Can not install NVIDIA Display Drivers

I have a T61 (7664-17U) with XP SP2.
For sometime now I've had problems with the NVIDIA display drivers. Occasionally my NVIDIA drivers disappear and are replaced by VGA . I notice this when I can't Standby or Hibernate my system, those options are grayed out. Also, interacting with the display is difficult..
I've tried several times to update my 12/2007 drivers to the latest ones from the Lenovo site. The latest drivers appear to be installing (InstallShield?) but I get a message after a few minutes that "The system has not been modified. To install the program at a later time, run the installation again." No other information.
I found out early that if I install the old drivers everything was OK, until yesterday. Yesterday when I tried to install the old drivers I got
" Error Code: -5004 : 0x80070005 rror InformationSetupDLL\SetupDLL.cpp (1968 PAPP:NVIDIA Display Drivers PVENDOR:NVIDIA Corporation (http://www.nvidia.com/) PGUID:EFB7D050-CAD2-11D4-B34D-00105A1C23DD $9.1.0.429
@Windows XP Service Pack 2 (2600) IE 6.0.2900.2180."
I tried several iterations of installing the drivers including downloading the latest ThinkVantage installer.
How can I solve this problem? Should I try downloading the latest drivers directly from NVIDIA website?
I'm very appreciate of any help! Thanks, Tilly

"Should I try downloading the latest drivers directly from NVIDIA website?"
You can't install drivers obtained from the NVidia website. You'll get a "No compatible hardware found" message.
You're supposed to only install video drivers obtained from Lenovo.
If your T61 is still under warranty, a request for service is in order.
Centex

Similar Messages

Satellite P105 - Can't install nVidia display driver

I tried completing the download multiple times for the nVidia Display Driver 9.7.5.4.
The first times the setup would not complete citing "that this computer does not have the correct hardware.." , then the Windows message came up and said that "if this setup did not complete successfully click here blabla" and I did that.
Now when I run the setup it still stops in the same spot. But now it says that *"the setup can not be completed because this driver only runs on Windows Vista, and this is not Windows Vista." But the thing is I do have Windows Vista!*
Current Display Driver: Mobile Intel(R) 945 GM Express ChipSet Family
Laptop Model: Satellite P105-S6177
Operating System: Windows Vista 32-bit

Hi
> Current Display Driver: Mobile Intel(R) 945 GM Express ChipSet Family
And then you want to install an nVidia display driver?
LOL :D
I think you can not install an nVidia display driver because your notebook is equipped with a Intel chipset and graphic card.
You will never be able install nVidia display driver and so did get the message that you don’t have the correct hardware.
Intel graphic cards and nVidia graphic cards are different things so do not mix it!
Some P105 was equipped with nVidia cards and otheres with Intel card and it seems that you have an Intel card.

P7n diamond does not accept nvidia display drivers

Hi
Recently assembled a machine on p7ndiamond and loaded with windows xp pro 32 bit,zotac 8800gt 512mb ddr3 graphic card.
My problem is whenever I try to install the nvidia display driver for windows xp..the installation starts fine but just after a few moments the screen blacks out and cursor begins to blink in the top left corner.Thereafter nothing happens...does not accept any commands and stay as it is.
Ultimately I have to reboot.
Any kindly soul out there may please help me out from this woe.
My configurations are-
msi p7n diamond motherboard
xms corsair ram 2x1 gb 800mhz
intel q6600 processor
zotac 8800 gt graphic card,512mb ddr3.
coolermaster 800w smps.

