Can not get my notebook to go wireless - CODE 22

I am trying to get my comp to go wireless but when I try this it shows the pro/wireless connection as being disabled.
It also says when I try to enable it "The device is disabled Code 22".
In the box below this with the heading "Device useage", it says "Do not use this device (disable)
Any idea's please anyone as it is doing my head in?

You did not mention what operating sistem You use , did wireless adapter ever worked for You, on what conditions it stopped working. So I had to make some assumptions.
In my oppinion you have following options. Try them in listed order:
1. Look in computer's BIOS if there is an option to enable wireless adapter
2. reinstall wireless adapter driver
3. Reinstall OS
If nothing helps then it is most likely hardware issue and needs physical repairing.

Similar Messages

  • I just bought the BDP-S1500 yesterday and can not get it to work via wireless

    I just bought the BDP-S1500 yesterday and can not get it to work via wireless????

    Hi BigDaddy317,
    Please the link below for further assistance in connecting your wireless device to the internet.
    https://us.en.kb.sony.com/app/answers/detail/a_id/33377/p/47329,47564,95482/c/65,66/kw/internet
    https://us.en.kb.sony.com/app/answers/detail/a_id/35983/p/47329%2C47564%2C95482/c/65%2C66/kw/internet
    Please let us know if you're getting the same result or the error messages that you see.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Can not get express to extend tc wireless signal

    hello,
    i have a tc 1tb and it is running my wireless signal in my house. but for some reason i can not get my airport express to extend the wireless signal. its like it will not pair up with eachother. any help please??

    i have a tc 1tb and it is running my wireless signal in my house. but for some reason i can not get my airport express to extend the wireless signal. its like it will not pair up with eachother.
    Is your AirPort Express Base Station (AX), the newer 802.11n or older 802.11g model?

  • Can not get my wireless to work for windows

    Just bought a new macbook pro 15 and used bootcamp to install windows 7 pro. Now I can not get any internet, wired or wireless. Is there any drives I can install to solve this problem?

    Yes, from within Windows install the drivers you downloaded when you first ran Bootcamp Assistant. It was the first menu item in Bootcamp Assistant.

  • I can not get sync to work between my windows desktop and mac notebook

    I have Windows Desktop, a mac notebook, and an android phone.. my desktop and phone sync fine, but i can not get my notebook to sync to my desktop..

    Try rebooting your router.

  • Can not get on line with new notebook

    can not get on line. *we have verizon, *bought new router to see if that was problem. *bought airport express to see if that would help, *my son, bs in computer security, has spent days starting over redoing, *we used his dell notebook to go to apple site (what's wrong with that picture?) it did work for awhile, wanted me to start time machine, but would go on line thru safari? says ethernet cables not connected - he tried 2 different ones. i'm at the point of taking this piece of #$@% back to best buy.

    Whoa, slow down. It's hard to understand exactly what's going on when you've explained your issue so unclearly.
    Please describe exactly what network setup you have at the moment - you have Verizon DSL? What router are you using, are you wired or wireless, how is the Macbook connected to the network, how are your other computer(s) connected to the network? Let's take it step by step and I'm sure we can find out what's going on.
    Matt

  • I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

    I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings?  I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

    1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
    As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
    2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
    You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
    ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
    3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
    Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

  • I can not get my facetime to work. I have a wireless connection but I can not get my facetime to work

    I can not get my facetime to work. I have a wireless connection but it is not working.

    Doublechecking, Jensen. What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

  • I recently purchased an airport extreme base station. I want to replace my older linksys wireless router. I had a successful set up but can not get it to talk to broadband modem, I am missing something but what?

    I recently purchased an airport extreme to replace my older linksys wireless router. had a successful set up but can not get connected to the internet. for some reason, which I am sure is apparent to others, i am missing some needed info to connect to the dsl broadband modem that I have.  would love some good tips.

    Try this:
    Turn off or remove power from the DSL model, the router, and your computer. Wait not less than one minute. Restore power to the modem and wait until the status lights indicate a connection to the ISP. Next, restore power to the router and wait until the status light shows connection to the modem. Last, turn on the computer. Check your Network preferences to be sure they are configured for a DHCP connection and that the router has received a valid IP address (not 169.xxx.xxx.xxx).

  • Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

    Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
    Airport gets it address DHCP.

    Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
    When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
    Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
    Note that the Express will not provide any additional wireless coverage when it "Joins".

  • HT4112 I can not get the 2003 Bluetooth wireless keyboard to pair with my ipad.  How do I do this?  According to the information above, this IS possible...

