Can not get past "inactive" on airport?
Yep, can not turn airport active in Network prefs, "Turn Airport ON" button is grayed out. I believe this started w/ 10.5.8. My Mac pro is connected to airport w/ ethernet (bridged from a Linksys --ya know the linksys never has problems, it just runs -- what giver w/ apple's superiorty -- airport problems and printing problems just seem common w/ OS updates?), but I have to get on one of the other mac in the house have normal access to the airport.
I have trashed airport prefs in system config, hard reset the airport, but really no change? Thanks
I have the same problem since switched from Leo to Snow Leopard. Apple has a bug that trashes our work with the MAC.
Similar Messages
-
I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?
Make an appointment at the genius bar and get the phone replaced.
-
I Tunes wants to conituiosly restore my phone and after every restore it just goes back to the restore screen and i can not get past that to get to my apps etc. It is as if the system does noet regognise the fact that the resotre has been done.................
Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I verified my email, then went to sign in and I can not get past the Sign In.
I need some help. I made an account and verified my email. I then went to sign-in and a box pops up saying I need to review my account. I go back to review it and it takes me to the support page. In other words... I can not get past the Sign In.
Thanks, Andrew for your help. Not sure if you will see this, but I did the above and it said the HD was okay. Rebooted it and still won't go past login page. Tried it again and this time typed in the line /sbin/fsck -fy and then it came up and said HD was okay, but said something about being modified. I once more rebooted, but it still won't get past the login screen. Besides taking long to reboot, as before, I am able to enter my password, but then it hangs up with the rainbow icon rotating continuously. Does this mean that the disk is corrupt or partially so, and if so, can you advise how I should proceed? TIA again.
-
I can not get past the setup screen on my reader. What am I doing wrong?
I can not get past the setup screen on my reader. What can I do?
I have no idea what you mean; can you post a screenshot?
-
My macbook air is frozen, can not get past login
Hi my macbook air froze I can not get past the login
Please help"stuck on the page I was trying to load"
Page as in webpage on a browser?
Press Command + Option + Esc to force quit the browser.
When you post for help, please state which OS X is installed.
The more details you provide, the easier to help. -
I can not get past the license agreement and term and conditions page after updating my i5 IOS
Restart your phone and if that doesn't help, reboot the device.
Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up. -
Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help?
ExciteWalk wrote:
I can't post the link here cause I'll probably get banned at this point. So help yourself and search rumors elsewhere
That's not very helpful, why are you here? -
I am trying to unlock my ipad with the message that the ipad has not been backed up successfully in 2 weeks, but can not get past this screen. I have plugged it in, it is connected to the internet, but will not back up or do anything else. What can I do?
Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the iPad restarts, so you will be able to use your iPad -
New Build can not get past 2E on debug and 2A on dashboard
I have a new build - Big Bang, I7 -950, Corsair xms3 8gb 2 X 4, Radeon HD 5770 HD-577A-ZN, WD Caviar Green 1 TB, Liteon 24X DVD, Ultra X4 750 W modular power supply, 932 HAF Case.
When I boot I can't get past 2E on the debug and 2A on the dashboard and nothing on the monitor. I have removed everything and replaced it and checked the pins on the processor which are good to go and still comes up with 2E and 2AQuote
Corsair xms3 8gb 2 X 4
What's the story on the RAM? Dual Channel? Please provide specific specs, timings, recommended voltage, etc. With an i7 950, presuming this is an Xpower Big Bang & not an 1156 socket variety. -
Can not get past program load-up
The program was working fine however recently I can not move past loading up the program. I access aperture and the program comes up however then I go in to a in-definate loadup and cannot move forward.
This all happened after I deleted a project and then tried to move it back from my trash. The folder name was created however it never loaded completely and told me to re-boot system.
After re-boot, this is the current situation.
Any ideas are welcome.
Thank you - TonyHi Tony,
My guess is that putting the trashed project back has caused the problems; you can't just move them in and out of the Aperture library and expect things to be peachy. In Finder, right click the icon for the Aperture library and choose "Show package contents", and then drill down until you see all the project folders. Delete the problem project from the Aperture library, then take all the image from the trash and reimport them into a new project.