Boot to "Safe Mode", then use Driver Sweeper to get rid of current VGA drivers ==> http://downloads.guru3d.com/download.php?det=1655
Once done, reboot to normal mode and install 177.92 Release Date: August 26, 2008
http://www.nvidia.com/object/winxp_177.92_beta.html
# Supports GeForce 6-series, 7-series, 8-series, 9-series, and 200-series GPUs, including the newly released GeForce 9800 GTX+, 9800 GT, 9500 GT, and 9400 GT GPUs.
# Adds support for NVIDIA PhysX acceleration on all GeForce 8-series, 9-series and 200-series GPUs with a minimum of 256MB dedicated graphics memory (this driver package installs NVIDIA PhysX System Software v8.08.18).
# Experience GPU PhysX acceleration in several full games and demos today by downloading the GeForce Power Pack.
# Adds support for 2-way NVIDIA SLI technology with GeForce GTX 200-series GPUs on Intel® D5400XS motherboards.
# Supports single GPU and NVIDIA SLI™ technology* on DirectX 9 and OpenGL.
# Supports CUDA™.
# Supports Folding@home distributing computing application. Download the high performance client for NVIDIA GPUs here and join the NVIDIA team: #131015.
# Supports GPU overclocking and temperature monitoring by installing NVIDIA System Tools software.
# Includes several 3D application performance improvements. The following are examples of improvements measured with v177.92 WHQL versus v175.19 WHQL driver:
* Single GPU increases up to 11% in 3DMark Vantage (performance preset)
* Single GPU increases up to 11% in Assassin's Creed DX10
* Single GPU increases up to 15% in Bioshock DX10
* Single GPU increases up to 15% in Call of Duty 4
* Single GPU increases up to 8% in Enemy Territory: Quake Wars
* 2-way SLI increases up to 7% in Bioshock DX10
* 2-way SLI increases up to 10% in Company of Heroes: Opposing Fronts DX10
* 2-way SLI increases up to 12% in Enemy Territory: Quake Wars
* 2-way SLI increases up to 10% in World in Conflict DX10
# Includes numerous 3D application compatibility fixes. Please read the release notes for more information on product support, features, driver fixes and known compatibility issues.

Lenovo b560 can't install nvidia display driver

hello i've learned that lenovo b560 computers got 2 graphic cards one is intel hd graphics other is nvidia 310m but i can't install the nvidia driver it always gives the no compatible drivers found error :/

hi Frost1,
Welcome to the Forums.
The B560 with Intel+Nvidia graphics uses the Nvidia Optimus Technology to switch between the Intel GPU (for power saving) and the Nvidia GPU (for applications that requires more processing power).
If you have Windows 7, try the following:
1. Restart the machine and hit F8. On the menu, select "Disable driver signature enforcement".
- Sample image
2. Install these drivers then reboot:
1st: Intel Onboard Graphics Driver for Windows 7 (64-bit)
2nd: NVIDIA Display Driver for Windows 7 (64-bit)
If you still get the error, can you PM me your serial number or indicate your machine type (e.g., 0679-3JU) to check the PC specs.
Regards

Satellite C50-B-13D - Can not install display driver

Hello,
I have a notebook Toshiba Satellite C50-B-13D. I had to reinstall my Windows 7 Professional 32 Bit OS. Now i have a problem with the drivers. For example i can not install the display driver. After i give permission to make changes on my computer the Error message "This computer does not meet the minimum requierments to install this software. Does anybody know what i can do?

Originally Posted by TomDexter
As I’m not mistaken the Satellite C50-B-13D does not contain dedicated GPU but the notebook was equipped with the Intel Celeron N2830 CPU which support the Intel HD Graphics 4000
So you need to install the Intel HD 4000 display driver.
Usually you have two possibilities to install the driver.
You can execute the installation.exe (setup.exe) file or you will install the driver within the device manager. I recommend you to choose the 2nd option in case the standard procedure does functions.
The driver from Toshiba EU driver page has to be unzipped.
Within the display-20140528122046 folder you would find the TC40214900E.exe
This is an zipped folder. Click right on this file and choose “unzip here”.
Now you will get another TC40214900E folder where you would find all the driver files (dll).
Next step: go to device manager, choose graphic card and click update/install driver
Now choose the “Advanced” installation option and point to the unzipped driver folder.
The system will pick up the files automatically and you could finish the installation.
That’s it.
Hello
I have same problem and can i use mentioned driver "TC40214900E.exe"? my notebooks model is satellite C55-B5201

New kernel and problems installing nvidia-legacy drivers

I just compiled new kernel, and I can't install nvidia-legacy drivers properly. Pacman installs them, but the module (nvidia.ko) goes to /lib/modules/2.6.19-ARCH, and I want it to 2.6.19.2.. It doesn't work if I just copy the module..
I've compiled kernel many times without problems when I was still using Slackware. So, what do I need to configure to use the new module directory? I Propably made some small/stupid mistake..
I tried legacy drivers from nvidia.com, but they didnt compile.. weird, gonna try that again too..

