Can not install trial PSE6 on Mac 10.5.6

I have downloaded the trial version, but everytime I try to install it, it gets to the end of the process and I get the following message:
Successfully installed: 1 component
Shared components
Errors: 2 components
Adobe Photoshop Elements/component install failed
Shared components/component install failed.
I tried to install on an external drive as well and found Bridge CS3 and Stock Photos CS3 in the folder.
I had installed a trial of CS3 sometime ago, but did not go ahead with it. There is nothing in any folder relating to PSE or CS3 that I can find. Any suggestions? Roger

Well, I'm pretty sure that at this point you may not be able to install the trial at all, since they're set up to think you're cheating on the 30 day limit if you try an uninstall/reinstall. The problem is the PS trial you had before. What you need to do is to download and run this:
http://www.adobe.com/support/contact/cs3clean.html
to remove the last bits of the CS3 trial before installing PSE 6. It won't hurt to try it, but whether you'll be able to run the PSE trial will depend on how far the installer got the first time, I'm afraid.

Similar Messages

Can not install flash player on Mac 10.5

I have a Mac with 10.5 I was trying to install the latest version of Flash Player and it did not work.
I used uninstaller,then downloaded install_flash_player_10_osx.dmg.Everything went fine until the end.
Now I get a - The following install step failed:run postflight script for plug in.
So now any website that need flash player I can not use.I have looked all over this web site for an answer.Please help me get flash player reinstalled,the lattest version if possible.

Is this a PowerPC? If so, see
What version of Flash Player should I use with my Power PC based Mac?

Can not install photoshop CS2 on Mac OSX. 10.9.5, It shows "error" no error number, suggest to contact the software supplier, only choice is to quit.

I tried to install Photoshop CS2 on Mac, OSX, 10.9.5.
By the end of the installation, it shows, error, but no error number for reference,
The only choice is "quit".
Please help

That is correct Das_Sad. CS2 will not run on Intel based processors under Mac OS. You will need to find a Mac computer with a PowerPC processor if you wish to run Creative Suite 2.

HT3423 Hi, I have logic express 9 in a cd but I can not install it on my mac, because near the end of the installation is interrupted, I can do?

hi

Welcome To  Discussions SBSODJ!
If the installer says, that you need an earlier version of OS X installed, then you are using an Upgrade disc.
Panther, is no longer available directly from the Apple Online Store, as Leopard 10.5.x, is the most up to date OS.
But, if you know what to look for, a Full Retail Version, of the Panther Install CDs, can be purchased, at some online Apple retailers, Amazon, eBay, FastMac, HardCore Mac, AllMac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Caveat Emptor!
If any are presently available, examine these items very carefully, and if in doubt, ask questions of the seller before purchase!
Panther On eBay
Review these KB Articles, for the Panther System Requirements, and the Additional Panther System Requirements.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

Purchased Acrobat XI, need to edit a form, I need livecycle to do so, can't install trial on my Mac?

My boss put Acrobat Pro XI on my Mac, I need the lifecycle to edit a form but don't know how often I'll need this tool. When I tried to download the trial, it didn't seem to support mac OS, what is the deal?

To create and edit PDF forms you need Acrobat Standard as a minimum.
If those forms require Extended Rights applied to do the following, you need Acrobat Pro:
Allow Adobe Reader users prior to version XI to save filled-in forms
Allow Adobe Reader users to complete digital signature fields
See http://www.adobe.com/products/acrobat/product-comparison.html
Normally the underlying page layout of a form is created and edited in the original application (Word, InDesign, etc.) and Acrobat is only used to add the interactive fields after the PDF has been created. Acrobat Pro can do basic editing of page content but it's a long way from a word processor!
'Acrobat Plus' is simply a subscription version of Acrobat Pro with Adobe's cloud-based storage and tools included. The software itself is indentical to the regular Pro version.

Camera Raw 5.2 not installing in PSE6 on Mac

Hi,
I've downloaded the update and opened it. It goes into an automatic install, skipping over "Destination Select". After it finished, I looked in the root Library/Application Support/Adobe/Plug-in/CS3/File Formats, and the only thing there is the older plug-in.
I can't seem to open the download to access a plug-in folder that I could drag in, and I don't know where the automatic installation ended up. Anyone else having problems with this setup?

I tried again this morning and cannot seem to find a plugin file after the download. Anybody have suggestions on how to get this to work on a Mac?

Can not install flash player on Mac

I was informed by shutter fly that I needed to update flash player. After a couple of hours and several different attempts I was unsuccessful. I have since uninstalled flash player and tried to re-install to no avail. I am running OSX 10.9.5 and safari 7.0.6. When I run the regular install from website I click on the install now tab (step 1 of 3) and then am taken to another page that says initializing with a long blue bar (step 2 of 3). Very briefly am I then presented with some instructions to go to download folder, etc. I have tried this probably 50 times and can never read the instructions fast enough. It then takes me to a black screen. I have also tried the offline option and it also takes me to a black screen. I have checked my download folder and there is never anything in there related to flash player. Please help!!

