Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

Similar Messages

Can you install windows 8 using boot camp?

I open up boot camp and it say it can install windows 7 or later versions, and i have a widows 8 disk.

Welcome to Apple Support Communities
You have a compatible computer, so you can install Windows 8 with Boot Camp. Make sure you mark the option to download the Windows support software, that you will burn into a USB drive and you will install after installing Windows with Boot Camp.
If you need help installing Windows 8 with Boot Camp, see > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

How can I install windows 7 using boot camp, if the partition will not format correctly?

Hi All,
I'm new to this forum and have had a chance to look around a little bit, but haven't really found an answer to the problem that I'm having.
I have an imac and I'm attempting to use boot camp. I have used it in the past, with prior versions of mac os x, but this is the first time that I have tried it with 10.6.8. The first thing I found out is that I can't use Windows XP, even with service pack 2 installed, because it doesn't find the "boot camp" partition. So, I recently obtained a full retail copy of Windows 7 and have been trying to install it. I have no problem with the boot camp assistant creating the new partition, 200 GB. However, when I insert the Windows 7 DVD and the computer restarts in the Win 7 install screen it tells me that I cannot install Windows on the selected partition (which I expected to see.) So I choose "format" the further format the partition. It doesn't ask me how I would like to partition this, but just seems to start. All seems to go fine until it finishes and i see the same message of "Windows cannot be installed in the selected partition." I can click on the format tab endlessly but it still doesn't seem to work. Does anyone have any ideas? I've called Apple and their technicians keep telling me that I need to reinstall the Mac OS again, which I've tried. It doesn't seem to help either.
Thanks in advance for your help,
DTK

David Kaff wrote:
Yes, I choose "Format" under the advanced options screen. It seems like it formats, but then I get the same message of "Windows cannot be installed to this disk. The selected disk is of the GPT partition style." I can continue to click "format" but i keep getting the same error.
There is the answer, right in front of us ....
Delete the bootcamp partition and start again the correct partition type is GUID but BootCamp should take care of that automatically so try again.

Can't install Windows 7 using Boot Camp

Hi, I need some help here, I'm trying to install Windows 7 on my MacBook Pro (bought late 2012) using Boot Camp.
I first open BC, click on the "Creat and Installation disk" and "Download software" optionsI used an ISO downloaded from the MS site (SW_DVD5_NTRL_Win_7SP1_All_Lng_Patch_Client_Server_X17-23698.ISO)
Then, when it is finished I leave the USB plugged in and hit on Install Windows 7
But I get this error that means "Can´t find Installation disk"
Do I actually need a disk?, Then why did I created the USB for? THe funny thing is that I have already done it before, I know it asks you to choose your partition size, I have already Installed Windows but i dind´t know it was a 32 bits disk, so I deleted the partition and I'm trying it again but can´t.
Please someone help me out.
Thanks in advance.

Hold the option while turning on the computer. You should see your statup drives. Just choose the OS X drive and eject your disc once in OS X.

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

Stuck during Installing windows 7 using boot camp

Hi,
Anybody please help. I tried to install Windows 7 using boot camp, but always stuck halfway...please see the attached image for my failed attempt step by step. Please correct me, if i miss anything
1)
2) Then when click continue, this error came out,
I did watch in youtube how to install windows using bootcamp, there is no this type of notification supposed to come out.
3) Then , I continued, created the window installer using bootable pen drive and download the windows support.
4) But the, It just END here without proceeding to install window.
WHY IT JUST STOP HERE???PLEASE, SOMEONE TRY TO EXPLAIN AND GUIDE ME...AND WONDER IF U SEE THE NEXT IMAGE, I NEVER CAN JUMP STRIGHT TO THIRD STEP (INSTALLED OR REMOVE WINDOW), SINCE I DO HAVE THE BOOTABLE WINDOWS INSTALLER AND UPADATED SUPPORT SOFTWARE. I cant select the third option, it just greyed...
I would be great if somebody can help me out...I did try to install the windows almost 10 times already, never success...
I am using Macbook Pro Retina 13in (late 2013), Maverick 10.9.2, 2.8 Ghz Intel core i7, 8GB 1600 Mhz DDR3

Turbostar,
Yes, i do have more than one partion on my mac hard disk, so u meant, boot camp cant work with multiple partions?
If i need to format hdisk, this will be the second time, with my 3month old macbook..