    I can not get the 2003 Bluetooth wireless keyboard to pair with my ipad mini, 32gb wifi.  How do I do this?  According to the information above, this IS possible...

    Never mind...  Didn't see the "not compatible"...  Stupid...  It's bluetooth.  Bluetooth apple should connect to bluetooth apple...  Period...

  • Can not get my Sungale Tablet to connect to wifi.

    Can not get my Sungale Tablet to connect to wifi.

    You need to get your wireless settings first. Get the SSID (wireless network name) and security key (password) for your network. Are you using a Linksys router? Follow these instructions to retrieve your wireless network's info: Checking the Linksys router’s wireless settings. Then on your tablet, go to Wifi under Settings. Select your network and type in the password. If your tablet is an Android, here's how: Connecting your Android™ tablet to your wireless network.

  • Can not connect the ipad 2 to wireless router. been working fine but some reason not working now being trying to solve this since 4pm today

    Can anyone help can not get my ipad to connect to wireless today. has been working fine but all of a sudden will not connect to Router. I have a kindle and a mobile and both of these will connect to the router wireless but the ipad will not.
    Been to my parents with the i pad and this will connect to their wireless router.
    Can not think of anything else to try

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
     Cheers, Tom

  • Hello, I have a Macbook pro retina-2013.  About Mavericks I could set my 4K monitor via HDMI on 2560x1440.  This I can not get through at Yosemite. Can someone help me there?

    Hello, I have a macbook pro retina-2013.
    About Mavericks I could set my 4K monitor via HDMI on 2560x1440.
    This I can not get through at Yosemite. Can someone help me there?

    They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
    Call Verizon's wireless tech support & explain your problem to them.  They will provide "step-by-step" instructions over the phone. 
    Take notes too!
    TIP:  If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything.  The automatic voice will then say,  "will connect you to a service rep."

  • WRE54G is already connected to WRT160N Router, but can not get access to internet?

    Hello,,,
    I have seven of rung expanders WRE54G and all settings i set as this link
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4104&p_created=11611...
    * same wireless SSID name
    * same Channle  ( What is the difference between the channel number 6 & number 11 for example?)
    * security ( i used WPA2 mixed, that is not in WRE54G, so what i should use)
    * Each Expander has own IP address as 192.168.1.2 up to 192.168.1.8
    Is the gateway mean the main IP of router 192.168.1.1 ?
    all those expanders connected with WRT160N ( the Link gets Blue light)
    but my laptop can not get the IP address near of any of those expanders, to get the access to the internet!!!!
    What is the reason please?
    Message Edited by Almowdmer on 11-10-2008 12:42 AM

    I am very happy to communicate with you ( I sure i can learn some thing from you my brother )
    Your words are true seven the number of expanders is not easy option
    or the cause of the success of the wireless network coverage May succeed strengthened,
    with one or two, but more than that needs to be a better distributor.
    I think I will use RangePlus WRT110 as repeater in some floor where the wireless signal
    is not can work, after connecting through the wire with the main router,
    and then I can get half the reference from the repeater when i useing the WRE54G expander
    What do you think?!!
    I put on my experience on this link
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread.id=115808
    Message Edited by Almowdmer on 11-16-2008 10:21 PM

Maybe you are looking for

  • Adobe digital editions will not open

    I all of a sudden keep having this error pop up every time I try and open Adobe Digital Editions. It used to work fine and suddenly won't anymore. The computer is using windows 7 home premium 64 bit operating system. I can't even even put books on my

  • Recording via line-in always below the center line

    I've been recording music via a line-in input on my sound card for a while now and had no real issues. However, suddenly all recording I do falls below the center line and I have to center the waveform after recording. Ive checked the connections, bo

  • Lakhs Currency in Thousands format in Oracle Report

    Hi Gurus, I have an requirement to change the currency amount display format should be in thousands for the lakhs currency since our client into UAE region and they wont use the lakhs currency format. Regards Ram

  • Acknowledgement on Failure

    Hi,   I am using HTTP adapter to send messages to third party. What happens if the handshake between XI and 3rd party fails? Will the messages be lost or will they queued? or do they they need to be re-processed?..So is there an automatic method in c

  • How to handle large result set of a SQL query

    Hi, I have a question about how to handle large result set of a SQL query. My query returns more than a million records. However, the Query Template has a "row count" parameter. If I don't specify it, it by default returns only 100 lines of records i