Download the offline installer here:http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g
This is what I got.....

Can not install Database Oracle8i (8.1.7) for Windows 2000/NT

I am not sucessfull in installing (Downloaded Unzipped then copied to CD) both version of Database "Oracle8i Release 3 (8.1.7)" Enterprise and Standard edition for Windows 2000/NT". After the start->run->autorun the CD spins for a minute then nothing happens. I tried running other files as well such as setup and install but still doesn't do anything.
Read the Installation document but can not find the answer, need help from anyone (Oracle expert to non-expert) is greately appreciated.
Server name = I am using Windows2000 "local" server.
Date/Time = Happened yesterday and today (March 3-4/2002)
Browser + Version = Microsoft Internet Explorer 5.0
O/S + Version = Windows2000 version 5.0
Error Msg = None (Will not install)
################################################################T
Thanks...

I am having the same problems!
Any help here would be great!! Stephen, Hi!, I think I know what the problem is....but I need your confirmation on my hypothesis. These are the scenarios:
PC#1
=====
In this computer it has operating system Windows2000 on C: Drive.
RESULT: SUCESSFULLY INSTALLED THE ORACLE 8I (8.1.7) Enterprise or Standard (trial version) on this PC.
PC#2
====
In this computer it has operating system WindowsME on drive C:
RESULT: When CD (Oracle 8i) was inserted on the CD Drive autorun was performed and Oracle 8i Installation screen pops up and I clicked on install and the Universal Installer shows up. A positive sign but I purposly aborted the installation.
PC#3
====
In this computer it has (2) operating system they are: Windows ME on Partitiion C: and another partition on F: the operating system is Windows2000. I Tried to install it on Windows2000 on partition F:
RESULT: CAN NOT INSTALL (trial version) ORACLE 8I (8.1.7) Enterprise or Standard version on F: Windows2000.
CD drive just spins for 15 seconds and nothing happens not even the Oracle Installation screen shows up.
MY HYPOTHESIS:
=============
The ORACLE 8I (8.1.7) Enterprise or Standard trial version either:
A) Can not be installed on another drive other than C: with a system with two (2) operating systems. and/or
B) Can not be installed with a PC with two (2) operating system.
Ben

I was wondering can i install windows on my mac when i have downloaded windows form the internet and do not have a C.D.??

I was wondering can i install windows on my mac when i have downloaded windows form the internet and do not have a C.D.??
Because when i get to the part in Boot Camp Assistant that says Start Windows Installation it says u need a disc... is there no other way??

Get the physical copy (disk) this will enable you to reinstall when (not if ) it messes up.
Make sure to purchase acopy that is compatible with your OSX

I have deleted safari on os x 10.7.1 , and now I can not install it , he say " This update requires mac ox 10.6 "

I have problems in the Safari browser , and I have deleted the program using the "Clean My Mac" App and now I can not install it , he say " This update requires mac ox 10.6 "
I would like to install the Safari browser on my system Lion os x 10.7.1 …..

Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Actually, you cannot download Snow Leopard. You downloaded a Snow Leopard updater.

Can not install Photoshop CS6 on my Mac.

I can not install Photoshop CS6 on my Mac.
When Mac run the infall program, there always show a message about asking to download Adobe Support Advisor.
But! I also can not find the file to download...
Ok... I just don't know why I can't install PS CS6....

yeah, I know the page.
But every time I go to download page, I can not find the link to download.
And if I click the "Downloads", the page will turn to Taiwan Adobe....

I do not remember my password of filevault and i can not install some softwares on my mac please help me

i do not remember my password of filevault and i can not install some softwares on my mac please help me

Are you sure FileVault is active? You could not have started up without entering the password.
If you are sure, see below.
If you forget the password and FileVault is on

I can not install Lion or Snow Leopard on my mac book pro

I can´t install Lion or Snow Leopard on my mac book pro. I tells me that it can not install because :can not get the extra components required to install mac os x.

Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: @(#)PROGRAM:Install PROJECT:Install-686.2
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: @(#)PROGRAM:IA PROJECT:InstallAssistant-209
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Hardware: MacBookPro5,3 @ 2.80 GHz (x 2), 8192 MB RAM
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Running OS Build: Mac OS X 10.7.2 (11C74)
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Env: PWD=/
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Env: SHLVL=1
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Env: __OSINSTALL_ENVIRONMENT=1
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Env: CI_DEFAULT_OPENCL_USAGE=0
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Env: OS_INSTALL=1
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Env: _=/System/Installation/CDIS/LCA.app/Contents/MacOS/LCA
Dec 31 22:56:47 localhost Install Mac OS X Lion[343]: Using distribution archive from /Volumes/Image Volume/Packages/OSInstall.mpkg
Dec 31 22:56:49 localhost Install Mac OS X Lion[343]: Using product <OSInstallDVDProduct> based on media at /Volumes/Image Volume at distance 10
Dec 31 22:56:49 localhost Install Mac OS X Lion[343]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Image Volume/Packages/OSInstall.mpkg at distance 5
Dec 31 22:56:49 localhost Install Mac OS X Lion[343]: Checking Software Update catalog URL http://swscan.apple.com/content/catalogs/others/index-lion-snowleopard-leopard.m erged-1.sucatalog
Dec 31 22:56:49 localhost diskmanagementd[332]: DM ->T+[DMToolBootPreference getPartitionBootability:]: inUDS=0x1144acc30=disk0s2=Mac os X
Dec 31 22:56:49 localhost diskmanagementd[332]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMBootable=1            (bootable right now without any further action)
Dec 31 22:56:49 localhost diskmanagementd[332]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMBootCapable=0         (bootable if you call MKCFPrepareBootDevice)
Dec 31 22:56:49 localhost diskmanagementd[332]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMBootSurgeryRequired=0 (for primitive MBR on BIOS, add boot block and loader)
Dec 31 22:56:49 localhost diskmanagementd[332]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMFSSurgeryRequired=0   (for primitive MBR on BIOS, add boot block and loader)
Dec 31 22:56:49 localhost diskmanagementd[332]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMNewfsRequired=0       (bootable with MKCFPrep but it will rudely carve)
Dec 31 22:56:49 localhost diskmanagementd[332]: DM <-T+[DMToolBootPreference getPartitionBootability:]: MKerr=0 out=4=0x4
Dec 31 22:56:49 localhost Install Mac OS X Lion[343]: No available package ref for compatibility update. Ignoring.
Dec 31 22:57:04 localhost Install Mac OS X Lion[343]: Using product <OSSoftwareUpdateCatalogProduct> from product keys 11C74_ServerEssentials at distance 25
Dec 31 22:57:06 localhost Install Mac OS X Lion[343]: Created IATool object:15d114d0
Dec 31 22:57:08 localhost Install Mac OS X Lion[343]: Preventing machine sleep.
Dec 31 22:57:08 localhost Install Mac OS X Lion[343]: Using product IA_PKSecureNetEnabledProduct <file://localhost/Volumes/Mac%20os%20X/Mac%20OS%20X%20Install%20Data/> at distance 5
Dec 31 22:57:08 localhost Install Mac OS X Lion[343]: Using mutable product path: /Volumes/Mac os X/Mac OS X Install Data
Dec 31 22:57:08 localhost Install Mac OS X Lion[343]: Retrieving 50 packages (3.766 GB)
Dec 31 22:57:42 localhost Install Mac OS X Lion[343]: Failed to verify Danish.pkg: xar_verify failed
Dec 31 22:57:42 localhost Install Mac OS X Lion[343]: Retrying file://localhost/Volumes/Image%20Volume/Packages/Danish.pkg after 1 failure(s)
Dec 31 22:57:42 localhost Install Mac OS X Lion[343]: Retrying file://localhost/Volumes/Image%20Volume/Packages/Danish.pkg after 2 failure(s)
Dec 31 22:57:42 localhost Install Mac OS X Lion[343]: Retrying file://localhost/Volumes/Image%20Volume/Packages/Danish.pkg after 3 failure(s)
Dec 31 22:57:42 localhost Install Mac OS X Lion[343]: Failed to retrieve file://localhost/Volumes/Image%20Volume/Packages/Danish.pkg (Error Domain=com.apple.PackageKit.PKFileDownload Code=3 "The operation couldn’t be completed. (com.apple.PackageKit.PKFileDownload error 3.)")
Dec 31 22:57:42 localhost Install Mac OS X Lion[343]: Failed to download package from file://localhost/Volumes/Image%20Volume/Packages/Danish.pkg and no alternate source.
Dec 31 22:57:42 localhost Install Mac OS X Lion[343]: Stopped operation queue with Error Domain=IAErrorDomain Code=402 "Kan ikke hente de ekstra komponenter, der kræves til installering af Mac OS X." UserInfo=0x115d8b540 {NSLocalizedDescription=Kan ikke hente de ekstra komponenter, der kræves til installering af Mac OS X., NSUnderlyingError=0x117362000 "The operation couldn’t be completed. (com.apple.PackageKit.PKFileDownload error 3.)"}

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

Hello, I have purchased a license of Adobe Acrobat Pro DC (Mac, Italian) but I can not install it.

Hello, I have purchased a license of Adobe Acrobat Pro DC (Mac, Italian) but I can not install it. Error: failed installation, installer has encountered an error that prevented the installation. Contact the software manufacturer for assistance.

Please post the file install.log that is located at "/var/log/install.log" to a site so that the forum members can have a look at the installer log.

Can not install trial PSE6 on Mac 10.5.6

Similar Messages

Maybe you are looking for