Can not Get Raw to install

I have a new Mac, and am installing PS CS5 and bridge. It is not reading old camera raw files and will not install the plug in A screen comes up and says ask for help.. SO I am asking for help
Any takers?
THanks

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

I can not get itunes to install and open on my new laptop i am so frustrated i have uninstalled and reinstalled at least a dozen times in the last month

i can not get itunes to install and open on my new laptop i am so frustrated i uninstalled and reinstalled at least a dozen times in the last month
i got a error 7 this time but have had diff ones befpre please help

Will iTunes open in safe mode? Hold down CTRL+SHIFT as, or immediately after, you click the icon that starts iTunes and keep holding until you see this prompt.
Click Continue.
Assuming iTunes has opened, enable the menu bar, if necessary, with CTRL+B. Then go to Edit > Preferences > Store and untick Show iTunes in the Cloud purchases. Press OK, close iTunes, wait until it has had a chance to fully close then reopen.
Will iTunes open normally now?
If not, see Troubleshooting issues with iTunes for Windows updates for genral advice.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
tt2
Message was edited by: turingtest2

Please can anyone help me..I can not get itunes to install,i get a error message writing to file c and says i need to verify access to directory please help me

I need help in trying to install I Tunes,,,after multiple attempts I have now pulled all my hair out,and I am without I Tunes,,,I have tried everything ,and all the ideas that I have found in trying to seach the reason for my problem.it will download quick time,,,it gets about half way through I Tunes and I get a error message that says...........Error writing to File C /program files x86 itunes .tunes exc.verify you have access to that directory......I need the wisdom of any and all that are smarter than I about this issue.........I would appreciate any and all help ..thank you....

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HP 2542 can not get network printing installed

Computer
System Manufacturer: Hewlett-Packard
System Model: HP Pavilion g7 Notebook PC
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
Installed Physical Memory (RAM) 4.00 GB
System Type: x64-based PC
Printer
Product Name HP Deskjet 2540 All-in-One Printer series
Product Model Number
A9U27A
Firmware Version CBP1FN1333AR
I am trying to install this printer but I always end up in same place.
The install always stops wih the error "The Printer and the Computer are Connected to Different Networks"
The IP address of the computer is 192.168.1.93
The IP address of the printer is 192.168.1.94
My home network is conneted to the Internet via a AT&T Uverse. The gatway is 192.168.1.254.
The DNS is also at 192.168.1.254.
I can ping the printer from the computer at 192.168.1.93
I can access the printer via the web at 92.168.1.94 wih the usb cabel disconnected
Because I am at the max limit of the U-verse 2Wire box range I have installed a NetGear WiFi extender model WN2000RPT as an extender only, no DHCP or other features.
The configuration has supported other printers and the installing computer is connected via WiFi. I also have another computer at this same site that connects via WiFi.

Hi cramafab,
Welcome to the HP Forums.
I suggest you attempt the steps that are listed in the following document for Setting Up the Printer for a Wireless network for the HP Deskjet 2540 and HP Deskjet Ink Advantage 2....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How can I get QuickTime to install

I am not computer person. All I am is a mom who wants her kids ipods to work. I can not get QuickTime to install or uninstall so that I can use itunes. I updated Windows and I tried several other things but I just can not get it to work. Help me!!!!!!!!

I finally got the quicktime to download and I also downloaded itunes but it won't work right. When I click on the icon to pull it up so that it will recogize my ipod it tells me it has a error for me to check with microsoft. I had a shuffle at one time that worked and when you plug your unit in it should take you to your playlist and things put it doesn't do that it just tells me I have a error.

How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.

What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????

