Can not install VXI-MXI-2 driver under Windows XP

I have a new IBM IntelliStation M Pro PC with Windows XP Pro (but only Service Pack 1) that is having a hard time getting the VXI-MXI-2 PCI driver installed. It reports: "There was a problem installing this hardware: PCI-MXI-2 This device cannot start. (Code 10)".
Taking a look at some issues raised on the "Troubleshooting PCI-GPIB, PCI-DAQ, PCI-MXI-2, PCI-IMAQ Installation Problems" page, I have dealt with the following:
1) "PCI Bus Mastering" - originally this was turned off for both PCI slots.  I have turned both slots on, but no change.
2) PCI slots - I have tried the card in both PCI slots in this machine.
3) "More that one PCI bridge (very rare)" - my system reports two other PCI bridges: one for the SCSI interface to my hard drive and another for use of the 1394 port. Could this be the issue and what would be needed to fix it?
Thanks!

NI-VXI 3.3.1 installs an older version of NI-VISA (2.6, I believe)
which sometimes has problems with newer systems and results in this
"Code 10."  Installing the latest version of NI-VISA (currently
3.5) should fix the problem.
Robert Mortensen
Software Engineer
National Instruments

Similar Messages

  • Can not installed the Sound card driver for Windows XP SP3?(CQ40 333TU)

    my notebook model is CQ40 333TU, i downgraded from windows vista to windows xp sp3, but i can not installed the sound driver?  and i can not found the xp driver in hp web, help me.

    This might help>>>
    http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=26
    http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=230
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • CAN NOT INSTALL ON THIS HARD DRIVE

    I am currently running 10.3.9 on my 450 Mhz G4 which has 640 MB SDRAM but when I try to install my Tiger CD's (actually looking for the Archive and install option) I get a message that I can not "install Tiger on this drive". I own the CD's and actually have installed them on my wife's mac mini, so I know that the CD's are good. Thoughts anyone?

    Malcolm,
    'Will have to check with the previous owner of the mac mini as I do not know if they were purchased seperate from the mac mini or came with that HD. But, thankyou; as, I believe that you have me going down the right road.
    Bob

  • Can't install mcafee in vmfusion running under windows xp; error is not understandable; any ideas?

    Can't install mcafee in vmfusion running under windows xp; error is not understandable; any ideas?

    Please repost in a VMWare Fusion forum, you can find it at:
    http://communities.vmware.com/community/vmtn/desktop/fusion.

  • Hp dc 7800 how can i install pci serial port driver on windows 8.1

    hp dc 7800 how can i install  pci serial port driver on windows 8.1  please help
    This question was solved.
    View Solution.

    Hi:
    Download and install the W7 AMT driver.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&sp​...

  • Can not install JRE since Update 23 on Windows 7 x64

    There's something different with JRE since update 23. I can install until update 22 just fine, but update 23 and 24 just does not install. I always install with offline installer. I have the error from event manager
    Registo de falhas 1729745976, tipo 5
    Nome do Evento: BEX
    Resposta: Não disponível
    ID do CAB: 0
    Assinatura do problema:
    P1: jre-6u24-windows-i586.exe
    P2: 6.0.240.7
    P3: 4d4a6389
    P4: StackHash_b5a0
    P5: 0.0.0.0
    P6: 00000000
    P7: 01520c18
    P8: c0000005
    P9: 00000008
    P10:
    Ficheiros anexados:
    C:\Users\David\AppData\Local\Temp\WER594C.tmp.WERInternalMetadata.xml
    Estes ficheiros poderão estar disponíveis aqui:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_jre-6u24-windows_bd6be64fa1149bd9c119e67bb41fa19c1f651ab_17aa7390
    Símbolo de análise:
    A procurar novamente solução: 0
    ID do Relatório: 841a01be-3ac1-11e0-b844-001fd09a9b10
    Estado do Relatório: 0
    I have uploaded the report to: http://www.mediafire.com/?1nb7v5dc1hodgf8

    Reviewing the preceding posts, I saw the suggestion to remove a java folder in c:"Program Files ..."
    Imagine my surprise to discover that there was such a folder on my system after my uninstalls of java using Revo Uninstaller.
    There were also java executables in the windows, System32, SysWOW64 subfolders.
    After I again uninstalled the jdk 64 bit, I deleted all folders that seemed to contain java
    When I reinstalled jdk 64 update 24 to c:\s\java, I was again not asked where to install the jre.
    Inspecting the folder tree at c:\s\java I can see c:\s\java\jre but no folder c:\s\java\jre6
    However, after this install I am able to execute the java command without seeing an error.
    I don't think I'm fully functional yet because an attempt to start eclipse 3.6 (Helios) gives an immediate error windows "Failed to load the JNI shared library "c:\s\java\bin\..\jre\bin\server\jvm.dll"
    Since the file c:\s\jre\server\jvm.dll does exist, I'll try re-installing eclipse.

  • I can not install firefox 6 in my laptop (windows 7 64 bit), whats wrong?

    I have tried to install other versions of firefox to install but it is not working. my OS is windows 7 ultimate, 64 bit. Is any version of firefox compatible with windows 7 ultimate, 64 bit?

    What other versions have you tried. Several of us and my family members had complete success installing [ftp://ftp.mozilla.org/pub/firefox/releases/5.0/win32/ FireFox 5.0] over top of FireFox 6.xx and thus solving all the problems with the current FF versions.
    This is on Win 7 64x (my computer), my wife's Vista machine and a friends older WinXP computer.
    Provide some detail on your previous efforts, perhaps someone here can help.

