Can not install driver for my USB E-MU interface sound card

I have iMac mid 2011

Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!!

Similar Messages

  • My pc on windows vista can not install driver for my Iphone 4s on 6.0.1

    I can do everything in itunes but the windows driver can not be installed.

    I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142). 
    I too have contacted Logitech for support and am awaiting a reply.
    Can we get some help over here?

  • Can not install driver for Creative Soundblaster Audigy 2

    Hello
    I excuse myself for my unworthy english.
    I disabled motherboard audio in Bios before installation and before putting soundcard in
    It says that i can not find any soundcard
    but when i search for audio? drivers in thedevice manager(correct word for it's)
    it copies some files and audio works
    the sound card is listed in dxdiag but in games i have bad performance
    My system:
    Windows XP Professional(directly after installing windows i installed SP2 then SP3)
    Direct X 9.0c
    Intel Pentium 4? 3 Gh
    Gigabyte GA-8G000MK
    2 GB DDR ram
    ?Nvidia 6200 256 MB
    Soundblaster Audigy 2 ZS
    My system is completely new.
    Directly after installing windows(on formated partition)
    i installed SP2 then SP3
    then i installed Motherboard drivers
    then i installed graphic drivers
    then i installed antivirus drivers
    then i installed wireless lan drivers
    then i tried to install audigy 2 ZS drivers.i tried from CD and newest.Both didnt work
    i disabled antivirus before installation attempt
    i would be happy about help
    Only one cable is used from CD-rom to soundcard:? CD-in
    no other cable..buti was able to install long ago
    Message Edited by ignaz on 08-2-2008 09:27 AMMessage Edited by ignaz on 08-2-2008 0:36 AM

    Your welcome try my pax drivers that might slove your issue

  • Can't install driver for my ATI Radeon 9800 XT VGA card!

    Hello:
    I own a computer with these specs:
        Operating System                                  Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
        Computer:
          Computer Type                                     ACPI Uniprocessor PC
          Operating System                                  Microsoft Windows XP Professional
          OS Service Pack                                   Service Pack 3
          Internet Explorer                                   7.0.5730.11 (IE 7.0)
          DirectX                                               4.09.00.0904 (DirectX 9.0c)
        Motherboard:
          CPU Type                                              Intel Pentium 4, 2400 MHz (18 x 133)
          Motherboard Name                                  MSI 845E Max (MS-6566E)  (6 PCI, 1 AGP, 1 CNR, 2 DDR DIMM)
          Motherboard Chipset                               Intel Brookdale i845E
          System Memory                                      512 MB  (PC2100 DDR SDRAM)
          DIMM1                                                  256 MB PC2100 DDR SDRAM  (2.5-3-3-6 @ 133 MHz)  (2.0-2-2-5 @ 100 MHz)
          DIMM2                                                  256 MB PC2100 DDR SDRAM  (2.5-3-3-6 @ 133 MHz)  (2.0-2-2-5 @ 100 MHz)
          BIOS Type                                            AMI (09/13/04)
          Communication Port                                Communications Port (COM1)
          Communication Port                                Communications Port (COM2)
          Communication Port                                ECP Printer Port (LPT1)
        Display:
          Video Adapter                                     RADEON 9800 XT - Secondary  (256 MB)
          Video Adapter                                     RADEON 9800 XT - Secondary  (256 MB)
          3D Accelerator                                    ATI Radeon 9800 XT (R360)
          Monitor                                              LG F900B  [19" CRT]  (121137790)
        Multimedia:
          Audio Adapter                                     Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [A-1]
        Storage:
          IDE Controller                                     Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
          Floppy Drive                                       Floppy disk drive
          Disk Drive                                          IC35L060AVV207-0  (60 GB, 7200 RPM, Ultra-ATA/100)
          Optical Drive                                      SAMSUNG CD-R/RW SW-252S  (52x/32x/52x CD-RW)
          Optical Drive                                      TEAC DVD+RW DV-W58E  (DVD:8x/4x/12x, CD:32x/16x/40x DVD+RW)
          SMART Hard Disks Status                     OK
    I just replaced my old graphics card NVIDIA GeForce2 MX/MX 400 with another old model card, ATI Radeon 9800 XT. Everything was fine until I tried to update a recent ATI driver after uninstalling my old Nvidia driver with DriverCleaner Pro. I get this error message:
      "Setup failed to launch installation engine: Class not registered"
    Then, tried to install the driver through device manager with the update driver option. I directed to the driver folder on my desktop and the driver update went through, smoothly. However, when I put my computer in standby mode and then restore to full operation
    I got a BSOD with this error msg.:
    ati2dvag.dll-Address BF039614 base at BF012000, DateStamp 49344e53
    Now I can't use standby mode because the computer just shuts down instead of operating in standby.
    Is there any idea why my new card is not being fully accepted in my OS and how can I fix this issue. BTW, my ATI card is an 8x speed and my AGP slot supports a max of 4x speed, but I think my card is reverse compatible with 4x slot with the same voltage (1.5V).