Hi I asked a computer engineer to install RAW plug in 8.7.1. on PSE 12 for me, and he couldnt do it either.   I have bought PSE 13 and followed the advise I was given - go to Edit - expert - Help - plugins - RAW - update- and IT WORKS !!!    DW
Original message----
From : [email protected]
Date : 25/01/2015 - 11:53 (GMTST)
To : [email protected]
Subject : How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    created by susanl96972449 in Photoshop Elements - View the full discussion
Hello, I have been experiencing similar problems and followed the suggestion and yes, the raw icon comes up as illustrated but there is nothing there to indicate any further action can be taken. So I am presuming that means it is installed and no further action required?
Here's my problem: I have had no problems getting my pics into my organiser in Elements 12 from either my Nikon D7100 or my Fujifilm X100S - until last week. Suddenly when they are imported all I see is the timer icons but they don't open to let me view them. If I click on one it will open and I can then edit it but it will not save an image onto the grid for me to view so it's really frustrating not being able to view all my photos in order to decide what to edit and compare them.
Here's what action I've taken so far - restarted the computer (endlessly), checked the updates and installed them, checked I have the latest raw plug in (I do) and gone into edit/update thumbnail (doesn't do a thing) - and torn out a fair amount of my hair. So anyone out there experienced this and can give me some advice? Please?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7129439#7129439 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7129439#7129439
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes

I can't get ITunes to install. I get the message: Error 2 Windows. Not able to find Apple Application Support. Uninstall iTunes and reinstall. I did that and still get the same message. Thanks for your assistance. I'm using a Dell Computer, Windows 8

Can't get iTunes to install. When I download it, and go through installation, I get the message, Error 2, windows 2; can't find Apple Application Support, uninstall and reinstall iTunes. When I do that I get the same message again. Thank you for your assistance.

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the

hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help

What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work

I can not get iTunes or Quick Time to install on Windows xp machine. I get

I can not get iTunes or Quick Time to install on Windows xp machine. I get an error 1316 - c:\wndows\installer\iTunes.msi
and then I get an error -1603 ?
any ideas, oh I am trying to put iTunes & QuickTime on a Different Hard Drive Partion 'D:' not on the,
Normal 'C:' Drive Partion... Any Help You can give me.
My Email address is: [email protected]
Thank You in advance! Al Adams
SONY VAIO Windows XP

I strongly recommend that you install iTunes to the default C: paths. You can change the perferences to keep the actual music files on your D: partition.
Here is a place to start with the installer errors:
InstallShield Consumer Central FAQs

I can not get any updates and therefor not use Java as it only run updates for Mac 10.7. and later? How do i get the updates to install and use Java?

I can not get ny updates and therefore not use Java, as it only run updates for MAC 10.7. and later. How do i get the updates to install and use JAVA ?

In Snow Leopard you update Java from Software Update (in the Apple menu). You can check your version by opening Terminal and typing
java -version
(don't get creative and type anything else)
The latest version is 1.6.0_65.

After installing OS X Yosemite 10.10.2 - I get this when I try to open Illustrator " To open "Adobe Illustrator CS6" you need to install the legacy SE6 runtime." I can not get seem to do this, how is this done?

After installing OS X Yosemite 10.10.2 - I get this when I try to open Illustrator “ To open “Adobe Illustrator CS6” you need to install the legacy SE6 runtime.” I can not get seem to do this, how is this done?

Robert,
It seems to be enough to create empty folders at “/System/Library/Java/JavaVirtualMachines/1.6.0.jdk” and “/System/Library/Java/Support/Deploy.bundle”, to make Illustrator use Jave SE 8 as it should.
This way to get round the legacy JAVA requirement was presented by Kals in post #7 in this thread:
https://forums.adobe.com/thread/1637908

I have CS6 10.0.6 x64 extended on Mac 10.6.8 and Canon 5D mark 111. I can not get CS6 to read my raw files. No new updates available. Any ideas guys?

I have CS6 10.0.6 x64 extended on Mac 10.6.8 and Canon 5D mark 111. I can not get CS6 to read my raw files. No new updates available. Any ideas guys?

If you go to Photoshop>About Plug-in and click on the words Camera Raw, what version does it list?
I suspect you still have Camera Raw 7.0
When you go to Help>Updates from within photoshop cs6, it says nothing available?

I can not get my serial number to work for CS6 when I try to install on new PC

I can not get cs6 to load on my new pc the serial number will not work, It says it is valid but there are no programs on my computer, but i have downloaded them.

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

Can not Get Raw to install

Similar Messages

Maybe you are looking for