  • Can not install Icloud 4.1 on Windows 8.1 error 2343

    Can not install Icloud version 4.1 on Windows 8.1 keep getting error 2343 have downloaded Repair tool kit that was suggested to fix problems. This has not worked have tried to download only from tools this has not worked keep getting same error.

    Can not install Icloud version 4.1 on Windows 8.1 keep getting error 2343 have downloaded Repair tool kit that was suggested to fix problems. This has not worked have tried to download only from tools this has not worked keep getting same error.

  • Touchsmart IQ524 hard drive crashed. Ran Recovery CDs and I get an error Windows can not install on

    I have an HP Touchsmart IQ524 which the hard drive crashed.  I replaced the hard drive with the exact same model.  I run the Recovery CDs (which I purchased from HP website) and it goes all the way through the process and after the reboot I get a message that "Windows can not install software on this hardware" - so it never completes the process.  I have formatted the hard drive and bought and returned 3 hard drives.  Any suggestions and assistance will be greatly appreciated.

    Hi:
    I love recovery disks when they work, and HATE them when they don't.
    Fortunately, I have a workaround for you which isn't as good as a recovery disk, but it is better than pulling your hair out, and getting nowhere.
    First of all, before you try this, did you perform the recovery with only the keyboard and mouse connected?
    Did you buy the same size or larger hard drive?
    If your answer to either question is no, then that may be the problem.
    Now to the workaround...
    If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
    Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
    Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
    The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
    The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
    When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
    I selected No, make the ISO file.
    It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
    I tested both of them on my hp dc7100 CMT desktop PC, they worked perfectly.
    When you enter the product key, it knows what version of Vista you have.
    http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
    After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
    Paul

  • Can not install device driver in Windows 8.1

    I can not install driver of my webcam(Odyssey OD 202) windows 8.1 (upgraded from windows 8)
    The USB webcam is shown in Device manager.
    When I attempt to update driver and search for it automatically it shows the following message.

    Hi Atanu Barai,
    There may be a compatibility issue between the Microsoft driver and the device . I agree with ZigZag ,you may need to download the driver from the manufacturer website .Please pay attention to the compatibility ability issue with the
    Windows 8.1 when you try to download the driver.
    If the issue persists, try to plug in the device with another USB port to have a check .To verify whether it is caused by the USB controller ,we can try to connect another USB device to have a check.
    Meanwhile ,please check the Event Viewer for related information.
    Best regards

  • I have lost my iMovie program and I can not install a new one. My computer says that it is not possible to download anything on my main drive

    I have lost my iMovie program and I can not install a new one. My computer says that it is not possible to download anything on my main drive

    How full is your drive?  You need at least 10/15% of free space.

  • Hi, i have question about my macBook pro.  I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have.

    I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have about Mac´crack that **** formatted and has really nothing to the HD. what do I do??
    <Edited by Host>

    Cami87,
    which model MacBook Pro do you have, and which version of OS X is installed on it?

  • Can not install 10.5 on external hard drive.

    This is the situation I took my old hard drive from my old desktop that has 10.4.11 installed and put it into an external USB hard drive case.  It shows up on the desktop but I can not install 10.5 on it from the disk.  Using disk utility it indicates that the drive is bootable.  But I can not get to be read as a destination drive.
    I want to use this drive in part for parallels desktop and windows NT.

    Yeah, that's it. The Partition Map Scheme is set for APM, which is OK for a disk on an Intel machine, unless you want to Install Leopard or upgrade Leopard on it. That's when you need to use GUID.
    You can use SuperDuper to create a clone on an APM drive and an Intel machine will boot just fine, you just can't run the updates. I do this for a drive that I've partitioned into two parts, one for my bootable clone, and the other for TM.
    I have SuperDuper clone my boot drive to the external drive every week and don't worry about updating the clone. That way, if an upgrade screws up my machine, I can boot from the other drive and reclone the last working system to my boot drive.
    I only use TM to track older files, on the fly, and don't want to have to boot from the DVD to restore my machine and get back to work. I do the work I want right away with the clone and then any changes are cloned back to the original boot drive when I have time.

  • I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

  • It says "can not install the driver: could not find media for this driver"

    I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says  "can not install the driver: could not find media for this driver", how ever i get a beep for every error message.  In my device manager there is no UAA and in services.msc windows audio is started.
    I have tried almost everything on net but not able to solve this, plz help.

    vendor wrote:
    = No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
    I think there is not.
    Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
    Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
    Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
    IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
    jutapa

Maybe you are looking for

  • No connectivity - ports up and down?

    I have a 2950 switch which we use to for connectivity to VOIP phones and terminals/pcs on the floors. At random times during the day maybe twice 2-3 hour span, we lose connectivity between two of the terminals and our server which is connected to the

  • Access Offline Registry via Command Line

    Thanks, everyone. The goal is to do this inside a windows PE. Specifically it is for taking care of infection. I know it can be done with regedit, but I want this done automatically. Not asking for the work to be done for me, but I can't find any doc

  • Lightroom Catalog size...

    I have a problem. I am running Lightroom 4.1.1 It is running on a windows Vista home premium 64 bit computer. I have in my catalog about 110,000 pictures. I have some rather serious stability issues, getting the blue screen of death about once every

  • Ipod replacement

    what's the replacement cost of classic 160GB ipod in india

  • Find the call to workflow in standard transaction

    Hi, I have a standard transaction VD02 for SD module. How to know from where it launches a workflow? When I put the SAVE button int transaction, the isn´t send. The coupling of events is correct. Thanks