Can not get the Cisco TSP to show UP - 2003 64bit

Can not get the Cisco TSP to show up on the list of Providers in Phone and Modem Options- Advance tab. Installed ver. 4.1, it seems to install correctly, with no errors but when I restart the server, there is no Cisco TSP001.tsp in the providers list. It works perfectly on my Windows 2003 servers, but will not work on this new Windows 2003 64 bit server. Any tricks to getting this to load?
Thanks
Keith

Hi
There is no 64-bit TSP yet. Whilst 32-bit apps will work OK for the most part on 64-bit via the WoW function, drivers tend to not be so flexible, and that's what TSP is...
You'll have to bother your Cisco accounts folks to get this prioritised, it is upsetting a lot of people...
Aaron
Please rate helpful posts...

Similar Messages

  • I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect

    I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • How can I get the direction handles to show up for the Position attribute?

    How can I get the direction handles to show up for the Position attribute?
    I have CS3 and I did the formentioned test and was able to make the handles work for the scale attribute but they don't seem to show when editing the position values.
    *I am in the graph editor looking at the "value graph"
    *I select the keys and convert the keys to auto bezier (I also tried the ease in and out buttons)
    *It changed the graph the way you might think (no longer linear) however the handles are not showing to edit further.
    *I also tried using the "convert vertex tool" (part of the pen tool) and still no luck getting those handles.
    *the handles only show up in the speed graph but that does me no good.
    Please help!
    THANKS 

    I don't have CS3 installed on any of my machines any more but your value graphs for position should look something like this:
    There are no handles for position in the Graph editor. You adjust the position curve by editing the motion path in the composition window. Press the G key to bring up the pen tool, then use the modifier keys Crtl/Cmnd and Alt/Option to temporarily switch between select and convert vertex to adjust the paths. Changes will be reflected in the value graphs. You will get editable handles with scale and rotation because these are not spatial properties. Spatial properties, position, Anchor Point, all XY & Z coordinates are edited in the comp window or in the layer window after revealing the properties. IOW, you edit anchor point position paths by opening up the layer window and choosing Anchor Point from the display options.
    The Manual isn't wrong. Here's a link to the live docs.

  • I've read two solutions to my problem and neither worked. I can't get the repeat option to show in some events, though it does appear in others.

    I can't get the "repeat" option to show in some events, though it does appear in others. How can i get it to show when I need it? (I read two "soluntions" that supposedly worked, but neither worked for me.)

    Greetings,
    I can't say I've seen that behavior before.  I' be curious to see a screen shot of it in the edit mode where you edit the fields.
    Beyond that I'll offer generic troubleshooting steps:
    Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
    If that doesn't resolve the issue:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Go to iCal > Quit iCal
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    --- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard.  You will see "Library" in the menu.
    4. Launch iCal and test.
    If the issue persists:
    1. Go to iCal > Quit iCal
    2. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    --- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    3. Launch iCal and test.
    Hope that helps!

  • Why am I not getting the buttons of Hide/Show, Refresh, Back, Home, Options ?

    Gorgeous Hello All,
    If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
    Am using Adobe RoboHelp, Version 10 and IE version being 10.
    A hurdle :-
    When I File -> View -> Primary Layout : I am getting only these options of Search, Hide, Contents, Index, Glossary, Print being displayed on the screen, eventhough I have ticked for Hide/Show, Refresh, Back, Home (Home -> Advanced Properties -> Home : and declared the respective url as well) , Options  courtesy View -> Pods -> Project Set-up -> Double Click on Windows -> Double Click on NewWindow.
    Why am I not getting the buttons of Hide/Show, Refresh, Back, Home, Options when I File -> View -> Primary Layout ?
    Cheese - Vipin Nambiar

    Hey Piyush Buddy, where were you since my morning !!! :-) :-) :-)   Your simple question here made me realize where did I make the slip of my brain and now all the desired buttons are appearing on my screen. 
    I just made simple parameter changes called View -> Pods -> Single Source Layouts -> Right Click On Microsoft HTML Help -> Setted as Primary Layout (earlier my Primary Layout was setted up for Multiscreen HTML 5).
    THANKS GALORE Piyush buddy - Your simple question to me made a mammoth and galores of help to get my train on track.

  • Can not get the high resolution photo from iCloud on the iPhone5s, unless re-share the photo to the iCloud.

    after restoring the iPhone, the iPhone can not get the high resolution photo from album of iCloud, unless re-share all the photo to the iCloud.

    If you plug up both to computer, open itunes, click "back up to computer" on both (not necessary for the one that's being transferred to) then on the one that's sending data click "back up" in the iTunes menu. It will then back up (if not already done in sync). Now plug up the second one (being transferred to) and on the iTunes menu, click "restore from backup" then choose the device you just backed up, and click "ok" or what it says.
    Hope this helped
    P.S. I am referencing to using iTunes <11. Some features I show here might not be available in iTunes 10

  • I can not get the temperature to work.

