluetooth trackpad I have it configured so that a 4 finger tap is the app switcher.
    I want to configure the trackpad on my new macBook Pro to do the same, so that when I am away from my desk and using only the laptop I can have a 4 finger tap be the gateway to an app switcher.
    Do I need to download some new capabilities to enable this 4 finger tap?
    The MBP trackpad does not seem to accept any 4 finger tap commands.
    Steve

    http://magicprefs.com/faq.html

  • I can't get Macbook Pro DVD drive to read my Windows 7 upgrade disk.

    I have a 15" Macbook Pro running OSX 10.6.8.  I have been trying to upgrade the OS in my VMWare Virtual Machine from XP to Windows 7.  However, when I insert the upgrade disk, it just spins for a few minutes and then tells me the disk is a blank disk.  I  tried it with the drive tied to the VM XP OS, but that did not work and got the same result.  I then tried the disk in a PC I have and it seems to work fine there.  Also, I have tried other disks in my Mac drive (e.g. DVD movies) and they seem to work as well.  I am not quite sure where the problem is.  Any ideas?

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question in any way.  I suggest you post your question on the VMWare Fusion forums.
    http://communities.vmware.com/index.jspa

  • Can not pair macbook pro with Logitech UE Boombox

    Hello,
    I am trying to pair my macbook pro, Lion 10.8.2, with the Logitech UE boombox. While the iphone paired immediately, the macbook pro discovers the device but will not pair, returning the following message:
    "The device does not have the necessary services"
    I read somewhere that there is need for A2DP support in the Lion, but documetation says it is supported.
    Thanks
    Eitan

    Same hardware and OS and no success pairing the UE speaker.

  • Can't get MacBook Pro to turn on.

    Hi, having some problems with my MacBook and could really use some help! Last night, I got the "system updates available" notification, so I downloaded and installed the updates. When it was finished, instead of restarting so the updates could take effect, I shut down and went to bed. Later, I got up in the middle of the night and noticed that the sleep indicator light was on (steady, not blinking) when I know for sure that I shut down. Didn't do anything about it right then. When I got up later in the morning, I tried to turn it on, and nothing. I looked in troubleshooting booklet that came with the computer and couldn't get anything fixed. I want to avoid having to completely wipe the HD clean, because I don't have hardly any of my files backed up (terrible, I know).
    Any help? or any tips on how I can at least back up my files? If I had that done, I wouldn't mind wiping it clean and re-installing everything. Thanks.

    This document addresses Mac portables that will not turn on: http://support.apple.com/kb/TS1365

Maybe you are looking for

  • Payment methods on sales orders

    Dear all, In CRM 5.0, I've a problem with payment methods on my sales order (billing tab): the value list is not activated (is empty) in my sales order type whereas with a standard sales order it works. It seems it is because the field Tax destinatio

  • Instrument I/O Assistant Missing

    Hi I am trying to communicate with an oscilloscope through Labwindows CVI by making use of the Instrument I/O Assistant, and on this site it shows how one is able to do that: http://zone.ni.com/devzone/cda/tut/p/id/4554 However in my tools menu there

  • Garbled greek symbols and superscripts in PDF

    Hi everybody I have troubles reading scientific pdf files where there are a lot of greek symbols and superscripts. Sometimes, the display of the symbols is flawless, then the next time I open the very same pdf-file, all the symbols and superscripts a

  • Task table XML element extract

    What would be the easiest way (inside or outside IDM) to extract an XML element from the task table?

  • Anybody else seeing a server 503 error when trying to update iMovie

    Trying to load the update for iMovie - keep getting a 503 error when I try to log in - anybody else having a problem?