You need to install the nvidia drivers, or any other non-kernel drivers, specifically for the kernel you are using. Arch packages the nvidia drivers to work with the Arch kernel packages, and the "Arch way" to deal with your situation is to modify the appropriate PKGBUILD to match your kernel, create a custom package with makepkg, and install it with pacman.
You can also use the nvidia installer, but in that case the nvidia files installed on your system will not be under pacman's control.

Not Able To Install Nvidia Graphics Drivers

Hello all!
This past week I just finished putting my new system together with a K8N Diamond Plus. Only major problem right now is i am not able to install Nvidia's drivers. Below are my components...
XP 64-Bit Edition
MSI K8N Diamond Plus
AMD Athlon 64 X2 3800+
BFG 7900 GTX 512MB
1 Gig Coirsar Ram
2 Wester digital HD in Raid 0
When I try and install the graphics drivers i get the message " The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."
I used the chip set drivers listed here: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
Also I have tried the ones from NVIDIA's site: http://www.nvidia.com/object/nforce_nf4_winxp64_x16_6.83
The graphics drivers i used are from NVIDIA's site: http://www.nvidia.com/object/winxp64_81.98.html
BFG Tech support guy had me look under display adapters in device manager. It only has Standard VGA Graphics Adapter listed. He said I did not have my chip set drivers installed (though i have), or the motherboard was not recognizing it. Also he said they do not support XP-64 and would not offer me any more support so long as i run it.
I just can not believe that XP 64, 7900 GTX, and this great K8N Diamond Plus can not get along.
Any advice anyone has for getting my Diamond Plus and my graphics card to jive together would be greatly appricated.
Thankyou all!!

Thankyou guys for the responses. I was able to find drivers that worked with my card here..
http://www.laptopvideo2go.com/index.php?drivers&series=80&os=2&type=1&dir=1
Now my only current issue left is that I have no sound. It is enabled in the BIOS, installed the 64-bit drivers from MSI site, tired installing drivers off disk. Any suggestion?

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?

Now that my operating system was updated to OSX 10.9.2 (Mavericks) I can not get the print drivers installed

Now that my operating system was updated to OSX 10.9.2 (Mavericks) I can not get the print drivers installed

For an existing printer, see > OS X Mavericks: Reset the printing system
To setup a new printer, see > OS X Mavericks: Set up a printer

Printer CD will not install software and drivers

Laptop: Acer Aspire 3690 series
Model: BL50
OS: Windows Vista SP2 Home Basic (32 bit)
Printer: HP Desktop F4100 series
*To my knowledge both laptop and printer are old models, with the laptop being as old as 7 years.
Short Story: After formatting my laptop and reinstalling the OS, the CD won't install the drivers from the disc so the printer would work correctly on my computer. It always results in an error.
Long Story: My Windows Vista laptop had an issue. There was a problem with the OS that kept mysteriously eating up space of the computer hard drive. It was so bad that the computer kept reporting it had 0 bytes of free space left on the hard drive. I always had to find free up space somehow because the printer won't print without free space. I couldn't even use my superiorly better computer because the printer only works with Windows 2000, XP and Vista, it doesn't work with Windows 7 (I tried). One day I decided I had enough of it and reinstalled the OS of the laptop. I used DriverMax and exported all of the drivers from my laptop to my flash drive since I don't remember my laptop coming with a driver disc. Everything went smooth and my laptop was operating like new except for one issue: No matter how many times I tried, I could not install the printer drivers from the printer disc onto the computer.
When the disc is installing the drivers and software, this would show:
and then this error:
I wasn't sure if I there was a model number on the printer or not but here is a photo of it:
Getting help from the HP Support forum seems to be my only option so hopefully I can find a solution here. Thank you to anyone in advance who can help me resolve this I would really like to get this fix as I not too long ago bought several cartridges for this printer to last a while, and there's not much money to buy a printer OR another computer.
This question was solved.
View Solution.

