Can not install hana plug-in in eclipse
Hi All Expert,
I am trying to install eclipse plug in. From help->install software.But i got problem like following. Any idea about this problem?
Hi Joshua,
Have you configured properly network connections (e.g. proxy?) according to your environment?
https://help.hana.ondemand.com/help/frameset.htm?76137a37711e1014839a8273b0e91070.html
BTW, I would recommend switching to Eclipse Kepler - Juno support will end soon.
HTH!
--Vlado
Similar Messages
-
Can not install device driver in Windows 8.1
I can not install driver of my webcam(Odyssey OD 202) windows 8.1 (upgraded from windows 8)
The USB webcam is shown in Device manager.
When I attempt to update driver and search for it automatically it shows the following message.Hi Atanu Barai,
There may be a compatibility issue between the Microsoft driver and the device . I agree with ZigZag ,you may need to download the driver from the manufacturer website .Please pay attention to the compatibility ability issue with the
Windows 8.1 when you try to download the driver.
If the issue persists, try to plug in the device with another USB port to have a check .To verify whether it is caused by the USB controller ,we can try to connect another USB device to have a check.
Meanwhile ,please check the Event Viewer for related information.
Best regards -
Can NOT install Standard ONE on a 2 quad-core processor machine (licensing)
This is from Oracle's licensing (July 2009):
===================================
“When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket. However, in the case of multi-chip modules, each chip in the multi-chip module is counted as one occupied socket.”
This is also from Oracle's licensing (July 2009):
=====================================
“Oracle Database Standard Edition can only be licensed on servers that have a maximum capacity of 4 sockets. Oracle Standard Edition One may only be licensed on servers that have a maximum capacity of 2 sockets.”
Now, this is what it seems to be:
===========================
1 quad-core AMD/Intel Xeon chip counts as 4x0.5=2 sockets (reached the maximum capacity limit in the licensing terms) by simply using 1 (single) quad-core CPU box.
and that's it - you can NOT install Standard Edition ONE on a 2 quad-core CPU Linux box :(((((
For a AMD/Intel multi-core Linux boxes
===============================
it can be a single quad-core CPU box (4x0.5=2 sockets -- but, paying twice the processor license - because it is now 2 sockets) or
it can be a 2 dual-core CPU (2X2x0.5=2 sockets -- but, paying twice the processor license) or
it can be a single dual-core CPU box (2x0.5=1 -- paying only a single processor license)
I think it is time for Oracle to revisit the licensing terms for Standard ONE edition and change it to simple socket count (don't count the cores). It is getting more expensive to use Oracle Standard ONE.zaferaktan wrote:
Everybody should also know - and OPN folks confirmed this morning - that an Oracle Sales person does not have the "legal" authority to overwrite what is written in OLSA. Sales can not rewrite the OLSA. However, Sales can request changes or addendums to the specific contract, which are reviewed by Oracle Legal and approved by Sales senior management (right up to Charles and Larry if needed).
That said, very few Oracle employees are allowed to discuss any aspect of licensing terms. The official first point of contact is Sales, and they may only be the carrier pigeon of missives from the authority.
When someone buys Oracle, OLSA is the only legally binding document. Everybody should keep the copy of the OLSA which is in effect at the time of their purchase, given that OLSA can be modified at a later date from the actual purchase.That happens to be true of any license or sales agreement, from Oracle or not. Also note that if you purchase support, renewals may affect the original OLSA.
And it's one of the reasons old timers in these forums (such as Dan and myself) will prefix nearly any license discussion in the forums with "check with sales" and suffix it with "and anything you hear on the internet is probably useless in a court of law when you get audited".
and after all that - thanks for digging into the details and posting them.
(With the warning to any others using the information that the facts need to be reconfirmed for each individual case and date. A judge usually frowns on a defense of "It happened to a friend of a friend of mine" or "I read it on the internet")
Edited by: Hans Forbrich on Sep 8, 2009 9:43 PM
By the way - what you write is a change of policy. At one time, a box that could support 4 CPU but only had 2 CPU installed would not qualify for SE1. Good news indeed. -
Can not install a plugin in CS4
hi there
i tried to install three plugins on my cs 4 (using x64 SEVEN OS), it finished installing but there were no sign of that plugin in filter menu ...
i tried "Imagenomic Portraiture Plugin v10.1008" but there were same reslut ...
the point is that i can not install any plugin on my CS 4 ...
i also tried opening cs4 32 bit in my x64 OS but there same result too ...
its making me crazy ...
please help ..Some plug-ins are found under FILTERS, some under IMPORT-EXPORT, some under scripts, possible some under ACTIONS, etc. Have you checked in these odd places as well?
Another possibility is that it is installing under an earlier version of Photoshop if you have one installed.
That excludes the possibility you are dual booting Win-7 and it is, for some reason, installing on the wrong partition.
Bill, Win-XP & 7 by dual boot -
can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version
Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
Cheers, Tom -
Can not install the Ipod software on Windows XP SP2
Hello, I can not install the 'Ipod logiciel' [Ipod software?] for my Ipod Nano on my PC with Windows XP SP2. I don't have any error messages but the installation gets stopped just before its end. I mean, the Install Shield Program disappears while the steps "Publication of the product information" Does somebody know what's happening or where the problem might comes from? I would really appreciate your help. Merci d'avance,
WilliamI have the same problem. The old version 4.7 works fine on XP but upgrading to version 6.0 or above gives me an error message that says ( The iTunes music library .itl file is locked on a local disk or you do not have permission for this file.) I bought my wife a Nano and the XP machine won't see the Nano,but if I plug the Nano into my Laptop with Win 2000 with the same 4.7 version of iTunes it will work just fine. The only problem is that all the music files are on the desk top machine. I can load the nano but I have to do it in a round about way. I tried updating iTunes about 6 different times with the same results.You must remove Itunes through ad/remove hardware in windows, restart win. then reinstall the older version. I tried the repair rout several times but that did no good.Good luck and I hope Apple can help us out with these problems!