I tried installing Windows 7 using Boot Camp, but it didn't work, I don't know how to "unparticion" the memory I gave to Boot Camp, and Boot Camp "vanished", help...

I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...

Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue.

How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?

How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?

You can't. Only Windows 7 is supported in that configuration.

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

Can I install Windows 7 with boot camp, but install all my PC games for it on an external hardrive?

I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, which would allow for a faster gameplay, USB 3.0 or Thunderbolt? as fast gameplay is important
Thank you

How to move steam to another drive:
Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
Move the steam folder over to the secondary drive you want it on
Open the "steam.exe" and it will reconfigure steam
Log in and BAM! All your games are recognized
Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
Run Steam Mover and have it move the game to that location and you are done!
Now go play the games you want!
How to have steam on the SSD while having the games on either the SSD or HDD:
Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
Have the "steam.exe" to a folder made on the C:\ drive (C:\Users\Sean\Steam)
Have the "steamapps" folder on the HDD you want to store your games (D:\User\Program Files\Steam\steamapps)
Make a junction from the "steamapps" folder to the SSD folder with the "steam.exe" in it
Open the "steam.exe" and it will reconfigure steam
Logged in and BAM! All your games are recognized and steam is on the SSD and the games on the other drive.
Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
Run Steam Mover and have it move the game to that location and you are done!
Now go play the games you want!

Problems installing Windows 7 using boot camp assistant

I have followed the guide form the Apple website and using boot camp assistant, I have managed to install Windows 7 Home Premium up to a point.
When the IMac re-boots and starts up in Windows 7 it tries to complete the installation but neither my mouse, keyboard or trackpad work.
This means I cannot enter a computer name in the first windows 7 screen, which in turn prevents the completion of the installation and the installation of the drivers for the keyboard, mouse and trackpad.
Does anyone have an idea how I can complete the installation?
I am using a 2012 IMac 27".
Thanks

Hi,
yes I used boot camp for everything and followed what was advised on the Apple web page. The USB remains in the back of the machine and it did download the windows drivers etc, but it doesn't seem to have installed them yet.
If I'm reading help manual properly, it is supposed to install them after windows 7 has been installed. But I can't get past the first Windows screen asking me to name my windows computer.
If I obtain a USB keyboard will that run without any drivers being required?
Thanks

Can I install Windows 7 with boot camp on my computer, but install all my PC games for it on an external hardrive?

I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, would USB 3.0 be ok, or would thunderbolt be a better option (hoping its USB)
Thank you

you will be fine and either are more than enough for even an SSD.
NTFS of course.
Might look thru Google to see if anyone has managed to boot Windows from Thunderbolt, I think someone managed after install and then made a restore image and placed on Tb storage device.

My newly macbook air can't install windows 7 via boot camp even I have formatted the SSD in the window installer

I have insert the windows 7 disc as the instruction. Every things go fine at the starting, until the part that need to select the harddisk partition to install the windows.Even I have formatted the harddisk in the window installer, I can't continue my installation. Will it be the problem that the macbook air is using the SDD?

I'm having the same problem. Yes, I followed the instructions completely all the way through clicking Format under advanced options for the BOOTCAMP partition. It appears to format it correctly, but when I click Next, I get the message "Setup was unable to create a new system partition or locate an existing system partition."
I read in the forums that I should unplug the USB drive. I tried that and instead, get the following message:
"Windows is unable to install to the selected location. Error: 0x80300001"
I have a new Retina display running Mountain LIon and the latest of everything. I tried installing both Windows 7 Home Premium SP1 ISO and Windows 7 Pro SP1 ISO, both downloaded from Microsoft. I am booting from a 32GB USB3 drive. I used Boot Camp Assistant for everything.
I removed my old Windows XP VM from Parallels, wiping everything. The only other thing I can think of is that my MacOS is connected to Time Machine, but MacOS is not running while Windows is trying to install itself.
Any ideas? Thanks!

