Can not get the screenpicture to fit the screen.

can not get the screenpicture to fit the screen. problem acurred after hooking up to an external screen. tried everything in screensettings, but the screenpicture is larger than the screen

When you slide the cursor to the edge of the screen, does the screen image scroll, allowing you access to everything (menu bar, Dock, etc.) even though you can't see all of it at once?
If it does, go to the Apple menu and open System Preferences > Trackpad. Is the box for "Screen zoom" checked, under "Two fingers"? If so, press the Control key and drag two fingertips downward (toward you) on the trackpad. Does the screen image zoom down to normal size?
Another possibility is pressing Option+Command+8. If System Preferences > Universal Access > Seeing > Screen Zoom has accidentally been turned on, this will turn it off and return your screen to its normal size.

Similar Messages

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

HT1430 Can not get mail , it sayes that the user name or password is incorret, it the right one

Can not get mail , it sayes that the user name or password is incorret, it the right one

You need to contact the email provider and reset your information. All your iPhone does is send the information to the provider and they are stating your username or password are incorrect. If you contact the provider they can help you reset it so it will work with your phone

HT4623 I can not get my Ipad to update the latest software rendering my Ipad useless. It keeps saying software update unavailable.

I can not get my IPAD to update the latest software the update says it is unavailable at this time try later I have been trying for 5 hours any suggestions as this renders my IPAD useless

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

HT4539 my ipad is disabled and I can not get it to open my main screen

my ipad id disabled and I can not get it to open my main screen, how can i regain access to the product

If it's showing the red disabled screen then you will need to connect it to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

I want to change my password but can not get passed verification even though the answers are correct, so I have asked for an email and none has come.Can some one help?

I have tried to change my password and get to the part where you need to verify by answering the questions, and I get can not get any further, as it tells me the answers aren't the ones they have but I know it is correct, so I have asked for an email to be sent, but no email comes.I receive other emails from iTunes but not the one helping me to change the password. Has any one got any idea why?

Contact iTunes customer support, no one in these user to user support forums can assist you.

Why can I not get my windows to fit the screen

I am not sure what happened today, but in Safari the window does not fit the screen on my Mac Book Pro, even when you click the green + button. What should I do to rectify. I have done a full Shutdown, and still the same.

One other thing that might be handy:
You can set the default Safari window size as follows. Open a new window (command-n). Resize. Close window. Subsequent windows should open at that same size.
charlie

How can I get my window to fit the screen? It is too big.

All of a sudden a few days ago my window on my MacBook pro expanded and now does not fit all at one time on the screen. I must have done something but do not know what. I hope someone can help me to get the window to fill the screen so I don't have to move the window back and forth to see everything. Thanks, Quinner

Turn off Zoom from the Universal Access and Keyboard & Mouse panes of System Preferences.
(107642)

Since updating to the new version the work web page that i use will only print 2 pages even if there are more. I can not get it to print all the pages in the document.

for instance....I have a documents that has 6 pages, I can scroll down and see all the pages but when i hit the print button it will only print 2 pages. I tried to change it in the setting part but there is no feature that allows you to change it.

For many years, Firefox has problems printing when some style rules are used. However, I am not aware of any changes for the worse in Fx4 (at least, until now I wasn't aware of any).
A couple of thoughts:
(1) Is it possible you were using an add-on in Fx3.6 that fixed this problem, but the add-on was disabled during the upgrade because it wasn't compatible? (Sometimes that can be fixed with a little hack.)
(2) Are there any obvious settings differences that could be affecting printing, such as fonts, margins, or shrink-to-fit/percentage?
(3) Does the workaround of selecting the entire page (Ctrl+a) and then choosing Selection under Print range in the Print dialog work? Unfortunately, this can slice through lines and images, but it often works around problems with style rules.
In the interest of saving paper, it often is useful to experiment with a PDF printer driver. If you don't have pdfFactory, you can install a trial version for testing: it lets you view the results without first having to save the file. (If you save with the trial version, there is a footer to that effect.)
(4) Is it an HTML5 problem? You can toggle the HTML5 parser off, but this is a global setting, not site-specific. If you are familiar with about:config, filter on html5 and double click '''html5.parser.enable''' to toggle its value from true to false. This helps for some sites, but has no effect on others.

I have a first generation ipod touch. I use a wireless router to get on the internet. My connection has frozen and I can not get out of a google search screen. Any help is appreciated. Ray.