-
My problem is that the jre isn't running, and when I try to download and install the plug-in, first it thinks it is already installed ( it was ) and tries to uninstall it.
I get the error message
ERROR # 0x80040702
Description: Failed to load dll:ActPanel
Setup will not terminate
It will not install the plug-in over the old one, and the old one is missing a dll ....Help! Where can I get this dll, and install it, or force the plug-in to install over the top of the messed up one!This is an InstallShield error. I Googled with the error code and found a number of hits, this looks promising:
http://www.planetblackandwhite.com/blackandwhite/techsupport/faq.shtml#installunhandled
I'd also suggest that you visit the InstallShield knowledge base. -
Can not install Ovi Store Nokia 603
can not install shop. Tried to install four different versions, including misrepresented and that you download the browser when they click the icon.
At the end of the installation says: "Installation not possible"Download this CWRT file to microSD card. Turn phone off insert in phone turn on. Then browse to CWRT file run. Then open up web browser go download ovi store file install. All fixed.
Note:
Make sure to install CWRT file in C:\ when prompt. This will not get lost when phone get reset.
Attachments:
CWRT Core 1.00(11124).sisx 810 KB -
Can not install powerdvd10 on B540 which was uninstall accidently
Can not install powerdvd10 on B540 which was uninstall accidently. When I try to install from downloaded exe. file
there was error message "This software can only be installed on a lenovo system"hi DILIPDKJ,
Just to verify, is this the PowerDVD software that you're trying to install?
PowerDVD 10 BD
v10.0.3029.52
IN12STW153WW5.exe
114 MB
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I can not install apps in my new ipod touch ios 6
i can not install apps in my new ipod touch ios 6
it is showing appication is failed to installed
why is this happening
can any one help me....The problem is when i drag n drop downloaded apps from torrentz into itunes n syncronize it add those apps into my itouch ... but the message shown in my i touch is .. that application failed to install..
in the itunes those appliacations are unchecked automatically ... but i can install apps which are downloaded from the istore .... they are working properly
but the ones i downloaded from the torrentz are not getting installed.. -
I have lost my iMovie program and I can not install a new one. My computer says that it is not possible to download anything on my main drive
How full is your drive? You need at least 10/15% of free space.
-
OS 10.6.8 on documents created by Pages 3 will not open
They want a Version 4 while my iMac does not install because it needs 4 Pages 10.7. But I can not install 10.7 because my iMac is not Core2 duo ... Funny dilemma!!You should be able to Save as: iWork 08, but i don't know how it works on Mountain Lion. On my Snow Leopard the Save as window has a part looking like this
Or you can send me the document if you are in a hurry and I save it as iwork 08 for you. Click on my blue name and you'll find my address. -
I can not install Windows 7 By applying Boot Camp
Hi
I have a problem
I can not install Windows 7
By applying Boot Camp
I have a message appear
Boot Camp does not support installing Windows on this Mac.
Boot Camp does not currently support installing Windows on a Mac with a 3 TB hard drive.
Hardware
3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
32GB 1600MHz DDR3 SDRAM - 4x8GB
3TB Fusion Drive
NVIDIA GeForce GTX 675MX 1GB GDDR5
Apple Magic Mouse + Magic Trackpad
Apple Wireless Keyboard (English) & User's Guide
Accessory Kit
Software
iLife '11
OS X Mountain Lion
Apple did not you tell me about this problem at the time of purchase
Is there a solution to the problem ?Unfortunately, I can not partitioning Alhardsk such manner described Palmqal
http://im32.gulfup.com/mGuB1.jpg
http://im36.gulfup.com/hLrW1.png
http://f.cl.ly/items/04323L1k173F1r2h0v3b/Screen%20Shot%202013-01-30%20at%203.56 .21%20PM.png
Is there another application that divide Alhardsk ? -
in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986
Maybe you are looking for
-
I am currently using firefox 3.0.19 '''bold text'''
-
Duplicate CD Won't Play in CD Player
Hi, I am trying to make a back up copy of my CD's and they won't play in a regular CD player. Please tell me what am I doing wrong? I am using Disk Utility. First I select the disc in the drive. Go to "File" then "New" then "Disk Image from folder" H
-
I have Adobe Acrobat version 11.0.0 installed with Adobe CC. I cannot download PDFs from the internet (in this case from PubMed National Library of Medicine). If I try to do this I get a popup message saying that "ADOBE ACROBAT NPAPI PLUG-IN, VERS
-
Having trouble booting my iMac, put Tech Tool Pro Disk in Drive, rebooted with C key, cannot boot. restarted hold down the option key to get the recovery drive, but cannot get the TTPro disk to eject
-
How to extend Generated Idoc types?
I want to create Idoc type ZMRESCR01 as an Extension of Basic Idoc type MRESCR01. I have created the Segments that I want to add to the Basic type using transaction WE31. When I try to extend the Basic Idoc type with transaction WE30, the error messa