Top 15 or 20 mistakes I made installing Windows XP using Boot Camp/Leopard

There are pitfalls installing XP in Boot Camp. I'm pretty sure they are mostly covered somewhere on the Apple Bootcamp Support page. Here's what this Windows virgin found in the past few days installing XP on my MacBook Pro running Leopard. By all means, feel free to correct or add to my comedy of errors.
1) First run Software Update on your Mac to make sure you are working with the newest Mac software and firmware. If you are obsessive, run Disk Utility afterwards and restart. (I did this)
2) Follow the instruction in Apple's Boot Camp Installation Guide pdf to the letter. Don't skip anything. Don't assume anything. Print it if you can't run it on another machine during the Windows install. (I looked at it, not well enough.) Read #3-7 before you start the install.
3) Run Boot Camp Setup Assistant to "preformat" a Windows partition. 5 gigs is too small a partition and means more work later since XP eventually used up 5.6 gigs of my 32 gig partition (26.4 gigs free after a fully updated install of Win XP Service Pack 3 + anti-virus software + Adobe Reader + one app). (I avoided the too-small partition by dumb beginner's luck but see #4)
4) If you mess up your Windows partition and decide to start over, restart in Leopard and use Mac's Boot Camp Assistant to remove any inoperative Windows partition. If you are obsessive, run Disk Utility afterwards and restart. Then use Boot Camp Assistant again, as in #3 (I got to use this feature, too.)
5) Use the right Windows software. Win XP Service Pack 2 does install and can be updated after you have a solid XP installed with driver. Before you update, read #8-10. (I managed to buy the right XP software)
6) During installation, with the Windows Installer, you must reformat the Windows partition created by the Boot Camp Assistant. Don't get fancy and repartition: just format. Read pp. 13-14 of the Apple Boot Camp Installation Guide pdf. The Windows NTFS format using long, slow, careful reformat takes a looonnng time, long enough to make me think the installer was hung, except the cursor was blinking. (I did this but only after I tried to install the dumb way, without the Win installer reformat. If you don't reformat, you'll see a black screen, "Disk Error" with a flashing cursor at the top. Time to refer to #4.)
7) When Windows reboots after a successful install of XP SP 2, immediately eject the Windows install disk using Windows and immediately insert the Leopard Disk to install Windows drivers. (I did this. Some report problems with this step, but it worked for me.)
8) When you restart in Windows, run Windows Update to install everything except Service Pack 3. Mouse around the update feature a bit. If you don't update to SP 3, there is an optional install of a new IE 7 and an XP update that fixes some installer issues. (I did the optional install before I figured out #9 and tried to install SP 3 a couple of times. See #10 for what happens if you try to install SP 3 before #9.)
9) Using IE 7 in XP, go to the Apple Boot Camp page to download and install Boot Camp 2.1 Update For Windows XP. This installs on the Windows side, not in OS X. ( I did this, throwing caution to the wind and choosing "Run" when the download options of "Run" or "Save" appeared.) When BCUpdateXP.exe opens, the installer asks you to choose repair/update or uninstall. Choose repair/update. I think the machine needs a restart.
10) Now install XP Service Pack 3 using Windows Update. If you try to install XP SP 3 before the Boot Camp 2.1 Update for Windows XP, you will receive the following error message:
"There is not enough disk space on C:\WINDOWS\$NtServicePackUninstall& to install Service Pack 3. Setup requires a minimum of 4 additional mebabytes of free space or if you want to archive the files for uninstallation. Setup requires 4 additional megabytes of free space. Free additional space on your hard disk and then try again. Error Code 0x8007F003." It's a lie, assuming you set up a large enough Boot Camp partition at the outset. Both Windows and Disk Utility will tell you the size and available space of the Boot Camp partition.
Like I said, everyone is welcome to add the next 5 or 10 ways to mess up. Without Search, this forum is rough.

Because I created FAT32 partition using Boot Camp tool few days ago I installed my custom copy of Windows XP with SP3, IE7 and WMP10 integrated using nLite (for WMP10 integration use RVM Integrator). I did not use Boot Camp tool this time - I just booted CD using Option key. Then I installed Boot Camp 2.0 drivers you can find on Mac Disk 1. After this I installed Boot Camp drivers 2.1 update. In Add or remove Programs I checked drivers - I uninstalled old drivers which call identical, but you can skip this. Everything works fine BTW it is better to format your partition to NTFS - you have much less disk errors, you do not waste time for disk errors scans during Windows startup, your data are much more safe. If you need NTFS write permissions use great tool Paragon NTFS for Mac OSX or open source NTFS driver.
Message was edited by: limo79

Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

Similar Messages

Maybe you are looking for