I have a first generation ipod touch. I use a wireless router to get my internet connection. It is frozen on opening up a website and will not release. Even when I power down and restart it goes back to the same failed connection. Any ideas greatly appreciated. Ray.

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cookies, cach and history.
- Restore the iPod

Can not get web page all of the way out to edge of computer screen tried to drag but did not work

just got a new computer ..when i go to a web page the page does not go all of the way out to the side of the screen...i tried to grab and drag it but it did not work...i am new to this computer thing...need help

I just had that problem today and although it unfortunately probably won't help you minus47, (as you said disabling your Add-ons didn't help) I tracked my problem down to 'Fierr' as the culprit and disabling it fixed it.
To be honest I don't know why as 'Fierr' hasn't been updated since January '11 and Firefox only started playing up today.
The only other thing I updated today was Flash Player but I'm not sure if I installed it before it started playing up though.
Hopefully this might help someone else.

IPad iOS 8.0.2 My whole screen magnifies itself: I can not get it back to a normal screen size. How can I?

Since updating my iPad 3 to 8.0.2, my screen is so magnified, it's unusable but I can't get back to normal-size to try to solve the rest of it's many problems like slow or not starting. How can keep my screen at normal-size?
I have already rebooted it from 20% charge. It is fully charged now. Screen returned once on its own but again magnified. It is so large that as you type the opening pass-code, ( if you can find circled numbers of the pass-code at all) then only one number within a circle is revealed at a time.which makes opening the iPad very difficult as it continually makes mistakes on the code. This iPad 3 is 6 months old, traded in with a broken screen as my warranty ran out. The updates caused other problems but if iIcan't start, I can do nothing at all.

Try double-tapping the screen with 3 fingers and see if that zooms it back out - and if it does set Settings > General > Accessibility > Zoom 'off'. If it doesn't zoom you back out then try triple-clicking the home button and see if that turns it off, and if it does you can change what a triple-click does via Settings > General > Accessibility > Accessibility Shortcut.

LabVIEW Touch Panel -- I can not get activesync to connect between the TPC-2012 and my XP workstation. There is no USB client connection on TPC-2012

How do I get the TPC-2012 to connect to my workstation? I have read all the hardware manuals, getting started manuals: nothing works. The remote access using http://x.x.x.x/RemoteAdmin does not work. I have tried to get the FTP service working using the instructions in "How do I configure the FTP server on tpc-2006 and TPC-2016" . Active sync seems to want a USB connection only. I have tried to connect a serial line between com1 on the TPC and com4 on my XP workstation with no results.
I have been able to use the touch panel module with my iPAQ. It worked flawlessly the first time.
Help!
Louis Prugh
General Dynamics

Hi David,
thank you once again for your help.
So when viewing your Local Area Connection>>Status
you're seeing data packets sent but no packets received on your desktop
machine? - Yes
Is your desktop configured with a static IP address or is it
configured to obtain an IP address automatically?I' ve tried both static IP address and that it obtain IP address automatically, I have also done it with the TPC.
Also, does your TPC
get a valid IP address when the connection to your desktop is present? - when TPC is set to obtain adress automatically it gets IP address and then after some time it loses it - it is set to 0.0.0.0, and then it obtains the IP adress again and so on.
Can you provide the address, subnet, and gateway you're getting for
both machines?- I've done it, but it didn'e help
Also any firewall settings or exceptions you may have
active if the firewall is enabled? - firewall is disabled
I'd also like to know what
modules and toolkits you do have installed on both the TPC - TPC is new and I haven't installed there anything.
On my desktop - I have standard Labview 8.2,the real time module is installed. All I know, there are already drivers for TPC2012 in this LabView version. On the included CD I have only drivers for another TPCs.
Thanks,
Martin

When I close firefox it doesn't really close it seems to be hidden. Then when I try to start it again I have to Alt, Ctrl, Del, go to process , turn it off then hit it to start again. I can not get it to open in the hidden process that it is in

Apparently when I close Firefox it doesn't really close. I get told when I try to open Firefox later "Firefox is still open, you must close Firefox, Then reopen it. Then I hit Alt, Ctrl & Del, go to process's then I have to close it then reopen it. It does not open until it is closed in process's.

The process can take a few seconds to close. Sometimes you need to use Task Manager.

HT1212 i never connent the iPod to the computer . i still can not get to erase or restore the iPod

i never connent the ipod to the computer. my son change the passcode and forgot it .

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Can not get the screenpicture to fit the screen.

Similar Messages

Maybe you are looking for