Alternatively, restore your Aperture library using Time Machine from the point just before you deleted the project accidentally. -
Can not get past blinking question mark after restarting in os 9
I have a ibook g3 clamshell 576mb ram 366mhz 30gb hd. I added the hard drive and upgraded the memory and then forgot to update the firmware before I installed os x tiger. So I keep getting kernal panics because the firmware is not upgraded. Like a fool when I upgraded to tiger I erased os 9 to free up more space thinking I would never use os 9 ever again anyway. Well the only way you can upgrade the firmware is to have os 9 installed so I copied os 9 system folder and applications from another ibook and transformed them to my ibook hd. I then clicked on the os 9 on the start up disk and tried to boot into os 9 so I could do the firmware update. Well now it will not boot past the blinking question mark. I guess there must of been some missing files? How do i get past the blinking question mark? Do I have to go and buy a copy of os 9 to reinstall it back on the ibook? Please help I am stuck here.
Don't think anyone will like the answer but this is how I did it. You have to put a os x cd in restart holding c and then follow through with the install. I used os x 10.0.3 then you have to do the same with a os 9 install disc and initialize disk image and then do the os 9 install download your firmware update and then reinstall the mac os x you are going to use. And for anybody out there a ibook g3 with an old airport card can connect to wep all you have to do is add a $ before your password works everytime. Hope this helps somebody. My only problem is after a downloaded the firmware update thats a .smi file evrytime I try to open it it says no application could open it. I thought .smi were self mounting image files. I never have used os 9 much and have no idea how to open this file. Can anybody give me a walk through on how to select a application to open this file so I can mount and install this firmware update.
-
Can not get past log on screen
I am having trouble logging on to our macbook when it boots up a window comes up log in unsuccessful error has occured. I have tried starting up in safe mode and resetting power management.
Help please???Thanks, Andrew for your help. Not sure if you will see this, but I did the above and it said the HD was okay. Rebooted it and still won't go past login page. Tried it again and this time typed in the line /sbin/fsck -fy and then it came up and said HD was okay, but said something about being modified. I once more rebooted, but it still won't get past the login screen. Besides taking long to reboot, as before, I am able to enter my password, but then it hangs up with the rainbow icon rotating continuously. Does this mean that the disk is corrupt or partially so, and if so, can you advise how I should proceed? TIA again.
-
I a have a pop up in Safari and can not get past it.
Here is the pop up. How do I get past it and is this real?
You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have an adware variant not covered by the support article. Ask for instructions in that case.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked. -
I am unable to get past the terms and conditions part of the upgrade. I have hit agree several times. What do I do?
Scroll down to the bottom of the terms and conditions, then the Agree button will light up and you can proceed.
Maybe you are looking for
-
Can SQL Developer be used for Oracle Support "HTML Output" Diag Scripts ?
Hi All, Oracle Support has asked me to run a diagnostic script (OTL_Diag.sql for anyone familar with the script) that produces output in HTML format using SQL*Plus to help troubleshoot an OTL problem we are having. Unfortunately I don't have SQL*Plus
-
I purchased a song from iTunes just to make a ringtone, and when I tried to do it, I got a message that says: this song can no longer be made into a ringtone. Does anyone know what this is about?
-
Creating a Good Receipt PO via DI API No matching records found (ODBC -2028)
Hi, I trying to create a Good Receipt PO via DI API. It is working when the user I used to log in to SAP via the DI API is a Professional User but when I changed it to a Limited Logistics User, I'm receiving the No matching records found (ODBC -2028
-
How to check the last receiveing date of a specific material
Dear Experts, I want to check the last receiving date of an specific material. Is there any standard t.code ? Mov.Type 101, 103. Thanks in advance. Dinesh
-
What is the use of NoAccess in reports
Hi Gurus 1. what is the use of NoAccess Role in Financial reports? regards Sarilla