Greg-HP
Welcome to the HP Community Forum.
The printer software for your OS may be available for download from the printer's Support pages.
Install Full Feature Software – Printer
Should it be available, be sure you do save a copy of the software, the manuals, and whatever else you find that you find of interest. One never knows when these vintage items might disappear. Smiling.
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

I can not install Windows 7 By applying Boot Camp

Hi
I have a problem
I can not install Windows 7
By applying Boot Camp
I have a message appear
Boot Camp does not support installing Windows on this Mac.
Boot Camp does not currently support installing Windows on a Mac with a 3 TB hard drive.
Hardware
3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
32GB 1600MHz DDR3 SDRAM - 4x8GB
3TB Fusion Drive
NVIDIA GeForce GTX 675MX 1GB GDDR5
Apple Magic Mouse + Magic Trackpad
Apple Wireless Keyboard (English) & User's Guide
Accessory Kit
Software
iLife '11
OS X Mountain Lion
Apple did not you tell me about this problem at the time of purchase
Is there a solution to the problem ?

Unfortunately, I can not partitioning Alhardsk such manner described Palmqal
http://im32.gulfup.com/mGuB1.jpg
http://im36.gulfup.com/hLrW1.png
http://f.cl.ly/items/04323L1k173F1r2h0v3b/Screen%20Shot%202013-01-30%20at%203.56 .21%20PM.png
Is there another application that divide Alhardsk ?

I can not install the Icloud control panel on a new windows 7 pc wtih outlook 2010. I get "you can't sign in because of a server error" .

I can not install the icloud control panel on a neww windows 7 pc with outlook 2010. When i try I get "you can't inssign in because of a server error"
I have :
turned of the windows fire wall and antivirus protection
stop and started the bonjour service
done the "netsh winsock reset"
updated all the drivers
I can login to icloud.com with no problem and view my calendar.
Apple chat also provide me with a test id and password to try to install the icloud panel, I got the same error message???
Anyone have a fix?
Thanks,

To solve this problem you can:
Windows 7
1) Click on Start
2) Type cmd and press enter
you will see a new window
3) type "netsh winsock reset"
4) restart the machine
should work.
If still does not work you must disable the firewall and antivirus
Para solucionar este problema debes hacer lo siguiente:
en Windows 7
1) click en Inicio
2) escribe CMD y pulsa enter
te va a aparecer una nueva ventana
3) escribe "netsh winsock reset"
4) reinicia la maquina
deberia de funcionar.
Si aun no funciona debes de deshabilitar el firewall y el antivirus

Can not install iTunes v7.6.2 on my PC

Hello
This is my first post so excuse me if it has something wrong. I get the new iPod Nano 3G but, I can not install iTunes. When I am trying it shows me this:
Unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again.
Thanks to everyone who can help me!

Okay guys everything is okay now
I remove the registries from Windows. Here you can find more information:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:Windows_-_Updating%2C_removing%2C_64_bit_versions%2C_etc#Removing_GEARDrivers
Thanks!

Can Not Calibrate the display. The factory profile for the display...

I have an apple cinema display 20" and a mac powerbook g4 (1.25 GHx PowerPC g4, 1.25 GB DDR SDRAM) with os 10.4.9. All of my software is up to is date.
I used to be able to calibrate my colorsync profiles. My computer's hard drive recently failed and I had it replaced and the system re-installed (If any of you live in NYC, I took it to tek Serve, and they know what they are doing).
Now when I try to calinbrate my monitor I get the error "Can Not Calibrate the display. The factory profile for the display could not be found." Like I said I have updated to 10.4.9 but this hasnt solved my problem. I have restarted my computer, and this has also not solved my problem.
Any help!?! Please! This is important to me as I do color work for print and I need to see colors accurately When I use my computer.

I fixed it already. There was indeed a problem in the preferences. In my case I removed the whole preferences folrder to the desktop (which forces the computer to rebuild it fresh) and it worked fine! Then one at a time 'as it was needed, I put back the preferences for other applications (mail, itunes etc). Turns out no preferences was better than whatever corrupted preference was in there causing the problem. You know what I mean. If no preferences are there the applications start over building it new automatically. So it was like a preferences restart. sorta.
Unfortunately, since I dont have applecare I had to spend 50 bucks on the phone with apple to figure this out. It's amazing how long it took them to actually pinpoint the problem. Hopefully if anyone gets that error in the future they'll find this post on google and save some bucks.

Can not install NVIDIA Display Drivers

Similar Messages

Maybe you are looking for