    Thank you BOSS for your quick response:
    I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
    I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
    There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
    Thanks in advance!!!

  • HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings.  I've been reading the help but I don't seem to have a re-install drive for the USB port.  Is this something post 2008 or can I get one from somewhere?

    I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings.  I've been reading the help but I don't seem to have a re-install drive for the USB port.  Is this something post 2008 or can I get one from somewhere?

    Hey Stella,
    Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
    What to do before selling or giving away your Mac
    http://support.apple.com/kb/HT5189
    All the best,
    David

  • My Windows 7 Ultimate {32bit} does not install driver for my LG HDD HXD5 320GB

    My windows 7 does not install driver for my LG EXTERNAL HDD HXD5 320GB & its attached using a USB.
    It works perfectly on Other computers having Windows 7 & Windows XP & Windows Vista, just doesn't work on mines.
    I have had internet connected when it was installing hence it got the opportunity to search Windows Update for it but it fails :(
    It works even on my computer ( I have DUAL OS) on windows XP SP3 but i need it to work in Windows 7.
    Please help Thanks :)
    & i have already tried tried the solution which was proposed for another topic in this forum on which it was to Uninstall the driver using Device Manager and unplug the HDD and attach again and let the computer detect and install it again, my computer
    does detect it but fails to install the drivers.
    My Computer has a 2GB of RAM & 2.40GHZ (32bit) with an Intel Core 2 Duo Processor and had come with Windows Vista Home Premium 32bit installed, & i upgraded to Windows 7 Ultimate 32 Bit which is completely updated to all the Updates that Microsoft
    had offered (using the built in Windows Update in Control Panel)
    I have got screen shots of it too.
    http://shumayal.fileave.com/HDD.zip
    PS: Same is the case with some of my USB Flash drives, but in their case they don't get detected at all but get in Windows XP SP3 (which is another OS on my pc) as well as on windows 7 and other OS on OTHER COMPUTERS but not mines in Windows 7.
    Thanks :)

    Hi,
    I recommend you try to update the BIOS and the motherboard chipset drivers for Windows 7 firstly.
    After that, please refresh the USB Stack:
    Control Panel – Device Manager – USB Serial Controllers – Right Click on EVERYTHING and UNINSTALL all except the category itself – Reboot
    . This refreshes the drive and the USB stack
    Then, right click on the LG EXTERNAL HDD HXD 5 320GB in Device Manager and select Update Driver Software.
    You may also try the Windows 7 built-in
    Hardware and Devices troubleshooter.
    Hope it can help you!
    Best Regards,
    Miya Yao
    This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial
    to other community members reading the thread.

  • 10.5.5 update hangs panic msg. can not find driver for 7,2,5 system dualG5

    Down loaded 10.5.5 and ran it, loaded software and rebooted on G5 Dual 2Ghz system.
    10.5.4 worked no problem.
    Got back panic saying can not find driver for platform 7,2,5
    Anybody know how to back this update back to 10.5.4?
    or fix this to get 10.5.5 working.
    Thanks

    I am experiencing something very similar. After downloading the update, it closes all app's and attempts to install. I've been looking at a stalled progress bar for 30 minutes.... No error messages yet, but my prospects don't look good. Any advice?

  • I bought a new macbook, but I can not install Pages for free

    I bought a new macbook air, but I can not install iWork for free. Why?

    So you are saying it is asking you to pay in the App Store?
    Так вы говорите, она просит, чтобы вы заплатили в App Store?
    Вы должны объяснить, что идет не так, мы не можем видеть ваш компьютер.
    Peter

  • Can not find driver for Thinkpad T500

    I can not find driver for Thinkpad T500? Could you please help me?
    Moderator edit: Matched Subject to content.

    Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.
    Step 1: In NI OPC Server Create a new Channel. Channel Name can be whatever you want.
    Step 2: Device driver will be ControlLogix Ethernet.  You can also enable diagnostics if you want.
    Step 3: Network adapter. I used default setting.
    Step 4: Write only latest values.  Duty at 10. ( These are default settings and are recommended.)
    Step 5: Finish new Channel setup
    Step 6: Click on Icon to create new device
    Step 7: Device Name can be whatever you chose.
    Step 8: Select Device Model in this case CompactLogix 5300
    Step 9: Device ID For me was IP Address XXX.XXX.XXX.XXX,1,0    (Note the 1 directs path to backplane. The 0 to the slot where processor is)
    Step 9: Device timing.  Leave at defaults.
    Step 10: Auto demotion leave unchecked.
    Step 11: Leave at defaults Do not generate on startup Delete on create and allow subgroups
    Step 12: Port and watchdogs at default settings
    Step 13: Project options leave at default. (In my case I changed to short as that is what most of my tags were)
    Step 14: Create tagname from device.
    Step 14: Finish Device setup.
    You now have two options. 
    Option 1: Start creating tags as you need them. (This is what I did)
    Option 2: Right Click newly created device and select properities.  Then select database creation and click auto create.
    Go To Lookout  and create new driver. 
    Select OPC Client
    Server name will be from dropdown menu. National Instruments:NIOPCServers
    Click okay
    You should be done and smiling. 

  • I can not install updates for Adobe 9 Pro

    I can not install updates for Adobe 9 Pro

    When you can not install the updates from the Help menu, go to http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (similar for MAC) and install the updates in order. It is a good idea to download from the most recent back in case there are any you can skip (each updates indicates the prior version required). You generally need to reboot only after the last update.

  • Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

    Hi,
    I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
    I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
    The printer works fine on my other laptop with Vista on it. Help!

    Hi peshi77,
    Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
    Once downloaded, please follow the on screen instructions. I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Can not find driver for Geforce 420 Go (32MB) - Satellite 2410

    Hi,
    I have a Toshiba 2410-S504 and I'm having difficulty finding drivers for my nVidia Geforce 420 Go! The one's from the nVidia website will not install (If I force install them it reboots with a blue screen) and the latest one listed on the Toshiba website is from 2002!
    I've tried ones off of laptopvideo2go but with no success, I managed to find one that installed without bluescreening on reboot but it doesn't provide any graphical acceleration (Movies and DVDs, and games 'lag' when viewing, I fixed this by reverting to the Toshiba website drivers).
    Could someone point me in the right direction of new drivers?
    Thanks,
    Toby

    Hello Toby
    Unfortunately there is no wrong or right direction. I have checked Toshiba download page and there is no newer driver. But if you are ready to make a experiment for all of us you can try to install the latest driver from Satellite Pro 6100. I have googled a little bit and found out that both units have the same graphic card. If you check Toshiba download page for Satellite Pro 6100 you will see that latest driver is from year 2003.
    If you test it please let us know what happen.
    Good luck!

  • Can not install software for the camera on my G10

    Hello
    New poster today seems my CD/DVD media drive has stopped working, tried to install software for new camera, just getting blue screen and a small flashing disc, seems there is no power in drive.
    Any advice welcome only had machine since late June 2005.Am I doing something wrong or does it sound like a service problem
    THANK YOU!
    JIM.

    Hi
    Well like xaver said it could be a hardware problem but before you contact the ASP try to remove the drive from the device manager. After new reboot the OS should recognizes the driver again. Maybe this procedure will help you to solve this problem. But if not, please contact the service partner
    Bye

  • I can not install itunes for my original windows 7 32 bit on my computer

    i cannot install itunes for my original windows 7 32 bit on my computer

    What happens when try to install iTunes? Error messages?
    You might have better luck posting in the iTunes forum since you do not hav an iPod touch problem.

  • Help I can not install iCloud for Windows 4.0.2

    Every time I try to install iCloud for Windows 4.0.2 I receive a error message. Then I try downloading the file install but still no luck. What am I missing? I am using Windows 7 Pro with all other updates installed Core i7 3770K,16 Gig memory,64 bit OS,Service pack 1.

    My machine at home actually states that I must use the older version for video to work, but for other installing this version has been a useful workaround for a number of issues, not necessarily limited to the video system, but also compatibility issues with other hardware and software.
    See also Troubleshooting issues with iTunes for Windows updates in case you have any troubles pulling out the old software before installing the new.
    tt2

Maybe you are looking for