    Howdy
      I just got my MSI FX 5900XT yesterday and it is running fine. However I can not get the temperature to show on it. I have tried everything I can find on the forums like the different registry hacks and such. And it still does not work.
    In the one program 3D Turbo when it is first starting up it looked like the temps are trying to work then they just shut off. It stats to lite up and stuff they just goes down.
    Anyone know of another program or something else that I can try to get it to work ?
    Again I have tried everything that I have found on these forums that people have suggested so do not say try that stuff.
    I know this card has a temp probe as the 5900XT cards from other companies works fine people tell me. So unless MSI done something and took it out it should be there and be able to work just fine.

    Quote
    Originally posted by The Black Wibble
    Every piece of information about the card is obtained through the device driver so I say it is a driver problem.  I'd uninstall the driver, remove all traces of msi/nvidia driver binaries and config files using drivercleaner.  Deleting all references in the registry to MSI or nvidia might help, too, before rebooting and installing nVidia's 53.03 drivers.
    Tony.
    I purchased the card also from newegg and i have yet to get the temp sensor to work. I read in one reveiw that the chip for that is not in this card. Also that the overclocking program from Msi should not be used. I have searched all over for some info on the dynamic overclock technology DOT .The only mention of it is on the motherboard overclocking but it looks like its part of the video driver ? I have had very poor results trying to overlclock this card. 3d clock 450 ram 730 locks up all the time . I also run a amd 2400
    [email protected] Let me know if im missing something on this card or not  but dont want the hazzel of returning it

  • I have made a burn folder with photos exported from I-photo.  It now shows in information, that the date is created and modified is different from the original digitized date.  How can I get the original date to show in the info from Finder?

    I have made a burn folder with photos exported from I-photo.  It now shows in information, that the date  created and modified is different from the original digitized date.  How can I get the original date to show in the info from Finder?

    The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
    Regards
    TD

  • I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

    I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
    I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us  reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

    You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • TS3988 I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem

    I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem to be t

    There are only two things that you must do to connect a device to calendars:
    1)  In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
    2)  Turn on calendars on the same page.
    You said that the iphone 4 and ipad **used** to automatically sync.  Do they no long sync?

  • I just upgraded my iMac to OS 10.8.5 from 10.6.8 and now I can not get the calendars on my Mac and my iPhone 4s (running iOS 8.3) to sync

    I just upgraded my iMac to OS 10.8.5 from 10.6.8 and now I can not get the calendars on my Mac and my iPhone 4s (running iOS 8.3) to sync.  I already tried replacing the calendars on the phone with those on my computer but nothing happened.

    Set up iCloud
    Set up iCloud (2)

  • I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

    I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

    It actually sounds like the warp text window is opening off screen.
    Resetting the photoshop elements 10 preferences should fix it.
    *Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
    *Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
    *Press Yes

  • I can not get the flash player plug in to work with Internet Explorer

    I can not get the flash player plug in to work with Internet Explorer

    Zoltan71 wrote:
    I just bought this computer. My Internet Explorer is version 11.0.1
    I have the box checked to Install new version automatically, but it has not done any upgrading.
    I can't get the computer to update anything as far as I can see.
    The flash plug in does work with the Crome browser but it will not work with Internet explorer.
    I looked in the manage add-ons and it says enabled.
    I also went into the safety tab and deselected
    Active X filtering.
    Restarted and still does not work.
    I need help.....
    Chrome uses a different and separate plug-in.
    There are things about IE you need to know, especially 11. Specifically:
    "User-Agent Strings"
    That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
    Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
    The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
    Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
    They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • Can not get the agent from rule determination

    Dear expert,
      We have a PR workflow,for one step, the agent is determined by one rule,In our Q system,everythink is ok to get the agent correctly,and the workflow also can works.but in our P system,can not get the agent from the rule,when we simulate the rule,the agent can be get smoothly,but in workflow,realy can't get the agent(after trace the workflow), so would you like to give me sone suggestion, whant had happen in our workflow?
    Many thanks!
    Best Regards,
    Kerry

    Tks!
    I have one question,how to check the agent assignment is active?
    and also want to say,the rule that determin the responsible agent is used at one step of the workflow,not for possible agent of task ,and the rule's type is RESPONSIBILITIES.
    Best Regards
    Edited by: Kerry Wang on Jun 25, 2010 3:14 AM

  • Hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the

    hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help

    What I am saying is ..........
    The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
    The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship  with the Carrier and then follow the Carrier's process to unlock
    With a PAYG it usually means adding a specified (by the carrier ) amount  usually £15 /£20 depending on the carrier
    This is how O2 function and according to Gemma  this is how Vodafone work

Maybe you are looking for